Integra DTR-6.8 User Manual

0 (0)

DTR-6.8_En.book Page 1 Wednesday, June 20, 2007 4:16 PM

AV Receiver

DTR-6.8

Instruction Manual

DTR-6.8_En.book Page 2 Wednesday, June 20, 2007 4:16 PM

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

 

AVIS

RISK OF ELECTRIC SHOCK

 

RISQUE DE CHOC ELECTRIQUE

DO NOT OPEN

 

NE PAS OUVRIR

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

PORTABLE CART WARNING

S3125A

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Damage Requiring Service

Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power-supply cord or plug is damaged,

B.If liquid has been spilled, or objects have fallen into the apparatus,

C.If the apparatus has been exposed to rain or water,

D.If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation,

E.If the apparatus has been dropped or damaged in any way, and

F.When the apparatus exhibits a distinct change in performance this indicates a need for service.

16.Object and Liquid Entry

Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.

Don’t put candles or other burning objects on top of this unit.

17.Batteries

Always consider the environmental issues and follow local regulations when disposing of batteries.

18.If you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there is adequate ventilation.

Leave 20 cm (8") of free space at the top and sides and 10 cm (4") at the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4") away from the rear panel or wall, creating a fluelike gap for warm air to escape.

2

DTR-6.8_En.book Page 3 Wednesday, June 20, 2007 4:16 PM

Precautions

1.Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder.

2.AC Fuse—The AC fuse inside the unit is not userserviceable. If you cannot turn on the unit, contact the dealer from whom you purchased this unit.

3.Care—Occasionally you should dust the unit all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the unit immediately afterwards with a clean cloth. Don’t use abrasive cloths, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering.

4.Power WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.

AC outlet voltages vary from country to country. Make sure that the voltage in your area meets the voltage requirements printed on the unit’s rear panel (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).

The power cord plug is used to disconnect this unit from the AC power source. Make sure that the plug is readily operable (easily accessible) at all times.

For North American model

Pressing the [Standby/On] button to select Standby mode does not fully shutdown the unit. If you do not intend to use the unit for an extended period, remove the power cord from the AC outlet.

5.Never Touch this Unit with Wet Hands—Never handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by the dealer from whom you purchased this unit.

6.Handling Notes

If you need to transport this unit, use the original packaging to pack it how it was when you originally bought it.

Do not leave rubber or plastic items on this unit for a long time, because they may leave marks on the case.

This unit’s top and rear panels may get warm after prolonged use. This is normal.

If you do not use this unit for a long time, it may not work properly the next time you turn it on, so be sure to use it occasionally.

For U.S. models

FCC Information for User

CAUTION:

The user changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

For Canadian Models

NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

For models having a power cord with a polarized plug: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Modèle canadien

REMARQUE: CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003 DU CANADA.

Sur les modèles dont la fiche est polarisée: ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

3

DTR-6.8_En.book Page 4 Wednesday, June 20, 2007 4:16 PM

Thank you for purchasing an Integra AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit.

Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.

Please retain this manual for future reference.

4

Supplied Accessories

Make sure you have the following accessories:

Remote controller & three batteries (AA/R6)

Speaker setup microphone

Indoor FM antenna

AM loop antenna

Power cord

(Plug type varies from country to country.)

Speaker terminal tool

Front

Left

Front

Left

SP-B / Zone 2

Left

SP-B / Zone 2

Left

Front

Right

Front

Right

SP-B / Zone 2

Right

SP-B / Zone 2

Right

Surround

Left

Surround

Left

Surround

Right

Surround

Right

Center

Center

Surround Back

Left

Surround Back

Left

Zone 2

Left

Zone 2

Left

Surround Back

Right

Surround Back

Right

Zone 2

Right

Zone 2

Right

Front

Left

Front

Left

SP-B / Zone 2

Left

SP-B / Zone 2

Left

Front

Right

Front

Right

SP-B / Zone 2

Right

SP-B / Zone 2

Right

Surround

Left

Surround

Left

Surround

Right

Surround

Right

Center

Center

Surround Back

Left

Surround Back

Left

Zone 2

Left

Zone 2

Left

Surround Back

Right

Surround Back

Right

Zone 2

Right

Zone 2

Right

1

2

3

Speaker Cable

Speaker cable labels

*In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color.

DTR-6.8_En.book Page 5 Wednesday, June 20, 2007 11:51 PM

Table of Contents

Introduction

 

 

Important Safety Instructions ....................

2

Precautions ..................................................

 

3

Supplied Accessories..................................

4

Features ........................................................

 

6

Front & Rear Panels.....................................

7

Front Panel.....................................................

 

7

Display............................................................

 

9

Rear Panel ...................................................

 

10

Remote Controller......................................

12

Installing the Batteries ..................................

12

Aiming the Remote Controller ......................

12

About the Remote Controller Modes ............

13

Receiver/Tape Mode ....................................

13

DVD Mode....................................................

 

15

CD/MD/CDR Modes .....................................

16

Dock Mode ...................................................

 

17

About Home Theater..................................

18

Enjoying Home Theater................................

18

Connections

 

 

Connecting the AV Receiver.....................

19

About AV Connections .................................

19

Connecting Your Speakers ..........................

20

Bi-amping the Front Speakers......................

22

Connecting Antenna.....................................

23

Connecting Both Audio & Video ...................

25

Which Connections Should I Use?...............

25

Connecting a TV or Projector .......................

27

Connecting a DVD Player ............................

28

Connecting a VCR or DVD Recorder for

 

Playback ....................................................

 

30

Connecting a VCR or DVD Recorder for

 

Recording...................................................

 

31

Connecting a Satellite, Cable, Set-top box, or

Other Video Source ...................................

32

Connecting a Game Console .......................

33

Connecting a Camcorder or Other Device ...

34

Connecting Components with HDMI ............

35

Connecting a CD Player or Turntable ..........

37

Connecting a Cassette, CDR, MiniDisc, or DAT

Recorder ....................................................

 

38

Connecting a Power Amplifier ......................

39

Connecting an RI Dock ................................

40

Connecting the Power Cords of Other

 

Components (North American model only) ...

40

Connecting

Components .......................

41

Connecting the RS232 Port..........................

41

Connecting the Power Cord .........................

41

Turning On the AV Receiver .....................

42

Turning On and Standby ..............................

42

First Time Setup

 

First Time Setup.........................................

43

Using the Onscreen Setup Menus ...............

43

Speaker Settings..........................................

44

HDMI Monitor Setup.....................................

45

Video Input Setup.........................................

46

Changing the Input Display ..........................

48

Digital Input Setup ........................................

49

TV Format Setup

 

(not North American model).......................

50

AM Frequency Step Setup

 

(Australian model)......................................

51

Automatic Speaker Setup (Audyssey MultEQ

XT) .............................................................

 

52

Basic Operations

 

Basic Operations.......................................

57

Selecting the Input Source ...........................

57

Using the Multichannel DVD Input................

58

Adjusting the Bass & Treble .........................

58

Displaying Source Information......................

58

Setting the Display Brightness......................

59

Muting the AV receiver .................................

59

Using the Sleep Timer ..................................

59

Using Headphones .......................................

59

Listening to the Radio...............................

60

Using the Tuner ............................................

60

Listening to XM Satellite Radio® (North

 

American Models Only)..............................

61

Listening to SIRIUS Satellite Radio® (North

American Models Only)..............................

67

Presetting AM, FM, XM, and SIRIUS Stations.....

76

Using the Listening Modes.......................

