XPiQ inc JPM120PS13R, JPM120PS13, JPM120PS12R, JPM120PS12, JPM120PS07 Datasheet

...
0 (0)
Input
AC Input Voltage 85-264 VAC Input Frequency 47-63 Hz DC Input Voltage 120-370 VDC Power Factor 0.98 at 115 VAC, 0.96 at 230 VAC Input Current 2.2 A max at 115 VAC Inrush Current 40 A at 230 VAC cold start Start-Up time 600 ms Rise Time 30 ms
Output
Output Voltage 3.3 V to 48 V single outputs Output Power 120 Watts, see table Output Voltage +10%, -5%
Adjustment Minimum Load 0 minimum load required Tolerance ±2% max Line Regulation ±0.5% Load Regulation ±1% max, see table Ripple & Noise 100mV typical, see table Transient Response 5% max deviation, 500 µs
recovery time for a 50% load change
Temperature 0.05%/°C Coefficient
Hold Up Time 20 ms minimum at 230 VAC Overvoltage 110-135 %
Protection Overcurrent 140-170%, constant current
Protection auto restart
General
Efficiency • See Table MTBF 100,000 hrs min Leakage Current <2 mA at 240 VAC Isolation Voltage 3000 VAC Input to Output
1500 VAC Input to Ground
500 VAC Output to Ground Size 199 x 99 x 50 mm Weight 750 grams
Environmental
Operating -10 °C to +50 °C Temperature (see derating curves)
Cooling Convection cooled Humidity 20-90% RH non condensing Storage -20 °C to +85 °C
Temperature Shock & Vibration 10-500 Hz 2G 10 min/cycle
for 60 min each axis
Safety and EMC
Safety UL1950, CSA C22.2 No 950
per cUL EN60950, CE Mark LVD EMI/EMC Meets EN61000-3-2, -3, ENV50204,
CISPR22 (EN55022) Class B Immunity & Surge Meets EN61000-4-2, -3, -4,
-5, -6, -8, -11
120 Watts
JPM120 Series
AC/DC Industrial Type
Specification
Intelligent Design Quality Product
XPiQ inc.
CE Marked LVD
Low Cost
High Reliability
Power Factor Corrected
Low Ripple Noise
Adjustable Output
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xpiq.com
Holliston, MA 01746 USA
www.XPiQ.com
Loading...
+ 1 hidden pages