Iiyama B2403WS User Manual

0 (0)
Iiyama B2403WS User Manual

USER MANUAL

Thank you very much for choosing the iiyama LCD monitor.

We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.

ENGLISH

DEUTSCH

FRANCAIS

NEDERLANDS

ITALIANO

POLSKI

PLB_E2403WS-e-M021B01.P65

1

2007/09/11, 9:45

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENGLISH

Congratulations!

The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.

Some of the features of the TCO’03 Display requirements:

Ergonomics

Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability.

Energy

Energy-saving mode after a certain time – beneficial both for the user and the environment

Electrical safety

Emissions

Electromagnetic fields

Noise emissions

Ecology

The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001

Restrictions on

o chlorinated and brominated flame retardants and polymers o heavy metals such as cadmium, mercury and lead.

The requirements included in this label have been developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more userfriendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world.

For more information, please visit

www.tcodevelopment.com

PLB_E2403WS-e-M021B01.P65

2

2007/09/03, 9:54

FCC DECLARATION OF CONFORMITY

Model Number:

PL2400

Trade Name:

iiyama

Responsible party:

Ampronix Inc.

Address:

8697 Research Dr. Irvine, CA.92618 U.S.A.

Telephone number:

949-788-9930

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for Class B Personal Computers and peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the device is operated in a residential environment. This device generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If you determine the device does cause harmful interference to radio or television reception (this may be determined by monitoring the interference while turning the device off and on), you are encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the device and receiver.

Connect the device into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio or TV technician for help.

To meet the FCC requirements, you should use a signal cable with ferrite core at both ends.

CAUTION Changes or modifications not expressly approved by IIYAMA could void the users authority to operate the device under FCC compliance regulations.

ENGLISH

CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE STATEMENT

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulation of the Canadian department of communications.

CE MARKING DECLARATION OF CONFORMITY

This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/ EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.

The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.

We reserve the right to change specifications without notice.

All trademarks used in this user manual are the property of their respective owners.

As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

PLB_E2403WS-e-M021B01.P65

3

2007/09/03, 9:54

ENGLISH

TABLE OF CONTENTS

 

FOR YOUR SAFETY ...........................................................................................

1

SAFETY PRECAUTIONS ..............................................................................

1

SPECIAL NOTES ON LCD MONITORS ..........................................................

3

CUSTOMERSERVICE ...................................................................................

3

CLEANING ....................................................................................................

3

BEFOREYOU OPERATE THE MONITOR .............................................................

4

FEATURES ....................................................................................................

4

CHECKINGTHE CONTENTS OF THE PACKAGE ..........................................

4

FITTINGAND REMOVAL OF BASE ..............................................................

5

CONTROLSAND CONNECTORS .................................................................

6

CONNECTING YOUR MONITOR ...................................................................

7

COMPUTERSETTING ....................................................................................

8

ADJUSTING THE HEIGHTAND THE VIEWINGANGLE : ProLite B2403WS ..

8

ADJUSTING THE VIEWINGANGLE : ProLite E2403WS ...............................

9

PANEL ROTATION : ProLite B2403WS .........................................................

9

OPERATINGTHE MONITOR ................................................................................

10

ADJUSTMENTMENUCONTENTS .................................................................

11

SCREENADJUSTMENTS ..............................................................................

16

POWER MANAGEMENTFEATURE ...............................................................

19

TROUBLE SHOOTING .........................................................................................

20

RECYCLING INFORMATION ................................................................................

21

APPENDIX ...........................................................................................................

22

SPECIFICATIONS : ProLite B2403WS ...........................................................

22

SPECIFICATIONS : ProLite E2403WS ...........................................................

23

DIMENSIONS : ProLite B2403WS .................................................................

24

DIMENSIONS : ProLite E2403WS .................................................................

24

CONNECTORPINASSIGNMENT ...................................................................

25

COMPLIANTTIMING ......................................................................................

25

Regulatory information : The high efficiency LCD backlights used in this product contains 5mg or less of Mercury, the disposal of which may be regulated due to environmental considerations.

For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org).

This information is only for U.S.A..

We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com

You can access the Web page of different countries from there.

PLB_E2403WS-e-M021B01.P65

4

2007/10/05, 9:14

FOR YOUR SAFETY

SAFETY PRECAUTIONS

WARNING

STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE

If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock.

NEVER REMOVE THE CABINET

High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.

DO NOT PUT ANY OBJECT INTO THE MONITOR

Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause fire, electric shock or damage.

INSTALL THE MONITOR ON A FLAT, STABLE SURFACE

The monitor may cause an injury if it falls or is dropped.

DO NOT USE THE MONITOR NEAR WATER

Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric shock.

OPERATE UNDER THE SPECIFIED POWER SUPPLY

Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will cause malfunction and may cause fire or electric shock.

PROTECT THE CABLES

Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables. If damaged, the cables may cause fire or electric shock.

ADVERSE WEATHER CONDITIONS

It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause electric shock.

ENGLISH

FOR YOUR SAFETY 1

PLB_E2403WS-e-M021B01.P65

5

2007/09/03, 9:54

ENGLISH

CAUTION

INSTALLATION LOCATION

Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor.

DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION

The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury.

MAINTAIN GOOD VENTILATION

Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls. Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also cause damage.

DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR

When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.

UNPLUG THE MONITOR

If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.

