Image IMTL41205.0 User Manual

1.21 Mb
Loading...

Model No. IMTL41205.0

Serial No.

Serial Number

Decal

QUESTIONS?

As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY.

CALL TOLL-FREE:

1-800-753-4645

Mon.–Fri., 6 a.m.–6 p.m. MST

ON THE WEB:

www.iconservice.com

CAUTION

Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.

USER'S MANUAL

Visit our website at

www.imagefitness.com

new products, prizes, fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill.

1.It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.

2.Use the treadmill only as described.

3.Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.

using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support clothes are recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals.

10.When connecting the power cord (see page 8), plug the power cord into a surge suppressor (not included) and plug the surge suppressor into a grounded circuit capable of carrying 15 or more amps. No other appliance should be on the same circuit. Do not use an extension cord.

4.Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a 11. Use only a single-outlet surge suppressor that

garage or covered patio, or near water.

5.Do not operate the treadmill where aerosol products are used or where oxygen is being administered.

6.Keep children under the age of 12 and pets away from the treadmill at all times.

7.The treadmill should be used only by persons weighing 250 pounds or less.

8.Never allow more than one person on the treadmill at a time.

9.Wear appropriate exercise clothes when

meets all of the specifications described on page 8. To purchase a surge suppressor, see your local IMAGE dealer or call the toll-free telephone number on the front cover of this manual and order part number 146148, or see your local electronics store.

12.Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed, accelerate, or stop unexpectedly, which may result in a fall and serious injury.

13.Keep the power cord and the surge suppressor away from heated surfaces.

2

14.Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See TROUBLESHOOTING on page 13 if the treadmill is not working properly.)

15.Never start the treadmill while you are standing on the walking belt. Always hold the handrails while using the treadmill.

16.The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed.

17.Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and move the reset/off circuit breaker to the “off” position when the treadmill is not in use. (See the drawing on page 4 for the location of the circuit breaker.)

18.Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 5, and HOW TO FOLD AND MOVE THE TREADMILL on page 12.)

You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

19.When folding or moving the treadmill, make sure that the storage latch is fully closed.

20.Inspect and properly tighten all parts of the treadmill regularly.

21.Never insert any object into any opening.

22.DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only.

23.This treadmill is intended for in-home use only. Do not use this treadmill in a commercial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown here has been placed on the treadmill. If the decal is missing, or if it is not legible, call the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown.

3

BEFORE YOU BEGIN

Thank you for selecting the IMAGE® FREESTRIDE 16.0 treadmill. The FREESTRIDE 16.0 treadmill combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. And when you’re not exercising, the unique FREESTRIDE 16.0 treadmill can be folded up, requiring less than half the floor space of other treadmills.

For your benefit, read this manual carefully before you use the treadmill. If you have questions after reading this manual, please see the front cover of this manual. To help us assist you, note the product model

number and serial number before contacting us. The model number of the treadmill is IMTL41205.0. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location).

To avoid a registration fee for any service needed under warranty, you must register the treadmill at www.iconservice.com/registration.

Before reading further, please review the drawing below and familiarize yourself with the labeled parts.

Water Bottle Holder

Bookrack

 

(No bottle is included)

 

 

Console

Handrail

Key/Clip

Storage Latch

 

 

Upright

 

RIGHT SIDE

Walking Belt

Reset/Off

 

Circuit Breaker

Foot Rail

 

 

Power Cord

 

Cushioned Walking Platform

 

for maximum exercise comfort

BACK

 

Rear Roller

 

Adjustment Bolts

Incline Leg

 

4

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches

and your own phillips screwdriver

,

wire cutters

, adjustable wrench

, and needlenose pliers

.

To identify the assembly hardware, see the PART IDENTIFICATION CHART in the center of this manual.

1.Make sure that the power cord is unplugged.

With the help of a second person, carefully tip the treadmill onto its left side as shown. Partially fold the Frame (75) so the treadmill is more stable. Do not fully fold the treadmill until it is completely assembled.

Attach four Base Pads (40) to the Base (11) with four 1” Tek Screws (94). Next, attach a Wheel (37) to the right side of the Base with a Wheel Bolt (36) and a Wheel Nut (38). Do not overtighten the Wheel Bolt; the Wheel should turn freely.

2.See drawing 2a. Make sure that there are two U-nuts (57) in the bottom of each Upright (62, 76).

