Image IMTL22506.0 User Manual
Model No. IMTL22506.0
Serial No.
Write the serial number in the space above for future reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY.
CALL TOLL-FREE:
1-800-753-4645
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.iconservice.com
CAUTION
Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.
USER'S MANUAL
Visit our website at
www.imagefitness.com
new products, prizes, fitness tips, and much more!
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Note: A PART IDENTIFICATION CHART, an EXPLODED DRAWING, and a PART LIST are attached in the center of this manual.
IMAGE is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill.
1.It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.
2.Use the treadmill only as described.
3.Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
4.Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near water.
5.Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
6.Keep children under the age of 12 and pets away from the treadmill at all times.
7.The treadmill should not be used by persons weighing more than 250 pounds.
8.Never allow more than one person on the treadmill at a time.
9.Wear appropriate exercise clothes when using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support clothes are recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals.
10.When connecting the power cord (see page 10), plug the power cord into a surge suppressor (not included) and plug the surge suppressor into a grounded circuit capable of carrying 15 or more amps. No other appliance should be on the same circuit. Do not use an extension cord.
11.Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. To purchase a surge suppressor, see your local IMAGE dealer or call the toll-free telephone number on the front cover of this manual and order part number 146148, or see your local electronics store.
12.Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed, accelerate, or stop unexpectedly, which may result in a fall and serious injury.
13.Keep the power cord and the surge suppressor away from heated surfaces.
14.Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See page 16 if the treadmill is not working properly.)
15.Read, understand, and test the emergency stop procedure before using the treadmill (see STEP-BY-STEP CONSOLE OPERATION on page 11).
16.Never start the treadmill while you are standing on the walking belt. Always hold the handrails while using the treadmill.
17.The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed.
18.The pulse sensor is not a medical device. Various factors, including your movement, may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.
19.Never leave the treadmill unattended while it is running. Always remove the key and unplug the power cord when the treadmill is not in use.
20.Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO MOVE THE TREADMILL on page 14.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
21.Do not change the incline of the treadmill by placing objects under the treadmill.
22.When folding or moving the treadmill, make sure that the storage latch is fully closed.
3
23.Inspect and properly tighten all parts of the treadmill regularly.
24.Never drop or insert any object into any opening.
25.DANGER: Always unplug the power
cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures
described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only.
26.This treadmill is intended for in-home use only. Do not use this treadmill in any commercial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decals shown here have been placed on the treadmill. If a decal is missing, or if it is not legible, call the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown. Note: The decals are not shown at actual size.
4
BEFORE YOU BEGIN
Thank you for selecting the IMAGE® 425 GTX treadmill. The 425 GTX treadmill combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. And when you’re not exercising, the unique 425 GTX can be folded up, requiring less than half the floor space of other treadmills.
For your benefit, read this manual carefully before you use the treadmill. If you have questions after reading this manual, please see the front cover of this manual. To help us assist you, note the product model
number and serial number before calling. The model number of the treadmill is IMTL22506.0. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location).
To avoid a registration fee for any service needed under warranty, you must register the treadmill at www.imageservice.com/registration.
Before reading further, please review the drawing below and familiarize yourself with the labeled parts.
|
|
Console |
|
Accessory Tray |
Water Bottle Holder* |
|
|
|
|
|
Key/Clip |
|
Storage Latch |
Handrail |
|
|
FRONT |
|
Upright |
|
|
|
Reset/Off |
|
|
Circuit Breaker |
Walking Belt |
|
|
Foot Rails |
|
Power Cord |
|
|
|
|
|
RIGHT SIDE |
BACK |
|
|
|
Incline Pin |
|
Rear Roller |
Incline Leg |
*No water bottle is included |
|
|
|
Adjustment Bolts |
|
|
|
5 |
|
ASSEMBLY
To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keyes |
and your own phillips screwdriver |
, two |
||
adjustable wrenches |
, and needlenose pliers |
. To avoid damaging plastic parts, |
||
do not use power tools for assembly. |
|
|
|
|
To identify the assembly hardware, see the PART IDENTIFICATION CHART in the center of this manual.
1.Attach six Base Pads (63) to the undersides of the Base (46) and the Extension Legs (56) with six 3/4" Tek Screws (3). Note: There are small holes for attaching the Base Pads only in the undersides of the Base and the Extension Legs.
2.Insert an Extension Leg (56) into each end of the Base (46). Attach each Extension Leg with two Extension Leg Screws (89).
Attach a Wheel (68) to the outer side of each Extension Leg (56) with a Wheel Bolt (67), a 3/8" Washer (66), and a 3/8" Nut (61) as shown. Note: Do not overtighten the Wheel Bolts; the Wheels should turn freely.
1 |
|
|
3 |
|
|
|
|
|
|
|
|
|
63 |
46 |
|
|
|
|
|
|
|
|
|
3 |
|
3 |
|
|
|
|
|
|
|
63 |
|
|
|
3 |
|
|
63 |
|
|
|
|
56 |
|
|
|
|
|
|
63 |
|
2 |
|
|
|
|
|
|
89 |
|
|
67 |
56 |
|
|
46 |
|
|
|
|
|
|
|
61 |
|
89 |
68 |
|
|
|
|
66 |
|
|
|
|
|
|
61 |
56 |
|
|
|
|
||
|
|
|
|
|
|
|
|
66 |
67 |
|
|
|
|
|
|
|
|
|
68 |
6
3.Have a second person hold the Base (46) in a vertical position as shown. Hold the Right Upright (62) against the Base so the indicated large hole is in the position shown. Attach the Right Upright with two Upright Bolts (65), two 3/8" Washers (66), and two 3/8" Nuts (61) as shown. Do not tighten the Upright Bolts yet.
Attach the Left Upright (not shown) to the Base (46) in the same way. Note: The Left Upright does not have a large hole.
4.Hold a Frame Spacer (27) against the right side of the Frame (79) as shown. Insert a Frame Bolt (70) into the frame bolt hole in the Upright Spacer and the Frame.
Next, tighten a Spacer Screw (45) into the Upright Spacer and the Frame. Then, remove the Frame Bolt.
Repeat this step on the other side of the Frame.
5.Position the Base (46) over the Frame (79) as shown. Insert the Wire Harness (60) into the large hole in the Right Upright (62) and out of the top.
6.Raise the Right Upright (62) and the Left Upright (not shown) so the Base (46) is flat on the floor. Make sure that the upper end of the Wire Harness (not shown) does not fall into the Right Upright.
With the help of a second person, lift and hold the Frame (79) between the Right Upright (62) and the Left Upright (not shown). Finger tighten a Frame Bolt (70) with a Washer (66) and a 3/8" Star Washer (29) through the Right Upright and the Frame Spacer (27) and into the Frame. Do not tighten the Frame Bolt yet. Repeat this step on the left side of the treadmill.
3 |
|
66 |
|
65 |
61 |
|
|
62 |
|
|
46 |
Large |
65 66 |
|
|
Hole |
|
4 |
|
|
27 |
|
45 |
|
70 |
79 |
|
5 |
|
62 |
|
|
46 |
|
60 |
Large |
|
79 |
Hole |
6 |
|
62 |
|
|
46 |
|
29 |
|
66 |
27 |
70 |
|
|
79 |
|
7
Loading...