Jeep Renegade 2014 Owner's Manual

0 (0)

OWNER HANDBOOK

This Owner Handbook is intended to show the vehicle's operating conditions.

For the enthusiast user who wants to have insights, curiosities and detailed information about the characteristics and functions of the vehicle, Jeep gives the opportunity to consult a dedicated section which is available in electronic format.

ONLINE VEHICLE OWNER HANDBOOK

The following symbol is reported within the text of the Owner Handbook, next to the subjects for which details are provided.

Go to the www.mopar.eu/owner website and access your personal area.

The “Maintenance and care” page includes all the information about your vehicle and the link to access eLUM, where you will find all the details of the Owner Handbook.

The eLUM website is free and will allow you, among many other things, to easily consult the on-board documents of all the other vehicles of the Group.

Have a nice reading and happy motoring!

Dear Customer,

We would like to congratulate and thank you for choosing a Jeep.

We have written this handbook to help you get to know all the features of your vehicle and use it in the best possible way. This vehicle is intended for daily use as well as for specific uses, so even routes and uses not suitable for traditional vehicles on the market can be tackled. Ride and handling capabilities are different from most other vehicles, both on and off road; we thus recommend you to spend all the time necessary to know the vehicle dynamics.

Here you will find information, advice and important warnings regarding use of your vehicle and how to achieve the best performance from the technical features of your Jeep.

You are advised to read it right through before taking to the road for the first time, to become familiar with the controls and above all with those concerning brakes, steering and gearbox; at the same time, you can understand the vehicle behaviour on different road surfaces.

This document also provides a description of special features and tips, as well as essential information for the safe driving, care and maintenance of your Jeep over time.

After reading it, you are advised to keep the handbook inside the vehicle, for an easy reference and for making sure it remains onboard the vehicle should it be sold.

In the attached Warranty Booklet you will also find a description of the Services that Jeep offers to its customers, the Warranty Certificate and the detail of the terms and conditions for maintaining its validity.

We are sure that these will help you to get in touch with and appreciate your new vehicle and the service provided by the people at Jeep.

Enjoy reading. Happy motoring!

WARNING

This Owner Handbook describes all Jeep Renegade versions. Options, equipment dedicated to specific Markets or versions are not explicitly indicated in the text: as a consequence, you should only consider the information which is related to the trim level, engine and version that you have purchased. Any content introduced throughout the production of the model, outside the specific request of options at the time of purchase, will be identified with the wording (where provided).

All data contained in this publication are intended to help you use your vehicle in the best possible way. Chrysler Group LLC effort aims at a constant improvement of the vehicles produced. For this reason it reserves the right to make changes at the model described for technical and/or commercial reasons.

For further information, contact a Jeep Dealership.

READ THIS CAREFULLY

REFUELLING

Petrol engines: only refuel with unleaded petrol with octane rating (RON) not less than 95 in compliance with the European specification EN228. Do not use petrol containing methanol or ethanol E85. Using these mixtures may cause misfiring and driving issues, as well as damage fundamental components of the supply system.

Diesel engines: refuel only with diesel fuel conforming to the European specification EN590. The use of other products or mixtures may damage the engine beyond repair and consequently invalidate the warranty, due to the damage caused.

For further details on the use of the correct fuel see paragraph "Refuelling the vehicle" in the "Starting and driving" chapter.

STARTING THE ENGINE

Versions with manual gearbox (petrol engines): make sure that the parking brake is engaged; set the gear lever to neutral, fully depress the clutch pedal without pressing the accelerator, then bring the ignition device to AVV or press the ignition device button and release the key or the button as soon as the engine has started.

Versions with manual gearbox (diesel engines): make sure that the parking brake is engaged; set the gear lever to neutral, fully depress the clutch pedal without pressing the accelerator, then bring the ignition device to MAR and wait for warning lights and to switch off. Bring the ignition device to AVV or press the ignition device button and finally release the key or the button as soon as the engine has started.

Versions with automatic transmission: make sure that the parking brake is engaged and that the gear lever is in P (Park) or N (Neutral), fully depress the brake pedal, then bring the ignition device to AVV or press the ignition device button.

PARKING ON FLAMMABLE MATERIAL

The catalytic converter develops high temperatures during operation. Do not park the vehicle on grass, dry leaves, pine needles or other flammable material: fire hazard.

RESPECTING THE ENVIRONMENT

The vehicle is fitted with a system that carries out a continuous diagnosis of the emission-related components in order to help protect the environment.

ELECTRICAL ACCESSORIES

If, after buying the vehicle, you decide to add electrical accessories (with the risk of gradually draining the battery), contact a Jeep Dealership. They can calculate the overall electrical requirement and check that the vehicle's electric system can support the required load.

SCHEDULED SERVICING

Correct maintenance of the vehicle is essential for ensuring that it maintains its performance and its safety features, its environmental friendliness and low running costs unchanged in time.

SYMBOLS

Some vehicle components have coloured labels whose symbols indicate precautions to be observed when using this component.

A plate summarising these symbols can also be found under the bonnet.

ROLL OVER WARNING

The risk of rolling over for off-road vehicles is remarkably higher than for any other type of vehicle. This vehicle has a higher ground clearance and has a higher centre of gravity compared to many other vehicles for transporting passengers, so that it allows a better performance to be reached in a wide range of off-road applications.

Anyway, a dangerous driving style can increase the risk of losing control of the vehicle.

