Infinity KAPPA 32.3CF, KAPPA 693.3I, KAPPA 572.3CF, KAPPA 42.3I, KAPPA 52.3I User Manual

...
0 (0)
Infinity KAPPA 32.3CF, KAPPA 693.3I, KAPPA 572.3CF, KAPPA 42.3I, KAPPA 52.3I User Manual

kappa series

42.3i,52.3i,62.3i,63.3i,

652.3i,692.3i,693.3i,

32.3cf,462.3cfp,572.3cf

instructions

Thank

multi-element manual to make possible. Please to keep your sales both are available

INSTALLATION WARNINGS AND TIPS

ABOUT THESE INSTRUCTIONS

Installation of automotive stereo components can require extensive experience with a variety of mechanical and electrical procedures.

Although these instructions explain how to install Kappa Series multi-element speakers in a general sense, they do not show the exact installation methods for your particular vehicle. If you do

not feel you have the experience, do not attempt the installation yourself, but instead ask your authorized Infinity car audio dealer about professional installation options.

LOUD MUSIC AND HEARING

Playing loud music in an automobile can hinder your ability to hear traffic as well as permanently damage your hearing.The maximum volume levels achievable with Infinity speakers, combined with high power amplification, may exceed safe levels for extended listening. We recommend using low volume levels when driving. Infinity accepts no liability for hearing loss, bodily injury, or property damage as a result of use or misuse of this product.

REAR DECK PRECAUTION

In some cars, fuel tanks may be located directly beneath the rear deck. Before installation, make sure there is adequate speaker basket clearance before considering this location!

ABOUT THE CROSSOVER

Except for the 462.3cfp, each Kappa Series multielement speaker includes a crossover for in-line connection to an amplifier output and is required for proper operation (see Figure 7 on the next page).The attached crossover wires are keyed and color-coded to aid in correct polarity connections.

Do not omit the crossover or substitute another one – doing so will damage the speaker.

INSTALLATION TIPS

Always wear protective eyewear when using any tools.

Turn off all audio components and other electrical devices before you start. Disconnect the (–) negative lead from your vehicle’s battery.

Keep speakers in their package until final installation. When moving a speaker, always rest it with the cone or dome facing up. Never use force to install any speaker.

Check clearances on both sides of a planned mounting surface before drilling any holes or installing any screws. Remember that the screws can extend behind the surface.

At the installation sites, locate and make a note of all fuel lines, hydraulic brake lines, vacuum lines and electrical wiring. Use extreme caution when cutting or drilling in and around these areas.

Before drilling or cutting holes, use a utility knife to remove unwanted fabric or vinyl, to keep material from snagging in a drill bit or saw.

For door installations, check the clearance with the windows throughout the range of the window’s travel, and verify that a mounted speaker will not interfere with the window crank or power window mechanism.

If mounting speakers elsewhere, check for clearance around rear deck torsion bars, glove box or other structural elements.

Do not mount speakers where they will get wet.

INSTALLATION

Figure 1. Mounting the 42.3i, 52.3i, 62.3i, 63.3i, 692.3i, 693.3i, 32.3cf or 572.3cf.

NOTE:The 32.3cf, 462.3cfp and 572.3cf speakers are designed to be installed under factory grilles. Consequently, no grilles are packaged with these models.

NOTE: If you are mounting the 572.3cf in a 6" x 8" location, use the adapter provided.

Figure 2. Modifying the 42.3i to be installed in locations requiring fewer than 4 mounting “ears”. (The 62.3i and 63.3i may be similarly modified.)

NOTE: Grip the tab with pliers and bend to detach it from the speaker.

ROTATETWEETER SO IT IS ANGLEDTOWARD THE LISTENER USING THE UNIPIVOT(patent no. 6,002,780) FEATURE ONTHE 52.3i, 62.3i, 652.3i, 572.3cf AND 692.3i.

- 2 -

Loading...
+ 2 hidden pages