77

Selecting Listening Modes............................

77

Listening Modes Available for Each Source

Format........................................................

78

About the Listening Modes ...........................

82

Recording...................................................

85

Advanced Operations

 

Advanced Operations ...............................

86

Using the Late Night Function (Dolby Digital,

Dolby Digital Plus, and Dolby TrueHD only)

..86

Using the Re-EQ Function............................

86

Adjusting Individual Speaker Levels.............

86

Advanced Setup ........................................

87

About the Onscreen Setup Menus ...............

87

Speaker Setup..............................................

88

Multichannel DVD Input Settings..................

95

Audio Adjust Functions.................................

96

Assigning Listening Modes to Input Sources ...

98

Source Setup................................................

99

Volume Setup/OSD Setup..........................

103

Changing the AV Receiver’s ID ..................

105

HDMI Setup ................................................

105

Network Setup ............................................

107

Lock Setup..................................................

107

Digital Input Signal Formats .......................

108

Changing the Remote Controller’s ID.........

108

Zone 2.......................................................

109

Connecting Zone 2 .....................................

109

Setting the Powered Zone 2 .......................

110

Setting the Zone 2 Out ...............................

111

Using Zone 2 ..............................................

112

Using the 12V Triggers in Zone 2 and the Main

Room........................................................

114

Using the Remote Controller in Zone 2 and

Multiroom Control Kits..............................

115

Controlling Other Components..............

116

Entering Remote Control Codes.................

116

Remote Control Codes for Integra/Onkyo

 

Components Connected via ..............

117

Resetting Remote Mode Buttons................

117

Resetting the Remote Controller ................

117

Learning Commands ..................................

119

Using Macros..............................................

120

Others

 

Specifications ..........................................

121

Troubleshooting ......................................

122

5

DTR-6.8_En.book Page 6 Wednesday, June 20, 2007 4:16 PM

Features

Amplification

100 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz with a maximum total harmonic distortion of 0.08 % (FTC rating)

WRAT-Wide Range Amplifier Technology (5 Hz-100 kHz bandwidth)

Optimum Gain Volume Circuitry

Processing

THX Select2*1 Certified

HDMI Video Upconversion with TBC

Dolby*2 Digital Plus, Dolby TrueHD

DTS*3-HD High Resolution Audio, DTS-HD Master Audio

Faroudja DCDi Edge Enhancement

Neural THX Surround*4 Decoder

Non-Scaling Configuration

A-Form Listening Mode Memory

Direct Mode

192 kHz/24-bit D/A Converters

Powerful and Highly Accurate 32-bit DSP Processing x 3

Connections

*2.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

*3.

“DTS” is a registered trademark of DTS, Inc. and “DTS-HD Master Audio” is a trademark of DTS, Inc.

“DTS” and “DTS-ES | Neo: 6” are registered trademarks of DTS, Inc. “96/24” is a trademark of DTS, Inc.

*4.

Neural Surround is a trademark owned by Neural Audio Corporation, THX is a trademark of THX Ltd., which may be registered in some jurisdictions. All rights reserved.

*5.

HDMI, the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.

*6.

©2005 SIRIUS Satellite Radio Inc. “SIRIUS,” SiriusConnect, the SIRIUS dog logo, channel names and logos are trademarks of SIRIUS Satellite Radio Inc. Available only in the contiguous United States (excluding Alaska and Hawaii) and Canada.

3 HDMI*5 Inputs and 1 Output (ver. 1.3a)

6 Digital Inputs (3 Optical / 3 Coaxial) / 1 Output (Optical)

5 S-Video Inputs / 2 Outputs

Color-Coded Banana Plug-Compatible Speaker Posts

Color-Coded 7.1 Multichannel Inputs and Pre Outs

Powered Zone 2

IR Input and 12 V Trigger

RS232 Port for Interface Control

Bi-Amp Connectable for FL/FR with SBL/SBR

Miscellaneous

SIRIUS Ready*6 / XM Ready*7 with XMHD Surround (North American model only)

40 SIRIUS/XM/AM/FM Presets (North American model)

40 AM/FM Presets (Australian model)

Audyssey MultEQ XT*8 to Correct Room Acoustic Problems

Crossover Adjustment (40/45/50/55/60/70/80/90/100/110/120/130/150/200 Hz)

A/V Sync Control Function (up to 250 ms)

New Graphic On-Screen Display

Compatible with RI Dock for iPod

Aluminum Front Panel

Backlit/Preprogrammed RI-Compatible Remote with 3 Macros and Mode-Key LEDs

*1.

THX and Select2 are trademarks of THX Ltd. THX may be registered in some jurisdictions. All rights reserved. Surround EX is a trademark of Dolby Laboratories. Used with permission.

6

*7.

XM Ready® is a registered trademark of XM Satellite Radio Inc. ©2005 XM Satellite Radio Inc. All rights reserved.

*8.

Manufactured under license from Audyssey Laboratories. U.S. and foreign patents pending. Audyssey MultEQ® XT is a trademark of Audyssey Laboratories.

THX Select2

Before any home theater component can be THX Select2 certified, it must pass a rigorous series of quality and performance tests. Only then can a product feature the THX Select2 logo, which is your guarantee that the Home Theater products you purchase will give you superb performance for many years to come. THX Select2 requirements define hundreds of parameters, including power amplifier performance, and pre-amplifier performance and operation for both digital and analog domains. THX Select2 receivers also feature proprietary THX technologies (e.g., THX Mode) which accurately translate movie soundtracks for home theater playback.

*“Xantech” is a registered trademark of Xantech Corporation.

*“Niles” is a registered trademark of Niles Audio Corporation.

*Apple and iPod are trademarks of Apple, Inc., registered in the U.S. and other countries.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited consumer uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Integra DTR-6.8 User Manual

DTR-6.8_En.book Page 7 Wednesday, June 20, 2007 4:16 PM

Front & Rear Panels

Front Panel

North American model

1 2 3 4

5 6 7 8 9 bkbl bm bn bo bp

bq br bs

bt

ck

cl

cm

Australian model

2 cn3

The page numbers in parentheses show where you can find the main explanation for each item.

1 Standby/On button (42)

5 Stereo button (77)

This button is used to set the AV receiver to Standby or On.

2Standby indicator (42)

This indicator lights up when the AV receiver is in Standby mode, and it flashes while a signal is being received from the remote controller.

3Zone 2 indicator (112)

This indicator lights up when Zone 2 is selected.

4Remote control sensor (12)

This sensor receives control signals from the remote controller.

This button is used to select the Stereo listening mode.

6Listening Mode [] [] buttons (77)

These buttons are used to select the listening modes.

7Display

See “Display” on page 9.

8Dimmer button (59)

This button is used to adjust the display brightness.

7

DTR-6.8_En.book Page 8 Wednesday, June 20, 2007 4:16 PM

Front & Rear Panels—Continued

9Memory button (76)

This button is used when storing or deleting radio presets.

bk Tuning Mode button (60)

This button is used to select the Auto or Manual tuning mode.

bl Display button (58)

This button is used to display various information about the currently selected input source.

bm Setup button

This button is used to access the onscreen setup menus that appear on the connected TV.

bn Arrow/Tuning/Preset & Enter buttons

cm AUX Input

This input can be used to connect a camcorder, game console, and so on. There are jacks for optical digital audio, S-Video, composite video, and analog audio.

cn Ready indicator (106) (not North American model)

Enters Ready mode and lights up when the HDMI Power Control is set to Enable and the AV receiver is on Standby.

