USER MANUAL
Thank you very much for choosing the iiyama LCD monitor.
We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
DEUTSCH
FRANCAIS
NEDERLANDS
ENGLISH
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
•Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability.
Energy
•Energy-saving mode after a certain time – beneficial both for the user and the environment
•Electrical safety
Emissions
•Electromagnetic fields
•Noise emissions
Ecology
•The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001
•Restrictions on
o chlorinated and brominated flame retardants and polymers o heavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more userfriendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
FCC DECLARATION OF CONFORMITY
Model Number: |
PL2201W / PL2202W |
Trade Name: |
iiyama |
Responsible party: |
Ampronix Inc. |
Address: |
8697 Research Dr. Irvine, CA.92618 U.S.A. |
Telephone number: |
949-788-9930 |
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for Class B Personal Computers and peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the device is operated in a residential environment. This device generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If you determine the device does cause harmful interference to radio or television reception (this may be determined by monitoring the interference while turning the device off and on), you are encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio or TV technician for help.
To meet the FCC requirements, you should use a signal cable with ferrite core at both ends.
CAUTION Changes or modifications not expressly approved by iiyama could void the users authority to operate the device under FCC compliance regulations.
CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE STATEMENT
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulation of the Canadian department of communications.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/ EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.
We reserve the right to change specifications without notice.
All trademarks used in this user manual are the property of their respective owners.
As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
ENGLISH
ENGLISH
TABLE OF CONTENTS |
|
FOR YOUR SAFETY ..................................................................................... |
1 |
SAFETY PRECAUTIONS ........................................................................ |
1 |
SPECIAL NOTES ON LCD MONITORS .................................................... |
3 |
CUSTOMERSERVICE ............................................................................. |
3 |
CLEANING .............................................................................................. |
3 |
BEFOREYOU OPERATETHE MONITOR ....................................................... |
4 |
FEATURES .............................................................................................. |
4 |
CHECKING THE CONTENTS OF THE PACKAGE .................................... |
5 |
FITTING AND REMOVAL OF BASE : ProLite E2201W ........................... |
6 |
FITTING AND REMOVAL OF BASE : ProLite E2202WS / E2202WSV ... |
6 |
CONTROLSAND CONNECTORS : ProLite E2201W .............................. |
7 |
CONTROLS AND CONNECTORS : ProLite E2202WS / E2202WSV ...... |
8 |
CONNECTING YOUR MONITOR : ProLite E2201W ................................. |
9 |
CONNECTING YOUR MONITOR : ProLite E2202WS / E2202WSV ........ |
10 |
COMPUTERSETTING .............................................................................. |
11 |
ADJUSTING THE VIEWINGANGLE ........................................................ |
11 |
OPERATINGTHE MONITOR .......................................................................... |
12 |
ADJUSTMENT MENU CONTENTS ........................................................... |
13 |
SCREENADJUSTMENTS ........................................................................ |
21 |
POWER MANAGEMENTFEATURE ......................................................... |
24 |
TROUBLE SHOOTING ................................................................................... |
25 |
APPENDIX ..................................................................................................... |
27 |
SPECIFICATIONS : ProLite E2201W ....................................................... |
27 |
SPECIFICATIONS : ProLite E2202WS ..................................................... |
28 |
SPECIFICATIONS : ProLite E2202WSV .................................................. |
29 |
DIMENSIONS : ProLite E2201W .............................................................. |
30 |
DIMENSIONS : ProLite E2202WS / E2202WSV ....................................... |
30 |
COMPLIANTTIMING ................................................................................ |
31 |
CONNECTORPINASSIGNMENT ............................................................. |
32 |
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE Hg RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS.
For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org).
This information is only for U.S.A..
We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com
You can access the Web page of different countries from there.
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause electric shock.
ENGLISH
FOR YOUR SAFETY 1
ENGLISH
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls. Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your computer.
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS (For ProLite E2202WS / E2202WSV)
Magnetically recorded data, such as on a floppy disk, may become corrupted by the magnetic field produced by the speakers if the disks are placed on or near the speakers.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is recommended as looking at the screen continuously can cause eye strain.
2 FOR YOUR SAFETY
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE |
When you first turn on the LCD monitor, the picture may not fit in the display area |
|
because of the type of computer that is used. In this case, adjust the picture |
|
position to the correct position. |
Due to the nature of the backlight, the screen may flicker during initial use. Turn off |
|
|
|
the Power Switch and then turn it on again to make sure the flicker disappears. |
|
|
|
You may find slightly uneven brightness on the screen depending on the desktop |
|
|
|
pattern you use. |
ENGLISH |
||
Due to the nature of the LCD screen, an afterimage of the previous screen may |
|||
|
|
||
remain after switching the image, when the same image is displayed for hours. In |
|
|
|
this case, the screen is recovered slowly by changing the image or turning off the |
|
|
|
Power Switch for hours. |
|
|
|
|
|
||
Contact your dealer or iiyama service center for the backlight replacement when the |
|
|
|
|
|
||
screen is dark, flickering or not lighting up. Never attempt to replace it by yourself. |
|
|
|
CUSTOMER SERVICE
NOTE |
The fluorescent light used in the LCD monitor may have to be periodically replaced. |
|
For the warranty coverage on this component, please check with local iiyama |
|
service center. |
If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging.
