JBL GTO836, Grand Touring GTO8626, Grand Touring GTO626, GTO526, GTO6426, GTO6526, Grand Touring GTO936, GTO326, GTO426, Grand Touring GTO636, GTO6536, Grand Touring GTO926 User Manual

236.54 Kb
Loading...

multielements owner’s manual

THANK YOU

for purchasing JBL Grand Touring® Series automotive speakers. We’ve organized this manual to make your installation as simple and trouble-free as possible. Please read it thoroughly before proceeding. Remember to keep your sales receipt and this manual in a safe place so both are available for future reference.

INSTALLATION WARNINGS AND TIPS

REAR DECK

PRECAUTION

In some cars, fuel tanks may be located directly beneath the rear deck. Before installation, make sure there is adequate speaker basket clearance before considering this location!

INSTALLATION TIPS

Always wear protective eyewear when using any tools.

Turn off all audio components and other electrical devices before you start. Disconnect the

(–) negative lead from your vehicle’s battery.

Keep speakers in their package until final installation. When moving a speaker, always rest it with the cone or dome facing up. Never use force to install any speaker.

Check clearances on both sides of a planned mounting surface before drilling any holes or installing any screws. Remember that the screws can extend behind the surface.

At the installation sites, locate and make a note of all fuel lines,

hydraulic brake lines, vacuum lines and electrical wiring. Use extreme caution when cutting or drilling in and around these areas.

Before drilling or cutting holes, use a utility knife to remove unwanted fabric or vinyl, to keep material from snagging in a drill bit or saw.

For door installations, check the clearance with the windows throughout the range of the window’s travel, and verify that a mounted speaker will not interfere with the window crank or power window mechanism.

If mounting speakers elsewhere, check for clearance around rear deck torsion bars, glove box or other structural elements.

Do not mount speakers where they will get wet.

INSTALLATION

Figure 1. Mounting the GTO426, GTO526, GTO626, GTO6526, GTO636, GTO6536, GTO926, GTO936 or GTO836 using the supplied grille.

Rotate tweeter so it is angled toward the listener using the UniPivot(patent no. 6,002,780)

feature on the GTO526, GTO626, GTO6526, GTO926 and GTO8626.

Figure 2. Modifying the GTO426 to be installed in locations requiring fewer than four mounting “ears.”

NOTE: Grip the tab (preferably with pliers) and bend to detach it from the speaker.

INSTALLATION

Figure 3. Mounting the GTO8626 and GTO6426.

Figure 4. Mounting the GTO626, GTO6526,

 

GTO636 or GTO6536 using the supplied grilles.

NOTE: The GTO8626 and GTO6426 speakers are designed to be installed under factory grilles. Consequently, no grilles are packaged with these models.

Figure 5.

Mounting the GTO6526 or GTO6536 in 165mm speaker locations or GTO626, GTO636 in 160mm speaker lacations.

Figure 6. Mounting the GTO626 and GTO636 in standard speaker locations.

Rotate tweeter so it is angled toward the listener using the UniPivot(patent no. 6,002,780) feature

on the GTO526, GTO626, GTO6526, GTO926 and GTO8626.

Note: The GTO326 mounts similarly.

Note: The GTO626 and GTO636 use an adapter to fit a variety of different 165mm openings. Select an appropriate adapter ring and secure it to the vehicle using the sheet-metal screws provided, then attach the speaker to the ring with the machine screws.

SPECIFICATIONS

 

GTO326

GTO426

GTO526

GTO626

GTO6526

GTO636

GTO6536

GTO926

GTO936

GTO6426

GTO8626

GTO836

Type:

87mm

100mm

130mm

160mm

165mm

160mm

165mm

150x225mm

150x225mm

100x150mm

150x200mm

200mm

 

two-way

two-way

two-way

two-way

two-way

three-way

three-way

two-way

two-way

two-way

(125x175mm)

three-way

 

 

 

 

 

 

 

 

 

 

 

two-way

 

Speaker

 

 

 

 

 

 

 

 

 

 

 

 

Impedance:

4 ohms

4 ohms

4 ohms

4 ohms

4 ohms

4 ohms

4 ohms

4 ohms

4 ohms

4 ohms

4 ohms

4 ohms

Power

25W RMS,

35W RMS,

45W RMS,

60W RMS,

60W RMS,

60W RMS,

60W RMS,

100W RMS,

100W RMS,

40W RMS,

60W RMS,

110W RMS,

Handling:

75W Peak

105W Peak

135W Peak

180W Peak

180W Peak

180W Peak

180W Peak

300W Peak

300W Peak

120W Peak

180W Peak

330W Peak

Sensitivity

 

 

 

 

 

 

 

 

 

 

 

 

(2.83V, 1m):

89dB

89dB

89dB

90dB

90dB

90dB

90dB

91dB

91dB

89dB

90dB

91dB

Frequency

 

 

 

 

 

 

 

 

 

 

 

 

Response:

90Hz – 21kHz

90Hz – 21kHz

70Hz – 21kHz

55Hz – 21kHz

55Hz – 21kHz

55Hz – 21kHz

55Hz – 21kHz

50Hz – 21kHz

50Hz – 21kHz

75Hz – 21kHz

50Hz – 21kHz

50Hz - 21kHz

Mounting

 

 

 

 

 

 

 

 

 

 

 

 

Depth:

37mm

54mm

61mm

54mm

59mm

54mm

59mm

83mm

83mm

47mm

62mm

74mm

Cut-Out

 

 

 

 

 

 

 

 

 

 

 

 

Diameter:

85mm

93mm

120mm

131mm

143mm

131mm

143mm

224x153mm

224x153mm

147x85mm

183x126mm

185mm

General Care

The loudspeaker grilles may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grilles or the speaker cones.

A valid serial number is required for warranty coverage.

Features, specifications and appearance are subject to change without notice.

Declaration of Conformity

We, Harman Consumer International

2, route de Tours

72500 Chateau-du-Loir

France

declare in own responsibility that the products described in this owner’s manual are in compliance with technical standards:

EN 50081-1:1992

EN 50082-1:1997

Emmanuel Millot

Harman Consumer International

Chateau-du-Loir, France. 3/03

JBL Consumer Products

250 Crossways Park Drive, Woodbury, NY 11797 USA 1.800.336.4JBL (4525) • FAX 1.516.682.3523 • www.jbl.com

© 2003 Harman International Industries, Incorporated

JBL is a registered trademark of

Harman International Industries, Incorporated. Part No. GTMEOM3/03