Size:
1.61 Mb
Download

DSC 400

DSC 800

O W N E R ’ S G U I D E

PRODUCT LINE:

®

MODEL

NUMBER: DSC 400 (230V)/DSC 800 (230V)

DESIGN GOAL: Bring the thrill of live performance and movie sound to the home environment by calling on JBL’s professional engineering leadership.

SATELLITE TYPE: Titanium-laminate-dometweeter

SUBWOOFER TYPE: Bass-reflexenclosure

PORT DESIGN: FreeFlow™ flared

PROFESSIONAL REFERENCE: Cinema Systems

W E L C O M E

And thank you for purchasing this

All of the optional system settings

Warning

JBL Digital Simply Cinema system.

have been preset at our factory for

To prevent fire or shock hazard,

This state of the art system includes

correct operation of the system. All

do not expose the unit to rain or

everything you need to experience

you have to do is insert a disc, sit

moisture.

movie theater quality digital video

back, and enjoy a great home theater

To avoid electrical shock, do not open

and audio in the comfort of your own

experience.

living room. The only thing you need

You may want to change some of the

the cabinet.

to add is your own TV. We have

Refer servicing to qualified service

optional settings. A description of all

designed this system to be

easy to

the optional settings and instructions

personnel only.

set up, and even easier to use. But

for changing them are found in the

The AC cord must only be changed at

please review this manual before you

second half of the manual.

qualified service facility.

 

operate your system. Have it handy

 

This system was designed to provide

• This appliance is classified as a

while you are setting the system up

and keep it available for future refer-

you with many years of reliable

 

CLASS 1 LASER product.

ence or in the unlikely event that you

operation with a minimum of care and

• The CLASS 1 LASER PRODUCT

encounter any unexpected problems.

maintenance. Every component in

 

MARKING is located on the rear

We have tried to keep this manual as

your system was in perfect working

 

panel.

simple as possible. It begins with a

condition when it left our factory. If

• This product contains a low power

description of the important controls

you experience any problems with

 

laser device. To ensure continued

on the main unit and the remote. It

the set-upor operation of this system,

 

safety, do not remove any cover or

then explains how to connect the

please review the Troubleshooting

 

attempt to gain access to the inside

speakers, your TV, and optional

Guide at the end of this manual

 

of the product.

external sources to the main unit,

before you contact your authorized

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

JBL dealer.

Caution

how to position the speakers for the

most natural surround sound, and

The serial number of your system can

Refer servicing to qualified service

then how to operate the DVD/CD

be found on a label on the back panel

personnel only.

 

 

 

 

 

 

 

 

 

player and the AM/FM Stereo

of the main unit, and also on the

 

 

 

 

 

 

 

 

The following marking

is printed on

Receiver.

display carton. Please record the

the rear panel.

 

 

 

 

 

 

 

 

 

 

 

serial number in the space below. You

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

may need to refer to this number if

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

your system ever needs to be

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

serviced or for insurance purposes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model no.: DSC400

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Serial No.: ___________________

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model no.: DSC800

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Serial No.: ___________________

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

T A B L E O F C O N T E N T S

Introduction

Page

Speaker Setup

30

 

 

Important Safeguards and Precautions

3

Audio Mode Setting

30

 

 

Front Panel Controls

5

Dolby Digital Setup

 

31

 

 

 

 

 

Front Panel Display

6

Dual Mono Setting

 

31

 

 

Rear Panel Connections

7

Dynamic Range Setting

 

31

 

 

Remote Control

8

Preferences Setup

 

31

 

 

Basic Information

10

Selecting the Language for Audio

31

 

 

About This Manual

10

Selecting the Language for Subtitles

32

 

 

Notes On Discs

10

Selecting the Language for Disc Menu

32

 

 

DVD Regional Coding

10

Setting the Parental Control Level

32

 

 

Inserting Batteries into the Remote Control

10

Changing the Password

33

 

 

Installation

Page

Returning to the Original Factory Default Settings

33

 

 

 

 

 

 

 

 

 

 

 

 

Speaker Placement

11

Other Functions

Page

System Connections

13

Angle Selection

34

 

 

Antenna Connections

14

Subtitle Language Selection

34

 

 

TV, Audio and Power Connections and Sub Auto On

15

Audio Language/Format Selection

34

 

 

TV and Aux Connections

15

Listening To The Radio

35

 

 

Connecting AC Power

15

RDS Operation

35

 

 

Subwoofer Auto-On

15

Listening To An External Source

36

 

 

Adjusting Speaker Levels

16

Selecting Listening Modes

 

 

 

36

 

 

Using Tuner Presets

17

Surround Mode Chart

 

 

 

37

 

 

Presetting Radio Stations

17

Using The Sleep Timer

 

 

 

38

 

 

Recalling Preset Stations

17

MP3 Playback

 

38

 

 

Changing Preset Stations

17

Adjusting The Speaker Volume And Treble Controls

40

 

 

Playing Disc

 

 

 

Page

Picture Zooming

41

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Basic Playback

 

 

 

18

Additional Information

Page

Slow Motion

Play

19

Troubleshooting

42

 

 

Frame By Frame Advance

19

Glossary

44

 

 

Locate a Point Quickly

19

Specifications

45

 

 

Skip to Next or Previous Track/Chapter/Title

19

 

 

 

 

 

 

 

 

 

 

Using the Individual DVD Disc Menu

20

 

 

 

 

 

 

 

 

 

 

Repeat Playback

21

 

 

 

 

 

 

 

 

 

 

Program Play (Audio CD’s and VCD’s Only)

22

 

 

 

 

 

 

 

 

 

 

Selecting a Start Point

23

 

 

 

 

 

 

 

 

 

 

 

 

Declaration of Conformity

 

 

Selecting a Start Point by Chapter or Time Code

23

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Selecting a Track Using Number Buttons

23

 

 

 

 

 

 

 

 

 

 

Checking Information Using Display Button

24

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Settings And Adjustments

 

 

Page

 

We, Harman Consumer International

 

 

 

 

 

 

 

 

2, route de Tours

 

 

 

 

Using the Set-UpMenu and Navigation Buttons

 

25

 

 

 

 

 

 

 

 

 

72500 Château-du-Loir

 

 

 

 

Set Up Menu Item List

 

26

 

 

France

 

 

 

 

 

 

declare in own responsibility, that the product

 

 

 

 

 

General Setup

27

 

 

 

 

described in this owner’s manual is in

 

 

 

 

Selecting the On Screen Display (OSD) Language

27

 

compliance with technical standards:

 

 

 

 

Screen Saver Setting (SCR Saver)

27

 

EN 50081-1:1992

 

 

 

 

TV Display Setting

28

 

EN 50082-1:1992

 

 

 

 

TV Type Setting (Multi / NTSC / PAL)

28

 

EN 60065-1:1998

 

 

 

 

 

EN

50013/A14:1999

 

 

 

 

 

 

Video Out Setting

29

 

EN

50020/A14:1999

 

 

 

 

 

 

Angle Mark Setting

29

 

EN

55022:1998

 

 

 

 

 

 

 

 

EN

61000-3-2/A14:2000

 

 

 

 

 

 

 

 

 

 

 

 

EN

61000-3-3/1:1995

 

 

 

 

 

 

 

 

 

 

 

 

 

Luc

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

JBL,

 

 

 

 

 

 

 

 

 

 

 

Harman Consumer International

 

 

 

 

 

 

 

 

 

 

 

France, 09/01

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

IMPORTANT SAFEGUARDS AND PRECAUTIONS

 

Power Cord Protection

Non-UsePeriods

Stacking

 

To avoid any malfunctions of the

• When the controller is not being

Place the controller in a horizontal

 

system controller or subwoofer, and

used, turn it off.

position and do not place any object

 

to protect against electric shock, fire

• When left unused for a long period

on it.

