Files for SVE47600
Size:
325.27 Kb
Download

 

www .jennair .com

30"

Electric and Dual-FuelTM Slide-InRange

A C

B

F

H

G

Z X

E

E

D

Y

Z

Slide-In

 

 

Installation

I

Free Standing

Installation1

SVE47100, SVE47500,

SVE47600, SVE87600, SVD48600

Dimensions

 

 

Inches

Centimeters

 

 

A2

35 1/2

90.2

 

 

B

29 7/8

75.9

 

 

C3

26 3/8

67.0

 

 

D

35 3/8 minimum

89.9 minimum

 

E

29 7/8

75.9

 

 

F

21

53.3

 

 

 

 

 

 

 

G

29 3/8

74.6

 

 

H

1/4

.6

 

 

 

 

 

 

 

I

30 1/8 ± 1/16

76.5

 

 

 

 

 

 

"Drop-InLook" Option:

Order "Drop-InLook" Kit model A513. Attach custom wood panel to supplied metal panel and clip to range front (lower panel). Can be used with SVE47100, SVE47500, SVE47600, SVE87600, SVD48600.

Notes:

1.Free-Standinginstallation requires optional backsplash. Unit does not overhang on counter. Side panels required if sides are exposed.

2.May vary depending on leveling legs.

3.Excluding handle. Dimension given is from wall to front of oven door.

X.If overhang is 1/2" to 1", dimension X=22 5/8". If overhang is 1" to 1 3/4", dimension X=23".

Y.The minimum clearance required between cabinet and cabinet drawer edge is minimum 7/8".

Z.Select appropriate duct cutout

(see ducting installation instructions).

Important: Because of continuing product improvements, Jenn-Airreserves the right to change specifications without notice. Dimensional specifications are provided for planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.

5" Dia. Duct

5" to

5" Dia. Duct

 

Duct Length RecommendationsA

3 1/4" x 10"

 

 

 

 

 

 

 

Transition

 

5" Wall

(Maximum)B

 

Elbow

 

 

 

Cap

 

5" Dia.C

6" Dia. or

 

 

 

 

 

 

 

 

 

 

 

3 1/4 x 10"C

 

 

 

 

All ElectricD

10'

60'

 

 

Through the wall in back of

All GasE

10'

60'

 

 

 

 

 

Rear Duct (Inside Wall)

the grill-rangedirectly to

The Long Duct Run

 

the outside

 

With Jenn-Air'spowerful blower,

 

 

 

 

6" Dia. Elbow

 

 

 

Jenn-Airdowndraftgrill-ranges

 

 

 

can vent up to the equivalent of

 

 

 

 

60 feet.

 

 

 

 

5" - 6"

6" Wall

Here's how it works.

 

 

 

Transition

For duct runs equivalent to 30'

 

 

 

Cap

or less, install as received. For

 

 

 

 

Out from the right of the

F

, along

duct runs equivalent to 31' to

Down through the floor

60', simply snap out the restricter

appliance through cabinet toe-

the floor joists and through

ring on the blower inlet housing.

kick space to an outside wall

the foundation or an outside wall

 

 

 

 

See installation instructions for

 

 

 

 

specific information.

 

Notes:

A.For venting up to the equivalent of 60', use standard steel ducting and elbows.

B.IMPORTANT: See installation instructions shipped with product before selecting island cabinetry, making cutouts or beginning installation. For best performance, it is suggested that no more than three 90 degree elbows be used with 6" or 3 1/4" x 10" duct. Each foot of metal flex duct counts as two feet of rigid metal duct. Each flex elbow counts as two metal elbows. For longer duct runs of 31' to 60', the restricter ring on the blower inlet housing must be removed. 6" round or 3 1/4 x 10" duct must be used for ducting beyond 10' (up to 60'). Failure to follow ducting recommendations or use recommended ducting accessories may result in substandard performance.

C.Count each 90 degree elbow as 5' of duct.

D.When venting electric ranges, 5" diameter round duct may be used to vent straight out the back of appliance and directly through the wall for runs of 10' or less.

E.When venting dual-fuelranges, 5" diameter round duct must be used for runs of 10' or less.

F.When installing through a slab, it is essential that the system be properly calculated, designed and installed before the house is built, when the slab is poured.