When the AM or FM input source is selected, the Tuning [] [] buttons are used to tune the tuner, and the Preset [] [] buttons are used to select radio presets (see page 76). When the onscreen setup menus are used, they work as arrow buttons and are used to select and set items. The [Enter] button is also used with the onscreen setup menus.

bo Return button

This button is used to return to the previously displayed onscreen setup menu.

bp Master Volume control (57)

This control is used to adjust the volume of the AV receiver to –∞ dB, –81 dB through +18 dB (relative display).

bq Zone 2/Off buttons (112)

The Zone 2 button is used to select the input source for Zone 2.

The Off button is used to turn off the output of

Zone 2.

br Phones jack (59)

This 1/4-inch phone jack is for connecting a standard pair of stereo headphones for private listening.

bs Zone 2 Level button (113)

This button is used to set the volume for Zone 2.

bt Tone, [–] & [+] buttons (58)

These buttons are used to adjust the bass and treble.

ck Input selector buttons (57)

These buttons are used to select from the following input sources: Multi CH, DVD, VCR/DVR, CBL/SAT, Game/TV, AUX, Tape, Tuner, CD, Phono.

The [Multi CH] button selects the DVD analog multichannel input.

cl Setup Mic jack (52)

The included speaker setup microphone is connected here for automatic speaker setup.

8

DTR-6.8_En.book Page 9 Wednesday, June 20, 2007 4:16 PM

Front & Rear Panels—Continued

Display

1 2

3

4

5

6 7

The page numbers in parentheses show where you can find the main explanation for each item.

1 SLEEP indicator (59)

5 Tuning indicators

This indicator lights up when the Sleep function has been set.

2MUTING indicator (59)

This indicator flashes or lights up while the AV receiver is muted.

3HDMI indicator

This indicator lights up when the HDMI audio signal input is used.

4Listening mode & format indicators

These indicators show the currently selected listening mode and the format of digital input signals.

FM STEREO (60): This indicator lights up when the AV receiver is tuned to a stereo FM station.

AUTO (60): This indicator lights up when the Auto Tuning mode is selected, and disappears when the Manual Tuning mode is selected.

TUNED (60): This indicator lights up when the AV receiver is tuned into a radio station.

6Message area

This area of the display shows various information about the currently selected source.

7Audyssey indicator (52)

This indicator flashes during automatic speaker setup and stays on when the setup is complete. It also lights up when the Equalizer Settings are set to Audyssey.

9

DTR-6.8_En.book Page 10 Wednesday, June 20, 2007 4:16 PM

Front & Rear Panels—Continued

Rear Panel

North American model

(North American model only)

 

 

3 4

 

 

 

 

 

 

 

1

2

5

6

78 9 bkblbm

bn

bo

 

bp

bqbrbsbt ck cl cm

cn co

cp

cq

 

 

cr

cs

The page numbers in parentheses show where you can find the main explanation for each item.

1DIGITAL OPTICAL IN 1, 2 and OUT

These optical digital audio inputs are for connecting components with optical digital audio outputs, such as CD and DVD players.

The optical digital audio output is for connecting a digital recorder with an optical digital input, such as a CD recorder.

2DIGITAL COAXIAL IN 1, 2 and 3

These coaxial digital audio inputs are for connecting components with coaxial digital audio outputs, such as CD and DVD players.

3SIRIUS antenna (North American model only) (67)

This jack is for connecting a SIRIUS Satellite Radio antenna.

4XM antenna (North American model only) (61)

This jack is for connecting an XM Minituner and Home Dock, sold separately.

5HDMI IN 1, 2, 3, and OUT

HDMI (High Definition Multimedia Interface) connections carry digital audio and digital video.

The HDMI inputs are for connecting components with HDMI outputs, such as DVD players.

The HDMI output is for connecting a TV or projector with an HDMI input.

6AM ANTENNA (23)

These push terminals are for connecting an AM antenna.

7FM ANTENNA (23)

This jack is for connecting an FM antenna.

8MONITOR OUT

The S-Video or composite video jack should be connected to a video input on your TV or projector.

9IR IN A/B and OUT

A commercially available IR receiver can be connected to the IR IN A or B jack, allowing you to control the AV receiver while you’re in Zone 2, or control it when it’s out of sight, for example, installed in a cabinet.

A commercially available IR emitter can be connected to the IR OUT jack to pass IR (infrared) remote control signals along to other components.

bk 12V TRIGGER OUT (A/B/C)

This outputs can be connected to the 12-volt trigger inputs on other components.

bl FRONT, CENTER, SURR & SURR BACK

SPEAKERS (21)

These terminal posts are for connecting your front, center, surround, and surround back speakers.

bm RS232

This port is for connecting the AV receiver to home automation equipment and external controllers.

bn ZONE 2 LINE OUT (109)

This analog audio output can be connected to a line input on an integrated amplifier in Zone 2.

bo ZONE 2 SPEAKERS (109)

These terminals are for connecting speakers in Zone 2.

10

DTR-6.8_En.book Page 11 Wednesday, June 20, 2007 4:16 PM

Front & Rear Panels—Continued

bp AC INLET

The supplied power cord is connected here. The other end of the power cord should be connected to a suitable wall outlet.

bq PHONO IN

This audio input is for connecting a turntable.

br REMOTE CONTROL

This (Remote Interactive) jack can be connected to an jack on another -capable Integra/Onkyo component. The AV receiver’s remote controller can then be used to control that component. To use , you must make an analog audio connection (RCA) between the AV receiver and the other AV component, even if they are connected digitally.

bs COMPONENT VIDEO IN 1, 2, 3, and OUT

These component video inputs can be used to connect AV components with component video outputs, such as DVD players.

This component video output can be used to connect a TV or projector with a component video input.

bt GND screw

cq PRE OUT: FRONT L/R, CENTER,

SUBWOOFER, SURR L/R, and SURR BACK L/R (20)

This 5.1/7.1 multichannel analog audio output can be connected to the analog audio input on a multichannel power amplifier for when you want to use the AV receiver solely as a preamplifier. The SUBWOOFER jack is for connecting a powered subwoofer.

cr ETHERNET

This port is for connecting the AV receiver to home automation equipment and external controllers.

cs AC OUTLET (North American model only)

These switched AC outlets can be used to supply power to other AV components. The type and number of outlets depends on the country in which you purchased your AV receiver.

See pages 19-41 for connection information.

This screw is for connecting a turntable’s ground wire.

ck CD IN

This analog audio input is for connecting a CD player’s analog audio output.

cl TAPE IN/OUT

This analog audio input and output are for connecting a recorder with an analog audio input and output (cassette, Mini Disc, etc.).

cm GAME/TV IN

Here you can connect a game console, TV, etc. Input jacks include S-Video, composite video, and analog audio.

cn CBL/SAT IN

Here you can connect a cable/satellite receiver, settop box, etc. Input jacks include S-Video, composite video, and analog audio.

co VCR/DVR IN/OUT

Here you can connect a VCR or DVR (digital video recorder). Input and output jacks include S-Video, composite video, and analog audio.

cp DVD IN

Here you can connect a DVD player. Input jacks include S-Video, composite video, and analog audio. You can connect a DVD player’s 2-channel analog audio output or 7.1-channel analog audio output.

11

DTR-6.8_En.book Page 12 Wednesday, June 20, 2007 4:16 PM

Remote Controller

Installing the Batteries

1 To open the battery compartment, press the small hollow and slide off the cover.

2 Insert the three supplied batteries (AA/R6) in accordance with the polarity diagram inside the battery compartment.

3 Put the cover onto the remote controller and slide it shut.

Notes:

If the remote controller doesn’t work reliably, try replacing the batteries.