 

or personal injury, please observe the

of time, the controller and

Condensation

 

following:

subwoofer should be unplugged

 

• Hold the plug firmly when connect-

from the household AC outlet.

Moisture may form on the pickup lens

 

ing or disconnecting the AC power

 

 

Foreign Objects Inside

in the following conditions:

 

cord.

 

• Immediately after a heater has been

 

• Keep the AC power cord away from

Do not put any foreign object on the

turned on.

 

heating appliances.

 

disc tray.

• In a steamy or very humid room.

 

• Never put any heavy object on the

 

 

• When the unit is suddenly moved

 

AC power cord.

 

 

 

from a cold environment to a warm

 

• Do not attempt to repair or modify

 

 

 

one.

 

 

 

 

the AC power cords in any way.

 

 

 

 

 

 

If moisture

forms

inside this unit, it

 

 

 

 

Location and Handling

 

may not

operate

properly. In this

 

• The apparatus shall not be exposed

 

case, turn

on the

power and wait

 

 

about one

hour for

the moisture to

 

to dripping or splashing and no

 

 

 

evaporate.

 

 

 

 

objects filled with liquids, such as

 

 

 

 

 

 

 

 

 

 

 

vases, shall be placed on the

 

On Adjusting Volume

 

apparatus.

 

Do not turn up the volume while

 

• Air vents are provided in the cabinet

 

 

to prevent excessive temperatures

 

listening to a passage with very low

 

inside the unit. Do not place this unit

 

level or no audio signals. If you do,

 

in closed spaces, cover it, or other-

 

the speakers may be damaged when

 

wise block the vents.

 

a peak level portion is played.

 

• Do not place this unit in direct sun-

 

 

 

 

 

 

 

light or near heat sources.

 

 

 

 

 

 

 

• Keep this unit away from strong

 

 

 

 

 

 

 

magnetic objects.

 

 

 

 

 

 

 

• Do not insert or drop anything into

 

 

 

 

 

 

 

this unit through the air vents as this

 

 

 

 

 

 

 

could cause serious damage, pos-

 

 

 

 

 

 

 

sibly resulting in fire.

 

 

 

 

 

 

 

• Do not place any object containing

 

 

 

 

 

 

 

water or other liquids near the

 

 

 

 

 

 

 

controller. In the event that liquid

 

 

 

 

 

 

 

should enter the cabinet, unplug the

 

 

 

 

 

 

 

unit immediately and contact your

 

 

 

 

 

 

 

authorized JBL dealer immediately.

 

 

 

 

 

 

 

• Do not remove the cabinet.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Touching parts inside the cabinet

 

 

 

 

 

 

 

could result in electric shock and /

 

 

 

 

 

 

 

or damage to the unit.

 

 

 

 

 

 

 

• Do not use the unit in a car.

 

 

 

 

 

 

 

The operation cannot be guaran-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

teed.

 

 

 

 

 

 

3

IMPORTANT SAFEGUARDS AND PRECAUTIONS

If There is Noise Interferen-

Copy protection

Unpacking

ce on the TV While a Broad-

This DVD player supports Macro-

Check that you have the following

 

 

cast is Being Received

vision copy protection. On DVD discs

items:

 

 

Depending on the reception condition

that include a copy protection code, if

DSC100DVD-RDSDVD

 

 

the contents of the DVD disc are

player/controller/tuner (1)

 

 

of the TV, interference may appear on

 

 

copied using a VCR, the copy pro-

• Subwoofer (1)

the TV monitor while you watch a TV

tection code prevents the videotape

• Center speaker (1)

broadcast and the controller is left

copy from playing normally.

 

• Satellite speakers (4)

on. This is not a malfunction of the

 

 

 

 

 

• Remote control (1)

controller or the TV. To watch a TV

For Optimum Performance

• AAA batteries (2)

broadcast, turn off the controller.

The controller is a precision device

• SCART A/V cable (1 meter)

 

 

Service

• Controller/subwoofer cable

that is constructed using extremely

(3 meter)

• Do not attempt to service the

accurate technology. Soiling or

• Left/Center/Right/Front speaker

friction affecting the pickup lens or

controller or subwoofer yourself.

cables (3x3 meter)

disc drive can impair the image

• Please contact your authorized JBL

• Surround speaker cables

quality. In the worst case, neither

dealer.

(2x12 meter)

video nor audio will be played back.

Copyright

• AM loop antenna (1)

To obtain optimum picture quality, the

• FM antenna (1)

 

 

player should be checked (cleaning

Audio-visualmaterial may consist of

• Owner’s Manual (1)

and replacement of some parts)

copyrighted works which must not be

 

 

 

every 1,000 hours. Note that this

 

 

 

recorded without the permission of

 

 

 

period varies depending on the

 

 

 

the owner of the copyright.

 

 

 

environment (temperature, humidity,

 

 

 

Please refer to relevant laws

 

 

 

dust) in which the player is used.

 

 

 

covering copyright protection.

 

 

 

Do not attempt to clean the pickup

 

 

 

 

 

 

 

 

 

 

lens yourself.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

F R O N T P A N E L C O N T R O L S

 

 

 

 

Volume

 

 

 

 

Source

 

Power

 

 

Open/

Select

 

 

 

Close

 

DVD

VCD

CD

MP3

Headphone

 

Volume

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Refer to the pages indicated in parentheses for details.

POWER (page 15). Turn on and off

FWD. While playing a disc

SELECT (page 40). Select an audio

the main power of the system.

(page 19), press this button to select

channel to check or adjust its level.

(Note: This switch must be “on” in

the next title, chapter or track. While

VOLUME + (page 16, 40). Increase

order to operate the system with the

listening to the radio (page 36), press

the master volume level or the

remote control.)

this button to tune to a higher

selected channel level.

Disc Tray (page 18). Place a disc

frequency.

SOURCE (page 17, 18, 35, 36).

For automatic tuning, press and hold

on the tray.

it for more than 1 second.

Select the component you want to

 

REV. While playing a disc

use. In standby mode, press this

A STOP (page 18). Stop playing a

 

 

 

 

 

(page 19), press this button to select

button to turn on the power of this

disc.

the previous title, chapter or track.

system.

 

 

 

 

 

 

 

While listening to the radio (page 35),

G/B PLAY / PAUSE (page 18). Play

VOLUME – (page 16, 40).

press this button to tune to a lower

or pause a disc.

Decrease the master volume level or

frequency.

 

 

 

REMOTE SENSOR. Receives the

the selected channel level.

