JBL MS6200, MS9200, MS6100 User Manual 2

0 (0)
JBL MS6200, MS9200, MS6100 User Manual 2

MARINE SERIES

MS6100

MS6200

MS9200

marine speaker owner’s manual

THANK YOU

for purchasing JBL Marine Series speakers. We‘ve organized this manual to make your installation as simple and trouble-free as possible. Please read it thoroughly before proceeding. Remember to keep your sales receipt and this manual in a

safe place so both are available for future reference.

INSTALLATION WARNINGS AND TIPS

ABOUT THESE

LOUD MUSIC AND

ABOUT POWER

INSTRUCTIONS:

HEARING:

HANDLING:

Installation of marine audio

Playing loud music in a marine envi-

JBL marine speakers will produce

components can require extensive

ronment can permanently damage

reasonable volume levels with little

experience with a variety of

your hearing, as well as hinder your

amplifier power. Moreover, adding

mechanical and electrical

ability to hear marine traffic. The

an amplifier to drive your speakers

procedures. Although these

maximum volume levels achievable

and a subwoofer will enhance your

instructions explain how to install

with JBL speakers, combined with

system’s dynamic range and help

JBL marine speakers in a general

high-power amplification, may

overcome ambient noise.

sense, they do not show the exact

exceed safe levels for extended

 

installation methods for your

listening. JBL accepts no liability

Although JBL marine speakers are

particular application. If you do not

for hearing loss, bodily injury or

designed to handle the power of a

feel you have the experience, do

property damage as a result of

dedicated amplifier driven at or

not attempt the installation yourself.

use or misuse of this product.

below its rated power, make sure

Ask your authorized JBL marine

 

the amplifier is not driven far above

audio dealer about professional

GENERAL CARE:

its rated power. Doing so will “clip”

installation options.

The loudspeaker grilles may be

the output signal and can damage

 

 

cleaned with a damp cloth. Do not

any speaker. Distorted or “fuzzy”

 

 

use any cleaners or solvents on the

sound from your speakers is an

 

 

grilles or the speaker cones.

indication that the amplifier has

 

 

 

exceeded its rated power, and you

 

 

 

should reduce the volume level.

 

 

 

 

 

 

 

 

INSTALLATION TIPS:

Always wear protective eyewear when using any tools.

Turn off all audio components and other electrical devices before you start. Disconnect the negative (–) lead from your battery.

Keep speakers in their package until final installation. When moving a speaker, always rest it with the cone or dome facing up. Never use force to install any speaker.

Check clearances on both sides of a planned mounting surface before drilling any holes or installing any screws. Remember that the screws can extend behind the surface.

At the installation sites, locate and make a note of all fuel lines and electrical wiring. Use extreme caution when cutting or drilling

in and around these areas.

Before drilling or cutting holes, use a utility knife to remove unwanted fabric or vinyl to keep material from snagging in a drill bit or saw.

The stainless-steel hardware provided with your JBL marine speakers has been chosen to resist rust and corrosion.

2

Loading...
+ 2 hidden pages