Ikegami ICD-525S User Manual

INSTRUCTION MANUAL

Ikegami Tsushinki Co., Ltd.

Hybrid Camera

MODEL

ICD-525S

OUTDOOR USE WARING

WARNING – TO PREVENT FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.

The apparatus shall not be exposed to
dripping or splashing and that no
objects filled with liquids, such as
vases, shall be placed on the
apparatus.

e

c

o

p

r

s

t

c

u

d

o

Thank you for choosing this Ikegami Hybrid Camera.
Please read this Instruction Manual carefully to keep your Ikegami camera at
peak performance for longer service period.
This unit is a cube-type 1 CMOS color camera and making use of a 1/2.9” sensor.
This Ikegami product is made of ECO friendly components based upon the
Company policy and corporate social responsibility to contribute towards the
Global Environmental Solution for energy conservation and environmental
sustainability, all the
Free, Non-Lead and conform with Japan's Green Product regulation, EU's RoHS
directive and other Environmental and hazardous chemical substances related
regulations and laws.

comp

onents used in this product are Non-hazardous, Toxic

Contents

Page

1. Handling Precautions ..................................................................E-1

2. General ........................................................................................E-1

3. Features .......................................................................................E-2

4. Name of each section and its function ........................................E-3

5. Operating Procedure ...................................................................E-6

5-1. User Setup ..........................................................................E-6

5-2. Names and functions of the setup buttons.........................E-6

5-3. Setup mode Procedures .....................................................E-6

6. Warranty and after-sale service ..................................................E-13

7. Specifications ..............................................................................E-14

8. External Appearance

9. Setup Flow Chart

The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.

CAUTION;

ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PART
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USERS AUTHORITY TO
OPERATE THE EQUIPMENT.

Instructions for Disposal of Electrical and Electronic Equipment in Private
Households

Disposal of used Electric and Electronic Equipment
(Applicable in the European Union and other European countries with
separated waste disposal and collection methods)

This symbol on the product, or in the related documents in the package, indicates

product shall not be treated as normal household waste. Instead, it should

that this
be taken to a proper applicable collection point or depot for the recycling of electric

By ensuring this product is disposed of correctly, you will help prevent possible negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. The recycling of materials will help to conserve natural
resources.
For more detailed information about recycling of this product, please contact your local city
authority, your household waste disposal service or the place where you purchased the product.

and electronic equipment.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any of the ventilation openings. Install in accordance with the
manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. When the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.

11) Only use the attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long
periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

15) CAUTION - These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating instructions unless you
are qualified to do so.

1. Handling Precautions

• Do not expose the internal mechanism of the camera in a water-splashed
or highly humid environment.

• Do not use the camera where the ambient temperature drops below

-10°C or rises above +50°C. The images and component parts may be
adversely affected or the camera may not function correctly.

• Do not open the case of the camera, unless it is absolutely necessary
for setup or installation because there are precision electrical and
electronic components inside and acciden

• Be sure to turn off the power before installing or making connections.

• Be careful not to drop or give a strong shock to the camera while
transporting it.

• Do not touch the image sensor

• Do not orientate the camera directly towards the sun.

• Because of the digital image device characteristics, images may look
unnatural at high temperatures, this does not mean the camera is faulty.

t may

result.

2. General

This color camera is provided with a 1/2.9-inch CMOS sensor. The CCTV
camera features wide
and is equipped with the color/black-and-white switching, back-light
compensation, automatic iris control, line lock and other functions. The
unit is best suited for general surveillance.

dynamic range, high sensitivity and high resolution,

E-1

3. Features

(1) Wide Dynamic Range (CVI,TVI,AHD)
The WDR function provides for very effective compensation of high

light and dark areas in screen. This situation may occur generally
outside or viewing from indoor to outdoor scenes. Even in large light
fluctuations, bright-and-dark subjects can be captured and viewed

clearly with a natural appearance.
(2) Small-size cube shape
The small-size cube shape of the camera allows it to be most suitable

to be installed into various devices such as ATM units.

) Hi

gh-quality picture and high resolution

(3
The camera is designed for smear-free imaging and low noise. The

well-designed DSP, Digital Signal Processor, effectively enhances

details, which achieves crisp and sharp images with a high signal-to-

noise ratio.

