Jeep Wrangle JK 2018 User Manual

0 (0)
Jeep Wrangle JK 2018 User Manual

2018 JEEP® WRANGLER JK USER GUIDE

Important

Get warranty and other information online – you can

review and print or download a copy of the Owner’s Manual, Navigation/Uconnect manuals and the limited warranties provided by FCA US LLC for your vehicle by visiting www.mopar.com (U.S.) or www.owners.mopar.ca (Canada). Click on the applicable link in the “Popular Topics” area of the www.mopar.com (U.S.) or www.owners.mopar.ca (Canada) homepage and follow the instructions to select the applicable year, make and model of your vehicle.

The driver’s primary responsibility is the safe operation of the vehicle. Driving while distracted can result in loss of vehicle control, resulting in a collision and personal injury. FCA US LLC strongly recommends that the driver use extreme caution when using any device or feature that may take their attention off the road.

Use of any electrical devices, such as cellular telephones, computers, portable radios, vehicle navigation or other devices, by the driver while the vehicle is moving is dangerous and could lead to a serious collision. Texting while driving is also dangerous and should never be done while the vehicle is moving.

If you find yourself unable to devote your full attention to vehicle operation, pull off the road to a safe location and stop your vehicle. Some states or provinces prohibit the use of cellular telephones or texting while driving. It is always the driver’s responsibility to comply with all local laws.

Congratulations on selecting your new FCA US LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality.

ALWAYS drive safely and pay attention to the road. ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume all risks related to the use of the features and applications in this vehicle. Only use the features and applications when it is safe to do so. Failure to do so may result in an accident involving serious injury or death.

This guide illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This guide may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment described in this guide that are not available on this vehicle. FCA US LLC reserves the right to make changes in design and specifications and/or make additions to or improve-

ments to its products without imposing any obligation upon itself to install them on products previously manufactured.

This User Guide has been prepared to help you quickly become acquainted with the important features of your vehicle. It contains most things you will need to operate and maintain the vehicle, including emergency information.

When it comes to service, remember that your authorized dealer knows your Jeep® vehicle best, has factory-trained technicians and genuine MOPAR® parts, and cares about your satisfaction.

HOW TO FIND YOUR OWNER’S MANUAL ONLINE

This publication has been prepared as a reference item to help you quickly become acquainted with the most important features and processes of your vehicle. It contains most things you will need to operate and maintain the vehicle, including emergency information and procedures.

This User Guide is not a replacement for the full Owner’s Manual, and does not fully cover every operation and procedure possible with your vehicle.

For more detailed descriptions of the topics discussed in this User Guide, as well as information covering features and processes not covered in this User Guide, the full vehicle Owner’s Manual can be accessed for free online in a printer-friendly PDF format.

To get the full Owner’s Manual or applicable supplement for your vehicle, follow the appropriate web address below:

www.mopar.com/en-us/care/owners-manual.html

(U.S. Residents)

www.owners.mopar.ca (Canadian Residents)

FCA US LLC is committed to protecting our environment and natural resources. By converting from paper to electronic delivery for the majority of the user information for your vehicle, together we greatly reduce the demand for tree-based products and lessen the stress on our environment.

LLC US FCA FROM WELCOME

1

HOW TO USE THIS MANUAL

HOW TO USE THIS MANUAL

Essential Information

Each time direction instructions (left/right or forwards/backwards) about the vehicle are given, these must be intended as regarding an occupant in the driver's seat. Special cases not complying with this rule will be properly specified in the text.

The figures in this User Guide are provided by way of example only: this might imply that some details of the image do not correspond to the actual arrangement of your vehicle.

In addition, the User Guide has been conceived considering vehicles with steering wheel on the left side; it is therefore possible that on vehicles with steering wheel on the right side, the position or construction of some controls is not exactly mirror-like with respect to the figure.

To identify the chapter with the information needed you can consult the index at the end of this User Guide.

