Image IMTL39606.2 User Manual

Loading...

Model No. IMTL39606.2

Serial No.

Serial Number

Decal

QUESTIONS?

As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY.

CALL TOLL-FREE:

1-800-753-4645

Mon.–Fri., 6 a.m.–6 p.m. MST

ON THE WEB:

www.iconservice.com

CAUTION

Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.

USER'S MANUAL

Visit our website at www.imagefitness.com

new products, prizes, fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.

IMAGE is a registered trademark of ICON IP, Inc.

2

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill.

1.It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.

2.Use the treadmill only as described.

3.Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.

4.Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near water.

5.Do not operate the treadmill where aerosol products are used or where oxygen is being administered.

6.Keep children under the age of 12 and pets away from the treadmill at all times.

7.The treadmill should be used only by persons weighing 275 pounds or less.

8.Never allow more than one person on the treadmill at a time.

9.Wear appropriate exercise clothes when using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support clothes are recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals.

10.When connecting the power cord (see page 11), plug the power cord into a surge suppressor (not included) and plug the surge suppressor into a grounded circuit capable of carrying 15 or more amps. No other appliance should be on the same circuit. Do not use an extension cord.

11.Use only a single-outlet surge suppressor that meets all of the specifications described on

page 11. To purchase a surge suppressor, see your local IMAGE dealer or call the toll-free telephone number on the front cover of this manual and order part number 146148, or see your local electronics store.

12.Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed, accelerate, or stop unexpectedly, which may result in a fall and serious injury.

13.Keep the power cord and the surge suppressor away from heated surfaces.

14.Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See TROUBLESHOOTING on page 20 if the treadmill is not working properly.)

15.Read, understand, and test the emergency stop procedure before using the treadmill (see HOW TO TURN ON THE POWER on page 12).

16.Never start the treadmill while you are standing on the walking belt. Always hold the handrails while using the treadmill.

17.The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed.

18.Never leave the treadmill unattended while it is running. Always remove the key and unplug the power cord when the treadmill is not in use.

19.The pulse sensor is not a medical device. Various factors, including the user's movement, may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.

3

20.Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD AND MOVE THE TREADMILL on page 18.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

21.When folding or moving the treadmill, make sure that the storage latch is fully closed.

22.Inspect and properly tighten all parts of the treadmill regularly.

23.Never insert any object into any opening.

24. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only.

25.This treadmill is intended for in-home use only. Do not use this treadmill in a commercial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown here have been placed on the treadmill. If a decal is missing, or if it is not legible, call the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown. Note:

The decals are not shown at actual size.

4

BEFORE YOU BEGIN

Thank you for selecting the new IMAGE® 15.5 S treadmill. The 15.5 S treadmill combines advanced technology with innovative design to help you get the most from your exercise in the convenience of your home. And when you’re not exercising, the 15.5 S treadmill can be folded up, requiring less than half the floor space of other treadmills.

For your benefit, read this manual carefully before using the treadmill. If you have questions after reading this manual, please see the front cover of this manual. To help us assist you, note the product model

number and serial number before calling. The model number of the treadmill is IMTL39606.2. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location).

To avoid a registration fee for any service needed under warranty, you must register the treadmill at www.iconservice.com/registration.

Before reading further, please review the drawing below and familiarize yourself with the labeled parts.

 

Fan

Accessory Tray

 

 

Console

Handrail

 

 

Key/Clip

Storage Latch

Upright

 

 

Reset/Off

 

Circuit Breaker

Walking Belt

Power Cord

 

Foot Rail

 

 

Cushioned Walking Platform

 

for maximum exercise comfort

BACK

RIGHT SIDE

 

Rear Roller

 

Adjustment Bolts

 

 

5

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking belt or to the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, wipe it off with a soft cloth and mild, non-abrasive cleaner.

Assembly requires the included hex keys

and your own phillips screwdriver

, rubber

mallet

, adjustable wrench

, and wire cutters

.

 

To identify assembly hardware, see the drawings below. The number in parentheses below each drawing is the key number of the part, from the PART LIST in the center of the manual. The number following the parentheses is the quantity used in assembly. To avoid damaging plastic parts, do not use power tools for assembly.

Handrail Bolt (20)–4

3/4" Screw (2)–6

Wheel Spacer

1/4" Star Washer

 

 

(44)–4

 

 

(21)–2

 

 

 

 

Silver Ground

 

Handrail Star

Upright Bolt/Wheel Bolt (27)–6

Screw (87)–2

 

Frame Washer

Washer (19)–4

 

 

 

 

 

(33)–2

 

 

 

 

 

 

 

Upright Star

 

 

 

 

 

 

Frame Bolt (32)–2

 

Console

 

 

 

Bolt (22)–2

Nut (47)–4

Washer (39)–4

1. Orient the Base (48) as shown.

1

 

 

 

Identify the Right Upright (36), which has a

 

 

square hole near the lower end.