For automatic tuning, press and hold

remote control signals.

OPEN/CLOSE (page 18). Open or

it for more than 1 second.

 

 

 

Front Panel Display (page 6).

close the disc tray.

 

 

Indicate the playing time, etc.

POWER LED (page 18).

 

 

 

 

 

 

PHONES jack. Connect head-

Power On: LED lights Blue

 

phones to this jack. (Headphones not

Standby:

LED lights Red

 

included.)

Mute:

LED blinks Red

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

F R O N T P A N E L D I S P L A Y

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RDS

PTY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RDS

PTY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Refer to the pages indicated in

 

 

 

 

 

 

 

 

parentheses for details.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Speakers Icon (page 16, 36).

Mono (page 35). Illuminates when

Phan (Phantom)

(page 37).

Indicates which of the six speakers

unit is set to MONO FM mode.

Illuminates when

“Pro Logic

are operating.

Stereo (page 35). Illuminates

Phantom” is selected.

 

 

 

 

 

 

 

 

Status Bar. Shows the operating

when a stereo FM station is received.

Nor (Normal) (page 37).

information, such as “OPEN”,

DTS. Illuminates when the disc

Illuminates when “Pro Logic Normal”

“CLOSE”and

“LOADING”, etc. Shows

or “3-StereoNormal” is selected.

playing outputs DTS audio.

the type of disc playing: DVD, CD and

Dolby 3-Stereo(page 37).

 

FM/AM Frequency. In AM mode,

MP3, etc. Shows track and time

 

 

Illuminates when “3-StereoNormal”

“kHz” lights up. In FM mode, “MHz”

information of the CD or MP3 disc.

or “3-StereoWide” is selected.

lights up.

Shows the tuner band and frequency.

Dolby Digital (page 37).

 

 

 

Sleep (page 38). Illuminates when

Wide (page 36). Illuminates when

the sleep timer is on.

“Pro Logic Wide” or “3-StereoWide”

Illuminates when the disc playing

outputs Dolby Digital audio.

mode is selected.

Memory. Illuminates when the

Dolby Pro Logic (page 37).

 

 

 

program play mode is set (page 22).

 

 

 

 

 

 

Illuminates when the playing disc is

Illuminates when presetting radio

 

 

 

 

 

 

recorded with Dolby Pro Logic

stations (page 17).

 

 

 

 

 

 

format. Illuminates when “Pro Logic

 

 

 

 

 

 

 

 

 

 

Normal”, “Pro Logic Phantom” or

 

 

 

 

 

 

 

 

 

 

“Pro Logic Wide” is selected.

 

 

 

 

 

PTY (page 35). Illuminates when

 

 

 

 

 

an RDS station is received,

 

 

 

 

 

 

 

 

 

 

transmitting any PTY (Program Type)

 

 

 

 

 

code.

 

 

 

 

 

RDS (page 35). Illuminates when

 

 

 

 

 

an RDS station is received.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

R E A R P A N E L C O N N E C T I O N S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Refer to the pages indicated in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

parentheses for details.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AM Antenna (page 14). Connect to

SCART In/Out (page 15). Connect

AC Power Cord

(page 15).

 

 

 

 

 

 

the supplied AM loop antenna.

to a TV SCART input. (SCART cable

Connect to a 230V

wall outlet.

 

 

 

 

 

 

FM Antenna (page 14). Connect to

included.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the supplied FM antenna.

Video Out (page 15). Connect to a

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio Out (page 15). Optional

TV video input. (Composite video

 

 

 

 

 

 

 

 

 

 

 

 

 

cable not included).

 

 

 

 

 

 

 

 

 

 

 

 

 

connection to a TV set or external

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

audio system (also for recording

S-Video Out (page 15). Connect to

 

 

 

 

 

 

 

 

 

 

 

 

 

devices). Not necessary when using

a TV S-Videoinput.(S-Videocable

 

 

 

 

 

 

 

 

 

 

 

 

 

DSC loudspeaker system and

not included).

 

 

 

 

 

 

 

 

 

 

 

 

 

subwoofer connection.

System Audio Output (page 13).

 

 

 

 

 

 

 

 

 

 

 

 

 

AUX Audio In (page 15). Connect

 

 

 

 

 

 

 

 

 

 

 

 

 

Connect to "System Audio Input" on

 

 

 

 

 

 

 

 

 

 

 

 

 

to a line-levelanalog audio source:

the DSC active subwoofer.

 

 

 

 

 

 

 

 

 

 

 

 

 

TV, tape player, Minidisc, PC, etc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

R E M O T E C O N T R O L

 

 

 

 

 

OPEN /

 

24

 

STANDBY

DVD

TUNER

AUX

CLOSE

 

1

 

 

 

 

 

11

25

 

GOTO

ZOOM

SETUP

TITLE

RETURN

 

2

 

 

 

 

 

12

26

 

 

 

 

MENU

 

 

 

1

2

3

/ PBC

REPEAT

 

 

 

 

 

 

 

13

 

3

4

5

6

ANGLE

A - B

 

 

 

 

 

 

 

14

 

 

7

8

9

SLEEP

MUTE

15

 

 

 

 

 

 

 

 

 

>10

0

 

LISTENING

+

16

 

 

 

 

 

 

 

 

 

PROGRAM

N / P

TEST

 

ADJ/VOL

17

 

 

TONE

SELECT

 

4

_

 

 

 

 

 

 

 

5

 

 

 

 

 

18

27

 

 

 

ENTER

 

 

19

 

6

 

 

STEP

AUDIO

SUBTITLE

20

 

7

 

 

 

21

 

STA -

STA +

MEMO

 

 

 

8

 

 

SLOW

DISPLAY

LANGUAGE

22

 

TUN -

TUN +

ST/MO

 

 

 

9

 

 

 

 

 

23

 

 

 

STOP

PLAY / PAUSE

 

 

 

10

 

 

 

 

OPEN /

28

STANDBY

DVD

TUNER

AUX

CLOSE

 

GOTO

ZOOM

SETUP

TITLE

RETURN

29

 

 

 

 

MENU

 

30

1

2

3

/ PBC

REPEAT

 

4

5

6

ANGLE

A - B

31

7

8

9

SLEEP

MUTE

32

 

>10

0

 

LISTENING

 

33

 

 

 

 

 

 

 

 

+

PROGRAM

N / P

TEST

 

ADJ/VOL

 

TONE

SELECT

 

 

 

_

ENTER

SUBTITLE

STEP AUDIO

STA -

STA +

MEMO

SLOW DISPLAY LANGUAGE

TUN - TUN + ST/MO

STOP PLAY / PAUSE

34

 

 

 

 

 

 

 

 

Refer to the pages indicated in

 

 

 

 

parentheses for details.

 

 

 

 

 

 

 

 

 

STANDBY

(page 16, 17).

MEMO -STEP. Stores radio

ST/MO (STEREO/MONO)- SLOW.

 

Turns the system power on or off.

station in preset memory when tuner

Switches between mono and stereo

 

(Note: Power switch on main unit

is selected (page 17). Activates frame

during FM stereo reception (page 36).

