Intel ATOM MI810 User Manual

1.04 Mb
Loading...

MI810

Intel® Atom® 945GSE

Mini-ITX Motherboard

USER’S MANUAL

Version 1.1

Acknowledgments

Award is a registered trademark of Award Software International, Inc.

PS/2 is a trademark of International Business Machines Corporation.

Intel and Atom are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation.

Winbond is a registered trademark of Winbond Electronics Corporation.

All other product names or trademarks are properties of their respective owners.

ii

MI810 User’s Manual

Table of Contents

 

Introduction .......................................................

1

Product Description.............................................................

1

Checklist..............................................................................

2

MI810 Specifications ..........................................................

3

Board Dimensions ...............................................................

4

Installations .......................................................

6

Installing the Memory .........................................................

7

Setting the Jumpers .............................................................

8

Connectors on MI810........................................................

12

BIOS Setup.......................................................

23

Drivers Installation ......................................

47

Intel Chipset Software Installation Utility.........................

48

VGA Drivers Installation ..................................................

50

Realtek High Definition Audio Driver Installation...........

52

LAN Drivers Installation...................................................

53

Appendix ...........................................................

55

A. I/O Port Address Map...................................................

55

B. Interrupt Request Lines (IRQ)......................................

56

C. Watchdog Timer Configuration....................................

57

MI810 User’s Manual

iii

This page is intentionally left blank.

iv

MI810 User’s Manual

INTRODUCTION

Introduction

Product Description

The MI810 Mini ITX board incorporates the Intel® 945GSE Express Chipset with ICH7M, configured with the Intel Atom processor N270 at 1.6GHz, FSB533 and the Mobile Intel 945GSE Express Chipset with the ICH7M.

The MI810 Mini ITX board features the Intel's Graphics Media Accelerator 950 core, making it compatible with Windows Vista Premium, and Chrontel CH7307 DVI accelerator to support display interfaces including VGA CRT, dual channel LVDS and a DVI port.

The new Intel® Graphics Media Accelerator 950 (Intel® GMA 950) graphics core is an intelligent and responsive graphics engine built into the chipset that is on the motherboard. This integration provides incredible visual quality, faster graphics performance and flexible display options without the need for a separate graphics card.

The main features of the MI810 Mini ITX Motherboard are:

Supports Intel Atom 270 processor with 1.6GHz speed

Two DDRII SDRAM DIMM supports up to 2GB of DDR2 400/533MHz memory

Onboard 10/100 BaseT and Intel 82574L PCI-Express Gigabit LAN

Intel® 945GSE VGA for CRT, LVDS, DVI

2x SATA, 8x USB 2.0, 4x COM, Watchdog timer

1x PCI, 1x MiniPCIe, CF socket, DC-in for +12V/+19V input

Dimensions of the board are 170mm x 170mm.

Ordering Information:

MI810F: Intel Atom, 1.6GHz, 945GSE chipset with DVI, LVDS, 1x 10/100 LAN, 1x Gigabit LAN, Mini PCI-E, PCI

MI810: Intel Atom, 1.6GHz, 945GSE chipset with DVI, LVDS, 1x 10/100 LAN, Mini PCI-E, PCI

MI810 User’s Manual

1

INTRODUCTION

Checklist

Your MI810 package should include the items listed below.

The MI810 Intel® Atom Mini-ITX motherboard

This User’s Manual

1 CD containing chipset drivers and flash memory utility

Cable kit (IDE, 2x Serial port, Serial ATA)

2

MI810 User’s Manual

 

 

INTRODUCTION

 

 

 

 

 

 

MI810 Specifications

 

 

 

 

 

 

 

 

 

 

CPU Type

Intel New architecture CPU on 45nm processor,

 

 

 

Intel® Atom™ processor N270, 1.60GHz

 

 

 

L2 Cache=512K

 

 

FSB

533MHz

 

 

Green /APM

APM1.2

 

 

BIOS

Award BIOS, support ACPI Function

 

 

Chipset

INTEL 945GSE Chipset

 

 

 

GMCH: 82945GSE 27 mm x 27 mm -998-pin FCBGA

 

 

 

ICH7M: 82801GBM 31mm x 31mm -652-pin BGA

 

 

Memory

DDRII 533 DIMM x 2

 

 

 

(w/o ECC function), supports single channel. Max. 2GB

 

 

VGA

945GSE built-in, Intel® Graphics Media Accelerator 950

 

 

 

Graphics Core, Supports CRT & 18 bits dual channels LVDS

 

 

 

interface w/ DF13 socket x2

 

 

DVI onboard

Chrontel CH7307C for DVI with connector on edge

 

 

LAN

1. ICH7M built-in 10/100BT MAC + Intel 82562ET PHY

 

 

 

2. Intel 82574L PCI Express Gigabit LAN controller x1

 

 

USB (Universal Serial

ICH7M built-in USB 2.0 host controller, support 8 ports

 

 

Bus)

 

 

 

Serial ATA Ports

ICH7M built-in SATA controller, supports 2 ports

 