(4) Automatic white balance
Thanks to the automatic follow-up white balance control (ATW), the

white balance adjusts itself no matter how great the subject's color

temperature fluctuates.

(5) Automatic Sensitivity Control
In conju

nctio
system, the camera incorporates the automatic sensitivity control
function that always provides adequate and bright images even
through its fixed-iris lens.

n with the wide dynamic control by the multi-sampling

E-2

4.

Name of each section and its function

3

2

1

5

6

7

E-3

VIDEO OUT

U

D

POWER

AC24V 50/60Hz 160mA

DC12V 170mA

SET UP
R L

LENS

MAX40mA

8

E

9

4

Lens mount (CS mount)

1

4

3

2

1

4

①

This is used to mount the lens on the camera. Many types of CS mount

lens can be attached.
Back focus lock screw

②

After completing the flange back adjustment of the camera, use the

supplied Allen wrench to tighten the screw until it is fully fixed.
Holder mounting screw holes

③

These holes are used to install and fix the camera on the camera

mounting or bracket. They can be also applicable to general use tripods
which have a quarter inch thread.

Note

To use these holes to attach the camera on a tripod or other
mount, make sure you use suitable size mounting bolts as follows
(1/4” -20UNC), they should not be longer than 5.5 mm to avoid
an un-stable installation.

Auto iris lens connector

④

Specifically used to connect the auto iris lens.
Applicable connector: E4-191J-100 or equivalent

DC Iris System

— Connector cable leads —

1. Damping coil (-)

2. Damping coil (+)

3. Driving coil (+)

4. Driving coil (-)

e.

* Connect the leads as shown ab

Please refer also to the instructions of the lens to be used.

ov

3

Auto iris lens

2

Connector pin assignment

E-4

Video output terminal (VIDEO OUT)

⑤

To be used to give out the video signal. Connect this to the video input

terminal of a monitor, switcher etc. (To be terminated with 75-ohm

impedance.)

Power indicator (POWER)

⑥

The LED indicator stays on in green while the camera power is on.

DC12V/AC24V power input terminal

⑦

Keep the input power at DC10.5-15.0 V or AC24V±10%.
* This installation should be made by a qualified service person and

should conform to all local codes.

Camera setup function switches

⑧ -⑨

Please refer to the Operation Procedure chapter.

E-5

5. Operating Procedure

5-1. User Setup

This camera is provided with user setup function for picture quality, and
camera ID. The setup menu is a tree type on-screen-display.
When installing the camera it is possible to set up the various functions.

5-2. Names and functions of the setup buttons

SET UP

U

RL

D

5-3. Setup mode Procedures

Hold down the E button and the setup menu screen at left appears on screen.
A highlighted item is now selected.
Use the L/R buttons to change the selection items.

U To select setup parameters
D (up and down)
R To change setup parameters
L
E

E

To get in or get out to setup
mode, and to enter and
execute procedures.

E-6

5-3-1. MAIN MENU

When the OSD menu is launched, you are presented with the adjacent
opening screen.
A menu option followed by a indicates the presence of a sub-menu.
Options set to OFF will not show a until set to ON.
Use RETURN to the previous menu.

MAIN MENU

FOCUS ADJUST
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
ADJUST
MOTION
SYSTEM
EXIT

(1)FOCUS ADJUST

FOCUS ADJUST is a function to support focus adjustment.
A focus indicator displayed on the screen can be used to confirm
the focus conditions.

OFF
OFF

AUTO
MIDDLE
OFF

- From the Main Menu, turn the Focus ADJ from OFF to ON to create

a Focus Adjust Box on the screen’s bottom left

- Move the lens to direct towards the object to be focused, and turn the lens focus
from near to far until the location from the Focus Assist Box shows a green bar.
Next turn the lens focus until the yellow bar has a similar size with the green bar
for focus. Your camera should now have a clear crisp image.

E-7

(2)EXPOSURE

It seleccts Lens Mode, Brightness, Shutter speed, Sens-up and AGC Gain.

LENS - DC or Manual selection

①

BRIGHTNESS - Sets the level of the overall

②

SHUTTER - Auto, Manual, FLK selection, 1/30~1/30K.