 

must be “on“).

by frame playback when playing DVD

Activates slow-motionwhen playing

 

GO TO (page 23). Selects a

(page 19).

DVD or VCD (page 19).

 

/ STA–/STA+.Press to play

ASTOP. Stops disc playback

 

starting point to play.

 

Numbers (page 17, 20, 23).

a disc in fast forward / reverse mode

(page 18). Also used to delete stored

 

(page 19). In tuner mode, press to

program (page 22).

 

Select the items or settings or tracks

 

select previous/next preset station

 

 

directly with discs or presets with

OPEN / CLOSE (page 18).

 

(page 17).

 

tuner.

Opens or closes the disc tray.

 

 

/ (TUNING+/-).In DVD

 

PROGRAM (page 22). Stores CD

 

 

 

mode, press to select next/previous

 

 

tracks for program play.

 

 

title chapter or track (page 19). In

 

 

 

 

 

 

 

N/P (NTSC/PAL) (page 28).

tuner mode, press to select

 

 

Changes TV system temporarily

 

 

next/previous frequency (page 17).

 

 

without changing the default setting.

 

 

 

 

 

8

RETURN (page 20). Displays root

AUDIO. Selects the audio

 

AUX

(page 36).

Selects the

AUX or

 

menu when playing a DVD.

channels for sound (Only with some

TV (SCART) audio

input. (i.e.

external

 

 

 

 

 

 

 

 

 

 

 

 

REPEAT (page 21). Press to select

DVDs, with others “LANGUAGE” must

source).

 

 

 

 

 

be used).

 

 

 

 

 

 

 

 

 

Repeat 1 or Repeat All tracks (CDs) or

TITLE (page 20)

. Displays the title

 

 

 

 

 

 

titles/chapters (DVDs) playback.

SUBTITLE (page 34).

menu when playing

DVD.

 

A-B (page 21). Specifies a section

Selects desired language for subtitles

 

MENU/PBC (page 43).

 

when playing DVD.

 

 

and plays it repeatedly.

Changes to menu start function. With

 

 

 

 

 

 

 

the sound.

LANGUAGE (page 34). Selects

VCDs the control of all functions by

 

MUTE (page 18). Mutes

 

LISTENING (page 36).

audio language and format when

the DVD itself can be turned off/on

 

playing DVD.

(PBC = Playback Contol).

 

Selects desired listening

 

DISPLAY (page 24). Switches item

!ANGLE (page 34). Changes the

 

(Surround/Audio) mode.

 

displayed on screen and/or on front

angles while playing a DVD.

 

ADJUST/VOLUME (+ or –) (page

 

panel display.

"SLEEP

(page 38). Activates sleep

 

18, 40). Increase/decrease the master

 

 

 

 

 

 

DVD (page 18). Selects the input

timer.

 

 

 

 

 

 

volume level or the selected channel

 

 

 

 

level.

 

 

 

from a DVD, or other disc format

# / B

PLAY/PAUSE (page 18ff).

 

 

 

 

inserted in the disc tray.

 

SELECT

(page

40). Selects audio

Start or

pause when playing a disc.

 

ZOOM (page 41). Zoom in to

 

 

 

 

 

 

 

 

 

 

channel to

check or adjust its level.

 

 

 

 

 

 

 

 

 

enlarge picture area.

 

 

 

 

 

 

 

 

 

/ /

D/ E/ ENTER

 

 

 

 

 

 

 

 

 

SETUP (page 25ff).

 

 

 

 

 

 

 

 

 

(Navigation) (page 20ff). Move the

 

 

 

 

 

 

 

 

 

Displays or exits the SETUP menu.

 

 

 

 

 

 

 

 

 

cursor to select and execute the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

items or settings.

TEST TONE (page 16). Turns test

 

 

 

 

 

 

 

 

 

 

 

 

 

tone on and off.

 

 

 

 

 

 

 

 

 

 

 

 

 

TUNER (page 17, 35). Press to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

select radio as source. If already

 

 

 

 

 

 

 

 

 

 

 

 

 

selected, press to switch between

 

 

 

 

 

 

 

 

 

 

 

 

 

FM and AM.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

B A S I C I N F O R M A T I O N

About This Manual

Disc handling precautions

• The types of functions and

• To keep the disc clean, handle the

 

disc by its edge. Do not touch the

operations that can be used for a

 

 

surface.

particular disc vary depending on

 

• Do not stick paper or tape on the

the features of that disc. In some

 

disc.

cases, these functions and

 

 

If there is glue (or a similar

operations may differ from the

 

 

substance) on the disc, remove the

descriptions given in this manual. In

 

 

glue completely before using the

this event, follow the instructions

 

 

disc.

given on the screen. This manual

 

 

 

 

 

 

 

 

 

 

only covers basic disc operations.

 

 

 

 

 

 

 

 

 

• For some operations, the

 

icon

 

 

 

 

 

 

 

 

 

may appear on the screen. This

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

indicates that the operation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

described in this manual is not

 

 

 

 

 

 

 

 

 

available on the disc in the player.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

On-screenand front panel display

• Do not expose the disc to direct

illustrations in this manual are

 

sunlight or sources such as hot air

purely for the purposes of

 

 

ducts, or leave it in a car parked in

explanation. The actual displays

 

 

direct sunlight as there can be a

may differ slightly from these

 

 

considerable rise in temperature in-

illustrations.

 

 

side the car.

 

 

 

 

 

 

 

Notes on Discs

• After playing, store the disc in its

 

case.

Disc formats supported by this player

 

• Do not write on the label side with a

The unit can play discs bearing any of

 

ball-pointpen or other writing

the following logos:

 

utensils.

 

 

 

 

 

 

• Be careful not to drop or bend the

 

 

 

 

 

 

 

disc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD’s

Video CD’s

Audio CD’s

Disc cleaning precautions

• Before playing, clean the disc with a

8-12cmdisc

8-12cmdisc

8-12cmdisc

cleaning cloth. Wipe the disc from

 

Supports

Supports MP3,

 

VCD 1.1

CDR, CDR-W,

the center out.

 

VCD2.0 and

CD-DA

• Do not use solvents such as

 

SVCD

 

 

 

benzine, thinner, commercially

Note: Audio encoded in MPEG 2.0

available cleaners or anti-static

may not play properly on some discs,

spray intended for vinyl LPs.

although the picture will be shown.

Disc installing precautions

Discs that Cannot be Played

• Do not install more than 1 disc on

• You cannot play CD-G,CD-EXTRA,

disc tray.

PHOTO CD, CD-ROMandDVD-ROM

• Do not place the disc on the tray up-

discs.

 

 

 

 

side down.

• You may not play scratched discs.

• Do not try to close the disc tray

• You may not play discs that are

when the disc is not installed and

dusty, soiled or marked with

centered properly.

fingerprints.

 

 

 

10

Regional Coding

DVD players and discs are designed with regional restrictions which dictate the regions in which a disc can be played. If the region number

on the disc you want to play does not match the region number of your DVD player, you will not be able to play the disc. The message “WRONG REGION” will appear in the on-screendisplay.

The region code of this player is indicated on the rear and on the external packaging.

Remote Control

Be sure to follow correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

Use only the size and type of batteries specified.