Chapters can be rapidly identified with dedicated graphic tabs, at the side of each odd page. A few pages further there is a key for getting to know the chapter order and the relevant symbols in the tabs. There is always a textual indication of the current chapter at the side of each even page.

Symbols

Some vehicle components have colored labels whose symbols indicate precautions to be observed when using this component.

ROLLOVER WARNING

Utility vehicles have a significantly higher rollover rate than other types of vehicles. This vehicle has a higher ground clearance and a higher center of gravity than many passenger vehicles. It is capable of performing better in a wide variety of off-road applications. Driven in an unsafe manner, all vehicles can go out of control. Because of the higher center of gravity, if this vehicle is out of control it may roll over while some other vehicles may not.

Do not attempt sharp turns, abrupt maneuvers, or other unsafe driving actions that can cause loss of vehicle control. Failure to operate this vehicle safely may result in a collision, rollover of the vehicle, and severe or fatal injury. Drive carefully.

Rollover Warning Label

Failure to use the driver and passenger seat belts provided is a major cause of severe or fatal injury. In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by two million annually. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Always buckle up.

2

WARNINGS AND CAUTIONS

While reading this User Guide you will find a series of WARNINGS to be followed to prevent incorrect use of components which could cause accidents or injuries.

There are also CAUTIONS that must be followed to prevent against procedures that could result in damage to your vehicle.

MANUAL THIS USE TO HOW

3

4

GRAPHICAL TABLE OF CONTENTS

GETTING TO KNOW YOUR VEHICLE GETTING TO KNOW YOUR INSTRUMENT PANEL SAFETY STARTING AND OPERATING

IN CASE OF EMERGENCY

SERVICING AND MAINTENANCE

TECHNICAL SPECIFICATIONS

MULTIMEDIA

CUSTOMER ASSISTANCE

INDEX

6

GRAPHICAL TABLE OF CONTENTS

GRAPHICAL TABLE OF CONTENTS

INSTRUMENT PANEL. . . . . . . . . . .8

INTERIOR . . . . . . . . . . . . . . . . . . .9

7

GRAPHICAL TABLE OF CONTENTS

INSTRUMENT PANEL

 

 

Instrument Panel

1

— Air Outlet

7

— Climate Controls

2

— Instrument Cluster

8

— Power Outlet

3

— Radio

9

— Lower Switch Bank

4

— Assist Handle

10

— Power Mirror Switch — If Equipped

5

— Glove Compartment

11

— Horn

6

— Power Window Switches

 

 

 

 

 

 

 

 

8

INTERIOR

 

 

Interior Features

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

— Seats

5

— Switch Panel

 

 

 

 

 

 

 

2

— Power Window Switches

6

— Transmission Gear Selector

 

 

 

 

 

 

 

3

— Radio

7

— Four-Wheel Drive Gear Selector

 

 

 

 

 

 

 