 

Parallel IDE

ICH7M built-in one channel Ultra DMA 33/66/100, CF

 

 

Audio

ICH7M Built-in Audio controller ALC 662 5.1-Channel (Line-in,

 

 

 

Line-out & MIC)

 

 

LPC I/O

Winbond W83627EHG: COM1(RS232), COM2

 

 

 

(RS232/422/485), Hardware monitor (3 thermal inputs, 4

 

 

 

voltage monitor inputs, VID0-4 & 2 Fan Headers), LPT

 

 

2nd LPC I/O

Fintek F81216DG COM3 &COM4(RS232)

 

 

Digital IO

4 in & 4 out

 

 

Keyboard/Mouse

Supports PS/2 Keyboard/Mouse

 

 

Connector

 

 

 

Expansion Slots

PCI slot x1, PCI-E (x1) slot x1 and Mini PCI-E (x1) socket x1

 

 

Power Connector

DC Power jack x1 for +12V/+19V DC-in

 

 

Edge Connector

DC-IN jack

 

 

 

PS/2 Connector x1 for keyboard/mouse

 

 

 

VGA+DVI-D stack connector

 

 

 

Dual USB stack connector

 

 

 

10/100 LAN RJ45 + dual USB stack connector

 

 

 

Gigabit LAN RJ-45 + dual USB stack connector

 

 

 

3x1 stack mini jacks for HD audio (Line-in, Line-Out, Mic)

 

 

On Board

40-pin box-header x1 for IDE1

 

 

Header/Connector

CF Connector x1 @ solder side

 

 

 

10-pin header x1 for Digital I/O

 

 

 

20-pin DF11 connector x2 for COM1/COM2, COM3/COM4

 

 

 

(Pin9 can be powered with 5V or 12V or as ring-in)

 

 

 

8-pin header x 1 for USB7,8

 

 

 

10-pin header x1 for audio Line-Out & Microphone

 

 

 

SATA connector x2 for 2 SATA ports

 

 

 

DF13 connector x2 for LVDS

 

 

 

20-pin header for parallel port

 

 

Watchdog Timer

Yes (256 segments, 0, 1, 2…255 sec/min)

 

 

Other

Modem Wakeup, LAN Wakeup

 

 

RoHS

Yes

 

 

Board Size

170mm x 170mm

 

MI810 User’s Manual

3

INTRODUCTION

Board Dimensions

4

MI810 User’s Manual

INTRODUCTION

MI810 User’s Manual

5

INSTALLATIONS

Installations

This section provides information on how to use the jumpers and connectors on the MI810 in order to set up a workable system. The topics covered are:

Installing the Memory

............................................................................ 7

Setting the Jumpers................................................................................

8

Connectors on MI810 ..........................................................................

12

6

MI810 User’s Manual

INSTALLATIONS

Installing the Memory

The MI810 board supports two DDR2 memory socket for a maximum total memory of 2GB in DDR2 memory type.

Installing and Removing Memory Modules

To install the DDR2 modules, locate the memory slot on the board and perform the following steps:

1.Hold the DDR2 module so that the key of the DDR2 module align with those on the memory slot.

2.Gently push the DDR2 module in an upright position until the clips of the slot close to hold the DDR2 module in place when the DDR2 module touches the bottom of the slot.

3.To remove the DDR2 module, press the clips with both hands.

Lock

DDR2 Module

Lock

 

 

 

 

 

 

 

 

 

 

Lock

 

 

 

 

 

 

Lock

 

 

 

 

 

MI810 User’s Manual

7

INSTALLATIONS

Setting the Jumpers

Jumpers are used on MI810 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on MI810 and their respective functions.

Jumper Locations on MI810 ..................................................................

9

JP1: LCD Panel Power Selection.........................................................

10

JP2: ATX/AT Mode Select..................................................................

10

JP3, JP4, JP5: RS232/422/485 (COM2) Selection ..............................

10

JP6: COM4 RS232 +5V / +12V Power Setting...................................

11

JP7: COM3 RS232 +5V / +12V Power Setting...................................

11

JP8: Clear CMOS Setting ....................................................................

11

J15: CompactFlash Slave/Master Selection.........................................

11

8

MI810 User’s Manual

INSTALLATIONS

Jumper Locations on MI810

Jumpers on MI810............................................................................

Page

JP1: LCD Panel Power Selection ........................................................

10

JP2: ATX/AT Mode Select..................................................................

10

JP3, JP4, JP5: RS232/422/485 (COM2) Selection ..............................

10

JP6: COM4 RS232 +5V / +12V Power Setting ..................................

11

JP7: COM3 RS232 +5V / +12V Power Setting ..................................

11

JP8: Clear CMOS Setting ....................................................................

11

J15: CompactFlash Slave/Master Selection.........................................

11

MI810 User’s Manual

9

INSTALLATIONS

JP1: LCD Panel Power Selection

JP1

LCD Panel Power

 

3.3V

 

5V

JP2: ATX/AT Mode Select

 

JP2

ATX / AT

ATX mode

AT mode

JP3, JP4, JP5: RS232/422/485 (COM2) Selection

COM1/3/4 is fixed for RS-232 use only.

