M170
Y
A
|
MW |
|
D |
Opening |
|
|
||
|
Lower |
|
B |
Oven |
|
Opening |
||
|
C
|
|
|
|
|
Dimensions |
|
|
|
|
|
|
|
|
|
|
|
|
|
E |
|
Inches |
|
Centimeters |
|
|
|
|
|
|||
|
|
|
A |
see chart below |
|
see chart below |
|
|
|
|
|
B |
see chart below |
|
see chart below |
|
|
|
|
|
|||
|
|
|
|
Cz |
48 |
|
121.9 |
|
|
|
|
|
|||
G |
F |
|
|||||
D |
16 1/16 |
|
40.8 |
||||
|
|
|
|
||||
|
|
|
|
E |
14 1/4 |
|
36.2 |
|
|
|
|
|
|
|
|
|
|
|
|
F |
22 |
|
55.9 |
|
|
|
|
G |
15 5/8 |
|
39.7 |
|
|
|
Trim Kit Dimensions |
|||
|
|
|
|
|
|
|
|
|
Model |
|
A |
B |
|
|
|
MK241 |
|
22 7/8" |
30 7/8" minimum |
|
|
|
|
|
|
|
|
|
|
MK271/MK272 |
|
25 1/2" |
28 1/2" minimum |
|
Notes: |
MK301/MK302 |
|
28 3/16" |
28 1/2" minimum |
||
|
|
|
|
|
Y.When installing this Kit above a built-in oven, check built-in oven installation instructions to determine cutout dimensions for the (lower) wall oven.
Z.For a new installation, the 48" height dimension to the bottom of the cutout
for the microwave oven is recommended. This places the microwave oven bottom at approximately 50" from the floor.
1.Model M170 is for use with trim kits for built-in installation. M170 cannot be used in countertop applications.
2.Trim kits to install M170 include: for 24" wall oven, use MK241B/W, installed dimensions are 17"H x 23 11/16"W. For 27" wall oven, use MK271B/W, installed dimensions are 17"H x 26 3/4"W. For 30" wall ovens, use MK301B/W, installed dimensions are 17"H x 29 3/4"W.
These appliances have been designed in accordance with the requirements of various safety agencies and comply with the maximum allowable wood cabinet temperatures of 194 degrees F. If these appliances are installed with cabinets that have a lower working temperature than 194 degrees F, discoloration, delamination or melting may occur.
Important: Because of continuing product improvements, Jenn-Air reserves the right to change specifications without notice. Dimensional specifications are provided for planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.