③

Set this on to reduce the exposure time of each image.
This can be used to reduce blur in images with fastchanging content.
FLK mode Use this when flicker is observed in the image
underfluorescent lighting

④

SENS UP - Slows frame rate and increases low light sensitivity
AGC- Level Control -Used to adjust overall gain

⑤

EXPOSURE

LENS
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN

(3)BACKLIGHT

Setting the backlight compensation and light source correction function
are available.

WDR - Used to improve contrast in bright/dark areas

①

( NOTE : WDR function is only inactive on CVBS output.)
BLC - Adjust the area to be enhanced and sets the level

②

HLC - It is the ability to reverse bright points to black or gray,

③

(areas such as headlights, any high luminance areas) this function will
improve this function will improve the overall picture.

DC
10
AUTO
X4
10

E-8

(4)DAY & NIGHT

Selecting Day or Night is available.

AUTO - The image is automatically switched between high-quality

①

color image for the day and highly-sensitive monochrome image
for the night.
COLOR - Fixes the camera in color mode.

②

B/W - Fixes the camera in monochrome mode.

③

EXTERN - This mode which forcibly switches the Day/Night mode using

④

an external input.

(5)WHITE BALANCE

Setting a white balance is available.

①

AUTO
The camera automatically samples the image for optimum
white balance.

AUTOext(default)

②

The camera automatically samples the image for optimum white balance

in an exterior environment.

PRESET

③

Allows the white balance to be set automatically and locked. This option is
normally used when no white reference is present in the image.
To set the white balance, hold a white object in front of the camera,

with light from the source falling on it and press the joystick to set and
lock the white balance.

MANUAL

④

This option allows a selection of color temperature, Red and Blue gain
to be manually set in the image. Note, using this option requires care to

ensure all cameras on one system have the same color response.

WHITE BAL

AWB
RETURN

AUTOext

E-9

(6)DNR(Digital Noise Reduction)

This function is used to improve the picture quality by filtering the noise
which is generated under low light conditions.

(7)ADJUST

Color gain, sharpness, gamma, mirror, flip, ace, defog and privacy are
available.

COLOR GAIN

①

It adjusts the color intensity.

SHARPNESS

②

It adjusts the edge intensity of the video.

GAMMA

③

This function is for compensating the saturation and brightness of

the images shown on the display.

MIRROR

④

It flips the video vertically.

⑤

FLIP

It flips the video horizontally.

ACE(Adaptive contrast enhancer)

⑥

Preserves fine details, reduces artifacts and loss of local contrast

in the image areas of bright/dark.

⑦

DEFOG

Used to help improve the captured image in poor weather conditions
such as smog, fog, or smoke. It automatically controls contrast ratio

by spatially analyzing the histogram characteristics.

⑧

PRIVACY

The maximum 16 privacy masks can be set.
Setting mask color, intensity, and size are available.

ADJUST

COLOR GAIN
SHARPNESS
GAMMA
MIRROR
FILP
ACE
DEFOG
PRIVACY
RETURN

15

0.5
OFF
OFF
OFF
OFF

E-10

(8)MOTION

ON

MOTION OSD

This function detects and dispalys the object in motion.

DET WINDOWS

①

Select and set up to 4 motion areas

SENSITIVITY

②

Level control

TEXT ALARM

③

Display “Motion Alarm” on Screen

SIGNAL OUT - N/A

④

MOTION

DET WINDOWS
DET TONE
MDDECT FILL
SENSITIVITY

TEXT ALARM
SIGNAL OUT
RETURN

2
ON
5

ON
OFF

E-11

(9)SYSTEM

p

OUTPUT

①

CVBS(default), CVI, TVI, AHD Selectable
FRAME RATE

②

Select from 1080P - 30P or 720P - 30P or 720 - 60P
FREQ

③

60Hz or 50Hz can be seleted.
COM

④

Set com port and speed
IMAGE RANGE

⑤

Used to adjust black level in dark sceen
COLOR BAR

⑥

Vertical flip of image
LANGUGE

⑦

Select from 5 languages(ENG, CHN, CHN(s), JPN, KOR)

CAMERA TITLE

⑧

The screen can display 8 characters
RESET

⑨

It returns to the factory default

OUTPUT
FRAME RATE
FREQ
COM
Image range
COLOR BAR
LANGUAGE
CAMERA TITLE
RESET
RETURN

SYSTEM

1080-30
60Hz

FULL
OFF
ENG
OFF
ON

E-12

OUTPUT

HD ANALOG
RETURN

CVBS

6. Warranty and after-sale service

A warranty accompanies this product. Read and fill out the warranty card
that you have received at your dealer. Keep this card in a safe place.