COM2 is selectable for RS232, RS-422 and RS-485.

The following table describes the jumper settings for COM2 selection.

COM2

RS-232

RS-422

RS-485

Function

 

JP5:

 

 

JP5:

JP5:

Jumper

1-2

3-4

5-6

JP4:

JP4:

JP4:

Setting

(pin closed)

3-5 & 4-6

1-3 & 2-4

1-3 & 2-4

 

JP3:

JP3:

JP3:

 

3-5 & 4-6

1-3 & 2-4

1-3 & 2-4

COM2 is jumper selectable for RS-232, RS-422 and RS-485.

 

 

 

 

 

Pin #

 

Signal Name

 

 

 

 

 

 

 

 

RS-232

R2-422

 

RS-485

 

 

 

 

 

 

11

DCD

TX-

 

DATA-

 

 

 

 

 

 

13

RX

TX+

 

DATA+

 

 

 

 

 

 

15

TX

RX+

 

NC

 

 

 

 

 

 

17

DTR

RX-

 

NC

 

 

 

 

 

 

19

Ground

Ground

 

Ground

 

 

 

 

 

 

12

DSR

RTS-

 

NC

 

 

 

 

 

 

14

RTS

RTS+

 

NC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16

CTS

CTS+

 

NC

 

 

 

 

 

 

18

RI

CTS-

 

NC

 

 

 

 

 

 

20

NC

NC

 

NC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

MI810 User’s Manual

INSTALLATIONS

JP6: COM4 RS232 +5V / +12V Power Setting

 

 

 

 

 

 

 

 

 

 

Pin #

Signal Name

JP6

Signal Name

Pin #

 

 

1

 

 

 

 

 

 

RI

 

+12V

2

 

 

3

 

 

 

 

 

 

RI (Default)

 

RI (Default)

4

 

 

5

 

 

 

 

 

 

RI

 

+5V

6

 

 

 

 

 

 

 

 

COM4 Settings: Pin 1-2 short = +12V, Pin 5-6 short = +5V, Pin 3-4 Standard COM Port

JP7: COM3 RS232 +5V / +12V Power Setting

Pin #

Signal Name

JP6

Signal Name

Pin #

 

1

 

 

 

 

 

RI

 

+12V

2

 

3

 

 

 

 

 

RI (Default)

 

RI (Default)

4

 

5

 

 

 

 

 

RI

 

+5V

6

 

 

 

 

 

 

 

COM3 Settings: Pin 1-2 short = +12V, Pin 5-6 short = +5V, Pin 3-4 Standard COM Port

JP8: Clear CMOS Setting

JP8

Setting

Normal

Clear CMOS

J15: CompactFlash Slave/Master Selection

J15

CF Setting

Master

Slave

MI810 User’s Manual

11

INSTALLATIONS

Connectors on MI810

The connectors on MI810 allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on MI810 and their respective functions.

Connector Locations on MI810 ...........................................................

13

FAN1: CPU Fan Power Connector......................................................

15

FAN2: System Fan Power Connector..................................................

15

CN1: DC Jack (DC in, 12V or 19V)....................................................

15

CN2: PS/2 Keyboard and PS/2 Mouse Connectors .............................

15

CN3: VGA and DVI Connectors .........................................................

16

CN4: USB5/6 Ports..............................................................................

16

CN5: 10/100 RJ-45 and USB1/2 Ports ................................................

16

CN6: GbE RJ-45 and USB3/4 Ports ....................................................

16

CN7: Audio Connector ........................................................................

16

CN8, CN9: Serial ATA Connectors ....................................................

17

CN10: Mini PCI- E(x1) Connector (bottom side) ...............................

17

CN11: Compact Flash Connector (bottom side)..................................

17

PCI1: PCI Slot (supports 2 Master) .....................................................

17

PCIE_1: PCIE x1 Slot .........................................................................

17

IDE1: IDE Connector ..........................................................................

17

J1, J4: LCD Backlight Connector ........................................................

18

J2: HDD Power Connector (Output: Max. 2A) ...................................

18

J3: ATX_12V Connector.....................................................................

18

J5: Power LED Connector ...................................................................

18

J6: Digital I/O ......................................................................................

19

J7: COM1, COM2 Serial Ports ............................................................

19

J8, J10: LVDS Connectors (1st channel, 2nd channel) .......................

19

J9: System Function Connector ...........................................................

20

J11: COM3, COM4 Serial Ports ..........................................................

20

J12: Wake On LAN Connector............................................................

20

J13: USB7/8 Port Pin Header ..............................................................

20

J14: Audio Front Header .....................................................................

21

J16: SPI Debug Tools Port (Factory use only) ....................................

21

J17: Smart Battery Connector..............................................................

21

J18: SPDIF Out Connector ..................................................................

21

J19: Parallel Port..................................................................................

21

12

MI810 User’s Manual

+ 48 hidden pages