 

 

Orient the Right Upright (36) as shown, and

36

 

 

 

attach it to the Base (48) with two Upright Bolts

 

 

(27) and two Upright Star Washers (39); do not

 

 

tighten the Upright Bolts yet.

 

 

 

48

 

 

Square

39

 

Hole

27

 

 

 

 

39

 

 

27

 

6

 

2.

Orient the Left Upright (31) as shown, and attach

2

 

 

 

 

it to the Base (48) with two Upright Bolts (27) and

 

 

 

 

 

Latch

 

 

 

two Upright Star Washers (39); do not tighten

 

 

 

 

 

Holes

 

 

 

the Upright Bolts yet.

 

 

 

 

 

 

 

 

 

 

 

48

 

 

 

 

 

31

 

 

 

 

 

 

 

39

 

 

 

 

39

27

 

 

 

 

 

3.

Attach a Wheel (45) to each side of the Base

3

45

44

 

(48) with a Wheel Bolt (27), two Wheel Spacers

 

 

44

 

 

 

(44), and a Nut (47) as shown. Do not over-

 

 

27

 

 

 

 

 

tighten the Wheel Bolts; the Wheels should

 

47

 

 

 

turn freely.

 

 

 

 

 

45

44

 

 

 

44

47

 

 

 

 

 

 

27

 

 

48

4. Turn the Base (48) over, and set it near the front

4

 

 

 

of the treadmill as shown.

 

 

 

 

 

 

Large

 

 

 

 

Cut the tie holding the Upright Wire (28) in a bun-

 

 

 

Hole

 

 

 

48

dle. Leave the large colored tie on the end of

 

 

 

 

 

 

 

the Upright Wire.

31

 

 

Tie

 

 

 

Insert the Upright Wire (28) into the large hole at

 

 

 

 

the bottom of the Right Upright (36) (see the

 

 

 

28

inset drawing) and out of the top.

 

 

 

 

Raise the Uprights (31, 36) so the Base (48) is

 

 

 

 

flat on the floor. Make sure that the end of the

 

 

 

28

Upright Wire (28) does not fall into the Right

 

 

36

 

 

 

Upright. It may be helpful to bend the colored

 

 

 

 

tie on the end of the Upright Wire over the

 

Colored Tie

 

Right Upright.

 

28

 

 

 

 

 

 

 

7

 

 

 

5. Raise the Uprights (31, 36).

5

31

 

 

 

 

 

 

 

 

 

See the left inset drawing. Identify the two Frame

 

 

36

 

Spacers (34). Open the included packet of

 

 

 

 

grease, and apply grease to both sides of both

 

 

 

 

Frame Spacers. Then, identify the outer side of

 

 

47

 

each Frame Spacer.

 

 

 

Hold the Frame Spacer (34) between the Right

 

 

34

 

 

 

 

 

Upright (36) and the Lift Frame (59), with the

 

 

 

 

outer side of the Frame Spacer facing the

 

 

33

 

Right Upright. Attach the Right Upright to the

 

 

 

Lift Frame with a Frame Bolt (32), a Frame

 

59

 

32

Washer (33), and a Nut (47); do not tighten the

 

 

 

Frame Bolt yet.

 

 

 

 

 

34

 

36

 

 

 

 

 

 

 

Outer

47

 

 

 

 

 

 

 

Side

 

 

 

 

 

33

32

 

 

Inner

34

 

 

 

Side

 

 

 

59

 

 

 

 

 

6. See the left inset drawing. Identify the outer side

6

 

 

 

of the remaining Frame Spacer (34).

31

 

 

 

 

 

Hold the Frame Spacer (34) between the Left

 

47

 

 

Upright (31) and the Lift Frame (59), with the

 

 

 

 

outer side of the Frame Spacer facing the

 

34

 

 

Left Upright. Attach the Left Upright to the Lift

 

 

 

 

Frame with a Frame Bolt (32), a Frame Washer

 

33

 

 

(33), and a Nut (47); do not tighten the Frame

 

 

 

32

 

 

 

Bolt yet.

59

 

 

 

 

 

 

 

 

 

 

34

 

31

 

 

 

Outer

47

 

 

 

 

 

 

 

Side

 

 

 

 

32

33

 

 

 

Inner

34

 

 

Side

59

 

 

 

 

8

 

 

 

+ 18 hidden pages