4

— Climate Controls

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

10

GETTING TO KNOW YOUR VEHICLE

GETTING TO KNOW YOUR VEHICLE

KEY FOB . . . . . . . . . . . . . . . . . . .13

Key Fob . . . . . . . . . . . . . . . . . . . . .13

IGNITION SWITCH . . . . . . . . . . . .14

Ignition Key Removal . . . . . . . . . . . .14

REMOTE STARTING SYSTEM —

IF EQUIPPED . . . . . . . . . . . . . . . .15

How To Use Remote Start . . . . . . . . . .15

Remote Start Abort Message . . . . . . . .15

To Enter Remote Start . . . . . . . . . . . .15

To Exit Remote Start Mode Without

Driving The Vehicle . . . . . . . . . . . . . .16

To Exit Remote Start Mode And Drive

The Vehicle. . . . . . . . . . . . . . . . . . .16

General Information . . . . . . . . . . . . .16

SENTRY KEY . . . . . . . . . . . . . . . .17

Replacement Key Fobs . . . . . . . . . . .17

Customer Key Programming . . . . . . . .18

General Information . . . . . . . . . . . . .18

VEHICLE SECURITY ALARM —

IF EQUIPPED . . . . . . . . . . . . . . . .19

Rearming The System . . . . . . . . . . . .19

To Arm The System . . . . . . . . . . . . .19

To Disarm The System . . . . . . . . . . . .19

DOORS . . . . . . . . . . . . . . . . . . .20

Upper Half Door Window Removal —

If Equipped . . . . . . . . . . . . . . . . . .20

Front Door Removal. . . . . . . . . . . . . .20

Rear Door Removal (Four-Door Models) . .21

SEATS . . . . . . . . . . . . . . . . . . . .23

Heated Seats — If Equipped . . . . . . . .23

60/40 Split Folding Rear Seat —

 

Four Door Models . . . . . . . . . . . . . .

24

Front Passenger Easy Entry Seat —

Two Door Models . . . . . . . . . . . . . . .25

Tip ‘n Slide Seats —

Two Door Models . . . . . . . . . . . . . . .25

Removing The Rear Seat —

Two Door Models . . . . . . . . . . . . . . .26

HEAD RESTRAINTS . . . . . . . . . . .27

Front Head Restraints . . . . . . . . . . . .27

Rear Head Restraints —

Two Door Model . . . . . . . . . . . . . . . .28

Rear Head Restraints —

Four Door Model . . . . . . . . . . . . . . .28

STEERING WHEEL. . . . . . . . . . . .29

Tilt Steering Column . . . . . . . . . . . . .29

MIRRORS . . . . . . . . . . . . . . . . . .29

Heated Mirrors — If Equipped . . . . . . .29

EXTERIOR LIGHTS . . . . . . . . .

. .29

Headlights And Parking Lights . . . . .

. .29

Daytime Running Lights — If Equipped .30

High/Low Beam Switch . . . . . . . . .

. .30

Flash-To-Pass . . . . . . . . . . . . . . . .

.30

Automatic Headlights — If Equipped

. .30

Front Fog Lights . . . . . . . . . . . . . .

.30

Turn Signals . . . . . . . . . . . . . . . . .

.30

Lane Change Assist — If Equipped . . .

.31

Lights-On Reminder . . . . . . . . . . . .

.31

11

GETTING TO KNOW YOUR VEHICLE

WINDSHIELD WIPERS AND

 

POWER WINDOWS —

 

HOOD . . . . . . . . . . . . . . . . . . . .

.51

WASHERS . . . . . . . . . . . . . . . . .

.31

IF EQUIPPED . . . . . . . . . . . . . .

.38

Opening The Hood . . . . . . . . . . . . . .

51

Windshield Wiper Operation. . . . . . . . .

31

Wind Buffeting . . . . . . . . . . . . . . .

.39

Closing The Hood . . . . . . . . . . . . . . .

51

Rear Window Wiper/Washer —

 

REMOVABLE TOP

 

REAR SWING GATE

51

If Equipped

32

 

INFORMATION

39

 

 

CLIMATE CONTROLS

33

INTERNAL EQUIPMENT

52

Sunrider And Soft Top

39

Automatic Climate Control Overview

33

Power Outlets

52

Hard Top And Freedom Top

47

Automatic Temperature Control (ATC) —

 

Power Inverter — If Equipped

55

 

Dual Top — If Equipped

50

If Equipped

37

 

 

Wind Buffeting

51

 

 

Operating Tips

37

 

 

 

 

 

 

12

KEY FOB

Your vehicle uses a key start ignition system. The ignition system consists of a Remote Keyless Entry (RKE) key fob with an ignition switch.

Key Fob

The key fob allows you to lock or unlock the doors and liftgate from distances up to approximately 66 ft (20 m) using a handheld key fob. The key fob does not need to be pointed at the vehicle to activate the system.

NOTE:

In the ON/RUN position, the lock button is disabled. Only the unlock button is enabled.

Key Fob

1 — Unlock

2 — Remote Start — If Equipped

3 — Lock

To Unlock The Doors And Swing Gate

Push and release the key fob unlock button once to unlock the driver's door only, or twice to unlock all the doors and swing gate. When the key fob unlock button is pushed, the Illuminated Entry will initiate, and the turn signal lights will flash twice.

