Interlogix S30-1SLC-A-60, S35-2SLC-10, S30-1SLC-A-10, S25-2MLC-2, S20-2MLC-2 User Manual

...
0 (0)

IFS SFP Tranceivers

User Manual

P/N 1069181 • REV 02.00 • ISS 22AUG11

Copyright

© 2011 UTC Fire & Security. All rights reserved.

Trademarks and

Interlogix, IFS SFP Tranceivers Brand and logo are trademarks of

patents

UTC Fire & Security.

 

 

 

 

 

 

 

Other trade names used in this document may be trademarks or registered

 

 

 

 

 

 

 

trademarks of the manufacturers or vendors of the respective products.

Manufacturer

UTC Fire & Security Americas Corporation, Inc.

 

 

 

 

 

 

 

2955 Red Hill Avenue, Costa Mesa, CA 92626-5923, USA

 

 

 

 

 

 

 

Authorized EU manufacturing representative:

 

 

 

 

 

 

 

UTC Fire & Security B.V.

 

 

 

 

 

 

 

Kelvinstraat 7, 6003 DH Weert, Netherlands

Version

This document applies to IFS SFP Tranceivers version 00.20.

Certification

N4131

 

 

 

 

 

 

 

FCC compliance

Class B: This equipment has been tested and found to comply with the limits

 

 

 

 

 

 

 

for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits

 

 

 

 

 

 

 

are designed to provide reasonable protection against harmful interference in a

 

 

 

 

 

 

 

residential installation. This equipment generates, uses, and can radiate radio

 

 

 

 

 

 

 

frequency energy and, if not installed and used in accordance with the

 

 

 

 

 

 

 

instructions, may cause harmful interference to radio communications.

 

 

 

 

 

 

 

There is no guarantee that interference will not occur in a particular installation.

 

 

 

 

 

 

 

If this equipment does cause harmful interference to radio or television

 

 

 

 

 

 

 

reception, which can be determined by turning the equipment off and on, the

 

 

 

 

 

 

 

user is encouraged to try to correct the interference by one or more of the

 

 

 

 

 

 

 

following measures:

 

 

 

 

 

 

 

• Reorient or relocate the receiving antenna.

 

 

 

 

 

 

 

• Increase the separation between the equipment and receiver.

 

 

 

 

 

 

 

• Connect the equipment into an outlet on a circuit different from that to

 

 

 

 

 

 

 

which the receiver is connected.

 

 

 

 

 

 

 

• Consult the dealer or an experienced radio/TV technician for help.

European Union

2004/108/EC (EMC directive): Hereby, UTC Fire & Security declares that this

directives

device is in compliance with the essential requirements and other relevant

 

 

 

 

 

 

 

provisions of Directive 2004/108/EC

 

 

 

 

 

 

 

2002/96/EC (WEEE directive): Products marked with this symbol cannot be

 

 

 

 

 

 

 

 

 

 

 

 

 

 

disposed of as unsorted municipal waste in the European Union. For proper

 

 

 

 

 

 

 

recycling, return this product to your local supplier upon the purchase of

 

 

 

 

 

 

 

equivalent new equipment, or dispose of it at designated collection points. For

Contact information

more information see: www.recyclethis.info.

www.utcfireandsecurity.com or www.interlogix.com

Customer support

www.interlogix.com/customer-support

Interlogix S30-1SLC-A-60, S35-2SLC-10, S30-1SLC-A-10, S25-2MLC-2, S20-2MLC-2 User Manual

Safety Notices

The fiber optic SFP transceiver modules are equipped with a Class 1 laser, which emits invisible radiation. Read the following safety warnings carefully.

Class 1 Laser Product

Complies with FDA Regulation 21 CFR 1040.10 and 1040.11

Class 1 radiation is present when the device or system is powered up. Do not look directly into a laser aperture, as prolonged exposure may cause eye damage.

Only trained and qualified personnel should be allowed to install or replace these SFP modules

Content

Overview 1

Checklist 2

Installing an IFS SFP Module 3

Connecting the fiber cable 3

Removing the SFP transceiver 4

SFP Specifications 5

Appendix A 8

Fiber Optical Cable Connection Parameters 8

IFS SFP Tranceivers User Manual

i

Loading...
+ 9 hidden pages