Model iPL10
stereo alarm clock to charge your iPod or iPhone
QUESTIONS? Visit www.ihomeaudio.com
W E L C O M E
Thank you for choosing the iPL10 from iHome. This user guide will get you up and running quickly and provide helpful hints to maximize enjoyment. For more information about this and other iHome products, please visit www.ihomeaudio.com Note that details on using iHome apps with this unit are not covered in this booklet. For information on using iHome apps, please visit www.ihomeaudio.com/apps
G E T T I N G S T A R T E D
This unit ships with the following items. Please check to see that all items are present.
1iPL10 speaker system
2100-240V Universal AC power adaptor
1 |
2 |
1
F E A T U R E S & F U N C T I O N S
Top panel
Backrest
Lightning Dock |
Play/Pause/ |
Presets Button |
Volume Control |
Buttons |
Power On/Off |
Button |
Mode Button |
Lightning Dock
–/+ Settings Buttons
Time Set/Sleep button
Alarm button
USB Play/Pause Button
Snooze/Dimmer Button
Back panel
DC Jack USB dock
Display
Time Display
Volume Indicator |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Alarm |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PM Indicator |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Indicator |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
iPod |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Indicator |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WAKE-TO Indicator |
|
Sleep Indicator |
|
|
|
|
|
|
|
|
|
||
(iPod/Buzzer) |
|
|
|
|
|
|
|
Low |
|
Backup Battery Indicator |
|||
|
|
|
|
2
C O N N E C T I N G T O A C P O W E R
This unit operates on AC power using the included 100V-240V universal AC adaptor for charging and playing your iPhone or iPod. Place unit on a stable surface. Plug the power adaptor into the DC jack on back of the unit and the other end into a working wall socket. You can now charge your iPhone or iPod.
B A C K U P B A T T E R Y
The iPL10 ships with a CR2450 battery installed for backup to provide continuous alarm operation and clock settings in the event of a power failure.
Remove the pull tab from the battery compartment on the bottom of the unit before use. If a power failure occurs or the AC cord is accidentally disconnected, the display backlight will not remain lit, but current time and alarm time settings will be temporarily maintained. Otherwise, you must reset the time and alarm settings.
Note: The Battery Low icon is located at the right side of clock display. When the backup battery is low and needs to be replaced, the Battery Low icon will flash. To replace, follow steps below:
3
B A C K U P B A T T E R Y ( C O N T I N U E D )
1.Please make sure the AC adaptor is connected. Otherwise all settings may be lost during battery replacement.
2.Use a Phillips screwdriver to open the backup battery compartment door located on the bottom of the unit.
3. Remove the exhausted battery. Insert a new CR2450 battery by easing it under the tabs in the battery well and pressing down. Make sure the side marked + is facing up.
4. Close the battery compartment door and tighten the battery door screw.
Note: Make sure you dispose of battery properly (see your local regulations).
WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal.
4