To Lock The Doors And Swing Gate

Push and release the lock button on the key fob to lock all doors. The turn signals will flash, and the horn will chirp once to acknowledge the lock signal.

General Information

The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this vehicle:

This device complies with Part 15 of the FCC Rules and with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions:

1.This device may not cause harmful interference.

13

GETTING TO KNOW YOUR VEHICLE

2.This device must accept any interference received, including interference that may cause undesired operation.

NOTE:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IGNITION SWITCH

Ignition Key Removal

1.Place the gear selector in PARK (if equipped with an automatic transmission).

2.Turn the ignition switch to the ACC (Accessory) position.

3.Push the key and cylinder inward and rotate the key to the LOCK position.

4.Remove the key from the ignition switch lock cylinder.

Ignition Switch

WARNING!

Before exiting a vehicle, always shift the automatic transmission into PARK or the manual transmission into FIRST gear or REVERSE, apply the parking brake, then turn the engine OFF, remove the key fob from the vehicle and lock your vehicle.

Never leave children alone in a vehicle, or with access to an unlocked vehicle.

WARNING!

Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector.

Do not leave the key fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle.

Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death.

CAUTION!

An unlocked vehicle is an invitation for thieves. Always remove key fob from the vehicle and lock all doors when leaving the vehicle unattended.

14

REMOTE STARTING SYSTEM — IF EQUIPPED

This system uses the key fob to start the engine conveniently from outside the vehicle while still maintaining security. The system has a range of approximately 300 ft (91 m).

NOTE:

The vehicle must be equipped with an automatic transmission to be equipped with Remote Start.

Obstructions between the vehicle and key fob may reduce this range.

How To Use Remote Start

All of the following conditions must be met before the engine will remote start:

Gear selector in PARK

Doors closed

Hood closed

Hazard switch off

Brake switch inactive (brake pedal not pushed)

Ignition key removed from ignition

Battery at an acceptable charge level

PANIC button not pushed

System not disabled from previous remote start event

Vehicle security alarm not active

WARNING!

Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monoxide (CO) which is odorless and colorless. Carbon Monoxide is poisonous and can cause serious injury or death when inhaled.

Keep key fobs away from children. Operation of the Remote Start System, windows, door locks or other controls could cause serious injury or death.

Remote Start Abort Message

The following messages will display in the instrument cluster display if the vehicle fails to remote start or exits remote start prematurely:

• Remote Start Aborted — Door Open

• Remote Start Aborted — Hood Open

• Remote Start Aborted — Fuel Low

• Remote Start Aborted — Swing Gate Open

• Remote Start Aborted — System Fault

The instrument cluster display message stays active until the ignition is turned to the ON/ RUN position.

To Enter Remote Start

Push and release the remote start button on the key fob twice within five seconds. The vehicle doors will lock, the parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the remote start mode for a 15-minute cycle.

15

GETTING TO KNOW YOUR VEHICLE

NOTE:

The park lamps will turn on and remain on during remote start mode.

For security, power window operation is disabled when the vehicle is in the remote start mode.

The engine can be started two consecutive times (two 15-minute cycles) with the key fob. However, the ignition switch must be cycled to the ON/RUN position before you can repeat the start sequence for a third cycle.

Remote start will also cancel if any of the following occur:

The engine stalls or RPM exceeds 2500.

Any engine warning lamps come on.

The hood is opened.

The hazard switch is pushed.

The transmission is moved out of PARK.

The brake pedal is pushed.

To Exit Remote Start Mode Without

Driving The Vehicle

Push and release the remote start button one time or allow the engine to run for the entire 15-minute cycle.

NOTE:

To avoid unintentional shut downs, the system will disable the one time push of the remote start button for two seconds after receiving a valid remote start request.