Do not mix different types of batteries (e.g. Alkaline and Carbonzinc) or old batteries with new ones.

If you will not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

+-

--

+

 

S P E A K E R P L A C E M E N T

Front Speakers

Center Channel Speaker

Subwoofer

0 – 0.6m (0 – 2 ft.)

Surround Speakers

150-180cm

The front speakers should be placed

The rear delay settings in this system

The low-frequencymaterial

the same distance from each other as

have been set so that the optimum

reproduced by the subwoofer is

they are from the listening position.

position from the listener is 1m. The

mostly omnidirectional, and this

They should be placed at about the

two surround speakers should be

speaker may be placed in a

same height from the floor as the

placed slightly behind the listening

convenient location in the room.

listeners’ ears will be, or they may be

position and, ideally, should face

However, the best reproduction of

angled toward the listeners.

each other and be at a level higher

bass will be heard when the

 

than the listeners’ ears. If that is not

subwoofer is placed in a corner along

The center channel speaker should

possible, they may be placed on a

the same wall as the front speakers.

wall behind the listening position,

Experiment with subwoofer

be placed slightly behind the front left

facing forward. The surround

placement by temporarily placing the

and right speakers, and no more than

speakers should not call attention to

subwoofer in the listening position

60 cm above or below the tweeters of

themselves. Experiment with their

and moving around the room

until the

the left and right speakers. It is often

placement until you hear a diffuse,

bass reproduction is best. Place the

convenient to set the center speaker

ambient sound accompanying the

subwoofer in that location.

on top of the television set, as shown

main program material heard in the

Note: To ensure adequate ventilation,

in the drawing. Use the supplied

front speakers.

allow a minimum distance of 10cm

support leg to aim it toward the

 

 

between the subwoofer and

listener by screwing the leg in to

 

 

surrounding walls.

angle the speaker up, or unscrewing

 

 

 

 

the leg slightly to angle the speaker

 

 

 

down (applies to the DSC400 only).

 

 

 

11

S P E A K E R M O U N T I N G O P T I O N S

DSC800 Satellites and Surrounds

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

On shelves.

 

On the wall. Wall brackets are

 

On optional stands.

 

 

 

included.

 

 

 

 

 

Wall-Mounting

 

The customer is responsible for

hardware, available through

proper selection and use of mounting

hardware stores, to properly and

 

safely wall-mountthe speakers.

DSC400 Satellites and Surrounds

On shelves.

On the wall. Wall brackets are an optional extra (WB300S).

On optional stands (FS300S).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Attach plate to wall. The brackets

Slide speaker onto support.

 

Place speaker and support on wall

should be placed, if possible, so that

 

 

plate.

the screws will fasten into a wooden

 

 

 

 

 

wall stud. If that is not possible, use

 

 

 

 

 

properly selected wall anchors.

 

 

 

 

 

12

D S C S Y S T E M C O N N E C T I O N

Caution: Always make certain that the controller and the subwoofer are turned off before connecting or disconnecting anything.

Connecting the Controller to

"System Audio Input" on the

conveniently built into the subwoofer

the Subwoofer

subwoofer. This sends the bass/Low

to power your DSC satellite speakers.

Connect the special multi-pincable

Frequency Effects signal to the

 

subwoofer's own 100 Watt amplifier

 

(included) to the output marked

and sends the three front and two

 

"System Audio Output" on the

rear channels to the five 35 Watt

 

controller and to the input marked

amplifiers

 

 

 

Subwoofer

Importa nt de ta ils re ga rding the use of a utoma tic Turn

On / Sta ndby / Off a re

in

your owne r's ma nua l.

 

ON / STANDBY

OFF

POWER

 

LOUDSPEAKER OUTPUTS

RIGHT

CENTER LEFT

RIGHT

LEFT

SYSTEM AUDIO

 

 

HEA TSINK A RE DESIG NED TO

 

 

 

THIS PA NEL A ND ITS A BO V E

INPUT

 

 

BEC O ME Q UITE WA RM DURING

 

 

 

NO RMA L O PERATIO N

"WARNING : FOR

 

 

 

CONTINUED PROTECTION

 

 

 

AGAINST A RISK OF FIRE,

FRONT

SURROUND

REPLACE ONLY WITH SAME

FUSE TYPE."

SPEAKERS

SPEAKERS

"AVIS : UTILSER UN FUSIBLE

DE RECHANGE DE

 

 

 

MEME TYPE."

 

 

 

4A / 250V TYPE T

WARNING

 

A V IS

230 - 240V ~ 50Hz

Northridge, CA

SUB400 DSC400 System

AC

JBL, Incorporated

For use with

450W

A Harman International Company

 

Manufactured:

 

Connecting the Subwoofer

Right Front Speaker Center Speaker

Left Front Speaker

to the Satellites

 

 

Your DSC system includes cables for

 

 

 

 

 

 

connection of all five satellite

 

 

 

 

 

 

speakers to the subwoofer. Connect

 

 

 

 

 

 

the special error-proofconnectors at

 

 

 

 

 

 

the subwoofer end of each cable to

 

 

 

 

 

 

the appropriately marked sockets on

 

 

 

 

 

 

the rear of the subwoofer. Owners of

 

 

 

 

 

 

the DSC400 system should follow the

Subwoofer

 

 

 

instructions in the section marked

 

 

 

 

 

 

 

 

 

"DSC400 Only" for cable connection to

 

 

 

RIGHT CENTER LEFT

RIGHT LEFT

THIS PA NEL A ND ITS A BO V E

 

 

 

 

LOUDSPEAKER OUTPUTS

 

the DSC400 satellites. Owners of the

 

 

SYSTEM AUDIO

 

 

HEA TSINK A RE DESIG NED TO

 

 

INPUT

 

 

BEC O ME Q UITE WA RM DURING

 

 

CONTINUED PROTECTION

 

 

NO RMA L O PERATIO N

 

 

 

"WARNING : FOR

 

 

 

DSC800 system should follow the

Importa nt de ta ils re ga rding

AGAINST A RISK OF FIRE,

FRONT

SURROUND

 

the use of a utoma tic Turn

OFF

REPLACE ONLY WITH SAME

WARNING

ON / STANDBY

4A / 250V TYPE T

 

 

 

On / Sta ndby / Off a re in

 

FUSE TYPE."

SPEAKERS

SPEAKERS

 

 

your owne r's ma nua l.

 

"AVIS : UTILSER UN FUSIBLE

 

 

 

 

DE RECHANGE DE

 

 

 

instructions in the section marked

 

 

MEME TYPE."

 

 

 

 

 

230 - 240V ~ 50Hz

Northridge, CA

SUB400DSC400 System

 

 

 

 

 

 

A V IS

 

POWER

 

 

 

 

 

 

 

 

AC

JBL, Incorporated

 

For use with

"DSC800 Only" for cable connection to

 

 

450W

A Harman International Company

 

 

 

 

Manufactured:

 

 

 

 

 

 

 

 

the DSC800 satellites. To place the

 

 

 

 

 

 

speakers in your room, see the

Right Surround Speaker

 

 

 

 

 

recommendation on pages 11 and 30.