Don’t mix new and old batteries or different types of batteries.

If you intend not to use the remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.

Expired batteries should be removed as soon as possible to prevent damage from leakage or corrosion.

Aiming the Remote Controller

To use the remote controller, point it at the AV receiver’s remote control sensor, as shown below.

Remote control sensor

AV receiver

Standby indicator

Approx. 16 ft. (5 m)

Notes:

The remote controller may not work reliably if the AV receiver is subjected to bright light, such as direct sunlight or inverter-type fluorescent lights. Keep this in mind when installing.

If another remote controller of the same type is used in the same room, or the AV receiver is installed close to equipment that uses infrared rays, the remote controller may not work reliably.

Don’t put anything, such as a book, on the remote controller, because the buttons may be pressed inadvertently, thereby draining the batteries.

The remote controller may not work reliably if the AV receiver is installed in a rack behind colored glass doors. Keep this in mind when installing.

The remote controller will not work if there’s an obstacle between it and the AV receiver’s remote control sensor.

12

DTR-6.8_En.book Page 13 Wednesday, June 20, 2007 4:16 PM

Remote Controller—Continued

About the Remote Controller Modes

As well as the AV receiver, you can also use the remote controller to control your other AV components. The remote controller has a specific operating mode for use with each type of component. Modes are selected by using the Remote Mode buttons.

Receiver/Tape Mode

In Receiver/Tape mode, you can control the AV receiver and an Onkyo cassette recorder connected via .

DVD Mode

By default, you can control an Integra/Onkyo DVD player in this mode. By entering the appropriate remote control code, you can control components made by other manufacturers (see page 116).

CD/CDR/MD Mode

By default, you can control an Integra/Onkyo CD player in this mode. By entering the appropriate remote control code, you can control a CD player, MD recorder, or CD recorder made by another manufacturer (see page 116).

Dock Mode

This mode is for controlling an Apple iPod in an Onkyo RI Dock.

By default, you can control an RI Dock that has a remote control sensor such as DS-A2. When operating an RI Dock with an connection, you can control it by entering the appropriate remote control code (see page 116).

TV and VCR Modes

With these modes, you can control a TV and VCR. You must enter the appropriate remote control code first (see page 116).

Cable/SAT Mode

In Cable/SAT mode, you can control a cable or satellite TV receiver. You must enter the appropriate remote control code first (see page 116).

Zone 2 Mode

This mode is for controlling Zone 2 (see page 112).

1

Use the Remote Mode buttons to select a

 

mode.

 

 

2

Use the buttons supported by that mode

 

to control the component.

Receiver/Tape mode: see right column DVD mode: see page 15

CD/MD/CDR mode: see page 16 Dock mode: see page 17 TV, VCR, Cable/SAT modes: see page 118

Note:

Some of the remote controller functions described in this manual may not work as expected with other components.

Receiver/Tape Mode

Receiver/Tape mode is used to control the AV receiver. It can also be used to control an Onkyo cassette recorder connected via .

To set the remote controller to Receiver/Tape mode, press the [Receiver] Remote Mode button.

1

 

2

bm

 

3

 

 

bn

4

 

 

bo

5

bp

6

 

7

bq

8

br

9

bs

1

 

bk

 

bl

 

 

bt

 

ck

13

DTR-6.8_En.book Page 14 Wednesday, June 20, 2007 4:16 PM

Remote Controller—Continued

For detailed information, see the pages in parentheses.

1Standby button (42)

Sets the AV receiver to Standby.

2On button (42)

Turns on the AV receiver.

3Input Selector buttons (57)

Used to select the input source.

4Macro buttons (120)

Used with the Macro function.

5Dimmer button (59)

Adjusts the display brightness.

6Arrow []/[]/[]/[] and Enter buttons

Used to select and adjust settings.

7CH +/– button (76)

Selects radio presets.

8Setup button

Used to change settings.

9Display button (58)

Displays information about the current input source.

bk Listening Mode buttons (77)

Used to select the listening modes. The [Stereo], [Surround], and Listening Mode []/[] buttons can be used at any time, regardless of the currently selected remote controller mode.

bl Test Tone, CH Sel, Level–, and Level+ buttons (86, 92)

Used to adjust the level of each speaker.

bm Light button

ck L Night button (86)

Turns the Late Night function on or off.

TAPE mode

On twin cassette decks, only Deck B can be controlled.

1Previous and Next []/[] buttons

The Previous [] button selects the previous track. During playback it selects the beginning of the current track. The Next [] button selects the next track.

Depending on how they were recorded, the Previous and Next []/[] buttons may not work properly with some cassette tapes.

Play [] button

Starts playback.

Rewind and Fast Forward []/[] buttons

The Rewind [] button starts rewind. The Fast Forward [] button starts fast forward.

Reverse Play [] button

Starts reverse playback.

Stop [] button

Stops playback.

Rec [] button

Starts recording.

Turns the remote controller’s illuminated buttons on or off.

bn D.TUN button (60)

Selects the Direct tuning mode for radio.

bo Remote Mode buttons (13)

Used to select the remote controller modes. When you press a button, the Remote Mode button for the currently selected mode lights up.

bp Sleep button (59)

Used with the Sleep function.

bq VOL []/[] button (57)

Adjusts the volume of the AV receiver regardless of the currently selected remote controller mode.

br Return button

Returns to the previous display when changing settings.

bs Muting button (59)

Mutes or unmutes the AV receiver.

bt Re-EQ button (86)

Turns the Re-EQ function on or off.

14

DTR-6.8_En.book Page 15 Wednesday, June 20, 2007 4:16 PM

Remote Controller—Continued

DVD Mode

1 Standby button

 

Sets the DVD player to Standby.

To set the remote controller to DVD mode, press the

2 On button

[DVD] Remote Mode button.

Turns on the DVD player.

 

 

 

3

 

 

4

1

 

 

2

 

5

 

 

 

 

6

3

 

 

 

 

7

 

bn

8

 

 

9

4

bo

 

 

 

5

 

 

6

 

bk

 

 

7

bp

bl

 

 

8

 

 

9

 

bm

 

 

 

bq

bn

 

 

bk

br

bo

 

bl

bs

 

bm

 

bp

 

 

 

bt

bq

 

 

 

 

br

 

 

bs

 

 

bt

Number buttons

Used to enter title, chapter, and track numbers, and times for locating specific points.

Top Menu button

Selects a DVD’s top menu.

Arrow []/[]/[]/[] and Enter buttons

Used to navigate menus and select items.

Disc +/– button

Selects discs on a DVD changer.

Setup button

Used to access the DVD player’s settings.

Display button

Displays information about the current disc, title, chapter, or track, including elapsed time, remaining time, total time, and so on.

Playback buttons

From left to right: Previous, Play, Next, Rewind, Pause, Stop, Fast Forward, Slow Reverse, and Slow Forward.

Repeat button

Used with the repeat playback function.

Audio button

Selects foreign language soundtracks and audio formats (e.g., Dolby Digital or DTS).

Open/Close [] button

Opens and closes the disc tray.

Clear button

Cancels functions and clears entered numbers.

Menu button

Displays a DVD’s menu.

Return button

Exits the DVD player’s onscreen setup menu.

Random button

Used with the random playback function.

Play Mode button

Selects play modes on components with selectable play modes.

Subtitle button

Selects subtitles.

