iOptron ASTROBOY #9403, ASTROBOY #9402, ASTROBOY #9404, ASTROBOY #9401 User Manual

377.14 Kb
Loading...

Quick Start Guide

AstroBoy® Computerized Telescope

#9401 (Pulsar Pink), #9402 (Astro Blue),

#9403 (Terra Green), #9404 (Cosmic Orange)

FEATURES

Alt-Azimuth Mount with GOTONOVATM computer control technology

Real-time GOTO and tracking features

4,000+ object database with 256 user-definable objects.

4 line, 20-character LCD hand controller with backlit LED buttons for easy operation

Dual-axis servomotor with optical encoders

Drive motor with 5-speed setting for precise tracking

Tabletop base

60mm achromatic refractor telescope for land and celestial objects observation

Optional tripod (part #9421)

Also attaches to photo tripods with ¼” camera screw

PACKAGE CONTENTS

AstroBoy® Telescope mount

45º diagonal

60mm Refractor telescope

1.25” H20mm eyepiece

Tabletop base

Plastic carrying case

#8404 Hand Controller

ONLINE CONTENTS (click under “Support” menu button) www.iOptron.com

Full manual (you can refer to the full manual for more details on set-up and operation).

Tips for operating

Reviews and feedback from other customers

Accessories information (including AC adapter, tripod, and more)

Assembly Terms

 

1

1.

Telescope Tube

 

2

2.

Dovetail Lock

 

4

3.

#8404 Hand Controller

 

6

 

4.

Altitude Lock

5

5.

Mount

 

 

 

6.Focuser

7.Diagonal

8.

Eyepiece

3

9.

Tabletop Base

 

8

7

9

NEVER USE A TELESCOPE TO LOOK AT THE SUN DIRECTLY! Looking at or near the Sun will cause instant and irreversible damage to your eye.

Children should always have adult supervision while observing.

iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com

Quick Start Guide for AstroBoy® Computerized Telescopes

Step 1. (two options)

A. Attach to tabletop base. Take the mount and the tabletop base out of the carrying box. Attach mount to base by securing the ¼” screw onto the base.

B.Attach to tripod. Attach mount to tripod by hand tightening onto the tripod. Tripod can be purchased separately (product #9421) at www.iOptron.com.

Step 2.

Lift the battery cover. Carefully pull out the battery holder from the compartment. Be sure not to accidentally disconnect the wires.

 

Step 2a.

 

Insert 6 AA batteries (not included) in the holder. Refer to the diagram

 

on the holder to orient the batteries properly. Replace the holder back

 

into the battery compartment and replace the lid.

 

Use only fresh batteries. Using old or low batteries may cause error

 

messages.

 

An optional AC adapter and 12V car plug cable are also available

 

for purchase at www.iOptron.com.

#2 knob

Step 3.

 

Slide the telescope into the dovetail slot on mount and secure the

 

telescope using dovetail lock knob (#2).

 

Note: that the dovetail is tapered and slides in one direction only (see

 

arrow in photo).

 

 

 

Step 4.

 

Plug hand controller into the HBX port on the mount. The hand controller

 

can attach magnetically to the mount arm.

Step 5. Set telescope to PARK POSITION

If you are using the telescope for land object observing, skip to Step 6.

(1)Loosen the altitude clutch; point the telescope tube directly up at the zenith. Tighten the clutch.

(2)Position the mount so that the “N-S” mark is aligned with the earth’s magnetic north and south poles (a compass may be helpful).

(3)Level the mount using the bubble on the mount by adjusting the height of the mount base or tripod legs.

iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com

+ 2 hidden pages