 

 

 

 

 

 

 

Left Surround Speaker

 

 

 

 

 

 

 

 

 

 

 

 

 

(DSC400 Only)

(DSC800 Only)

 

 

 

of the

appropriate loudspeaker and

Connect the special error-proof

 

 

 

 

the "-"

conductor to the black "-"

 

 

 

 

 

 

 

 

terminal

of the loudspeaker. Make

connectors at the loudspeaker end

 

 

 

 

 

 

 

 

certain to connect the right front

of each cable to the correct loud-

 

 

 

 

 

 

 

 

output on the subwoofer to the right

speaker. Make certain to connect the

 

 

 

 

 

 

 

 

front speaker, center output to center

right front output on the subwoofer

 

 

 

 

 

 

 

 

speaker, etc. It is important to

to the right front speaker, center

 

 

 

 

 

 

 

 

connect all speakers correctly, with

output to center speaker, etc.

 

 

 

 

 

Remove 1/2 cm of insulation from the

plus wire to plus terminal and minus

 

wire to minus terminal. Incorrect "out

 

loudspeaker end of each cable.

 

of phase" wiring will result in thin

 

Connect the "+" conductor (marked

 

sound, weak bass and a poor stereo

 

with a stripe) to the red "+" terminal

 

image.

 

 

 

 

 

13

A N T E N N A C O N N E C T I O N S

Connect the supplied AM

and FM

Connect the AM loop antenna to the

Connect the FM antenna to the

 

antennas as shown for radio

AM screw terminals.

75 Ohm FM antenna socket.

 

reception.

 

 

 

 

 

 

 

 

 

 

 

 

AM loop antenna (included)

FM antenna (included)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes:

 

 

 

Notes:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• To prevent

noise pickup, keep the

• If you connect the system to an

 

AM loop antenna away from the

outdoor antenna, ground it against

 

system and other components.

lightning.

 

• Be sure to fully extend the FM wire

• To prevent a gas explosion, do not

 

antenna.

connect the ground wire to a gas

 

• After connecting the FM wire

pipe.

 

antenna, keep it as horizontal as

 

 

 

 

 

 

 

 

 

 

 

 

 

possible. Move it until you receive

 

 

 

Outdoor FM antenna

the best reception.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you have poor FM reception

 

 

 

 

 

 

 

 

 

 

 

 

 

Use a 75-ohmcoaxial cable (not

 

 

 

 

 

 

 

 

 

 

 

 

 

included) to connect the system to an

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

outdoor FM antenna as shown below

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or to the radio antenna connector on

 

 

 

 

 

 

 

 

 

 

 

 

 

the wall for the roof antenna on your

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

house (if any).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ground wire (not included)

To ground

14

T V, A U D I O A N D P O W E R C O N N E C T I O N S

A N D S U B A U T O O N

 

 

Connecting the TV and

the DSC100DVD unit in this manner,

CDR and some others.) the Audio

optional components

use the AUX Audio Input to carry the

Out jacks should be connected to

TV Connection (method 1)

audio signal from your TV. Connecting

the analog Record In jacks of the

more than one video signal output

appropriate device. They can also

- using SCART cable (cable included)

from the DSC100DVD unit will result in

be connected to any audio input on

To view the video from DVD discs on

degradation of the video signal.

your TV, as shown in the diagrams,

your TV set, connect the SCART TV

Connecting VCR and Sat Decoder

to listen to the sound of your

Out jack of this system to the SCART

DSC100DVD through the speakers of

(method 3 and 4)

 

In jack of your TV set. If this connec-

 

your TV only, when the amp in your

Diagrams 3 and 4 show possible

tion is made, the audio signal will also

subwoofer is turned off. As soon as

connection methods for common

be routed to the TV, but as long as the

the speakers of your JBL DSC

system configurations. These are

speakers of your JBL DSC system are

system are active, the volume on

intended as guidelines only. Due to

active, the volume on your TV should

your TV should be turned down.

differences in equipment specifi-

be turned down.

 

cations, the method of connection of

Connecting the AC Power

 

 

your equipment may be different to

Notes

 

that shown. Please consult the

 

• The Power Requirement is: AC 230V,

 

Owner’s Manual of your equipment

 

50 Hz.

 

for further guidance.

 

• Connecting to power other than the

 

 

 

 

 

 

 

 

one listed above may damage the

AUDIO OUT

 

 

 

system or cause abnormal

TV SET

 

 

 

operation.

TV Connection (method 2)

 

 

 

 

 

 

• Before connecting the AC power

- using S-Videocable

 

 

 

cord of this system to a wall outlet,

If your TV set has an S-VideoInput

 

 

 

connect the speakers and other

Jack you can connect your TV to the

 

TV SET

VCR

component cables to the system.

 

 

AUDIO OUT

AUDIO OUT

 

S-VideoOut Jack on the back of this

 

 

 

• Connect the AC power cord of the

system (the S-Videoconnection cable

 

 

 

active subwoofer.

is not included). The S-Videoconnec-

 

 

 

• Connect the AC power cords of your

tion will provide the best picture qua-

 

 

 

TV and any optional components to

lity if your TV is equipped to handle S-

 

 

 

a wall outlet.

Video signals. We recommend using

 

 

 

Subwoofer Auto-On

the S-Videoconnection if your TV has

 

 

 

an S-Videoinput jack. When con-

 

 

 

Move the Power Switch on the rear

necting the DSC100DVD unit in this

AUDIO OUT

AUDIO OUT

 

TV SET

VCR

SATELLITE DECODER

panel of the subwoofer to the ON

manner, use the AUX Audio Input to

Aux Input for External Source

position to use the system. The sub-

carry the audio signal from your TV.

You may connect a line-levelstereo

woofer should normally be left on.

Connecting more than one video

analog audio source such as a Sat

When the controller is off, or is not

signal output from the DSC100DVD

receiver, tape deck, phono preamp of

sending a signal to the subwoofer, the

unit will result in degradation of the

a record player, etc. to the controller's

subwoofer will be in standby. When

video signal.

rear panel AUX Input sockets to enjoy

the subwoofer senses an audio

 

 

the benefits of your DSC system with

signal, it will automatically turn itself

 

other source components.

on. If the subwoofer does not sense a

 

• VCR Connection-Audio

signal after approximately twenty

 

minutes, it will automatically go into

 

(Cables Not Included)

 

standby.

 

To listen to the sound from your

 

If you will be away from home for an

S-VIDEOIN

stereo VCR through the speakers of

AUDIO OUT

this system, connect the Left/Right

extended period of time, or if the

TV SET

TV Connection (method 2)

audio output jacks of your stereo

subwoofer will not be used, move the

VCR to the Left/Right audio input

Power switch to the OFF position.

- using video cord:

jacks (AUX) of this system.