The vehicle is more subject to the risk of rolling over because of the higher centre of gravity should the driver lose its control. Therefore, avoid tight curves or other unsafe driving conditions that may lead to losing the vehicle control. Failure to comply with these precautions may cause accidents, vehicle rolling over and severe or fatal injuries. Drive carefully.

The main cause for severe or fatal injuries is failing to wear driver and passenger seat belts. In the event of rolling over, a passenger not wearing the seat belt is much more likely to be fatally injured than a passenger wearing it correctly. Always fasten the seat belts.

VEHICLE CHANGES/ALTERATIONS

IMPORTANT Any change or alteration of the vehicle might seriously affect its safety and road holding, thus causing accidents, in which the occupants could even be fatally injured.

USE OF THE OWNER HANDBOOK

OPERATING INSTRUCTIONS

Each time direction instructions (left/right or forwards/backwards) about the vehicle are given, these must be intended as regarding an occupant in the driver's seat. Special cases not complying with this rule will be properly specified in the text. The figures in the Owner Handbook are provided by way of example only: this might imply that some details of the image do not correspond to the actual arrangement of your vehicle. In addition, the Handbook has been conceived considering vehicles with steering wheel on the left side; it is therefore possible that on vehicles with steering wheel on the right side, some controls position or construction is not exactly mirror-like with respect to the figure.

To identify the chapter with the information needed you can consult the index at the end of this Owner Handbook.

Chapters can be rapidly identified with dedicated graphic tabs, at the side of each odd page. A few pages further there is a key for getting to know the chapter order and the relevant symbols in the tabs. There is anyway a textual indication of the current chapter at the side of each even page.

WARNINGS AND PRECAUTIONS

While reading this Owner Handbook you will find a series of WARNINGS to prevent procedures that could damage your vehicle.

There are also PRECAUTIONS that must be carefully followed to prevent incorrect use of the components of the vehicle, which could cause accidents or injuries.

Therefore all WARNINGS and PRECAUTIONS must always be carefully followed. WARNINGS and PRECAUTIONS are recalled in the text with the following symbols:

personal safety;

vehicle safety;

environmental protection.

NOTE These symbols, when necessary, are indicated besides the title or at the end of the line and are followed by a number. That number recalls the corresponding warning at the end of the relevant section.

Jeep Renegade 2014 Owner's Manual

GETTING TO KNOW YOUR CAR

GETTING TO KNOW YOUR CAR

In-depth knowledge of your new vehicle starts here.

The booklet that you are reading simply and directly explains how it is made and how it works.

That’s why we advise you to read it seated comfortably on board, so that you can see immediately what is described here for yourself.

THE KEYS.......................................

7

IGNITION DEVICE ...........................

8

SENTRY KEY® ...............................

10

ALARM ...........................................

11

DOORS...........................................

11

SEATS ............................................

14

HEAD RESTRAINTS........................

16

STEERING WHEEL .........................

17

REAR VIEW MIRRORS....................

18

EXTERIOR LIGHTS .........................

19

INTERIOR LIGHTS ..........................

21

WINDSCREEN/REAR WINDOW

 

WIPER ............................................

22

CLIMATE CONTROL ......................

24

ELECTRIC WINDOWS ....................

28

ELECTRIC SUN ROOF....................

29

MYSKY SUN ROOF ........................

31

BONNET.........................................

33

LUGGAGE COMPARTMENT...........

34

6

THE KEYS

KEY WITH REMOTE CONTROL

1) 1) 1)

Metal insert A fig. 1 of the key operates:

the ignition device;

the door lock.

 

 

1

J0A0181C

Press button B to open/close the metal insert.

ELECTRONIC KEY

(versions with "Keyless Enter-N-Go" system)

On versions equipped with "Keyless Enter-N-Go" system, the vehicle features an electronic keyfig. 2, of which two copies are provided.

2

J0A0315C

Briefly press button : unlocking of doors and luggage compartment, timed switching-on of internal lights and double flashing of direction indicators (where provided).

Briefly press button : lock of doors and luggage compartment with roof lights off and single flash of direction indicators (where provided).

Press button : remote opening of the luggage compartment (to open the luggage compartment press the button twice in quick succession).

Press button : remote switching on of the main beam headlights, for a maximum of 90 seconds.

Pressing button again or at the end of the 90 seconds, the lights switched on previously will go off (if the parking light function was already active it will remain so). If, when 90 seconds have passed, button is pressed, the main beam headlights and the side lights will stay on for further

30 seconds.

REQUEST FOR

ADDITIONAL KEYS

Should a new key with remote control or a new electronic key be necessary, go to a Jeep Dealership, taking an

ID document and the vehicle ownership documents.

WARNING

1) Press button B only with the key away from your body, especially your eyes and from objects which could get damaged (e.g. your clothes). Do not leave the key unattended, to prevent people, especially children, from inadvertently pressing the button.

7

GETTING TO KNOW YOUR CAR

8

WARNING

1) The electronic components inside the key may be damaged if the key is subjected to strong shocks. In order to ensure complete efficiency of the electronic devices inside the key, it should never be exposed to direct sunlight.

WARNING

1) Remote control used batteries may be harmful to the environment if not disposed of correctly. They must be disposed of

as specified by law in the special containers or taken to a Jeep Dealership, which will take care of their disposal.

