Intel Igel TC 32 LX CF, Igel TC 64 LX CF User Manual

652.79 Kb
Loading...

The IGEL TC-Card

Installation Guide

TC 32 LX CF and TC 64 LX CF

0

Revision 1.3 11/2004

Contents

Page

Introduction

2

PC Requirements

2

Installation

3

Mounting the TC-Card

4

Connecting the Hard Drive Cable

5

The Power Connector

6

Supported Video Cards

7

Supported Network Interface Cards (NIC)

8

1

Introduction

The TC-card from IGEL Technology offers a cost-effective entry into the world of server-based computing. Within a few minutes your old PC workstation turns into an efficient and cost-saving IGEL Clever Client. The Clever Client can then be fully managed using IGEL’s Remote Management software in the same manner as IGEL’s Clever Thin-Client terminals.

IGEL's TC-card replaces the PC's boot hard drive with a solid-state device that is significantly more reliable, produces no annoying whining noise, reduces power consumption (by 10 Watts or more) and reduces heat output.

PC Requirements

Pentium I (or above) architecture Single CPU (100 MHz or better CPU recommended)

64MB RAM or greater

Supported Video Card (2MB Video RAM required, 4MB preferred) (See list on Page 3)

Supported Network Interface Card (See list on page 3)

2

+ 7 hidden pages