CLEANING
WARNING If you drop any materials or liquids such as water into the monitor when cleaning, unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
NOTE
For safety reasons, turn off the power switch and unplug the monitor before you clean it.
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and the LCD screen.
Thinner |
Spray-type cleaner |
Benzine |
Wax |
Abrasive cleaner |
Acid or Alkaline solvent |
Touching the cabinet with any product made from rubber or plastic for a long time may cause degeneration or loss of paint on the cabinet.
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then wipe the cabinet with a soft dry cloth.
LCD Periodic cleaning with a soft dry cloth is recommended.
SCREEN Don't use tissue paper etc. because these will damage the LCD screen.
FOR YOUR SAFETY 3
BEFORE YOU OPERATE THE MONITOR
FEATURES
ProLite E2201W : 56cm (22") TFT Color LCD Monitor
ProLite E2202WS / E2202WSV : 55cm (22") TFT Color LCD MonitorSupports Resolutions up to 1680 × 1050
High Contrast 2000:1(DCR) / High Brightness 300cd/m2 / Quick Response Time 2ms (Gray to Gray): ProLite E2201W
ENGLISH |
High Contrast 2000:1(DCR) / High Brightness 300cd/m2 |
: ProLite E2202WS / |
|
||
|
E2202WSV |
|
|
Multi-Color Control |
|
|
Supports sRGB International Standard |
|
|
|
|
|
Gamma Control |
|
|
Clear Display for Moving Pictures & Photographs |
|
|
Digital Character Smoothing |
|
|
Automatic Set-up |
|
|
Stereo Speakers: ProLite E2202WS / E2202WSV |
|
|
2 × 2W Stereo Speakers |
|
|
Economy Mode |
|
|
Reduced Power Consumption |
|
|
Plug & Play VESA DDC2B Compliant |
|
|
Windows® 95/98/2000/Me/XP/Vista Compliant |
|
|
DDC/CI Compliant |
|
Screen adjustments can be made from your computer by using the compliant software (softOSM).
Power Management (ENERGY STAR® and VESA DPMS Compliant)
Ergonomic Design
TCO ’03 and TÜV-Ergonomics Approved
Digital Input (DVI-D, HDCP Compliant) for Clear Display : ProLite E2201W / E2202WSVESA Mounting Standard (100mm×100mm) Compliant
4 BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.
Power Cable*1 |
D-Sub Signal Cable |
DVI-D Signal Cable*2 |
Audio Cable*3 |
Stand |
Cable Holder |
User Manual |
|
|
|
|
|
CAUTION |
*1 |
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using |
|
|
a power supply higher than this rating, then a power cable with a rating of 10A/ |
|
|
250V must be used. |
|
|
However, all guarantees and warranties are void for any problems or damage |
|
|
caused by a power cable not supplied by iiyama. |
*2 |
Accessory for ProLite E2201W / ProLite E2202WS |
|
*3 |
Accessory for ProLite E2202WS / ProLite E2202WSV |
|
<softOSM>
The Desktop softOSM software complies with the DDC/CI standard and can be downloaded from the iiyama website.
www.iiyama.com
softOSM Software Functions
Easy access to the range of user adjustments can be via the softOSM Software rather than the buttons located on the display itself.
The communication between software and display occurs through the Display Cable provided; hence no special cabling is required.
Compatible with Windows 98, 2000, XP and Vista.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
FITTING AND REMOVAL OF BASE : ProLite E2201W
CAUTION Install the stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
<Install>
Hold the monitor and push the post down into the stand.
ENGLISH
<Remove>
Press the stopper at the back of the stand and remove the stand from the post.
Press the stopper
Stand
FITTING AND REMOVAL OF BASE : ProLite E2202WS / E2202WSV
CAUTION Install the stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
<Install>
Hold the monitor and push the post down into the stand.
<Remove>
Press the stopper at the back of the stand and remove the stand from the post.
Press the stopper
Stand
6 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : ProLite E2201W
<Front> |
<Back> |
APower Switch ( 
)
BMenu Button (MENU)
C+ Button ( + )
D– Button ( – )
EAuto Button (AUTO)
FInput Button (SOURCE)
GPower Indicator
NOTE Blue: Normal operation
Orange: Power Management
Auto (Signal Select)
When no signal is received from the system, the display enters into its Power Management Mode reducing power consumption to < than 2W.
Analog / Digital (Signal Select)
The monitor enters into power management mode which reduces the power consumption to less than 2W when receiving no horizontal and/or vertical sync signal.
HD-sub mini 15pin Connector (D-SUB)
IDVI-D 24pin Connector (DVI-D)
JKeyhole for Security Lock
NOTE You can fasten a security lock and cable to prevent the monitor from being removed without your permission.
K AC Connector (AC IN)
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
Loading...