Identify the Right Upright (62), which has a large round hole and a slot near the lower end. While a second person holds the Right Upright near the Wire Harness (21), insert the end of the Wire Harness into the round hole and out of the upper end of the Right Upright.

Slide the slot in the Right Upright (62) onto the Upright Lock Bracket (18) (see drawing 2b); slide the Right Upright down until it reaches the Base (11). Make sure that the Wire Harness (21) is not pinched. Attach the Right Upright with two 2 1/4” Bolts (78) and two 5/16” Star Washers (20).

With the help of a second person, tip the treadmill onto its other side. Attach the Left Upright (76) as described above. (Note: There is not a wire harness on the left side.) Attach the other Wheel (not shown) to the Base (11) as described in step 1.

1

 

40

 

 

 

 

36

 

37

94

75

 

 

 

40

 

38

94

 

 

40

 

 

94

 

11

40

 

 

94

2

 

76

 

 

 

 

21

62

 

 

Slot

Round Hole

18

 

 

20

78

 

11

 

 

2a

62, 76

2b

18

 

 

Side

62

 

 

View

 

57

 

 

5

3.

With the help of a second person, position the treadmill

3

 

 

 

 

 

with the Uprights (62, 76) in a vertical position as shown.

 

21

 

 

 

 

 

 

 

 

Route the Wire Harness (21) up through the bracket on

 

 

 

Large

 

 

the Right Handrail (47) and out the large hole in the side

 

 

 

Hole

 

 

 

 

 

 

 

 

of the Right Handrail. Next, insert the bracket into the top

 

 

Bracket

 

 

of the Right Upright (62). Attach the Right Handrail with

 

76

 

 

two 1” Bolts (8) and two 1/4” Star Washers (9) as shown.

 

 

47

 

 

 

Do not tighten the Bolts yet.

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

Attach the Left Handrail (not shown) as described above.

 

 

 

 

9

 

 

 

 

 

 

 

Note: There is not a wire harness on the left side.

 

 

 

 

62

 

 

 

 

 

 

 

 

 

 

8

9

 

4. Hold the Crossbar (34) between the Handrails (1, 47).

4

 

Hole

 

 

 

Attach the Crossbar with two Crossbar Screws (53) and

 

46

 

 

 

 

 

 

 

two Crossbar Star Washers (88). Do not tighten the

10

 

 

 

 

 

Crossbar Screws yet.

 

 

 

 

 

 

 

 

 

 

 

Hold the Console (10) and the Console Base (46) near the

1

 

 

91

47

 

 

 

 

 

 

Handrails (1, 47). See the inset drawing. Route the

 

 

 

 

 

 

88

 

 

 

 

ground wire (A) from the Console down through the round

 

 

 

 

 

hole in the bottom of the Console Base. Next, route the

 

53

34

 

 

 

 

 

 

 

 

ground wire through the two indicated plastic ties on the

 

 

 

 

 

 

Console Base.

 

 

Hole

A

88

 

 

 

A

 

 

 

Attach the end of the ground wire (A) to the small hole in

 

 

 

53

 

 

 

 

 

 

the side of the Right Handrail (47) with a Silver Ground

 

 

 

 

 

 

Screw (91).

 

Ties

 

 

5.

Place the Console Base (46) on the Right Handrail (47)

5

46

 

 

 

 

and the Left Handrail (not shown). Attach the Console

 

 

 

 

 

 

 

 

 

 

Base with four 3/4” Screws (13) (only two Screws are

 

 

 

 

 

 

shown). Do not tighten the Screws yet.

 

 

21

 

 

 

Insert the Wire Harness (21) through the two indicated

 

 

 

96

 

 

plastic ties on the Console Base (46). Next, insert the

 

 

 

 

 

Wire Harness up through the indicated opening in the

 

 

 

 

 

 

Console Base. Make sure that the Console Cover (96) is

 

Ties

 

 

 

 

securely attached to the Console Base.

 

 

 

 

 

 

See the inset drawing. Look at the top of the Console

13

47

 

 

 

 

 

 

21

 

 

 

Base (46). Insert the Wire Harness (21) through the plas-

 

 

 

 

 

 

 

 

 

Tie

 

tic tie on top of the Console Base.

 

 

 

 

 

 

 

 

 

 

46

6

+ 13 hidden pages