IGNITION DEVICE

2) 3) 6) 7)

VERSIONS WITH

MECHANICAL KEY

The key can be turned to three different positions fig. 3:

STOP: engine off, key can be removed, steering column locked (with key removed). Some electrical devices (e.g. central door locking system, alarm, etc.) are still available;

MAR: driving position. All electrical devices are available;

AVV: engine start-up.

3

J0A0021C

NOTE On versions with automatic transmission the ignition key can only be removed when the gear lever is at P (Park).

VERSIONS WITH

ELECTRONIC KEY

(Keyless Enter-N-Go system)

To activate the ignition device the electronic key must be inside the passenger compartment. The ignition device fig. 4 activates also if the electronic key is inside the luggage compartment or on the parcel shelf.

4

J0A0022C

The ignition device can enter the following states:

STOP: engine off, steering column locked. Some electrical devices (e.g. central door locking system, alarm, etc.) are still available;

MAR: driving position. All electrical devices are available. This state can be entered by pressing the ignition device button once, without pressing the brake pedal (versions with automatic transmission) or the clutch pedal (versions with manual gearbox);

AVV: engine start-up.

Starting the engine (with electronic key battery run down): rest the rounded edge of the electronic key (the side opposite the metal insert) on the button of the ignition device and press this button through the electronic key.

Switching off the engine (with electronic key battery run down): hold down the button of the ignition device or press it three times in a row within a few seconds.

NOTE The ignition device does NOT activate if the electronic key is inside the luggage compartment and this is open.

NOTE With the ignition device at MAR, if 30 minutes pass with the vehicle stationary (versions with manual gearbox) or with the gear lever at P (Park) (versions with automatic transmission) and the engine off, the ignition device will automatically move to the STOP position.

For more information on the engine start-up, see the description in the "Starting the engine" paragraph, in the "Starting and driving" chapter.

STEERING LOCK

Engagement

Versions with mechanical key: with the device at STOP, remove the key and turn the steering wheel until it locks. IMPORTANT If the ignition key has been moved from the MAR to the STOP position, the steering lock cannot engage until the key is removed from the ignition device.

Versions with electronic key: the steering lock engages when the driver door is opened, with the ignition device button at STOP and speed below 3 km/h.

Disengagement

Versions with mechanical key: slightly moving the steering wheel, turn the key to the MAR position.

Versions with electronic key: the steering lock disengages when the ignition device is pressed and the electronic key is recognised.

4) 5)

WARNING

2)If the ignition device has been tampered with (e.g. an attempted theft), have it checked over by a Jeep Dealership before driving again.

3)Always take the key with you when you leave your vehicle to prevent someone from accidentally operating the controls. Remember to engage the electric parking brake. Never leave children unattended in the vehicle.

4)It is absolutely forbidden to carry out any after-market operation involving steering system or steering column modifications (e.g. installation of anti-theft device) that could adversely affect performance and safety, invalidate the warranty and also result in the vehicle not meeting typeapproval requirements.

5)Never extract the mechanical key while the vehicle is moving. The steering wheel will automatically lock as soon as it is turned. This also applies to cases in which the vehicle is towed.

6)ALWAYS engage the parking brake before leaving the vehicle. On versions equipped with automatic transmission, move the gear lever to STOP (Park) and press the ignition device to set it to STOP. When leaving the vehicle, always lock all the doors by pressing the dedicated button on the handle.

9

GETTING TO KNOW YOUR CAR

7) On versions equipped with Keyless Enter-N-Go system, do not leave the electronic key inside or near the vehicle or in a place accessible to children. Do not leave the vehicle with the ignition device in the MAR position. A child could operate the electric windows, other controls or even start the vehicle.

SENTRY KEY®

The Sentry Key® system, prevents unauthorised use of the vehicle, disabling engine starting.

The system does not need to be enabled/activated: operation is automatic, regardless of the fact that the vehicle's doors are locked or unlocked.

When the ignition device is taken to MAR, the Sentry Key® system identifies the code transmitted by the key. If the code is recognised as valid, the Sentry Key® system enables engine starting.

When the ignition device is brought back to STOP, the Sentry Key® system deactivates the control unit controlling the engine, thus preventing its starting.

For the correct engine starting procedures, see the instructions in the "Starting the engine" paragraph, "Starting and driving" chapter.

IRREGULAR OPERATION

If, during starting, the key code is not correctly recognised, the icon is displayed on the instrument panel (see the instructions in the "Warning lights and messages" paragraph, "Knowing the instrument panel" chapter). This condition leads to the engine switching off after 2 seconds. In this case, bring the ignition device to STOP and then to MAR; if it is still blocked, try with the other keys provided. If it is still not possible to start the engine, contact a Jeep Dealership.

If the icon is displayed while driving, this means that the system is running

a self-diagnosis (e.g. due to a voltage drop). If the displaying is still on, contact a Jeep Dealership.

10

ALARM

Activation of the alarm triggers the acoustic warning and the direction indicators.

IMPORTANT The alarm is adapted to meet requirements in various countries.

SWITCHING ON THE ALARM

With the doors, bonnet and tailgate closed and the ignition device turned to STOP, point the key with remote control (or electronic key) towards the vehicle and press and release button . Except for specific markets, the system emits a visual and acoustic signal and enables door locking.

With the alarm on, warning light A fig. 5 flashes on the instrument panel.

 

 

5

J0A0191C

TURNING THE ALARM OFF

Press the button.

IMPORTANT The alarm does not switch off when the central opening is activated using the metal insert in the key.