To Exit Remote Start Mode And Drive The

Vehicle

Before the end of the 15-minute cycle, push and release the unlock button on the key fob to unlock the doors and disarm the vehicle security alarm (if equipped). Then, insert the key into the ignition and place the ignition in the ON/RUN position.

NOTE:

The ignition must be placed in the ON/RUN position in order to drive the vehicle.

General Information

The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this vehicle:

This device complies with Part 15 of the FCC Rules and with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions:

1.This device may not cause harmful interference.

2.This device must accept any interference received, including interference that may cause undesired operation.

NOTE:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

16

SENTRY KEY

The Sentry Key Immobilizer System prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked.

The system uses key fobs that have an embedded electronic chip (transponder) to prevent unauthorized vehicle operation. Therefore, only key fobs that are programmed to the vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if someone uses an invalid key to try to start the engine.

NOTE:

A key fob that has not been programmed is also considered an invalid key, even if it is cut to fit the ignition or lock cylinder for that vehicle.

During normal operation, after placing the ignition in the on position, the vehicle security light will turn on for three seconds for a bulb check.

If the light remains on after the bulb check, it indicates that there is a problem with the electronics. In addition, if the vehicle security light begins to flash after the bulb check, it indicates that someone used an invalid key to try to start the engine. Either of these conditions will result in the engine being shut off after two seconds.

If the vehicle security light turns on during normal vehicle operation (vehicle running for longer than ten seconds), it indicates that there is a fault in the electronics. Should this occur, have the vehicle serviced as soon as possible by an authorized dealer.

CAUTION!

The Sentry Key Immobilizer system is not compatible with some aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection.

All of the key fobs provided with your new vehicle have been programmed to the vehicle electronics.

Replacement Key Fobs

NOTE:

Only key fobs that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a key fob is programmed to a vehicle, it cannot be programmed to any other vehicle.

CAUTION!

Always remove the Sentry Keys from the vehicle and lock all doors when leaving the vehicle unattended.

Duplication of key fobs may be performed at an authorized dealer or by following the customer key programming procedure. This procedure consists of programming a blank key fob to the vehicle electronics. A blank key fob is one that has never been programmed.

NOTE:

When having the Sentry Key Immobilizer System serviced, bring all vehicle key fobs with you to an authorized dealer.

17

GETTING TO KNOW YOUR VEHICLE

Customer Key Programming

If you have two valid key fobs, you can program new key fobs to the Sentry Key Immobilizer system by performing the following procedure:

1.Cut the additional key(s) to match the ignition and lock cylinder key code.

2.Insert the first valid key into the ignition. Place the ignition in the ON/RUN position for at least three seconds, but no longer than 15 seconds. Then, place the ignition in the LOCK position and remove the first key.

3.Insert the second valid key into the ignition. Place the ignition in the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound. In addition, the Vehicle Security Light will begin to flash. Place the ignition in the LOCK position and remove the second key.

4.Insert a blank key into the ignition. Place the ignition in the ON/RUN position within 60 seconds. After 10 seconds, a single chime will sound. In addition, the Vehicle Security Light will stop flashing. To indicate that programming is complete, the Vehicle Security Light will turn on again for three seconds and then turn off.

The new key is programmed. The key fob will also be programmed during this procedure.

Repeat this procedure to program up to eight keys. If you do not have a programmed key fob, contact your authorized dealer for details.

NOTE:

If a programmed key fob is lost, see your authorized dealer to have all remaining key fobs erased from the system's memory. This will prevent the lost key from starting your vehicle. The remaining key fobs must then be reprogrammed. All vehicle key fobs must be taken to an authorized dealer at the time of service to be reprogrammed.

General Information

The following regulatory statement applies to all radio frequency (RF) devices equipped in this vehicle:

This device complies with Part 15 of the FCC Rules and with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interference received, including interference that may cause undesired operation.