Video Off button

Turns off the internal video circuitry, eliminating any possibility of interference.

15

DTR-6.8_En.book Page 16 Wednesday, June 20, 2007 4:16 PM

Remote Controller—Continued

CD/MD/CDR Modes

To control an Integra/Onkyo CD player, MD recorder, or CD recorder, or a CD or MD player/recorder made by another manufacturer, press the [CD] Remote Mode button to select the CD/MD/CDR remote controller mode.

In order to control an Onkyo MD recorder or CD recorder, or a component made by another manufacturer, you must first enter the appropriate remote control code (see page 116).

1Standby button

Sets the component to Standby.

2On button

Set the component to On or Standby.

3Number buttons

Used to enter track numbers and times for locating specific points.

4Arrow []/[]/[]/[] and Enter buttons

Used with some components.

5Disc +/– button

Selects discs on a CD changer.

1

 

2

 

3

 

 

bl

4

 

5

 

 

bm

6

 

7

 

8

bn

9

bo

bk

 

6Display button

Displays information about the current disc or track, including elapsed time, remaining time, total time, and so on.

7Playback buttons

From left to right: Previous, Play, Next, Rewind, Pause, Stop, and Fast Forward.

8Rec [] button

Starts recording.

9Repeat button

Used with the repeat playback function.

bk Open/Close [] button

Opens or closes the disc tray or ejects the MiniDisc.

bl Clear button

Cancels functions and clears entered numbers.

bm Return button

Used with some components.

bn Random button

Used with the random playback function.

bo Play Mode button

Selects play modes on components with selectable play modes.

16

DTR-6.8_En.book Page 17 Wednesday, June 20, 2007 4:16 PM

Remote Controller—Continued

Dock Mode

Dock mode is for controlling an Apple iPod in an Onkyo RI Dock.

When Using an RI Dock:

Connect the RI Dock to the TAPE IN or GAME/TV IN L/R jacks.

Set the RI Dock’s RI MODE switch to HDD or HDD/DOCK.

Set the AV receiver’s Input Display to DOCK (see page 48).

When operating a DS-A1 RI Dock, enter the appropriate remote control code for the first time (see page 116).

See to the RI Dock’s instruction manual for more information.

To set the remote controller to DOCK mode, press the [DOCK] REMOTE MODE button.

1

 

2

 

3

 

4

bm

5

 

6

bn

7

bo

8

bp

9

bq

br

bk

 

bl

bs

1Standby button

Turns off the iPod.

2ON button*

Turns on the iPod.

3Top Menu button

Works as a Mode button when used with a DS-A2 RI Dock.

4Arrow []/[] and Enter buttons*

Used to navigate menus and select items.

5Album +/– button*

Selects the next or previous album.

6Display button*

Turns on the backlight for 30 seconds.

7Previous [] button

Restarts the current song. Press it twice to select the previous song.

8Pause [ ] button

Pauses playback. (With 3rd generation iPods, it works as a Play/Pause button.)

9Rewind [] button

Press and hold to rewind.

bk Playlist [ ]/[ ] buttons*

Used to select the previous or next playlist on the iPod.

bl Repeat button*

Used with the repeat function.

bm Menu button*

Used to access menus.

bn Play [] button

Starts playback. If the component is off, it will turn on automatically. (With 3rd generation iPods, this button works as a Play/Pause button.)

bo Next [] button

Selects the next song.

bp Stop [] button

Stops playback and displays a menu.

bq Fast Forward [] button

Press and hold to fast forward.

br Random button*

Used with the shuffle function.

bs Play Mode button

Used to select play modes on components with selectable play modes.

Works as a Resume button when used with a DS-A2 RI Dock.

*Buttons marked with an asterisk (*) are not supported by 3rd generation iPods.

17

DTR-6.8_En.book Page 18 Wednesday, June 20, 2007 4:16 PM

About Home Theater

Enjoying Home Theater

Thanks to the AV receiver’s superb capabilities, you can enjoy surround sound with a real sense of movement in your own home—just like being in a movie theater or concert hall. With DVDs you can enjoy DTS and Dolby Digital. With analog and digital TV you can enjoy Dolby Pro Logic IIx or Onkyo’s own DSP surround listening modes.

You can also enjoy THX Surround EX (THX-certified THX speaker system recommended).

Front left and right speakers

Surround back left and right

speakers

These output the overall sound. Their role in a home theater is to provide a solid anchor for the sound image. They should be positioned facing the listener at about ear level, and equidistant from the TV. Angle them inward so as to create a triangle, with the listener at the apex.

Center speaker

 

This speaker enhances the

 

front left and right speakers,

 

making sound movements dis-

 

tinct and providing a full sound

 

image. In movies it’s used

 

mainly for dialog.

 

Position it close to your TV fac-

 

ing forward at about ear level, or

 

at the same height as the front

Corner

left and right speakers.

These speakers are necessary to enjoy Dolby Digital EX, DTS-ES Matrix, DTS-ES Discrete, THX Surround EX, etc. They enhance the realism of surround sound and improve sound localization behind the listener. Position them behind the listener about 2–3 feet (60– 100 cm) above ear level.

Subwoofer

The subwoofer handles the bass sounds of the LFE (Low-Frequency Effects) channel. The volume and quality of the bass output from your subwoofer will depend on its position, the shape of your listening room, and your listening position. In general, a good bass sound can be obtained by installing the subwoofer in a front corner, or at one-third the width of the wall, as shown.

Tip: To find the best position for your subwoofer, while playing a movie or some music with good bass, experiment by placing your subwoofer at various positions within the room, and choose the one that provides the most satisfying results.

1/3 wall length

Surround left and right speakers

These speakers are used for precise sound positioning and to add realistic ambience.

Position them at the sides of the listener, or slightly behind, about 2–3 feet (60–100 cm) above ear level. Ideally they should be equidistant from the listener.

18

DTR-6.8_En.book Page 19 Wednesday, June 20, 2007 4:16 PM

Connecting the AV Receiver

About AV Connections

Before making any AV connections, read the manuals supplied with your other AV components.

Don’t connect the power cord until you’ve completed and double-checked all AV connections.

Optical Digital Jacks

The AV receiver’s optical digital jacks have shutter-type covers that open when an optical plug is inserted and close when it’s removed. Push plugs in all the way.

Caution: To prevent shutter damage, hold the optical plug straight when inserting and removing.

AV Cables & Jacks

AV Connection Color Coding

RCA-type AV connections are usually color-coded: red, white, and yellow. Use red plugs to connect rightchannel audio inputs and outputs (typically labeled “R”). Use white plugs to connect left-channel audio inputs and outputs (typically labeled “L”). And use yellow plugs to connect composite video inputs and outputs.

Left (white) Analog audio

Right (red)

Composite video

(Yellow)

Push plugs in all the way to make good connections (loose connections can cause noise or malfunctions).

To prevent interference, keep audio and video cables away from power cords and speaker cables.

Left (white) Right (red) (Yellow)

Right!

Wrong!

Video

Cable

Jack

Description

HDMI connections can carry uncompressed stan-

HDMI

HDMI dardor high-definition digital video and audio and offer the best picture and sound quality.

 

Component video separates the luminance (Y) and

Component

color difference signals (PR, PB), providing the best

picture quality (some TV manufacturers label their

video cable

 

component video sockets slightly differently).

S-Video cable

S-Video separates the luminance and color signals and

provides better picture quality than composite video.

 

Composite video is commonly used on TVs, VCRs,

Composite V and other video equipment. Use only dedicated

video cable

composite video cables.