DISABLING THE ALARM

To completely deactivate the alarm (e.g. during a long period of vehicle inactivity), close the doors by turning the metal insert of the key with remote control in the door lock.

IMPORTANT If the batteries of the key with the remote control run out or

the system fails, the alarm can

be switched off by placing the ignition device to MAR. On versions equipped with Keyless Enter-N-Go system, manually open the doors by placing the metal insert that is in the key in the driver side door pawl and then place the same electronic key on the ignition device.

DOORS

LOCKING/UNLOCKING

DOORS FROM THE

INSIDE

8)

If all doors are closed properly, they will automatically be locked once the vehicle has exceeded 20 km/h ("Autoclose" function).

Central locking/unlocking: press the button on the driver side door panel trim fig. 6 or on the passenger side door to lock the doors. With doors locked, press button to unlock them.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

J0A0079C

 

 

 

Manual locking/unlocking: use lever A fig. 7 on the front door handle. Position 1: door unlocked

Position 2 : door locked

11

GETTING TO KNOW YOUR CAR

7

J0A0027C

LOCKING/UNLOCKING DOORS FROM THE OUTSIDE

2)

Door locking from outside: with the doors closed, press the button on the key or fit and then turn the metal insert (located inside the key) in the driver side door lock.

Door unlocking from outside: with the doors closed, press the button on the key or fit and then turn the metal insert (located inside the key) in the driver side door lock.

PASSIVE ENTRY

3)

The Passive Entry system can identify the presence of an electronic key near the doors and the tailgate. Thanks to it, you can unlock/lock the doors (or the tailgate) without having to press any button on the electronic key.

If the system identifies that the electronic key found is valid, the owner of the key can simply grasp one of

the front handles to release the alarm and unlock the door and tailgate opening mechanism.

After the unlocking, pulling the opening handle all doors can be opened depending on the mode set through the display menu or the Uconnect system. You can also access the luggage compartment by pressing the dedicated opening button A fig. 8. NOTE Ensure that you always have the electronic key with you (e.g. in your pocket) so that the system recognises it and lets you enter the passenger compartment and start the engine.

8

J0A0042C

Driver side door emergency opening

If the electronic key does not work (e.g. because its battery does not work anymore, or the vehicle battery is flat), the emergency metal inside the key can be used to operate the lock unlocking on the driver side door.

Removing the metal insert: operate on A device fig. 9 and extract, pulling towards outside, the metal insert B.

Then fit the metal insert in the driver side door lock and rotate it to release the door lock.

Door locking: make sure that you have the electronic key and are within the 1.5-metre operating range of the driver or passenger side door handle. Press button A fig. 10 on the handle: this will lock all doors and the tailgate. Door locking will activate the alarm as well (where provided).

12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

J0A0038C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

J0A0040C

IMPORTANT After pressing the "door locking" button, wait two seconds before the doors can be unlocked again using the door handle. It is therefore possible to check whether the vehicle is locked correctly by pulling the door handle within 2 seconds. The doors will not be unlocked.

Tailgate door lock locking: with tailgate closed press button A fig. 11.

11

J0A0023C

DEAD LOCK

(where provided)

9)

This inhibits the operation of the interior door handles and the door locking/ unlocking button.

Activating the device: the device is enabled on all the doors by quickly double-pressing the button on the key.

Deactivating the device: press button on the key with remote control or

place the ignition device to MAR.

CHILD SAFETY DEVICE

10)

This system prevents the rear doors from being opened from the inside. The device A fig. 12 can only be engaged with the doors open:

position : device engaged (door locked);

position : device not engaged (door may be opened from the inside).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

 

 

 

J0A0041C

 

The device remains engaged even if the doors are electrically unlocked.

IMPORTANT The rear doors cannot be opened from the inside when the child lock device is engaged.

13

GETTING TO KNOW YOUR CAR

WARNING

8)NEVER leave children unattended inside the vehicle, let alone leave the vehicle with the doors unlocked in a place that children can access easily. Children may seriously, or even fatally, injure themselves. Also ensure that children do not inadvertently operate the electric parking brake, the brake pedal or the automatic transmission lever.

9)Always use this device when carrying children. After engaging the device on both rear doors, check for proper engagement by trying to open a rear door with the internal handle.

10)Once the Dead Lock device has been actuated, doors cannot be opened from inside; for this reason, make sure there are no persons left inside the vehicle.

WARNING

2) Make sure to take the key with you once a door or the tailgate is locked, to prevent locking the same key inside the vehicle. Once it has been left inside, the key can be collected only using the second key supplied with the vehicle.

3) The operation of the recognition system depends on various factors, such as, for example, any electromagnetic wave interference from external sources (e.g. mobile phones), the charge of the battery in the electronic key and the presence

of metal objects near the key or the vehicle. In these cases it is still possible to unlock the doors by using the metal insert in

the electronic key (see description on the following pages).

SEATS

FRONT SEATS WITH MANUAL ADJUSTMENT

11) 4)

Longitudinal adjustment: lift the lever A fig. 13 and push the seat fully forward or backward.

13

J0A0043C

12)

IMPORTANT Carry out the adjustment while sitting on the seat involved (driver side or passenger side).

Height adjustment: move lever B fig. 13 upwards or downwards to achieve the required height.

Backrest angle adjustment: move lever C fig. 13 to adjust the backrest angle, accompanying it with the movement of the torso (operate the lever until the desired position is reached, then release it).