●Please consult Ikegami Electronics (U.S.A.) Inc. or Ikegami Electronics
(Europe) GmbH o r your dealer for full warranty information. Your dealer
will repair or replace free of charge within the warranty period according
to the warranty coverage.

●For repairs after the expiration of
dealer or sales representative. It will first be judged whether the fault is
repairable or not. Charged servicing will then be made upon request of
the user.

●Before you ask for servicing, please ensure you read the Instruction
Manual. If the unit still fails, take note of the model number, date of
purchase, problem, etc. in detail, and inform your dealer or sales
representative.

●If you have que
or sales representative.

* We suggest you ask for preventive inspection as soon as possible.

stions about the after-sale service, contact your dealer

the warranty period, consult your

E-13

7.

(1) Image Sensor:
(2) HD Resolution:
(3) Scanning system:
(4) Sync system:
(5) Video output:

(6) Day/Night switching:
(7) S/N ratio:
(8) Minimum object illumination:
(9) Wide Dynamic Range:
(10) AGC:
(11) Eletronic shutter:

(12) White Balance Control:
(13) Digital Noise Reduction:
(14) ACE:
(15) DEFOG:
(16) Private Mask Setting:
(17) Camera ID:

(18) Motion Detection:
(19) Operating Temperature
and Relative humidity:

(20) Lens mount:

(21) Auto iris function:
(22) Lens flange back adjustment:
(23) Power Requirement:

(24) Power consumption:

2Mega Pixel Cmos Sensor
Full HD (1920 x 1080)
16:9 Progressive scan
Internal
Analog Output-CVBS(default)
HD Output-CVI,TVI,AHD(Full HD)
Digital Day/Night
Over 52dB(p-p/rms)

0.08Lx at B/W at Sens up<<off>>
Support (1080p@15fps)
ON/OFF(Variable)
Auto, Manual, Flicker,
1/30,000 sec maxiam

AUTOext/AUTO/PRESET/MANUAL

Built-in, On or OFF, Selectable
Built-in, On or OFF, Selectable
Built-in, On or OFF, Selectable
Built-in, Up to 16 areas
1 Line, up to 8 characters
(alphanumeric)
Built-in, On or OFF, Selectable

°

-10 to + 50
RH 30% to 90%(no condensation)

CS mount (C-mount adapter attachment
possible)

Compatible with DC iris
Built-in
AC 24 V±10%(50/60Hz)
DC 12 V (+10.5V ~ +15V)

2.0W

C

E-14

(25) Outer dimensions:

(26) Weight:
(27) Input/Output connectors:

52(W)×52(H)×55(D) mm
(no protrusion included)
Approx. 350g

• VIDEO OUT BNC

• LENS 4P(E4-191J-100 or equivalent)

• DC 12V/AC 24V input;2-pin terminal block

(28) Supplied accessories:

Instruction Manual
Allen wrench (for flange back adjustment)
Power input connector

* Specifications and design are subject to change for product improvements
without notice.

E-15

2-1/4”-20UNC

LABEL

52 6.5

8.