Audio

Cable

Jack

Description

Optical digital

 

 

 

 

 

 

 

 

Offers the best sound quality and allows you to

 

 

 

 

 

 

 

 

enjoy surround sound (e.g., Dolby Digital, DTS).

audio cable

 

 

 

 

 

 

 

 

The audio quality is the same as for coaxial.

 

 

 

 

 

 

 

 

 

Offers the best sound quality and allows you to

Coaxial digital enjoy surround sound (e.g., Dolby Digital, DTS).

audio cable

The audio quality is the same as for optical.

Analog audio

L

This cable carries analog audio. It’s the most

common connection format for analog audio, and

 

cable (RCA)

 

R

can be found on virtually all AV components.

 

 

 

 

 

This cable carries multichannel analog audio and

 

 

it’s typically used to connect DVD players with a

Multichannel

 

7.1-channel analog audio output. Several standard

analog audio

 

analog audio cables can be used instead of a multi-

cable (RCA)

 

 

channel cable.

 

 

Note: The AV receiver does not support SCART plugs.

19

DTR-6.8_En.book Page 20 Wednesday, June 20, 2007 4:16 PM

Connecting the AV Receiver—Continued

Connecting Your Speakers

Speaker Configuration

For the best surround sound experience, you should connect seven speakers and a powered subwoofer.

The following table indicates the channels you should use depending on the number of speakers that you have.

Number of speakers:

2

3

4

5

6

7

 

 

 

 

 

 

 

Front left

 

 

 

 

 

 

 

 

 

 

 

 

 

Front right

 

 

 

 

 

 

 

 

 

 

 

 

 

Center

 

 

 

 

 

 

 

 

 

 

 

 

 

Surround left

 

 

 

 

 

 

 

 

 

 

 

 

 

Surround right

 

 

 

 

 

 

 

 

 

 

 

 

 

Surround back*

 

 

 

 

 

 

 

 

 

 

 

 

 

Surround back left

 

 

 

 

 

 

 

 

 

 

 

 

 

Surround back right

 

 

 

 

 

 

 

 

 

 

 

 

 

*If you’re using only one surround back speaker, connect it to the left (L) SURR BACK SPEAKERS terminals.

No matter how many speakers you use, a powered subwoofer is recommended for a really powerful and solid bass.

To get the best from your surround sound system, you need to set the speaker settings by using the supplied speaker setup microphone (see page 52).

Using Dipole Speakers

You can use dipole speakers for the surround left and right and surround back left and right speakers. Dipole speakers output the same sound in two directions. Dipole speakers typically have an arrow printed on them to indicate how they should be positioned. The surround left and right dipole speakers should be positioned so that their arrows point toward the TV/screen, while the surround back left and right dipole speakers should be positioned so that their arrows point toward each other, as shown.

Dipole speakers

 

Normal speakers

 

 

 

 

1

 

 

 

1

 

TV/screen

 

 

TV/screen

 

2

3

4

2

3

4

5

6

5

6

 

 

7

 

8

 

 

7

 

8

 

1. Subwoofer

 

 

6. Surround right speaker

2. Front left speaker

7. Surround back left

3. Center speaker

 

 

speaker

 

 

4. Front right speaker

8. Surround back right

5. Surround left speaker

speaker

 

 

Connecting a Powered Subwoofer

Using a suitable cable, connect the AV receiver’s PRE OUT SUBWOOFER to an input on your powered subwoofer, as shown. If your subwoofer is unpowered and you’re using an external amplifier, connect the PRE OUT SUBWOOFER to an input on the amp.

Powered subwoofer

LINE INPUT

Attaching the Speaker Labels

The AV receiver’s positive (+) speaker terminals are color-coded for ease of identification (the negative (–) speaker terminals are all black).

Speaker terminal

Color

 

 

Front left, Zone 2 left

White

 

 

Front right, Zone 2 right

Red

 

 

Center

Green

 

 

Surround left

Blue

 

 

Surround right

Gray

 

 

Surround back left

Brown

 

 

Surround back right

Tan

 

 

The supplied speaker cable labels are also color-coded and you should attach them to the positive (+) side of each speaker cable in accordance with the above table. Then all you need to do is to match the color of each label to the corresponding speaker terminal.

Using the Speaker Terminal Tool

The supplied speaker terminal tool makes it easy to tighten and loosen the speaker terminals. If you are using banana plugs, to ensure optimum sound quality, tighten the speaker terminal before inserting the banana plug. (In Europe, using banana plugs to connect speakers to an audio amplifier is prohibited.)

20

DTR-6.8_En.book Page 21 Wednesday, June 20, 2007 4:16 PM

Connecting the AV Receiver—Continued

Speaker Connection Precautions

Read the following before connecting your speakers:

North American models: Only connect speakers with an impedance of 6 ohms or higher. If you use speakers with a lower impedance, and use the amplifier at high volume levels for a long period of time, the built-in protection circuit may be activated.

Other models: You can connect speakers with an impedance of between 4 and 16 ohms. If the impedance of any of the connected speakers is 4 ohms or more, but less than 6 ohms, be sure to set the minimum speaker impedance to “4 ohms” (see page 44). If you use speakers with a lower impedance, and use the amplifier at high volume levels for a long period of time, the built-in protection circuit may be activated.

Disconnect the power cord from the wall outlet before making any connections.

Read the instructions supplied with your speakers.

Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals only to positive

(+) terminals, and negative (–) terminals only to negative (–) terminals. If you get them the wrong way around, the sound will be out of phase and will sound unnatural.

Unnecessarily long, or very thin speaker cables may affect the sound quality and should be avoided.

If you use 4 or 5 speakers, connect each of the two surround speakers to the SURR SPEAKERS terminals. Do not connect them to the SURR BACK SPEAKERS terminals.

Be careful not to short the positive and negative wires. Doing so may damage the AV receiver.

• Make sure the metal core of the wire does not have contact with the AV receiver’s rear panel.

Doing so may damage the AV receiver.

Don’t connect more than one cable to each speaker terminal. Doing so may damage the AV receiver.

Don’t connect one speaker to several terminals.

Connecting the Speaker Cables

1

Strip about 5/8" (15 mm)

5/8" 15 mm

 

of insulation from the

 

 

ends of the speaker

 

 

cables, and twist the bare

 

 

wires tightly, as shown.

 

2

Unscrew the terminal.

 

3

Fully insert the bare

 

 

wires.

 

4

Screw the terminal tight.

 

The following illustration shows which speaker should be connected to each pair of terminals.

If you’re using only one surround back speaker, connect it to the left (L) SURR BACK SPEAKERS terminals.

Surround

Surround

Surround

Surround

 

 

 

 

 

 

 

 

 

 

 

 

back left

back right

left

right

 

 

 

 

 

 

 

 

 

 

 

 

speaker

speaker

speaker

speaker

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Front right

Front left

Center

 

 

 

 

 

 

 

 

 

 

speaker

speaker

speaker

21

DTR-6.8_En.book Page 22 Wednesday, June 20, 2007 4:16 PM

Connecting the AV Receiver—Continued

Bi-amping the Front Speakers

The FRONT SPEAKERS L/R and SURR BACK SPEAKERS L/R terminal posts can be used with front speakers and surround back speakers respectively, or biamped to provide separate tweeter and woofer feeds for a pair of front speakers that support bi-amping, providing improved bass and treble performance.

When bi-amping is used, the AV receiver is able to drive up to 5.1 speakers in the main room.