14

Electric lumbar adjustment: when the ignition device is at MAR, press button A fig. 14 to adjust the lumbar area support, until getting the maximum comfort while driving.

14

J0A0399C

ELECTRICALLY ADJUSTED FRONT SEATS

5)

The control buttons (on the outside of the seat) can be used to adjust the height, the lengthwise position in relation to the vehicle and the angle of the backrest.

Height adjustment: use the front or rear part of the switch A fig. 15 to modify the height and/or the angle of the seat cushion.

Longitudinal adjustment: press switch A forwards or backwards to move the seat in the corresponding direction.

15

J0A0044C

Backrest angle adjustment: press switch B forwards or backwards to adjust the backrest angle.

Electric lumbar adjustment: use the joystick C to actuate the lumbar area device until getting top comfort while driving.

FRONT SEAT ELECTRIC HEATING

With ignition device at MAR, press the fig. 16 buttons.

16

J0A0047C

Two heating levels can be selected: "minimum heating" (one orange LED lit on the buttons) / "maximum heating" (two orange LEDs lit on the buttons). After selecting one heating level, you need to wait for a few minutes until warm air flows into the compartment.

IMPORTANT To preserve the battery charge, this function cannot be activated when the engine is off.

REAR SEATS

Partial extension of the luggage compartment (1/3 or 2/3)

6)

Proceed as follows:

remove the parcel shelf, if present;

completely lower the rear seat head restraints;

move the seat belt to the side, making sure that it is fully extended and not twisted;

actuate lever A fig. 17 to tilt the left or right part of the backrest: it will automatically tilt forward. If necessary, accompany the backrest during the initial stage of tilting. When you lift the lever, you will see a red mark.

15

GETTING TO KNOW YOUR CAR

16

17

J0A0045C

Repositioning the backrests

Move the seat belts to the side, making sure that they are correctly extended and not twisted.

Lift up the backrests and push them back until a click is heard for both hooking mechanisms, at the side. Make sure that "red marks" on levers A fig. 17 are not visible any more. The "red mark" means that the backrest was not hooked properly.

13)

WARNING

11)Any adjustment must be performed with the vehicle at a standstill.

12)After releasing the adjustment lever, always check that the seat is locked on the guides by trying to move it back and forth. If the seat is not locked into place, it may unexpectedly slide and cause the driver to lose control of the vehicle.

13) Make sure that the backrests are correctly secured on both sides ("red marks" not visible) to prevent it from moving forward in the event of sharp braking, causing injuries to occupants.

WARNING

4)The fabric upholstery for the seats has been designed to withstand long-term wear deriving from normal use of the vehicle. Nevertheless, some precautions are required. Avoid prolonged and/or excessive rubbing involving clothing accessories such as metal buckles, bosses, Velcro strips and the like, which, by applying a high pressure on the fabric in a limited area, could cause it to break, thereby damaging the upholstery.

5)Do not arrange objects beneath the electrically adjustable seat and do not impede its movement, since the controls may be damaged. They may also restrict the seat travel.

6)Before tilting the backrest, remove any objects laying on the seat.

HEAD RESTRAINTS

ADJUSTMENTS

14)

Upwards adjustment: raise the head restraint until it clicks into place.

Downwards adjustment: press button A fig. 18 and fig. 19 and lower the head restraint.

18

 

 

 

 

 

J0A0057C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19

J0A0058C

REAR HEAD RESTRAINTS (removal)

Proceed as follows to remove the head restraints:

raise the head restraints to their maximum height;

press buttons A and B fig. 19 at the side of the two supports, then remove the head restraints by pulling them upwards.

WARNING

14) The head restraints must be adjusted so that the head, rather than the neck, rests on them. Only in this case can they protect your head correctly.

STEERING WHEEL

15) 16)

ADJUSTMENTS

The steering wheel can be adjusted both in height and in depth.

To adjust, move lever A fig. 20 downwards to position 1, then adjust the steering wheel to the most suitable position and lock it in position by moving lever A to position 2.

20

J0A0056C

ELECTRIC STEERING WHEEL HEATING

With ignition device at MAR, press button on the dashboard fig. 21. When the function is enabled, the LED on the button switches on.

IMPORTANT If this function is activated with engine off the battery may run down.

 

 

 

 

 

 

 

 

21

J0A0048C

 

WARNING

15)Any adjustment of the steering wheel position must be carried out only with the vehicle stationary and the engine turned off.

16)It is absolutely forbidden to carry out any after-market operations involving steering system or steering column modifications (e.g. installation of anti-theft device) that could adversely affect performance and safety, invalidate the warranty and also result in the vehicle not meeting type-approval requirements.

17

GETTING TO KNOW YOUR CAR

REAR VIEW

MIRRORS

INTERIOR MIRROR

The mirror is fitted with a safety device that causes its release in the event of a violent impact with the passenger. Operate lever A fig. 22 to adjust the mirror into two different positions: normal or anti-glare.

22

J0A0060C

ELECTROCHROMIC INTERIOR MIRROR

On some versions, an electrochromic mirror is available, that can automatically modify its reflecting action to prevent dazzling the driver fig. 23 The electrochromic mirror has an ON/OFF button to activate/deactivate the electrochromic anti-glaring function.

23

J0A0059C

DOOR MIRRORS

Electric adjustment

17)

The mirrors can only be adjusted with the ignition device at MAR.

Select the desired mirror using device A fig. 24:

device in position 1: left mirror selected;

device in position 2: right mirror selected.

