Insignia NS-R5101HD User Manual

Congratulations on your purchase of a high-quality Insignia product. Your 5.1-channel surround sound receiver is designed for reliable and troublefree performance.

Use this guide for initial setup of your receiver. If you have questions, see your User Guide for more information.

Package contents

•Remote control

•AAA batteries

•FM antenna

•AM loop antenna

•Microphone for auto setup

•Quick Setup Guide

•User Guide

AAA batteries

Microphone

Remote

control

FM antenna

AM loop antenna

Quick Setup Guide I NS-R5101HD 5.1 Receiver

1 Install remote control batteries

Remove the cover from the back of the remote control, insert the batteries as indicated in the battery compartment, then replace the cover.

2 Connect speakers

Position speakers around your room and connect as shown. Loosen cap, insert speaker wire into the side, then tighten cap.

Power amplifier

Surround back speakers

Powered subwoofer

Front	Front
right	left

Center

																										1	TV or screen					5					Front right speaker
																										2	Front left speaker					6					Surround back left speaker
																										3	Subwoofer					7					Surround back right speaker
																										4	Center speaker					8					Listening position

Surround Surround

right left

3 Connect devices

You can connect headphones and one device, such as game console or video camera, to the front of your NS-R5101 receiver.

	ON/STANDBY	Speaker On/O	Input Selector
	Press to turn on your receiver	Press to turn o speakers
			Turn the knob to switch
	or put it in standby mode	when using headphones or
			between components such
	during normal operation.	TV speakers.		Volume
			as tuner, DVD, CD, or TV.

Power

Press to turn o main power before connecting components.

			Tuning/Preset	Video 3 Input
	Headphone Jack	BAND	Press TUNING buttons to choose an AM	Connect a game console
			or FM radio station. Press PRESET buttons	or video camera here.
		Press to select
			to choose a saved station.
		the radio band,
		FM, FM-MONO,
		or AM.

3 Connect devices, continued

For each device, plug one end of the cable into the back of your receiver. Plug the other end into the device you are connecting. Use the input buttons on your remote control to switch between devices.

SURROUND BACK PRE OUTS CD IN L/R AUDIO

To extend your system to 7.1, connect the PRE OUT SURROUND BACK to a powered amplifier connected to speakers. A separate amp is necessary to make these speakers work.

AUDIO IN GAME/AUX2 L/R

Connect the audio for the GAME/AUX 2 device.

SUBWOOFER PRE OUT

Connect a powered subwoofer to this SUBWOOFER PRE OUT jack.

AUDIO OUT

Connect to a device that requires left/right audio output connection, like a recording device.

IR IN

Connect an IR receiver to this jack.

HDMI IN DVD

HDMI IN CABLE/SAT

HDMI IN GAME/AUX2

Connect a CD player to these jacks.

MONITOR OUT

Connect a TV to this jack, using a Composite cable (not included).

VIDEO IN GAME AUX2

VIDEO DVD IN

Connect a VCR to these

jacks, using a Composite

Connect a Blu-ray Disc player or DVD player to this

cable (not included). jack, using a Composite cable (not included).

AUDIO OUT

VIDEO CABLE/SAT IN

Connect to a device that

Connect cable or satellite TV

requires a composite video

to this jack, using a Composite

SPEAKERS

output connection, like a

recording device.

cable (not included).

Connect speakers to these jacks.

Connect HDMI devices to these jacks.

HDMI OUT

Connect a TV using an

HDMI cable (not included).

OPTICAL IN1 GAME/AUX2 OPTICAL IN2 CABLE/SAT

Connect an optical digital audio device to these jacks.

COAXIAL IN1

Connect a coaxial digital audio device to this jack.

TV IN AUDIO L/R

Connect the audio for a TV to hear its sound through your receiver.

COMPONENT VIDEO OUT

Connect a TV to these jacks, using a

CABLE/SAT IN AUDIO L/R

Component cable (not included).

Connect the audio for the

CABLE/SAT device.

COMPONENT VIDEO INPUT 1 and 2

Connect a DVD player, set-top box, or other

component using a Component cable (not included).

ANTENNA GND/AM Loop

Connect the FM and AM loop

antennas to listen to radio

broadcasts.

DVD IN AUDIO L/R

Connect the audio for the device connected to the COMPONENT VIDEO IN 1 (DVD) jacks or the VIDEO DVD IN jack.

CD player

CD Player

Receiver

Antenna

for FM radio

Receiver

for AM radio

Receiver

Connecting aVCR

To connect a VCR:

1 Connect a standard video cable to the VIDEO IN GAME/AUX2 jack on the back of your receiver and to the VIDEO OUT jack on the VCR.

2 Connect a standard video cable to the VIDEO OUT GAME/AUX2 jack on the back of your receiver and to the VIDEO IN jack on the VCR.

3 Connect an audio cable to the AUDIO IN GAME/AUX2 L/R jacks on the back of your receiver and to the AUDIO OUT jacks on the VCR.

4 Connect an audio cable to the AUDIO OUT GAME/AUX2 L/R jacks on the back of your receiver and to the AUDIO IN jacks on the VCR.