ELIMINATOR 900
WASTE HANDLING SYSTEM
Automatic self contained waste handling system
Reduces foodservice waste up to 90%
Lower labor and hauling costs
Process water is re-circulated for re-use—saving water and
sewage costs
External silver catch lessens costly silverware replacement
Complete renewal servicing of wear parts without disturbing
either the elecrtrical or plumbing connections
Capacity is up to 1200 lbs./hour of mixed foodservice waste
(food, disposables and paper products)
STANDARD FEATURES
Total stainless steel construction
Automatic, 12 nozzle, wash-down system for extractor
Extractor screw/screen removable from top
2 hp TEFC bottom mount extractor drive motor
5 hp direct drive cutting system motor
1 hp TEFC re-circulating pump
NEMA-12, carbon steel control panel enclosure
Integral or remote NEMA-4 push button station
Single point electrical connection
Pulper lid interlock switch
Extractor chute interlock switch
Automatic shutdown timer for self-cleaning
The Eliminator 900 reduces waste up to 90% by grinding
a wide variety of kitchen waste into a dry pulp like material.
Cylindrical extractor for easy cleaning—no corners
Trough connection
Re-circulating pump
Automatic pulper cleaning package with integral wash and rinse cycle
Permanent trough magnet for silverware catch
Dual-use cutting blades
Project ________________
Item __________________
Quantity _______________
CSI - 11400 _____________
Approval _______________
Date ___________________
Eliminator 900
OPTIONS
Security package inclusive of:
- Pulper lid and extractor discharge chute locking rings
- NEMA-4 stainless steel electronic panel enclosure
- Tamper proof fasteners
Hose reel (30 ft. unmounted)
Remote start-stop station
Chemical additive pump
6245 State Road • Philadelphia, PA 19135 • PH: 800-344-4802 • FX: 215-624-6966 • www.insingermachine.com
ELIMINATOR 900
WASTE HANDLING SYSTEM
Capacity Per Hour 1200 lbs. foodservice waste
Tank Capacity 25 gallons
Pulper Motor 5 hp
Extractor Motor 2 hp
Re-circulation Pump 1 hp
Fresh Water Consumption
Extractor Gearbox 30:1
Drain 4” minimum floor sink
Shipping Weight 700 lbs.
Current
208/3/60
230/3/60
460/3/60
1-2 gallons per minute cold water
50 gallons per day hot water (optional)
Full Load AMPs
29.5
26.9
13.4
SPECIFICATIONS
Utility Requirements:
Hot or cold washdown water supply 1/2", 6.5 GPM@30psig
Cold water supply, 1/2"
Fill: 12 GPM @ 30psig
Run: 1.25 GPM @ 30psig
Max Run: 7.75 GPM @ 30psig during washdown cycle
Nearby drain 1 1/2" min. with air gap.
Takeaway strainer basket and/or enzymatic drain drip recommended.
CONSTRUCTION
Pulper:
• Trough is 12" wide by 5 3/4" tall. Reduction capability as small
as 9”
• Pulping chamber is 24" diameter, type 304 stainless steel.
Single piece construction for durability and ease of cleaning.
• Slurry chamber is constructed of two 5/16" 304 stainless steel
plates encased in 10 gauge stainless steel.
• Pulper has hinged lid with limit switch and compression latch
• Full stainless steel frame with adjustable vibration isolating feet
• Cutting mechanism is 12" diameter type 304 stainless steel
annealed impeller. Cutting blade replacement or adjustment
with single allen wrench and no impeller removal. Cutting
blades are type 440A hardened to Rockwell C-52. Two rotary
blades indexible for double life and five stationary blades for
reduced wear.
• Drive motor to be 5 hp ODP direct drive
Extractor:
• Extractor discharge chute field adjustable to any 45° angle
• Tank door with draw latch for easy access
• Chute door with limit switch and draw latch
• Shell is 12" diameter one piece rolled cylindrical tank, for ease
of cleaning, 14 gauge type 304 stainless steel construction
• Stainless steel screw/screen combination with nylon brush
• 2 hp bottom mount, direct drive TEFC motor with gear reducer
• Screw/screen combination removable from top via socket head
cap screws
Miscellaneous Features:
• Integrated tubular frame with height adjustable feet and
vibration isolator pads
• All motors, valving and piping are located in shrouded bottom
frame work
• Multiple configurations to accommodate most layouts
• Pre-wired to unit mounted J-Box and pre-plumbed for ease of
installation
Note: Due to product improvement we reserve the right to change information and specifications without notice.
6245 State Road • Philadelphia, PA 19135 • PH: 800-344-4802 • FX: 215-624-6966 • www.insingermachine.com
10_2011
ELIMINATOR 900
WASTE HANDLING SYSTEM
Eliminator 900
This drawing is available on the Insinger Web stie at www.insingermachine.com
Contact Insinger Sales at 800-344-4802 for an Installation Drawing Specic to Your Application
6245 State Road • Philadelphia, PA 19135 • PH: 800-344-4802 • FX: 215-624-6966 • www.insingermachine.com
Loading...