24

J0A0061C

To adjust the selected mirror, press button B fig. 24 in the four directions shown by the arrows.

IMPORTANT Once adjustment is complete, rotate device A fig. 24 to position 0 to prevent accidental movements.

Electrical mirror folding

To fold the mirrors, press button C fig. 24. Press the button again to restore the mirrors to the driving position. WARNING The mirrors must always be open while driving and should never be folded.

WARNING

17) As the driver's door mirror is curved, it may slightly alter the perception of distance.

18

EXTERIOR LIGHTS

LIGHT SWITCH

Light switch A fig. 25, located on the left side of the dashboard, controls operation of headlights, side lights, daytime running lights, dipped beam headlights, fog lights, rear fog lights and instrument panel indicator and control button graphic lighting regulation.

25

J0A0062C

The exterior lights can only be switched on when the ignition device is at MAR. The instrument panel and the various controls on the dashboard will be lit up when the exterior lights are switched on.

AUTO FUNCTION

(Dusk sensor)

(where provided)

This is an infrared LED sensor that works in conjunction with the rain sensor and is located on the windscreen. It is able to detect variations in outside lighting based on the light sensitivity and adjusts the display Menu or the Uconnect™ system.

The higher the sensitivity, the lower the amount of external light needed to switch the lights on.

Function activation: turn the light switch to AUTO.

Function deactivation: turn the light switch to a position other than AUTO.

IMPORTANT This function can only be activated with the ignition device at MAR.

DIPPED BEAM

HEADLIGHTS

Turn the ignition switch to to switch on the side lights, the instrument panel lights and the dipped beam headlights. The warning light switches on in the instrument panel.

DAYTIME RUNNING LIGHTS (DRL)

"Daytime Running Lights"

(where provided)

18) 19)

With the ignition device turned to MAR and the light switch turned to position O the daytime running lights are automatically activated; the other lights and interior lighting remain off.

With the ignition device turned to STOP, bring the light switch to position

to switch on the side lights, the instrument panel lights and to switch off the daytime running lights.

FOG LIGHTS

(for versions/markets where provided)

With side lights and dipped beam headlights on, press switch to switch on the fog lights.

To switch off the fog lights press the switch again or turn it to position O.

REAR FOG LIGHT

Press button to switch the light on/off.

The rear fog light switches on only when the dipped beam headlights or fog lights are switched on. The light switches off by pressing button or by switching off the main beam headlights or the fog lights.

19

GETTING TO KNOW YOUR CAR

PARKING LIGHTS

These lights can be switched on with ignition device at STOP or with key removed, by moving the light switch to position O and then to position . The warning light switches on

in the instrument panel.

HEADLIGHTS OFF TIMER

Function activation: with lights on, bring the ignition device to STOP. Then switch off the headlights within 45 seconds: timing will start when the light switch is turned to O.

IMPORTANT To activate this functions the headlights must be deactivated within 45 seconds after the ignition device has been taken to STOP.

Function deactivation: this function is deactivated by switching on the headlights, the side lights or bringing the ignition device to MAR. If the headlights are switched off before ignition, they will go out normally.

MAIN BEAM HEADLIGHTS

To activate the fixed main beam headlights push left lever A fig. 26 (vehicle travel direction). The light switch must be turned to AUTO or .

The unstable position is activated by pulling the lever towards you.

With main beam headlights on, the warning light on the instrument

panel will come on at the same time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

26

 

 

 

 

J0A0063C

The main beam headlights are deactivated bringing the lever back to the central stable position. Warning light switches off in the instrument panel.

Automatic main beam headlights

This function is enabled with the display Menu or the Uconnect™ system,

and with the light switch turned to AUTO.

The first time the main beam headlights are activated (pushing the left lever), the function is activated (green warning light come on in the instrument panel).

If the main beam headlights are actually on, the blue warning light will also come on in the instrument panel.

To deactivate the automatic function rotate the light switch ring nut to position .

DIRECTION INDICATORS

Bring left lever A fig. 26 to the (stable) position:

upwards: activates the right direction indicator;

downwards: activates the left direction indicator.

"Lane Change" function

If you wish to signal a lane change, place the left lever in the unstable position for less than half a second. The direction indicator on the side selected will flash five times and then switch

off automatically.

HEADLIGHT ALIGNMENT ADJUSTMENT

Headlight alignment corrector

This device only works with the ignition device at MAR and the dipped beam headlights on.

To adjust rotate ring nut A fig. 27.

Position 0: one or two people on the front seats;

Position 1: 4 passengers

Position 2: 4 passengers + load in the luggage compartment

20

27

J0A0064C

Position 3: driver + maximum permitted load stowed only in the luggage compartment

IMPORTANT Check the headlight alignment each time the weight of the load transported changes.

INSTRUMENT PANEL AND CONTROL BUTTON GRAPHICS BRIGHTNESS ADJUSTMENT

With side lights or headlights on, turn ring nut B fig. 27 upwards to increase light brightness of the instrument panel and of the control button graphics, or turn the ring nut downwards to decrease it.

WARNING

18)The daytime running lights are an alternative to the dipped beam headlights for driving in countries where it is compulsory to have lights on during the day; where it is not compulsory, the use of daytime running lights is permitted.

19)Daytime running lights cannot replace dipped beam headlights when driving at night or through tunnels. The use of daytime running lights is governed by the highway code of the country in which you are driving. Comply with legal requirements.