NOTE:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

18

VEHICLE SECURITY ALARM

— IF EQUIPPED

The vehicle security alarm monitors the vehicle doors, swing gate, and ignition for unauthorized operation. While the vehicle security alarm is armed, interior switches for door locks are disabled. The vehicle security alarm provides both audible and visible signals when alarming. The horn will sound, the headlights will turn on, the park lamps and/or turn signals will flash repeatedly for three minutes. If the disturbance is still present (driver's door, passenger door, other doors, ignition) after three minutes, the headlights, park lamps and/or turn signals will flash for an additional 15 minutes.

NOTE:

The Panic Alarm and the vehicle security alarm are quite different. Please take a moment to activate the Panic Alarm and the vehicle security alarm to hear the differences in the horn. In case one should go off in the future, you will need to know which mode has been activated in order to deactivate it.

Rearming The System

If something triggers the alarm, and no action is taken to disarm it, the vehicle security alarm will turn off the horn after three minutes, turn off all of the visual signals after 15 minutes, and then the vehicle security alarm will rearm itself.

To Arm The System

The vehicle security alarm will set when you use the Remote Keyless Entry key fob to lock the doors and swing gate, or when you use the power door lock switch while the door is open. After all the doors are locked and closed, the vehicle security light (located on the instrument cluster) will flash rapidly for about 16 seconds to signal that the vehicle security alarm is arming. During this 16-second arming period, opening any door or the swing gate will cancel the arming. If the vehicle security alarm is successfully set, the vehicle security light will flash at a slower rate to indicate the vehicle security alarm is armed.

To Disarm The System

To disarm the vehicle security alarm, you will need to push the unlock button on the key fob, or turn the ignition switch to the ON/ RUN position. If something has triggered the vehicle security alarm in your absence, the horn will sound three times, and the exterior lights blink three times when you unlock the doors. Check the vehicle for tampering.

The vehicle security alarm is designed to protect your vehicle; however, you can create conditions where the vehicle security alarm will arm unexpectedly. If you remain in the vehicle and lock the doors with the key fob, once the vehicle security alarm is armed (after 16 seconds), when you pull the door handle to exit, the alarm will sound. If this occurs, push the unlock button on the key fob to disarm the vehicle security alarm. You may also accidentally disarm the vehicle security alarm by unlocking the driver's door with the key and then locking it. The door will be locked but the vehicle security alarm will not arm.

19

GETTING TO KNOW YOUR VEHICLE

NOTE:

Unlocking the doors with the manual door lock plungers or the driver's door lock cylinder will not disarm the vehicle security alarm.

When the vehicle security alarm is armed, the interior power door lock switches will not unlock the doors.

DOORS

CAUTION!

Careless handling and storage of the removable door panels may damage the seals, causing water to leak into the vehicle’s interior.

Upper Half Door Window Removal —

If Equipped

Grasp the half door window and pull upward.

Upper Half Door Window Installation —

If Equipped

1.Grasp the half door window and line up the pins with the pockets in the lower door.

2.Push down to ensure the half door window is fully seated.

Front Door Removal

WARNING!

Do not drive your vehicle on public roads with the doors removed as you will lose the protection they can provide. This procedure is furnished for use during off-road operation only.

Door Removal Warning Label

NOTE:

Hinge pin can break if overtightened during door reinstall (Max Torque: 10 N·m / 7.5 ft· lb).

20

1.Roll down the glass window to prevent any damage.

2.Remove the hinge pin screws from the upper and lower outside hinges (using a #T50 Torx head driver).

NOTE:

The hinge pin screws and nuts can be stowed in the rear cargo tray located under the rear loadfloor.

Hinge Pin Screw

3.Unplug the wiring harness connector under the instrument panel by pushing the tab at the base of the connector and pulling down to disconnect.

Door Strap/Harness Location

4.Unhook the door strap from the body hook. Be careful not to allow the door to swing fully open as the mirror may damage the paint.

5.With the door open, lift the door to clear the hinge pins from their hinges and remove the door.

NOTE:

Doors are heavy; use caution when removing them.

To reinstall the door(s), perform the previous steps in the opposite order.

Rear Door Removal (Four-Door Models)

WARNING!