For bi-amping, the FRONT SPEAKERS L/R terminal posts connect to the front speakers’ tweeter terminals. And the SURR BACK SPEAKERS L/R terminal posts connect to the front speakers’ woofer terminals.

Once you’ve completed the bi-amping connections shown below and turned on the AV receiver, you must set the Speakers Type setting to Bi-Amp to enable biamping (see page 44).

Important:

When making the bi-amping connections, be sure to remove the jumper bars that link the speakers’ tweeter (high) and woofer (low) terminals.

Bi-amping Speaker Hookup

1

Connect the AV receiver’s FRONT SPEAKERS

 

R positive (+) terminal to the right speaker’s pos-

 

itive (+) tweeter (high) terminal. And connect the

 

AV receiver’s FRONT SPEAKERS R negative (–

 

) terminal to the right speaker’s negative (–)

 

tweeter (high) terminal.

 

 

2

Connect the AV receiver’s SURR BACK

 

SPEAKERS R positive (+) terminal to the right

 

speaker’s positive (+) woofer (low) terminal. And

 

connect the AV receiver’s SURR BACK

 

SPEAKERS R negative (–) terminal to the right

 

speaker’s negative (–) woofer (low) terminal.

 

 

3

Connect the AV receiver’s FRONT SPEAKERS L

 

positive (+) terminal to the left speaker’s positive

 

(+) tweeter (high) terminal. And connect the AV

 

receiver’s FRONT SPEAKERS L negative (–) ter-

 

minal to the left speaker’s negative (–) tweeter

 

(high) terminal.

 

 

4

Connect the AV receiver’s SURR BACK

 

SPEAKERS L positive (+) terminal to the left

speaker’s positive (+) woofer (low) terminal. And connect the AV receiver’s SURR BACK SPEAKERS L negative (–) terminal to the left speaker’s negative (–) woofer (low) terminal.

 

Low range

 

(Woofer)

 

High range

 

(Tweeter)

Right speaker

Left speaker

22

DTR-6.8_En.book Page 23 Wednesday, June 20, 2007 4:16 PM

Connecting the AV Receiver—Continued

Connecting Antenna

This section explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas. The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner.

AM antenna push terminals

FM antenna connector

Connecting the Indoor FM Antenna

The supplied indoor FM antenna is for indoor use only.

1 Attach the FM antenna, as shown.

North American models

FM 75

Insert the plug fully into the jack.

Other models

FM 75

Insert the plug fully into the jack.

Once your AV receiver is ready for use, you’ll need to tune into an FM radio station and adjust the position of the FM antenna to achieve the best possible reception.

2 Use thumbtacks or something similar to fix the FM antenna into position.

Thumbtacks, etc.

If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead (see page 24).

Connecting the AM Loop Antenna

The supplied indoor AM loop antenna is for indoor use only.

1 Assemble the AM loop antenna, inserting the tabs into the base, as shown.

2 Connect both wires of the AM loop antenna to the AM antenna push terminals, as shown.

(The antenna’s wires are not polarity sensitive, so they can be connected either way around.) Make sure that the wires are attached securely and that the push terminals are gripping the bare wires, not the insulation.

Push

Insert wire

Release

Once your AV receiver is ready for use, you’ll need to tune into an AM radio station and adjust the position of the AM antenna to achieve the best possible reception.

Keep the antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords.

If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commercially available outdoor AM antenna (see page 24).

Caution: Be careful that you don’t injure yourself when using thumbtacks.

23

DTR-6.8_En.book Page 24 Wednesday, June 20, 2007 4:16 PM

Connecting the AV Receiver—Continued

Connecting an Outdoor FM Antenna

If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.

FM 75

Connecting an Outdoor AM Antenna

If good reception cannot be achieved using the supplied AM loop antenna, an outdoor AM antenna can be used in addition to the loop antenna, as shown.

Outdoor antenna

Insulated antenna cable

AM loop antenna

Notes:

Outdoor FM antennas work best outside, but usable results can sometimes be obtained when installed in an attic or loft.

For best results, install the outdoor FM antenna well away from tall buildings, preferably with a clear line of sight to your local FM transmitter.

Outdoor antenna should be located away from possible noise sources, such as neon signs, busy roads, etc.

For safety reasons, outdoor antenna should be situated well away from power lines and other high-voltage equipment.

Outdoor antenna must be grounded in accordance with local regulations to prevent electrical shock hazards.

Using a TV/FM Antenna Splitter

It’s best not to use the same antenna for both FM and TV reception, as this can cause interference problems. If circumstances demand it, use a TV/FM antenna splitter, as shown.

Outdoor AM antennas work best when installed outside horizontally, but good results can sometimes be obtained indoors by mounting horizontally above a window. Note that the AM loop antenna should be left connected.

Outdoor antenna must be grounded in accordance with local regulations to prevent electrical shock hazards.

TV/FM antenna splitter

To AV receiver

To TV (or VCR)

24

DTR-6.8_En.book Page 25 Wednesday, June 20, 2007 4:16 PM

Connecting the AV Receiver—Continued

Connecting Both Audio & Video

By connecting both the audio and video outputs of your DVD player and other AV components to the AV receiver, you can select both the audio and video simultaneously simply by selecting the appropriate input source on the AV receiver.

: Signal Flow

Video

Video

 

Audio

Audio

 

TV, projector,

 

etc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD player, etc.

Speakers (see page 21 for connection infor-

 

 

 

 

 

 

mation)

Which Connections Should I Use?

The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your other components. Use the following sections as a guide. For video components, you must make two connections—one for audio, one for video.

Video Connection Formats

Video equipment can be connected to the AV receiver by using any one of the following video connection formats: composite video, S-Video, component video, or HDMI, the latter offering the best picture quality.

The AV receiver can upconvert and downconvert between video formats, depending on the HDMI Monitor setting, which generally determines whether video signals are upconverted for the component video output or the HDMI output.

For optimal video performance, THX recommends that video signals pass through the system without upconversion (e.g., component video input through to component video output). It’s also recommended that you set the Immediate Display preference to Off (page 104).

HDMI Monitor Setting Set to Yes

With the HDMI Monitor setting set to Yes (see page 45), video input signals flow through the AV receiver as shown, with composite video, S-Video, and component video sources all being upconverted for the HDMI output. Use this setting if you connect the AV receiver’s HDMI OUT to your TV.

The composite video, S-Video, and component video outputs pass through their respective input signals as they are.

DVD player, etc.

 

Video Signal Flow Chart

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Composite

S-Video

Component

HDMI

IN

AV receiver

MONITOR OUT

Composite

S-Video

Component

HDMI

TV, projector, etc.

25

DTR-6.8_En.book Page 26 Wednesday, June 20, 2007 4:16 PM

Connecting the AV Receiver—Continued

HDMI Monitor Setting Set to No

With the HDMI Monitor setting set to No (see page 45), video input signals flow through the AV receiver as shown, with composite video and S-Video sources being upconverted for the component video output. Use this setting if you connect the AV receiver’s COMPONENT VIDEO OUT to your TV.

Composite video is upconverted to S-Video and S-Video is downconverted to composite video. Note that these conversions only apply to the MONITOR OUT V and S outputs, not the VCR/DVR OUT V and S outputs.

The composite video, S-Video, and component video outputs pass through their respective input signals as they are.

DVD player, etc.

 

Video Signal Flow Chart

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Composite

S-Video

Component

HDMI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV receiver

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MONITOR OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Composite

S-Video

Component

HDMI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV, projector, etc.