INTERIOR LIGHTS

FRONT COURTESY

LIGHTS

Switch A fig. 28 is used to switch on/off the courtesy lights bulbs.

Switch positions:

central position: lights C and E switch on/off when the doors are opened/ closed;

pressed to the left (position OFF): lights C and E are always switched off;

pressed to the right (position ): lights C and D are always switched on. The lights switch on/off gradually. Switch B fig. 28 switches light C on/off. Switch D fig. 28 switches light E on/off.

21

GETTING TO KNOW YOUR CAR

28

J0A0024C

Courtesy light timing

On certain versions, to facilitate getting in/out of the vehicle at night or in poorly-lit areas, two timed modes have been provided.

when getting into the vehicle;

when getting out of the vehicle.

22

WINDSCREEN/REAR WINDOW WIPER

WINDSCREEN

WIPER/WASHER

20) 7) 8)

This operates only with the ignition device at MAR.

29

J0A0071C

Ring nut A fig. 29 can be set to the following positions:

windscreen wiper off.

1 intermittent operation (low speed)

2 intermittent operation (high speed);

LOW continuous slow operation.

HIGH continuous fast operation.

Move the stalk upwards (unstable position) to activate the MIST function: operation is limited to the time for which the stalk is held in this position. When released, the stalk will return to its default position and the windscreen wiper will be automatically stopped. This function is useful to remove small deposits of dust from the windscreen, or morning dew.

IMPORTANT This function does not activate the windscreen washer; windscreen washer fluid will not therefore be sprayed onto the windscreen. To spray windscreen washer fluid onto the windscreen, the washing function must be used. With ring nut A in position 1 or 2 , the windscreen wiper will

automatically adapt its operating speed to the speed of the vehicle.

"Smart washing" function

Pull the lever towards the steering wheel (unstable position) to operate the windscreen washer.

Keep the stalk pulled to activate both the windscreen washer jet and the windscreen wiper with a single movement; the latter turns on automatically.

The wiper stops working three strokes after the stalk is released. A further stroke after approximately 6 seconds completes the cycle.

RAIN SENSOR

(where provided)

This is located behind the interior rear view mirror, in contact with the windscreen and can detect the presence of rain and, consequently, manage the cleaning of the windscreen in accordance with the amount of water on the screen.

Activation/deactivation

9) 10)

By acting on the display menu or on the Uconnect™ system you can activate/deactivate the rain sensor. The sensor can also be deactivated by bringing the ignition device to STOP. The activation of the sensor is signalled by a "stroke" to show that the command has been acquired.

If the ignition device is moved to STOP position, leaving the ring nut A fig. 29

in 1 or 2 , when the vehicle is next started (ignition device at MAR), no wiping cycle occurs even if it rains.

REAR WINDOW

WIPER/WASHER

Activation

Turn ring nut B fig. 29 from position O to position to operate the rear window wiper as follows:

in intermittent mode when the windscreen wiper is not operating;

in synchronous mode (at half the speed of the windscreen wiper) when the windscreen wiper is operating;

in continuous mode with reverse gear engaged and the control active.

Position 1 : intermittent operation (low speed).

Position 2 : continuous slow operation.

With reverse gear engaged and windscreen wiper on, the rear window wiper is activated in continuous mode. Pushing the stalk towards the dashboard (unstable position) will activate the rear window washer jet. Keep the stalk pushed for more than half a second to activate the rear window wiper as well. Releasing the stalk will activate the smart washing function, as described for the windscreen wiper.

Deactivation

Release the lever.

WARNING

20) Make sure the device is switched off whenever the windscreen must be cleaned.

WARNING

7)Do not use the screen wiper to remove layers of snow or ice from the windscreen. In such conditions, the windscreen wiper may be subjected to excessive stress and the motor cut-out switch, which

prevents operation for a few seconds, may intervene. If operation is not subsequently restored, even after the vehicle is restarted, contact a Jeep Dealership.

8)Do not operate the windscreen wiper with blades lifted from the windscreen.

9)Do not activate the rain sensor while washing the vehicle in an automatic washing system.

10)If ice is found on the windscreen, make sure that the device was disconnected properly.

23

GETTING TO KNOW YOUR CAR

CLIMATE CONTROL

2)

MANUAL CLIMATE CONTROL SYSTEM

Controls

30

J0A0053C

A - fan activation/adjustment knob:

0 = fan off

= fan speed (7 different speeds can be chosen)

B - air recirculation activation/deactivation button (LED on: internal air recirculation on / LED off: internal air recirculation off); C - air temperature adjustment and MAX A/C function activation knob (to obtain maximum cooling of the passenger compartment move the knob to the position marked by wording MAX A/C): blue section = cold air / red section = hot air D - climate control system compressor on/off button;

24

E - air distribution knob:

air from central outlets and side vents

air from central outlets, side vents and front and rear footwell vents

air outlet from the front and rear footwell vents and a light air flow also from the side vents on the dashboard

air outlet from the front and rear footwell vents, to the windscreen, the side windows and a light air flow also at the side vents on the dashboard

air outlet to the windscreen, the side windows and a light air flow also at the side vents on the dashboard 4 further intermediate positions are also possible in the 5 main distributions described above.

F - heated rear window on/off button and, where provided, door mirror electric heating;

IMPORTANT Do not affix stickers to the inside of the heated rear window over the heating filaments, to avoid damage that might cause them to stop working properly.

