Insignia NS-B4111 User Manual

0 (0)
Insignia NS-B4111 User Manual

Read these instructions carefully before using this product, and retain them in a safe place for reference.

Features

Top

1

Handle

5

Function (RADIO/CD/AUX)

2

CD door

6

Power (ON/OFF)

3

Volume control

7

Tuning control

4

FM antenna

8

CD door open (push tab)

Back

 

1.5V x 8 UM 2 or

 

 

 

 

 

 

 

 

+

-

+

-

 

“C” size or LR14

 

 

 

 

 

 

 

-

+

 

-

+

 

 

 

 

 

 

 

 

 

 

 

 

 

+

-

+

-

 

 

 

 

 

 

 

 

 

 

 

 

 

-

+

 

-

+

 

 

 

 

 

 

 

 

1

AUX IN jack

 

 

 

 

 

 

2

Battery compartment

 

 

 

 

 

 

 

3

AC input

 

 

 

 

 

 

 

Front

1

Speaker

8

Speaker

2

CD play/pause button

9

Time set button

3

CD stop button

10

Display button

4

CD skip next button

11

Repeat button

5

CD track display

12

Random button

6

CD skip previous button

13

Standby button

7

AM/FM button

 

 

Setting up your CD player

Connecting AC power

1Connect the provided AC power cord to the AC input socket on the CD player.

2 Plug the cord into a household AC power socket.

Installing batteries

1Insert eight C alkaline batteries (not included) into the battery compartment as indicated by the diagram within the compartment.

2 Securely close the battery compartment cover.

Notes: Battery power is used only when AC power is disconnected. Replace all batteries at the same time with the same battery type. Do not mix battery types.

When CD player is stored unused for a long time, remove the batteries to prevent damage.

Quick Installation Guide

NS-B4111 CD Boombox

Setting the clock

1 Turn o your CD player, then press TIME SET. The hour digits flash. Set time under Standby mode.

2 Press or to adjust the hour, then press TIME SET. The minute digits flash.

3 Press or to adjust the minute, then press TIME SET. The clock is set.

4 To view the clock, turn on your CD player, then press DISPLAY.

NOTE: While the boombox is in standby mode running on battery power, your batteries will continue to slowly drain, although the clock’s time will be saved. To prevent battery drain, turn the boombox completely o by sliding the power switch (although your clock setting will be lost).

Using your CD player

Warning: Use of any controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure.

Using the radio

1Slide the FUNCTION selector to RADIO, then press AM/FM to select AM or FM mode.

2Turn the TUNING control until you locate the station you want. If you tune to an FM station broadcasting in stereo, the stereo indicator turns on.“ST” will appear in the upper-right of the LCD screen when stereo is on.

For optimum FM reception, make sure that the FM (telescopic) antenna is fully extended and vertical.

For optimum AM reception, rotate the CD player to orient its built-in antenna until you get the strongest signal.

Using the CD player

The CD player can play standard audio CDs and audio CDs created on a computer’s CD-R/CD-RW drive.

1Slide the FUNCTION selector to CD, then lift the CD door and insert a CD with the label facing up. Make sure that the CD is correctly mounted on the spindle and locked in place.

NS-B4111_09-0103_QSG_V2_EN.indd 1

3/4/20093/4/2009 7:57:127:57:12 PMPM

Loading...
+ 1 hidden pages