Do not drive your vehicle on public roads with the doors removed as you will lose the protection they can provide. This procedure is furnished for use during off-road operation only.

Door Removal Warning Label

NOTE:

Hinge pin can break if overtightened during door reinstall (Max Torque: 10 N·m / 7.5 ft· lb).

21

GETTING TO KNOW YOUR VEHICLE

1.Roll down the glass window to prevent any damage.

2.Remove the hinge pin screws from the upper and lower outside hinges (using a #T50 Torx head driver).

NOTE:

The hinge pin screws and nuts can be stowed in the rear cargo tray located under the rear load floor.

Hinge Pin Screw

3.Slide the front seat(s) fully forward.

4.Remove the trim access door from the bottom of the B-pillar.

Trim Access Door

5.Unplug the wiring harness connector.

NOTE:

Squeeze the tab on the base of the connector. This will unlock the connector tab, allowing the harness to be disconnected.

Connector Unplugged

6.Unhook the door strap from the body hook.

7.With the door open, lift the door to clear the hinge pins from their hinges and remove the door.

NOTE:

Doors are heavy; use caution when removing them.

To reinstall the door(s), perform the previous steps in the opposite order.

22

SEATS

Seats are a part of the Occupant Restraint System of the vehicle.

WARNING!

It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.

Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed.

Be sure everyone in your vehicle is in a seat and using a seat belt properly.

Heated Seats — If Equipped

On some models, the front driver and passenger seats may be equipped with heaters in both the seat cushions and seatbacks.

There are two heated seat switches that allow the driver and passenger to operate the seats independently. The controls for each seat are located on a switch bank near the bottom center of the instrument panel.

Front Heated Seat Switches

You can choose from HI, LO or OFF heat settings. Amber indicator lights in each switch indicate the level of heat in use. Two indicator lights will illuminate for HI, one for LO and none for OFF.

Push the switch once to select HI-level heating. Push the switch a second time to select LO-level heating. Push the switch a third time to shut the heating elements OFF.

When the HI-level setting is selected, the heater will provide a boosted heat level during the initial stages of operation. Then, the heat output will drop to the normal HI-level. If the HI-level setting is selected, the system will automatically switch to LO-level after approximately 30 minutes of continuous operation. At that time, the number of illuminated LEDs changes from two to one, indicating the change. The LO-level setting will turn OFF automatically after approximately 30 minutes.

NOTE:

When a heat setting is selected, heat will be felt within two to five minutes.

23

GETTING TO KNOW YOUR VEHICLE

WARNING!

Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time.

Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat.

60/40 Split Folding Rear Seat —

Four Door Models

To provide additional storage area, each rear seat can be folded flat to allow for extended cargo space.

NOTE:

Prior to folding the rear seat, it may be necessary to reposition the front seat to its mid-track position.

Be sure that the front seats are fully upright and positioned forward. This will allow the rear seat to fold down easily.

WARNING!

It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.

Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.

Be sure everyone in your vehicle is in a seat and using a seat belt properly.

To Fold Down The Rear Seat

Locate the release lever (upper outboard side of seat), and lift it upward until the seatback releases.

Slowly fold down the seatback.

NOTE:

You may experience deformation in the seat cushion from the seat belt buckles if the seats are left folded for an extended period of time. This is normal. By simply opening the seats to the open position, the seat cushion will return to its normal shape over time.

To Raise The Rear Seat

Raise the seatback and lock it into place. If interference from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position.

NOTE:

If the rear seatback is not fully latched, the center shoulder belt will not be able to be extended for use. If you cannot extend the center shoulder belt, make sure your seatback is fully latched.

24

WARNING!

Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.

Front Passenger Easy Entry Seat — Two

Door Models

Pull upward on the recline lever (toward the rear of the vehicle) and slide the entire seat forward.

Easy Entry Lever

To return the seat to a sitting position, rotate the seatback upright until it locks and push the seat rearward until the track locks.

NOTE:

The front passenger seats have a track memory, which returns the seat to just past the halfway point of the track regardless of its original position.

