www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
|
|
This Data Sheet Includes Information On |
|
|
|
Jenn-Air |
|
• |
Product Model Number (s): |
• |
|
|
|
Over the Range Microwaves: |
|
|
|
M417B, M418B and M418W |
|
• |
Dimensions (Actual Size) |
• |
|
|
|
Cabinet opening depth: 13" |
|
|
|
Cabinet opening width: 30" |
|
|
|
Minimum mounting height from floor: 66" Min. |
|
|
|
Minimum mounting height from |
|
|
|
cooking surface: 30" |
|
|
|
Unit front height: |
14 5/8" |
|
|
Unit rear height: |
16 1/2" |
|
|
Unit depth: |
13" |
|
|
Unit width: |
30" |
|
|
Distance from unit face to open door: |
20 1/2 |
|
• |
Additional Information |
• |
•Electrical requirements: Voltage 120, single phase, 60Hz. AC. Ampere 15 or 20. 2 wire with ground circuit required. Locate outlet box in the cabinet above in the lower right hand corner, cut a 1 1/2" hole in the back right hand corner of the cabinet above for the units 3 prong cord.
•Units do not exhaust to the exterior.
•Units are designed for use above all Jenn-Air gas and electric grill ranges and grill range cooktops with downdraft ventilation.
•Wall construction should be a minimum of 2"x4" wood studding and 3/8" thickness drywall or plaster/both.
•M417B : Black.
•M418B : Black.
•M418W : White.
See page 2 for additional information
Subject to change without notice. This system is designed to |
|
be updated daily if necessary. Dimension Express is not |
|
responsible for use of superseded, voided, or outdated data |
|
sheets. Because of the difficulty or impracticability of deter- |
|
mining actual damages, liability of Dimension Express shall |
|
not exceed $50.00. |
|
Copyright © Dimension Express, 2000. |
274 |
13"
20 1/2
Door Open
(not to scale)
30" |
16 1/2"
14 5/8"
Bottom of unit is angled
|
66" Min. |
|
|
30" |
||
|
Minimum |
|
|
Minimum |
||
|
mounting |
|
mounting |
|||
|
height from |
|
height from |
|||
|
floor |
|
cooking |
|||
|
|
|
|
|
surface |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13" |
30"
Wall View (not to scale)
• NEVER reuse Data Sheets. Data Sheets are subject to change without |
• Call Dimension Express if you have any questions at (775) 833-3633 • |
notice. Dimension Express is a FREE service bureau and is updated daily, |
• Always refer to a current Code at a Glance or manufacturer directory • |
it makes far more sense to spend the time necessary to request new Data |
• Data Sheet codes change on the first of odd numbered months at 12:01am • |
Sheets for each project, as opposed to the problems, time, costs, and risks |
BN231 • A274B315 • 31469 • 002906 • 11410 • 12947 |
associated with reusing old Data Sheets. |