Indesit FIE 36 K.B GB-1, FIE 36 K.B IX GB-1 User Manual

5 (1)

Operating Instructions

OVEN

 

 

 

 

 

 

 

 

 

Contents

 

 

 

 

GB

 

 

 

 

 

 

 

 

Installation, 2-3

 

 

GB

 

 

 

 

Positioning

 

 

 

Electrical connections

English, 1

Data plate

 

 

 

Description of the appliance, 4

 

 

 

Overall view

 

 

 

Control panel

 

 

 

Start-up and use, 5

 

 

 

Starting the oven

 

 

 

Cooking modes, 6-7

 

 

 

Cooking modes

 

 

 

Practical cooking advice

 

 

 

Cooking advice table

FIE 36 K.B GB/1

FIE 36 K.B IX GB/1

The electronic cooking programmer, 8

Precautions and tips, 9

General safety Disposal

Respecting and conserving the environment

Maintenance and care, 10

Switching the appliance off

Cleaning the appliance

Cleaning the oven door

Replacing the light bulb

Assistance

Indesit FIE 36 K.B GB-1, FIE 36 K.B IX GB-1 User Manual

Installation

Before placing your new appliance into operation GB please read these operating instructions carefully.

They contain important information for safe use, for installation and for care of the appliance.

Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.

Positioning

Keep packaging material out of the reach of children. It can become a choking or suffocation hazard. (see Precautions and tips).

The appliance must be installed by a qualified person in compliance with the instructions provided. Incorrect installation may cause harm to persons, animals or may damage property.

Fitting the appliance

Use the appropriate cabinet to ensure that the appliance functions properly.

The panels adjacent to the oven must be made of heat-resistant material.

Cabinets with a veneer exterior must be assembled with glues which can withstand temperatures of up to 100°C.

to install the oven under the counter (see diagram) and in a kitchen unit, the cabinet must have the following dimensions:

 

 

 

 

 

 

 

.

 

 

 

 

 

 

 

in

 

 

 

 

 

 

.m

 

 

 

 

mm.23

 

 

mm

 

 

mm.

 

 

 

547

 

 

 

 

 

 

 

 

.

 

 

 

 

 

 

45

mm

 

 

mm.595

 

 

mm.567

 

 

 

593

 

 

 

558

m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m.

 

 

 

5 mm.

 

 

 

 

 

 

595

 

 

m

 

 

 

 

 

 

mm.

 

.

 

 

 

 

 

 

545

m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

.

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

24

 

 

 

 

 

 

 

The appliance must not come into contact with electrical parts once it has been installed.

The consumption indications on the data plate have been calculated for this type of installation.

Ventilation

To ensure good ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams).

.

45

mm

.

mm

 

560

 

 

 

Centring and fastening

Secure the appliance to the cabinet by opening the oven door and putting 4 screws into the 4 holes of the outer frame.

! All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.

2

Electrical connection

! Ovens with a three-pole power supply cable are designed to operate with alternated current at the supply frequency and voltage indicated on the data plate (at the bottom of the oven dashboard). The earthing conductor of the cable is the yellow-green conductor.

Two types of connection are provided:

Connection n° 1

Connecting the power supply cable to the mains.

Fit a normalized plug to the cable, which corresponds to the load indicated on the data plate; if the cooker is connected directly to the mains, an omnipolar circuitbreaker with a minimum opening of 3 mm between the contacts, suitable for the load indicated and complying with current directives, must be installed between the appliance and the mains (the earthing wire must not be interrupted by the circuit-breaker). The power supply cable must be positioned so that it does not exceed room temperature by 50°C at any point of its length. Before making the connection check that:

the circuit breakers or fuses of the home system can support appliance load (see data plate);

the power supply system has an efficient earthing connection which complies with the provisions of current regulations and the law;

there is easy access to the socket or the omnipolar

circuit-breaker once the cooker has been installed. ! do not use reducers, adapters or shunts as these could cause heating or burning.

Connection n° 2

Disposing of the plug.

!THIS APPLIANCE MUST BE EARTHED.

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket. Instructions for connecting cable to an alternative plug:

!the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow

-Earth

Blue

-Neutral

Brown

-Live

If the colours of the wires in the mains lead do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.

Connect Green & Yellow wire to terminal marked “E” or 6 or coloured Green or Green & Yellow.

Connect Brown wire to terminal marked “L” or

coloured Red. Connect Blue wire to terminal marked

“N” or coloured Black. If a 13 amp plug (BS 1363) is GB used it must be fitted with a 13 amp fuse.

A 15 amp plug must be protected by a 15 amp fuse, either in the plug or adaptor or at the distribution board.If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

How to connect an alternative plug

The wires in this mains lead are coloured in accordance with the following code:

BLUE “NEUTRAL” (N) BROWN “LIVE” (L) GREEN AND YELLOW “EARTH” (E)

GREEN &

YELLOW

BROWN

13 amp fuse

 

BLUE

CROSS-BAR

 

CORD GRIP

Disposing of the appliance

When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above.

! The plug and socket must be easily accessible.

DATA PLATE

Dimensions

width cm 43.5

height cm 32

 

depth cm 40

Volume

lt. 56

Electrical

voltage: 230-240V ~ 50Hz

maximum power absorbed

connections

2250W-2400W

 

 

Directive 2002/40/EC on the label

 

of electric ovens.

ENERGY LABEL

Standard EN 50304

 

 

Declared energy consumption for

 

Forced convection Class – heating

 

mode: Fan assisted

 

This appliance conforms to the

 

following European Economic

 

Community directives:

 

- 2006/95/EEC of 12/12/06 (Low

 

Voltage) and subsequent

 

amendments;

 

- 89/336/EEC of 03/05/89

 

(Electromagnetic Compatibility) and

 

subsequent amendments;

 

- 93/68/EEC of 22/07/93 and

 

subsequent amendments.

 

- 2002/96/EC

3

Description of the appliance

Overall view

GB

Control panel

GUIDES for the

 

sliding racks

GRILL

position 5

 

position 4

DRIPPING PAN

position 3

position 2

 

 

position 1

Control panel

 

SELECTOR

ELECTRONIC

 

 

Indicator light

 

Knob

programmer

 

 

THERMOSTAT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•• ••

VARIABLE GRILL

Knob

4

Loading...
+ 8 hidden pages