 

If your TV set has neither S-Videonor

 

• Audio Out Connections

 

SCART Input jacks, connect the Video

 

Out jack of this system, to the Video In

To record the sound of the DSC

 

jack of your TV set (Composite video

system with your VCR or any audio

 

cable not included). When connecting

recording device (tape deck, MD,

 

15

A D J U S T I N G S P E A K E R L E V E L S

After you have connected the system

 

 

selected, note that all six speaker

sounds lower than the front

and positioned the speakers, the next

 

 

icons in the display are on (see

speakers when the front panel

step is to adjust the level of each

 

 

 

 

page 6), otherwise press LISTENING

display and the TV screen indicate

satellite, using the Test Tone, so that

 

 

on the remote until this is the case.

that the tone is coming from the

their levels at your normal listening

 

 

 

• Stop any external source, when

surround right (SR) speaker, press

position are identical. This

 

 

 

 

 

playing, and turn the volume until

the VOL + button on the remote

adjustment should be made with the

 

 

"VOL 20" is displayed.

control to increase the level of that

Test Tone only, not while you are

 

 

 

 

2. Press TEST TONE on the remote

speaker. The front panel and TV

watching a DVD movie.

 

 

 

 

 

screen will show the new level

 

 

 

 

 

control. The test tone will start at

 

 

 

 

 

 

setting. After a few seconds the

Remember that the rear speakers are

 

 

the front left (FL) speaker. After 3

 

 

new setting will be memorized and

designed to operate only when there

 

 

seconds the sound will move to the

 

 

the test tone will move to the

is action, ambience or effects behind

 

 

center (C) speaker, and then to the

 

 

surround left (SL) speaker. Adjust

you. If you adjust the level of the rear

 

 

front right (FR), surround right (SR)

 

 

the surround left (SL) speaker in

speakers incorrectly so that you

 

 

 

 

 

and surround left (SL) speakers in

 

 

 

 

 

the same manner.

constantly hear sound behind you,

 

 

 

 

succession. The main display and

 

 

 

 

 

you will not get the proper surround

 

 

 

the TV screen will show the word

Then listen to the tone from all 5

effect.

 

 

 

 

 

"TEST" and will also indicate which

speakers again to verify that the level

 

 

 

 

 

 

 

 

sounds the same at your normal

 

 

 

 

 

 

 

ADJ/VOL +

listening position. Re-adjusteach

 

 

 

 

 

 

 

speaker up or down as required and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

press TEST TONE once more to

 

 

 

 

 

 

 

Volume

cancel the test tone function.

Power

Close

 

 

 

 

Select

Source

 

Open/

 

 

 

 

 

 

 

DVD VCD CD MP3

 

 

 

 

 

Headphone

 

Note: When matching the level of

 

 

 

 

 

 

Volume

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

each of the individual satellite

 

 

 

 

 

 

SELECT

ADJ/VOL +

speakers, it is preferable to match the

 

 

 

 

 

 

 

 

levels to the quietest channel. This

STANDBY

 

 

 

 

OPEN /

 

 

will give you more flexibility when

 

STANDBY

DVD

TUNER

AUX

CLOSE

 

 

 

 

GOTO

ZOOM

SETUP

TITLE

RETURN

 

 

adjusting the subwoofer level.

 

 

 

 

MENU

 

 

 

 

1

2

3

/ PBC

REPEAT

 

 

 

 

4

5

6

ANGLE

A - B

 

 

 

 

7

8

9

SLEEP

MUTE

 

 

After this setting is made all speaker

 

>10

0

LISTENING

+

 

 

 

PROGRAM

N / P

TONE

SELECT

 

ADJ/VOL +/-

 

levels will be adjusted for any

TEST TONE

 

 

TEST

 

ADJ/VOL

 

 

 

 

 

 

_

SELECT

 

 

 

 

 

 

 

 

surround mode and any source

 

 

 

ENTER

 

 

 

 

 

 

 

SLOW

DISPLAY

LANGUAGE

 

 

selected.

 

 

 

 

 

SUBTITLE

 

 

 

 

 

 

STEP

AUDIO

 

 

 

 

 

 

STOP

PLAY / PAUSE

 

 

 

Subwoofer Level Adjustment

 

 

 

 

 

 

 

 

Once the level of the 5 satellite

 

 

 

 

 

 

 

 

speakers has been set, you can

 

 

 

 

 

 

speaker is operating. The test tone

adjust the level of the subwoofer to

1. Turn your system on.

 

 

 

 

 

match. Insert a DVD disc and play a

 

 

 

 

 

continues cycling among the 5

passage that you are familiar with.

• Press POWER on the front panel to

 

 

 

 

speakers indefinitely.

Using the SELECT button on the

turn the system ON.

 

 

 

 

 

 

 

 

 

 

3. All 5 satellite speakers have been

remote, select the subwoofer level

• Sit in your normal listening position

 

 

 

 

adjustment. Increase or decrease the

 

 

pre-setto the same level (00 dB). If

and press STANDBY on the remote

 

 

 

 

level of the subwoofer until you are

 

 

the level of the tone from all 5

control, if the system has not turned

 

 

 

 

satisfied with its level, relative to the

 

 

speakers is the same at your

on already. The unit will go into the

 

 

 

 

5 satellite speakers.

 

 

normal listening position, no further

Active mode and the main display

 

 

 

 

 

 

 

 

 

 

adjustment is necessary. Press

 

will come on and show "NO DISC", if

 

 

 

 

 

TEST TONE again to cancel the test

 

the tray is empty still.

 

 

 

 

 

 

 

 

 

 

 

tone function. You can skip step 4

 

• Turn on your TV and select the input

 

 

 

 

 

and go to the next section.

 

on the TV to which the controller is

 

 

 

 

 

 

 

 

connected. The words "NO DISC"

 

 

 

 

4. If the level of all 5 speakers does

 

should appear on your TV, if the tray

 

 

not sound the same at your normal

 

is empty.

 

 

 

 

 

listening position you can adjust

 

• Insert a DVD disc.

 

 

 

 

 

each speaker up or down, 10 dB in

 

• If a disc is loaded already or if a

 

 

 

 

1 dB steps. For example, if the test

 

source different from DVD player is

 

 

tone from the surround speakers

 

16

U S I N G T U N E R P R E S E T S

 

Presetting Radio Stations

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

on the right) to select another pre-

 

You can preset up to 40 of your favorite AM and FM stations, in any

 

 

 

set memory number, and press

 

 

 

 

MEMO again to enter that station in

 

combination, in the tuner memory for easy recall.

 

 

 

 

 

 

 

the selected preset memory

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

number.

 

 

 

 

 

 

 

 

 

 

 

TUNER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Open/

 

 

 

 

 

 

 

 

 

 

Volume

 

 

 

You must press MEMO to memorize a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Source

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power

Close

 

 

 

 

 

 

 

 

 

 

Select

SOURCE

 

station while the Memory indicator

 

 

 

 

 

 

 

DVD VCD CD MP3

 

 

 

 

 

 

 

 

 

 

 

Headphone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Volume

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appears in the display (approximately

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 seconds), otherwise the station will

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

not be memorized.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STANDBY

DVD

 

 

 

 

 

 

 

 

 

 

 

 

7. Repeat steps 2 to 6 to enter up to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TUNER

AUX

CLOSE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPEN /

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STANDBY

 

 

 

 

 

 

 

 

 

 

 

 

 

TUNER

 

 

 

40 stations in the tuner memory.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GOTO

ZOOM

SETUP

TITLE

RETURN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

/ PBC

REPEAT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

5

6

ANGLE

A - B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NUMBER BUTTONS

7

8

9

SLEEP

MUTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

>10

0

 

LISTENING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TEST

 

 

ADJ/VOL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM

N / P

TONE

SELECT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

_

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Recalling Preset Stations

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SUBTITLE

 

 

 

 

 

 

 

 

 

1. Press STANDBY on the remote

 

 

 

 

 

 

 

STATION +/-

 

 

 

 

 

 

STEP

AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SLOW

DISPLAY

LANGUAGE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TUNING +/-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STOP

PLAY / PAUSE

 

 

 

 

MEMORY

 

 

 

control to turn the system 'ON' and,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

if necessary, press TUNER to select

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the Tuner function.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Press either STA + orSTA - on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Press STANDBY on the

remote

 

 

 

 

 

 

 

 

4. When the

desired station appears in

remote to select the desired preset

 

 

control to turn the system

On.