• The recliner and easy entry levers should not be used during the automatic returning of the seat to its sitting position.

Tip ‘n Slide Seats — Two Door Models

This feature allows the front seats to be rotated toward the instrument panel to allow easier entry into the rear seats.

Driver's Seat

Pull upward on the recline lever and bring the seatback to its full forward position.

Rotate the entire seat assembly toward the instrument panel.

Passenger Seat

In addition to Easy Entry, the front passenger seat is also equipped with Tip ‘n Slide. This feature allows for easier entry for rear passengers.

Pull upward on the recline lever and slide the entire seat forward (Easy Entry).

With the seat forward, pull the entire seat assembly toward the instrument panel.

25

GETTING TO KNOW YOUR VEHICLE

Removing The Rear Seat —

Two Door Models

NOTE:

Prior to folding the rear seat, it may be necessary to reposition the front seats.

Be sure that the front seats are fully upright and positioned forward. This will allow the rear seat to fold down easily.

1.Lift the seatback release lever and fold the seatback forward.

Seatback Release Lever

2. Slowly flip the entire seat forward.

WARNING!

Do not drive the vehicle with the seat in the forward tumble position. The seat must be latched to all floor attachments when the vehicle is in motion.

3.Push down on the release bar on each side, and pull the seat out and away from the lower bracket.

4.Remove the seat from the vehicle.

WARNING!

It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.

Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.

Be sure everyone in your vehicle is in a seat and using a seat belt properly.

WARNING!

In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure that the seats are fully latched.

Replacing The Rear Seat —

Two Door Models

Reverse the steps for removing the seat.

WARNING!

To help protect against personal injury, passengers should not be seated in the rear cargo area with the rear seat folded down or removed from the vehicle.

The rear cargo space is intended for load carrying purposes only, not for passengers who should sit in seats and use seat belts.

26

HEAD RESTRAINTS

Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear.

WARNING!

All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a crash.

Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.

Front Head Restraints

To raise the head restraint, pull upward on the head restraint. To lower the head restraint, push the adjustment button located on the base of the head restraint, and push downward on the head restraint.

To remove the head restraint, raise it as far as it can go then push the adjustment button and the release button at the base of each post while pulling the head restraint up. To reinstall the head restraint, put the head restraint posts into the holes and push downward. Then adjust it to the appropriate height.

Front Head Restraint

1 — Release Button

2 — Adjustment Button

WARNING!

A loose head restraint thrown forward in a collision or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow removed

27

GETTING TO KNOW YOUR VEHICLE

WARNING!

head restraints in a location outside the occupant compartment.

ALL the head restraints MUST be reinstalled in the vehicle to properly protect the occupants. Follow the re-installation instructions above prior to operating the vehicle or occupying a seat.

NOTE:

Do not reposition the head restraint 180 degrees to the incorrect position in an attempt to gain additional clearance to the back of the head.

Rear Head Restraints — Two Door Model

The rear seat head restraints are not adjustable. They can be removed to make it easier to take out the rear seat. To remove the head restraint, push the button on each of the two head restraint guides and pull upward on the head restraint. Replace the head restraint before driving the vehicle with passengers in the rear seat. To replace the head restraint, insert the head restraint rods into the guides and push downward on the head restraint until locked.

Rear Head Restraint

WARNING!

Do not drive the vehicle without the rear seat head restraints installed while passengers are occupying the rear seat. In a collision, people riding in this area without the head restraints installed are more likely to be seriously injured or killed.

WARNING!

A loose head restraint thrown forward in a collision or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow removed head restraints in a location outside the occupant compartment.

ALL the head restraints MUST be reinstalled in the vehicle to properly protect the occupants. Follow the reinstallation instructions above prior to operating the vehicle or occupying a seat.

NOTE:

Do not reposition the head restraint 180 degrees to the incorrect position in an attempt to gain additional clearance to the back of the head.

Rear Head Restraints — Four Door Model

The rear seat is equipped with nonadjustable head restraints.

28

Loading...
+ 238 hidden pages