ICC IC066NB050, IC066NBC50 User Manual

0 (0)
ICC IC066NB050, IC066NBC50 User Manual

50-Pair 66 Wiring Block

I N S T A L L A T I O N I N S T R U C T I O N S

Step 1: Mount an 89B mounting bracket onto a plywood wall. Note: Bracket and mounting screws are sold separately.

Step 2: Route the horizontal or backbone cables down inside the 89B mounting bracket and feed the cables out from either side.

Step 3: Snap the 66 wiring block onto the 89B mounting bracket.

Punch Down Tool with 66 cutting blade

Input

Output

 

Punch Down Tool

 

 

 

with 66 cutting blade

 

Bridging

 

 

 

 

 

 

Clip

 

Bridging Clip

 

connects

 

 

Input to

 

 

 

Output

Input

Output

Input

Output

Step 4a: Seat and terminate the input and output conductors using a punch-down tool. Use a bridging clip between the input and output IDCs to establish contact. Refer to chart below for color order.

Cover

Labels

Strips

Step 4b: Bridging clip is not necessary if output conductor is terminated on same IDC as input conductor.

Optional Accessories: Use a snap-on cover to protect terminated wires or use label strips for easy system administration.

888-ASK-4ICC

csr@icc.com

icc.com

© Copyright 2011, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved.

MSR-0396-RevD

Loading...
+ 1 hidden pages