 

 

 

 

 

 

 

 

 

the display

(Example: FM 103.5 MHz)

memory number.

 

 

 

 

 

2. Press either TUNER on the remote

 

 

 

 

press MEMO

on the remote control.

Note: You may also use the number

 

 

 

 

 

The Memory

indicator and “P01”

 

 

control or SOURCE on the front

 

 

 

 

 

 

 

 

 

keys on the remote control to go

 

 

 

 

 

 

 

 

 

 

 

appear in the display indicating that

 

 

panel, repeatedly to select the

 

 

 

 

 

 

 

 

 

directly to one of the preset memory

 

 

 

 

 

 

 

 

 

 

 

you are ready to enter that station in

 

 

Tuner and the desired radio band,

 

 

 

 

 

 

stations. To select preset stations 1

 

 

 

 

 

 

 

 

preset memory #1.

 

 

 

 

 

AM or FM.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

through

9, press the number key.

To

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Tune to the first station you wish to

 

 

 

 

 

 

 

 

 

 

 

 

select preset station numbers higher

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

than 9 press the ">10" key one or more

 

 

preset.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

times followed by the appropriate

 

• Manual Tuning - repeatedly press

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

number key, for example:

 

 

/ TUNING +/- on the front

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To Select Station

Press These

 

 

panel or the remote control until the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Number:

Keys:

 

 

desired frequency appears on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

 

>10 and 0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

display. (Note: You must use manual

 

 

 

5. Press MEMO

on the

remote control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

 

>10 and 5

 

 

tuning if your are trying to tune to a

 

 

 

 

again to enter the station into

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21

 

>10 twice and

 

 

weak station.)

 

 

 

 

 

 

 

 

 

 

 

memory. The Memory indicator and

 

 

• Automatic Tuning - press and hold

 

 

 

 

 

 

the preset station number disappear

 

 

 

 

then 1

 

 

 

 

 

 

 

 

34

 

>10 three times

 

 

/ TUNING +/- on the front

 

 

 

 

 

 

 

 

 

and the station is memorized.

 

 

 

panel or the remote control until the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and then 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

40

 

>10 four times

 

 

display begins to scan up or down,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

then release the button. The tuner

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and then 0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

will stop at the first strong station it

 

 

 

 

 

 

 

 

 

 

 

 

Changing Preset Stations

 

 

finds. Repeat this process until it

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

stops at your desired station.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To change any of the preset stations

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

simply tune to the new station you

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. To enter the next station in memory

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

wish to memorize and enter it in the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

follow steps 2 and 3 to tune the

preset memory number you wish to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

desired station and press MEMO on

change. The new station will be

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the remote control. Then press

memorized and the previous station

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

either STA + orSTA - on the remote

will be erased.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

control or the desired NUMBER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

button (how to select see the note

 

 

 

 

 

 

 

 

17

P L A Y I N G D I S C

 

Basic DISC Playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When a disc is inserted the

 

IMPORTANT:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

following will occur depending on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the type of disc inserted.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Please note that some DVD movie discs may not have all the features described

 

 

 

 

• When playing a DVD, a DVD menu

 

 

 

in this chapter. Refer to the instructions or notes included with each disc to

 

 

 

or title menu may appear on the TV

 

 

 

determine what features and operations are available on that particular disc.

 

 

 

screen (see page 20).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• When playing a VCD, CD or MP3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

disc the player will go to stop mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

With CDs and MP3 discs the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

number of all tracks on the disc will

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

be displayed on the front panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

display and with MP3 discs the main

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

root directory will appear on the TV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

screen. With VCDs the message

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"VCD STOP" will appear on the front

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

display.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• While the disc is loading, the player

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

will not respond to any commands.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. While in the stop mode, press / B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(PLAY/PAUSE) to begin playback .

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When playback begins, press

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ADJ/VOL +/- to adjust

the volume to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a confortable listening level. To

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

shut off the speakers temporarily

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

without stopping playback, press

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MUTE on the remote control. Press

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Turn on the

TV and select the video

 

 

On TV screen

On front panel display

MUTE again to cancel mute and

 

 

 

restore the sound. During playback

 

input so that you can view DVD

 

 

 

 

WAITING

 

 

 

 

 

press PLAY/PAUSE ( /B) again to

 

video from this system.

 

 

DISC LOADING**

LOADING**

pause playback temporarily. Press

 

2. Press POWER on the front panel to

 

 

 

 

 

OPEN

OPEN

once more to cancel pause mode

 

turn on the system. The front panel

 

 

 

 

 

 

 

 

and resume playback.

 

 

 

CLOSE

CLOSE

 

display lights up.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Press STOP (A) to stop playback.

 

 

 

PLAY

PLAY

 

3. If the system is not in the DVD

 

 

 

 

 

 

 

 

 

 

 

The DVD disc will then cease

 

 

 

NO DISC

NO DISC

 

player mode, press DVD on the

 

 

playing. If the Play/Pause button is

 

 

 

 

 

 

 

 

 

 

 

 

BAD DISC

BAD DISC

 

remote control to enter DVD player

 

 

pressed, the DVD disc will continue

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD/VCD

 

mode directly, or press SOURCE on

 

 

 

 

to play from the point at which Stop

 

the front panel to select it, the JBL

 

 

WRONG

REGION (See page 10)

was pressed. Pressing STOP a

 

logo screen appears on TV.

 

 

PARENTAL

VIOLATION (See page 33)

second time exits the DVD

 

4. Press the OPEN/CLOSE button, and

 

 

(**NOTE:

While the disc is loading the player

completely. In program playback

 

 

 

mode, press STOP (A) one time to

 

place a disc on the tray.

 

 

will not respond to any commands).

 

 

 

stop playback.

 

Press OPEN/CLOSE again to close

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press it again to clear program

 

the tray. The player begins loading

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

memory. (See page 22).

 

the disc. A message will appear on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the TV screen and/or on the front

 

 

 

 

 

 

 

 

7. When the system is on, press

 

panel display as follows.

 

 

 

 

 

 

 

 

STANDBY on the

remote control to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

turn the system

off. The LED on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

front panel lights

up red. In standby

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mode, press this

button to turn ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the system. You

can also turn the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

system on by pressing SOURCE on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the main unit.

18