Jenn-Air JED8430BDN, JED8430BDB, JED8430BDF, JED8430BDS User Manual

ELECTRIC DOWNDRAFT COOKTOP

PRODUCT DIMENSIONS

M

P

Q

A 28 7/8 1/16 73 .3 .2

INCHES CENTIMETERS

B 21 3/8 1/16 53 .7 .2

C 10 25 .4

D 6 3/8 16.2

F 16 1/2 41 .9

G 2 mi n 5.1 mi n

A

B

C

G

D

F

H 17 1/2 min 44 .5 m in

J 12 1/2 3 1.8

K 12 1/2 3 1.8

L2 2 mi n 5.1 mi n

M 4 5/8 11.7

P 29 3/4 75.9

Q 22 55.9

MODEL SKUs

JED8430BDB
JED8
JED8
JED8

430BDF
430BDN
430BDS

3

H

K

L

J

Style of product may vary from picture

NOTES:

1. Where possible, 6" (15.2 cm) is recommended for motor blower service. Minimum clearance of 1" (2.5 cm)
is required to sidewalls and 3/4" (

2. Provide 2" minimum (5

3. Unit may be safely installed as near as 0" (0 cm) from a side wall if space limitations requires.
However, a side clearance of at least 6" (15.24 cm) is recommended for optimum ventilation.

4. Vents up to 60 equivalent feet.

5. This appliance has been designed in accordance with the requirements of various safety agencies and comply
with the maximum allowable wood cabinet temperatures of
that have a lower working temperature than

Electrical requirements: Provide for
and wired according to local electrical codes.

.1 cm) cabinet clearance to motor for cooling purpose.

1.9cm) to rear wall.

194˚ F. If these appliances are installed with cabinets

194˚ F, discoloration, delamination or melting may occur.

120/240 or 120/208 VAC, 60 Hz. The unit must be properly circuitprotected

Important: Because of continuing product improvements, Jenn-Air® reserves the right to change specifications without notice. Dimensional specifications are provided for
planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.