External Appearance

52 55

16 14

VIDEO OUT

POWER

AC24V 50/60Hz 160mA

DC12V 170mA

U

D

SET UP
RL

LENS

MAX40mA

E

9. Setup Flow Chart

1/30-1/30000

0-20

OUTDOOR

DEBLUR

INDOOR

X2 / X4 / X8

/ X16 / X32

3RD

0801-0SOP_V

0-1080

0-3

ON

OFF

0-1920

0-1920

0-20R-GAIN

0-20

3000K/5000K/8000K

ND2POT

L R U D E L R U D E

EDIWAERA SUCOFNOTSUJDA SUCOF

+SET

L R U D E L R U D E L R U D E L R U D E

SETUP MENU

NARROW

MIDDLE

PUSH SET

FOR A WHILE

2-0ENOT PSIDFFO

0-34

0-60

DISP H_POS

DISP V_POS

0-34

0-60

DISP H_SIZE

DISP V_SIZE

CDSNELERUSOPXE

+SET

MANUAL

BRIGHTNESS

H_POS

WHT

CUSTOMER

WINDOW USE

WINDOW ZONE

H_SIZE

V_SIZE

LAMRONEDOMRDW

02-0EZIS_H

02-0EZIS_V

02-0SOP_V

02-0SOP_HCLB

BLU

RED

MAG

GRN

CYN

YEL

+SET

02-0NIGAM-CGA

0-20

0-20

0-10DELAY

ROI

LOW

HIGH

MIDDLE

TAS-ITNAOTUATHGIN&YAD

WEIGHT

AGC-THRES

+SET

+SET

MODE

TES+TES+

+SET

OTUARETTUHS

MANUAL

FLICKER

OFF

SENS-UP

01-0CGA

02-0LEVELCLHTHGILKCAB

KLBROLOC

ON

+SET

COLOR

0-20ANTI-SAT

+SET

B&W

02-0TAS-ITNANRETXE

+SET

LOW

HIGHEXTERN SW

0-10DELAY

C-TEMP

B-GAIN

+SET

+SET

MANUAL

PRESET

AUTO

OFFDNR

HIGH

MIDDLE

LOW

+SET

WHITE BAL AUTO EXTAWB

0-20

COLOR GAINADJUST

0-10

0-10

CVI

CVBS

0.45 / 0.5 / 0.6ONOFFFLIPONOFFMIRROR

+SET

GAMMA

SHARPNESS

0-10

TVI

0.65 / 0.7

06-0SOP_H

0-10

MANUAL

AHD

LOW

OFFACE

AUTO

MIDDLE

OFF

ON

HIGH

MIDDLE

LOW

0-15ZONE NUMON

MODE

LEVEL

ZONE DISP

+SET

+SET

ON

OFF

HIGH

OFF

DEFOG

PRIVACY

0-3TRANS

0-20CR LEVEL

0-20CB LEVEL

0-20Y LEVEL

0-34V-SIZE

0-60H-SIZE

0-34

0-60

V-POS

H-POS

ON

WINDOW USE

WINDOW ZONE 0-3

TES+TES+

WODNIW TEDNO

43-0EZIS_V

OFF

0-34

0-60H_SIZE

V_POS

ONMDRECT FILL

0-4DET TONE

0-10

OFF

SENSITIVITY

ONTEXT ALARM

OFF

ONMOTION OSD

CVBS

CVI

OFF

OFF

SIGNAL OUT

TVI

AHD

/57600/115200

2400/4800/9600

0-255

ON

0-32USER

+SET

HD ANALOGOUTPUT

BAUDRATE

CAM ID

SET DONE

COMP

FULLIMAGE RANGE

+SET

ON

OFFCOLOR BAR

FFOELTIT MAC

RIGHT UP

JPN/KOR

ENG/CHN/CHN(S)

LANGUAGE

+SET

LEFT DOWN

+SET

RESET

2DN

+SET

+SET

zH05 / zH06QERF

p03 0801EMARF

ON

720 60p

720 30p

+SET

+SET

COM

FFONOITOM

+SET

SYSTEM

CANCLE

SAVE

EXIT

TOP 3RD

Ikegami Electronics (U.S.A.), Inc.

■

300 Route 17 South, Mahwah, NJ 07430, U.S.A.
Phone: [phone], FAX [phone]
www.Ikegami.com

Ikegami Electronics (Europe) GmbH

■

Ikegami Strasse 1, D-41460 Neuss, Germany
Phone : [phone], FAX [phone]
www.Ikegami.de

Ikegami Electronics U.K. Office:

■

Unit E1, Cologne Court, Brooklands Close,
Windmill Road, Sunbury-on-Thames,
Middlesex, TW16 7EB, U.K.
Phone:[phone] FAX [phone]
www.Ikegami.co.uk

or

Ikegami Tsushinki Co., Ltd.