INSTRUCTIONS
CLONING CABLES
OPC-478UC OPC-966U
OPC-1122U OPC-1862
OPC-2338 OPC-2344
IMPORTANT
READ ALL INSTRUCTIONS carefully and thoroughly before using the cloning cable.
SAVE THESE INSTRUCTIONS! — These instructions contain important safety and operating details for the cloning cable.
EXPLICIT DEFINITIONS
WORD |
DEFINITION |
CAUTION Equipment damage may occur.
If disregarded, inconvenience only. NOTE No risk of personal injury, ire or
electric shock.
SUPPLIED ITEMS
OPC-478UC |
OPC-966U |
OPC-1122U |
|
|
OPC-2344 |
|
|
Ferrite EMI filter |
OPC-1862 |
OPC-1637 |
CD |
OPC-2338 |
|
|
Thank you for purchasing one of the OPC-478UC/ OPC-966U /OPC-1122U /OPC-1862/OPC-2338 / OPC-2344 CLONING CABLE. The cloning cables are designed to connect an Icom transceiver/receiver and a PC for data cloning using Icom cloning software.
Please read these instructions thoroughly before using the cloning cable.
PRECAUTIONS
CAUTION: USE ONLY INDOORS! NEVER expose the data cable to rain, snow or any liquids.
NEVER let metal, wire, or other objects touch any internal part of the connectors.
CAUTION: NEVER use a USB cable other than the
OPC-1637. DO NOT extend the USB cable. When the cable longer than 1.5 m (4.9 ft) is used, a data
error may occur.
DO NOT use harsh solvents such as benzine or alcohol when cleaning, as they will damage the cables.
Ensure that your PC supports USB port operation by conirming the Universal Serial Bus controller is in the PC’s Device Manager.
Connect the cloning cable to the PC’s USB port directly, or to a self-powered USB hub.
Approximately 20 mA of current is required for the cloning cable. Insuficient current capacity of the USB
port can cause unstable cloning operation and a data error.
D Cloning software compatibility
The USB type cloning cables, OPC-478UC/OPC-966U/ OPC-1122U, are almost the same as the RS-232C type cloning cables, OPC-478/OPC-966/OPC-1122. Therefore, most of the Icom cloning software which
require the RS-232C type cables can be used with
USB type cables.
IMPORTANT: Some Icom cloning software can only select ports 1 to 4. When several peripheral equipment, such as a printer, scanner and hard-disk drive are connected to the USB port, the port number avail-
able for the cloning software may be port 5 or higher.
Therefore, you cannot choose the proper port number.
SPECIFICATIONS
• Usable temperature range: |
|
||
|
OPC-2338/OPC-2344 |
0˚C to +60˚C |
|
|
|
|
(+32˚F to +140˚F) |
|
Others |
|
–10˚C to +60˚C |
|
|
|
(+14˚F to +140˚F) |
• Cable length (approximately): |
|
||
|
OPC-478UC |
|
520 mm (20.5 inches) |
|
Others |
|
250 mm (9.8 inches) |
|
OPC-1637 (USB cable) |
1500 mm (4.9 feet) |
|
• Weight (approximately): |
|
||
|
OPC-478UC |
40 g (1.4 oz) |
|
|
OPC-966U |
54 g (1.9 oz) |
OPC-1122U/OPC-2344 34 g (1.2oz)
OPC-1862/OPC-2338 |
57 g (2.0 oz) |
OPC-1637 (USB cable) |
49 g (1.7 oz) |
SYSTEM REQUIREMENTS
A PC with the following is required:
• Microsoft® Windows® 8.1 |
32 bit/64 bit |
Microsoft® Windows® 8 |
32 bit/64 bit |
Microsoft® Windows® 7 |
32 bit/64 bit |
Microsoft® Windows Vista® |
32 bit/64 bit |
• A USB 1.1 or 2.0 port |
|
The USB driver cannot be used with “RT” versions
of Microsoft® Windows® 8.1 and Microsoft® Win- dows® 8.
USB DRIVER INSTALLATION (STEP 1)
• When installing the USB driver, log in as the ad-
ministrator.
• These instructions are based on using Win-
dows 8.
• The displayed dialog boxes, indications or opera-
tions may differ slightly from the following instruc-
tions, depending on your operating system, system settings and its service pack level.
QMake sure Windows has completed it’s start-up, and no other applications are running.
W Insert the supplied CD into the CD drive.
EDouble click “ICOM USB DriverInstaller_B.exe” contained in the CD.
• When “User Account Control” appears, click [Yes]
to continue.
R “User Account Control” appears.
Click “Yes” to start the USB driver installation.
T“Welcome to the InstallShield Wizard for ICOM USB -to serial Ver. B” appears.
Click [Next >] to begin the installation.
Y If “Windows Security” appears, click “Install”.
U After the installation has completed, “InstallShield Wizard Complete” appears.
Click [Finish].
Click Finish
NOTE:
• After the USB driver installation has been com- pleted (Step 1), connect the cloning cable to the
PC (Step 2).
ClickNext>