Jensen Tools JHD3510 User Manual

0 (0)
Jensen Tools JHD3510 User Manual

JHD3510

AM/FM/RBDS/WB/CD/AUX-IN/iPod Ready/SIRIUS Ready Heavy Duty Radio

Installation and Operation Manual

JHD3510

CONTENTS

 

System .................................................................................................................

1

Safety Information ..............................................................................................

2

Installation...........................................................................................................

3

Wiring...................................................................................................................

4

Basic Operation ..................................................................................................

5

Tuner Operation..................................................................................................

7

CD/MP3 Player Operation...................................................................................

9

Satellite Radio Operation .................................................................................

10

iPod Operation ..................................................................................................

11

Care and Maintenance......................................................................................

12

Troubleshooting................................................................................................

12

Specifications ...................................................................................................

13

ii

JHD3510

SYSTEM

Features

Features of the Jensen JHD3510 mobile audio system include:

Full Dot Matrix LCD

Selectable Amber/Green Backlighting Color

AM/FM US/EURO Tuner with 30 Presets (12 AM, 18 FM)

RBDS (Radio Broadcast Data Service) with PTY Search

SIRIUS Radio Ready

Single In-Dash CD Player with MP3/WMA Playback Capability

CD ESP (Electronic Skip Protection) 40 Sec.

iPod Ready

Weatherband Tuner with NOAA Weather Alert

Mute

Pre-set Equalizer - 5 settings (Flat, Rock, Pop, Classical, Off)

Electronic Bass, Treble, Balance and Fader Controls

Output Power 45W x 4

Clock 12/24 Hour Selectable

Public Announcement (PA) Feature with Optional Microphone

IR Wireless Remote Control Ready (sold separately)

2-Channel Pre-amp Line Level Outputs

2-Wire Power with Non-Volatile Memory and Interior Power Clock/Time Support

Auxiliary Audio Input (Front 3.5mm Stereo Jack, Rear RCA)

Content List

Jensen Heavy Duty Radio

Hardware Kit

Wiring Harness

Male to male 3.5mm stereo plug patch cord

Installation Manual

Hardware Kit

FLANGE NUTS

15 AMP FUSE

 

DIN SLEEVE

MOUNTING STRAP

REMOVAL TOOL

 

MOUNTING SCREW

MOUNTING BUSHING

1

JHD3510

SAFETY INFORMATION

When Driving

Keep the volume level Iow enough to be aware of the road and traffic conditions.

When Washing your Vehicle

Do not expose the product to water or excessive moisture. Moisture can cause electrical shorts, fire or other damage.

When Parked

Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback.

Use the Proper Power Supply

This product is designed to operate with a 12 volt DC negative ground battery system.

Protect the Disc Mechanism

Avoid inserting any foreign objects into the disc slot. Misuse may cause malfunction or permanent damage due to the precise mechanism of this unit.

CAUTION:

THIS MOBILE CD PLAYER IS A CLASS I LASER PRODUCT. THIS UNIT USES A VISIBLE/ INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION IF EXPOSED DIRECTLY. BE SURE TO OPERATE THE MOBILE CD PLAYER AS INSTRUCTED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. PLEASE REFER SERVICING TO A QUALIFIED TECHNICIAN.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

Compatible Disc Types

Table 1: General Disc Information

Disc Type

 

Logo

 

Diameter/

Playback Time

 

 

Playable Sides

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio CD

 

 

 

 

12 cm single side

74 minutes

 

 

 

 

REWRITABLE

 

 

 

 

RECORDABLE

 

 

 

 

 

 

 

 

 

 

NOTE: CD-R and CD-RW discs will not play unless the recording session is closed and the CD is finalized.

Disc Maintenance

A dirty or defective disc may cause sound dropouts while playing. Before playing, wipe the disc using a clean cloth, working from the center hole towards the outside edge. Never use benzene, thinners, cleaning fluids, anti-static liquids or any other solvent.

 

 

 

 

 

 

 

 

 

 

Insert label

Do not bend.

Never touch

Wipe clean from

side up.

 

 

the under side

the center to the

 

 

 

of the disc.

edge.

 

 

 

 

 

DISC NOTES

Depending on the recording status, conditions of the disc, and the equipment used for recording, some CD-Rs/CD-RWs may not play on this unit. For more reliable playback, please adhere to the following recommendations:

Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x.

Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x.

Do not play a CD-RW which has been written more than 5 times.

Be sure to use only round CDs for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction.

Do not stick paper or tape on the disc. Do not use CDs with labels or stickers attached or that have sticky residue from removed stickers.

Do not expose discs to direct sunlight or heat sources.

NOTE: A disc may become scratched (although not enough to make it unusable) depending on how you handle it and other conditions in the usage environment. These scratches are not an indication of a problem with the player.

2

JHD3510

INSTALLATION

This unit is designed for installation in vehicle cabs with an existing 1-DIN radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. See the dealer where the radio was purchased for kit availability. Always check the kit application before purchasing to make sure the kit works with your vehicle.

Before You Begin

1.Disconnect Battery

Before you begin, always disconnect the battery negative terminal.

2.Remove Transport Screws

Important Notes

Before final installation, test the wiring connections to make sure the unit is connected properly and the system works.

Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or other modifications to your vehicle.

Install the unit where it does not interfere with driving and cannot injure passengers if there is a sudden or emergency stop.

If the installation angle exceeds 30º from horizontal, the unit might not give optimum performance.

Avoid installing the unit where it will be subject to high temperatures from direct sunlight, hot air, or from a heater, or where it would be subject to excessive dust, dirt or vibration.

DIN Front Mount

1. Slide the mounting sleeve off of the chas-

Dashboard

sis if it has not already been removed. If it

 

is locked into position, use the removal

Bend Tabs

keys (supplied) to disengage it. The

182

 

removal keys are depicted in “Removing

53

the Unit” on page 3.

Screw Stud

2.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough, carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that there will be sufficient

space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary to firmly secure the sleeve to the dashboard.

4.Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve.

5.Follow the wiring diagram carefully and make certain all connections are secure and insulated with crimp connectors or electrical tape to ensure proper operation.

6.After completing the wiring connections, turn the unit on to confirm operation (vehicle accessory switch must be on). If the unit does not operate, recheck all wiring until the

problem is corrected. Once proper operation is achieved, turn the accessory switch off and proceed with final mounting of the chassis.

7.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

8.Attach one end of the

perforated support strap

(supplied) to the screw

Dashboard

 

 

 

stud on the rear of the

 

Support Strap

chassis using the hex nut

 

 

provided. Fasten the

Plain Washer

 

other end of the

Screw (5 x 25mm)

 

perforated strap to a

 

Rubber Bushing

 

secure part of the

Screw Stud

 

dashboard either above

Hex Nut (5mm)

 

or below the radio using

 

 

the screw and plain

 

 

washer provided. Bend

 

 

the strap, as necessary, to position it. Some vehicle installations provide cavity for rear

support. In these applications, place the rubber bushing over the screw stud and insert the radio.

CAUTION: The perforated rear support strap or rear rubber mounting bushing must be used in the installation of the radio. Installation without either may result in damage to the radio or the mounting surface and void the manufacturer’s warranty.

9.Test radio operation by referring to the operating instructions for the unit.

Removing the Unit

Removal Key

To remove the radio after installation, remove the plastic end caps, insert the removal keys straight back until they click, and then pull the radio out. If removal keys are inserted at an angle, they will not lock properly to release the unit.

Reconnect Battery

When wiring is complete, reconnect the battery negative terminal.

3

Loading...
+ 11 hidden pages