Audio Connection Formats

Audio equipment can be connected to the AV receiver by using any of the following audio connection formats: analog, optical, coaxial, analog multichannel, or HDMI.

When choosing a connection format, bear in mind that the AV receiver does not convert digital input signals for analog line outputs and vice versa. For example, audio signals connected to an optical or coaxial digital input are not output by the analog TAPE OUT.

DVD player, etc.

Audio Signal Flow Chart

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analog

Multichannel Optical Coaxial

HDMI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IN

 

 

 

 

 

AV receiver

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analog

 

Optical

HDMI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MD recorder, etc.

26

DTR-6.8_En.book Page 27 Wednesday, June 20, 2007 4:16 PM

Connecting the AV Receiver—Continued

Connecting a TV or Projector

Step 1: Video Connection

Choose a video connection that matches your TV ( A , B , or C ), and then make the connection.

Step 2: Audio Connection

Choose an audio connection that matches your TV ( a , b , or c ), and then make the connection.

With connection , you can listen to and record audio from your TV and listen in Zone 2.

To enjoy Dolby Digital and DTS, use connection b or c . (For recording, use a and b , or a and c .)

Connection

AV receiver

Signal flow

TV

Picture quality

 

A

 

COMPONENT VIDEO OUT

 

Component video input

Best

 

 

 

MONITOR OUT S

 

S-Video input

Better

 

 

 

 

 

 

 

 

 

 

 

C

 

MONITOR OUT V

 

Composite video input

Standard

 

 

 

GAME/TV IN L/R

 

Analog audio L/R output

 

 

 

 

 

 

 

 

 

 

 

 

 

b

 

DIGITAL COAXIAL IN 3 (CBL/SAT)

 

Digital coaxial output

 

 

 

 

DIGITAL OPTICAL IN 1 (GAME/TV)

 

Digital optical output

 

 

 

 

 

 

 

 

 

 

 

 

b

c

C

 

B

a

A

 

 

 

 

L

 

R

 

COAXIAL

OPTICAL

Y

PB

PR

AUDIO

S VIDEO

VIDEO

OUT

OUT

COMPONENT VIDEO IN

OUT

IN

IN

Connect one or the other

 

 

 

 

 

 

 

TV, projector,

 

 

Connection

 

must be assigned (see page 49)

 

 

 

 

b

 

 

 

 

 

 

etc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiver Hint! to the AV receiver and use its tuner to listen to TV programs through the AV receiver (see pages 30 and

32).

27

DTR-6.8_En.book Page 28 Wednesday, June 20, 2007 4:16 PM

Connecting the AV Receiver—Continued

Connecting a DVD Player

Step 1: Video Connection

Choose a video connection that matches your DVD player ( A , B , or C ), and then make the connection.

You must connect the AV receiver to your TV via the same type of connection.

Step 2: Audio Connection

Choose an audio connection that matches your DVD player ( a , b , or c ), and then make the connection.

With connection a , you can listen to and record audio from a DVD and listen in Zone 2.

To enjoy Dolby Digital and DTS, use connection or . (For recording, use and , or and .)

If your DVD player has main left and right outputs and multichannel left and right outputs, be sure to use the main left and right outputs for connection .

Connection

AV receiver

Signal flow

DVD player

Picture quality

 

A

 

COMPONENT VIDEO IN 1 (DVD)

 

Component video output

Best

 

 

 

DVD IN S

 

S-Video output

Better

 

B

 

 

 

 

 

 

 

 

C

 

DVD IN V

 

Composite video output

Standard

 

 

 

DVD IN FRONT L/R

 

Analog audio L/R output

 

 

a

 

 

 

 

 

 

 

 

 

b

 

DIGITAL COAXIAL IN 1 (DVD)

 

Digital coaxial output

 

 

 

 

DIGITAL OPTICAL IN 1 (GAME/TV)

 

Digital optical output

 

 

c

 

 

 

 

 

 

 

 

b

c

C

 

B

a

A

 

 

 

 

L

 

R

 

COAXIAL

OPTICAL

Y

PB

PR

AUDIO

S VIDEO

VIDEO

OUT

OUT

COMPONENT VIDEO OUT

OUT

OUT

OUT

Connect one or the other

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connection

 

must be assigned (see page 49)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

c

 

 

 

DVD player

 

 

 

 

 

 

To connect a DVD player or DVD-Audio/SACD-capable player with a multichannel analog audio output, see page 29.

28

DTR-6.8_En.book Page 29 Wednesday, June 20, 2007 4:16 PM

Connecting the AV Receiver—Continued

Hooking Up the Multichannel DVD Input

If your DVD player supports multichannel audio formats such as DVD-Audio or SACD, and it has a multichannel analog audio output, you can connect it to the AV receiver’s multichannel DVD input.

Use a multichannel analog audio cable, or several normal audio cables, to connect the AV receiver’s DVD FRONT L/R, CENTER, SURR L/R, SURR BACK L/R, and SUBWOOFER jacks to the 7.1-channel analog audio output on your DVD player. If your DVD player has a 5.1-channel analog audio output, don’t connect anything to the AV receiver’s SURR BACK L/R jacks.

 

7.1 ch

 

 

5.1 ch

 

 

FRONT

SURR

CENTER

SURR BACK

L

L

R

R

SUBWOOFER

DVD

L

R L

R

 

L

R

FRONT

SURROUND

CENTER

SUB

 

SURR

 

 

 

WOOFER

 

BACK

DVD player

29

DTR-6.8_En.book Page 30 Wednesday, June 20, 2007 4:16 PM

Connecting the AV Receiver—Continued

Connecting a VCR or DVD Recorder for Playback

 

 

 

With this hookup, you can use your VCR’s tuner to listen to your favorite TV programs via the AV

 

Hint!

 

 

 

receiver, useful if your TV has no audio outputs.

 

 

 

 

 

 

Step 1: Video Connection

Choose a video connection that matches your VCR or DVD recorder ( A , B , or C ), and then make the connection.

You must connect the AV receiver to your TV via the same type of connection.

Step 2: Audio Connection

Choose an audio connection that matches your VCR or DVD recorder ( a , b , or c ), and then make the connection.

With connection , you can listen to the VCR or DVD recorder even in Zone 2.

To enjoy Dolby Digital and DTS, use connection or . (To listen in Zone 2 as well, use and , or and .)

Connection

AV receiver

Signal flow

VCR or DVD recorder

Picture quality

 

A

 

COMPONENT VIDEO IN 2

 

Component video output

Best

 

 

 

VCR/DVR IN S

 

S-Video output

Better

 

B

 

 

 

 

 

 

 

 

C

 

VCR/DVR IN V

 

Composite video output

Standard

 

 

 

VCR/DVR IN L/R

 

Analog audio L/R output

 

 

a

 

 

 

 

 

 

 

 

 

b

 

DIGITAL COAXIAL IN 2 (VCR/DVR)

 

Digital coaxial output

 

 

 

 

DIGITAL OPTICAL IN 1 (GAME/TV)

 

Digital optical output

 

 

c

 

 

 

 

 

 

 

 

.

Connection

A must be

assigned (see page 47)

b

c

C

 

 

B

 

a

 

A

 

 

 

 

L

 

R

 

COAXIAL

OPTICAL

Y

PB

PR

AUDIO

S VIDEO

VIDEO

OUT

OUT

COMPONENT VIDEO OUT

OUT

OUT

OUT

Connect one or the other

Connection c must be assigned (see page 49)

VCR,

DVD recorder

30

Loading...
+ 96 hidden pages