Invacare MK6i Series Service Manual

MK6i® Mini Color Display

Service Manual
DEALER: Keep this manual. The procedures in this manual MUST
be performed by a qualified technician.

1 General

1.1 Symbols

Signal words are used in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage. See the information below for definitions of the signal words.

WARNING

2 Safety

CAUTION

Caution indicates a potentially hazardous situation which, if not avoided, may result in property damage or minor injury or both.

Gives useful tips, recommendations and information for efficient, trouble-free use.

Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further instructions.

To ensure the safe installation of the MK6i Mini Color Display, these instructions must be followed.

WARNING

Part No 1171901 1 MK6i® Mini Color Display
DO NOT use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material such as owner’s manuals, service manuals or instruction sheets supplied with this product or optional equipment. If you are unable to understand the warnings, cautions or instructions, contact a healthcare professional, dealer or technical personnel before attempting to use this equipment
- otherwise, injury or damage may occur. This procedure MUST be performed by a qualified technician. Make sure wheelchair is Off and user is removed from wheelchair before
performing this procedure. After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.

ACCESSORIES WARNINGS

Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.

3 Overview

3.1 Kit Contents

Mk6i Mini Color DisplayMk6i Mini Color Display Service Manual, part number 1171901Power Wheelchair Wiring Guide, part number 1167603MK6i Electronics Field Reference Guide, part number 114147110 Tie-wraps

3.2 Installation Overview

To install the MK6i Mini Color Display, perform the following procedures:

Save programming settings (optional)Remove the existing display.Disconnect the existing display.Install the MK6i mini color display.Connect the MK6i mini color display.Secure the cables.Program the MK6i mini color display.

4 Usage

4.1 Save Programming Settings

Saving Programming Settings Onto the Basic Memory Card
1. Insert the memory card into the existing display.
2. Turn the wheelchair On.
3. Use the up/down arrows to select STORE TO CARD.
4. Press the Select key.
Saving Programming Settings Onto the Professional Memory Card
1. Insert the memory card into the existing display.
2. Turn the wheelchair On.
3. Use the up/down arrows to select MEMORY CARD.
4. Select SYSTEM.
5. Select SAVE.
6. Select FOLDER.
7. Select the desired folder to save to.
8. Select NAME.
9. Select the desired system to save.
10. Select START.
MK6i® Mini Color Display 2 Part No 1171901

For these procedures, refer to FIGURE 1 on page 4.

Loading...
+ 2 hidden pages