HOLD THE PLUG WHEN DISCONNECTING

To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause fire or electric shock.

DO NOT TOUCH THE PLUG WITH WET HANDS

Pulling or inserting the plug with wet hands may cause electric shock.

WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER

Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your computer.

DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS

Magnetically recorded data, such as on a floppy disk, may become corrupted by the magnetic field produced by the speakers if the disks are placed on or near the speakers.

OTHERS

ERGONOMIC RECOMMENDATIONS

To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is recommended as looking at the screen continuously can cause eye strain.

2 FOR YOUR SAFETY

PLB_E2403WS-e-M021B01.P65

6

2007/09/03, 9:54

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitors and do not indicate a problem.

NOTE

When you first turn on the LCD monitor, the picture may not fit in the display area

 

because of the type of computer that is used. In this case, adjust the picture

 

position to the correct position.

Due to the nature of the backlight, the screen may flicker during initial use. Turn off

 

 

the Power Switch and then turn it on again to make sure the flicker disappears.

 

You may find slightly uneven brightness on the screen depending on the desktop

 

 

pattern you use.

ENGLISH

 

this case, the screen is recovered slowly by changing the image or turning off the

 

Due to the nature of the LCD screen, an afterimage of the previous screen may

 

remain after switching the image, when the same image is displayed for hours. In

Power Switch for hours.

Contact your dealer or iiyama service center for the backlight replacement when the screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.

CUSTOMER SERVICE

NOTE

The fluorescent light used in the LCD monitor may have to be periodically replaced.

 

For the warranty coverage on this component, please check with local iiyama

 

service center.

If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging.

CLEANING

WARNING If you drop any materials or liquids such as water into the monitor when cleaning, unplug the power cable immediately and contact your dealer or iiyama service center.

CAUTION For safety reasons, turn off the power switch and unplug the monitor before you clean it.

NOTE

To protect the LCD panel, do not scratch or rub the screen with a hard object.

Never use any of the following strong solvents. These will damage the cabinet and the LCD screen.

Thinner

Spray-type cleaner

Benzine

Wax

Abrasive cleaner Acid or Alkaline solvent

Touching the cabinet with any product made from rubber or plastic for a long time may cause degeneration or loss of paint on the cabinet.

CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then wipe the cabinet with a soft dry cloth.

LCD Periodic cleaning with a soft dry cloth is recommended.

SCREEN Don't use tissue paper etc. because these will damage the LCD screen.

FOR YOUR SAFETY 3

PLB_E2403WS-e-M021B01.P65

7

2007/09/03, 9:54

ENGLISH

BEFORE YOU OPERATE THE MONITOR

FEATURES

61.2cm (24.0") TFT Color LCD Monitor

Supports Resolutions up to 1920 × 1200

High Contrast 2000:1 (DCR) / Brightness 300cd/m2 /

Quick Response Time 2ms (Gray to Gray) : ProLite B2403WS

High Contrast 2000:1 (DCR) / Brightness 250cd/m2 /

Quick Response Time 2ms (Gray to Gray) : ProLite E2403WS

Digital Character Smoothing

Automatic Set-up

Stereo Speakers

2 × 2W Stereo Speakers

Plug & Play VESA DDC2B Compliant Windows® 95/98/2000/Me/XP/Vista Compliant

Power Management (ENERGY STAR® VESA DPMS Compliant)

Ergonomic Design: TCO ’03 and MPR 3Approved

Digital Input (HDMI) for Clear Display

90° Panel Rotation Design : ProLite B2403WS

VESA Mounting Standard (100mm×100mm) Compliant

Keyhole for Security Lock

CHEKING THE CONTENTS OF THE PACKAGE

The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.

Power Cable*

D-Sub Signal Cable

DVI-HDMI Cable

Audio Cable

Stand

User Manual

CAUTION * The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a power supply higher than this rating, then a power cable with a rating of 10A/ 250V must be used.However, all guarantees and warranties are void for any problems or damage caused by a power cable not supplied by iiyama.

4 BEFORE YOU OPERATE THE MONITOR

PLB_E2403WS-e-M021B01.P65

8

2007/09/03, 9:54

FITTING AND REMOVAL OF BASE

The monitor is supplied complete with a stand. If you prefer to wall mount the monitor, please follow the instructions below to remove the stand. Be sure to include the stand with the monitor if it is necessary to return the unit.

CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.

Do not give a strong impact to the monitor. It may cause damage.

Unplug the monitor before removal or installation to avoid electric shock or damage.

ProLite B2403WS

<Installation>

APut a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.

BInsert stand into the monitor as shown in figure as action ‘2’.

CTo secure stand, gently lower base as shown in figure as action ‘3’ until stand locks.

ProLite E2403WS

<Installation>

APut a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.

BThe Stand-Bottom is pulled up as shown in the figure.

CInstall the Stand-Base to the Stand-Bottom.

<Remove>

A Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.

BPress release button as shown in figure as action ‘2’.

CKeeping release button pressed, lift base as shown in figure as action ‘3’.

DRemove the stand.

<Remove>

A Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.

B Hold down the hooks outside and pull the Stand-Base away from the Stand-Bottom.

ENGLISH

BEFORE YOU OPERATE THE MONITOR 5

PLB_E2403WS-e-M021B01.P65

9

2007/09/03, 9:54

Loading...
+ 21 hidden pages