Insinkerator H-Contour-SS User Manual

4 (2)
Insinkerator H-Contour-SS User Manual

The Next

Necessity

Dimensions

 

6"

 

5-3/5"

1/4" Incoming

 

Water Supply

3-7/10"

Inlet Tube

 

Flexible

Outlet Tube

Flexible

Vent Tube

Minimum 2" required from sink hole center to backsplash

11"

NOTE: Max counter thickness is 3".

6-3/4"

6-1/8"

Job Specifications

HWD462-13G-45-10

Instant Hot Water Dispensers

H-Contour-SS

The original instant hot water dispenser with easy-to-twist handle, redesigned

Submittal Sheet

Hot Only – Dispenses near-boiling 200°F water

Includes 2/3-gallon hot water tank

Easy to adjust temperature control

Tool-free tank connections and dry start protection to ease installation

Provides 60 cups/hr of near-boiling water

We Come To You® 3-Year In-Home Limited Warranty*

115 volts, 750 watts, 6.25 amps

Available in chrome

Sample Specification

Specifications

Capacity

2/3-gallon hot water

 

tank dispenses 60

 

cups of 200˚F water

 

per hour

 

 

Electrical

115 volts A.C., 750

 

watts, 6.25 amp

 

heating element

 

with grounded

 

three (3) prong plug

 

 

Thermostat

Snap-action,

 

adjustable from

 

160˚F to 210˚F

 

(factory pre-set

 

at 200˚F)

 

 

Insulation

Meets U.L. 94HF-1

 

flammabiltiy

 

specification

 

 

Valve

Instant, self-closing

 

 

Recommended

30-125 psi

Supply Pressure

 

 

 

Shipping Weight

Approximately

 

7.4 lbs.

 

 

Required

1-1/4" – 1-1/2"

Hole Diameter

standard sink hole

 

 

Instant hot water dispenser(s) shall be InSinkErator Model H-Contour-SS with 2/3-gallon hot water tank, adjustable temperature from 160°F to 210°F and instant, self-closing hot valve.

Warranty:

3-year parts and in-home service.

*The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit.

US Patent Pending (tank enclosure)

Complies with

California Lead

Plumbing Law

USA

1-800-558-5700 www.insinkerator.com

Canada

1-800-558-5700 www.insinkerator.ca

Printed in USA

The Emerson logo is a trademark and a service mark of Emerson Electric Co.

InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models.

©2013 InSinkErator, a business unit of Emerson Electric Co. All Rights Reserved.

Loading...