IMPORTANT Internal air recirculation makes it possible to reach the required heating or cooling conditions more quickly depending on the mode selected. Do not use the internal air recirculation function on rainy/cold days as it would considerably increase the possibility of the windows misting.

Additional heater

(where provided)

The additional heater ensures more rapid passenger compartment heating. It activates in cold weather conditions, if the following conditions are verified:

outside temperature low;

engine coolant temperature low;

engine on;

fan speed set at least to 1st speed;

knob C turned completely clockwise to red section.

The heater is switched off when at least one of the conditions above is no longer verified.

Note The power of the electric heater is modulated according to the battery voltage.

WARNING

2) The system uses R1234YF coolant, which does not pollute the environment in the event of accidental leakage. Under no circumstances use R134a and R12 fluids, which are incompatible with the components of the system.

25

GETTING TO KNOW YOUR CAR

AUTOMATIC DUAL ZONE CLIMATE CONTROL SYSTEM

Controls

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

31

 

 

 

J0A0054C

A - driver side temperature adjustment knob; B - internal air recirculation on/off button;

C - climate control system compressor on/off button;

D - MAX-DEF function activation button (rapid defrosting/demisting of front windows); E - climate control on/off button;

F - fan speed adjustment knob;

G - Fan speed indicator LED; (maximum fan speed = all LEDs lit; minimum fan speed = one LED lit); H - air distribution selection buttons;

Air flow to the windscreen and front side window diffusers to demist/defrost them.

Air flow at central and side dashboard vents to ventilate the chest and the face during the hot season.

26

Air flow to the front and rear footwell diffusers. This air distribution setting heats the passenger compartment most quickly, giving a prompt sensation of warmth.

+

Air flow distributed between footwell diffusers (hotter air) and central and side dashboard vents (cooler air). This

 

 

distribution setting is useful in spring and autumn on sunny days.

 

+

Air flow distributed between footwell diffusers and windscreen and front side window defrosting/demisting diffusers.

 

 

This distribution setting allows the passenger compartment to be warmed up efficiently and prevents the windows

 

 

 

+

from misting up.

 

Air flow distribution between windscreen demisting/defrosting diffusers and side and central dashboard vents. This

 

 

allows air to be sent to the windscreen in conditions of strong sunlight.

 

+

+

Air flow distribution to all diffusers on the vehicle.

 

I - heated rear window on/off button; (where this function is provided, pressing the button also activates demisting/defrosting of the door mirrors);

L - passenger side temperature adjustment knob;

M - SYNC function activation button (alignment of set temperatures) driver/passenger side; N - AUTO function activation button (automatic operation).

In AUTO mode, the climate control system automatically manages air distribution (the LEDs on buttons H are off). When set manually, the air distribution is shown by the LEDs on the selected buttons.

In combined function mode the relevant function is enabled simultaneously

with those already set by pressing the corresponding button. If a button whose function is already active is pressed, its operation is cancelled and the corresponding LED switches off. To restore automatic control of the

air distribution after a manual selection, press the AUTO button.

NOTES

The automatic climate control manages the Stop/Start system (engine off and vehicle at a standstill) in order to guarantee sufficient comfort inside the vehicle. In particularly severe climate conditions it is recommended to limit the use of the Stop/Start system to prevent the compressor from continuously switching on and off, with consequent rapid misting of the windows and accumulation of humidity with unpleasant smells in the passenger compartment.

When the Stop/Start system is on (engine off and vehicle at a standstill), the automatic recirculation management is turned off always taking air in from outside, to reduce the probability of the windows misting up (as the compressor is off).

27

GETTING TO KNOW YOUR CAR

ELECTRIC WINDOWS

ELECTRIC WINDOWS

21)

They operate with the ignition device at MAR and for nearly 3 minutes after

the ignition device switches to STOP (or also after the mechanical key has

been extracted, for vehicles equipped with mechanical key with remote control). When one of the front doors is opened this operation is disabled.

Driver side front door controls

The buttons are located on the door panel trim. All windows can be controlled from the driver side door panel fig. 32.

32

J0A0078C

A: front left window opening/closing. "Continuous automatic" operation during window opening/closing stage and anti-pinch system activated.

B: right front window opening/ closing. "Continuous automatic" operation during window opening/ closing stage and anti-pinch system activated.

C: enabling/disabling of rear door electric window controls;

D: left rear window opening/closing (if present). "Automatic continuous" operation during window opening/ closing, manual electric operation during window closing;

E: right rear window opening/closing (if present). "Automatic continuous" operation during window opening/ closing, manual electric operation during window closing.

Window opening

Push the buttons to open the desired window.

When any of the opening buttons on front or rear doors is pressed briefly, the window moves in stages; if the button is held down, "continuous automatic" operation is activated.

If the button is pressed again, the window will stop in the desired position.

Window closing

Lift the buttons to close the desired window.

The window closing stage occurs following the same logic described for the opening stage, for the front door windows only.

The rear door windows can only be closed "in stages".

Front window anti-pinch safety device

(where provided)

This safety system can recognise the presence of any obstacle during the window closing movement. If this occurs, the system stops the window's movement and reverts it by a few centimetres, depending on its position. The anti-crush safety function is activated both during the manual and the automatic operation of the window.

Electric window system initialisation

If power supply is interrupted, the electric window automatic operation must be reinitialised.

The initialisation procedure described below must be carried out with the doors closed and for each door:

fully close the window to be initialised, with manual operation;

28

Loading...
+ 182 hidden pages