IBM ED-X10, ED-X12 User Manual

0 (0)

Projector

ED-X10/ED-X12

User's Manual – Operating Guide

Thank you for purchasing this projector.

WARNING ►Before using this product, please read the "User's Manual - Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are described below.

WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.

CAUTION This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.

Please refer to the pages written following this symbol.

NOTE • The information in this manual is subject to change without notice.

The manufacturer assumes no responsibility for any errors that may appear in this manual.

The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent.

Trademark acknowledgment

VGA and XGA are registered trademarks of International Business Machines Corporation.

Apple and Mac are registered trademarks of Apple Computer, Inc.

VESA and SVGA are trademarks of Video Electronics Standard Association.

Windows is a registered trademark of Microsoft Corporation.

All other trademarks are the properties of their respective owners.

Language, Menu position, Blank, Start up, MyScreen, MyScreen lock, Message, Source name

Content

Content

About this manual. . . . . . . . . . 1 Content. . . . . . . . . . . . . . . . . . . 2 Projector features. . . . . . . . . . 3

Preparations. . . . . . . . . . . . . . . 3

About contents of package. . . . .3 Fastening the lens cover. . . . . .3

Part names. . . . . . . . . . . . . . . . 4

Projector . . . . . . . . . . . .4 Control buttons . . . . . . . . . 6 Remote control . . . . . . . . . 6

Setting up. . . . . . . . . . . . . . . . . 7

Arrangement. . . . . . . . . . 8 Adjusting the projector's elevator . . 9 Using the Security Bar. . . . . . 10 Connecting your devices. . . . . 11 Connecting power supply . . . . .14

Remote control.. . . . . . . . . . . 15

Putting batteries . . . . . . . . 15 Using the remote control. . . . . 16

Power on/off . . . . . . . . . . . . . . 17

Turning on the power. . . . . . .17 Turning off the power. . . . . . .17

EASY Menu. . . . . . . . . . 25

Aspect, Auto keystone Execute, Keystone, Picture mode, Brightness, Contrast, Color, Tint, Sharpness, Whisper, Mirror, Reset, Filter time, Language, Go to advanced menu

PICTURE Menu. . . . . . . . .27

Brightness, Contrast, Gamma, Color temp, Color, Tint, Sharpness, My memory

IMAGE Menu. . . . . . . . . .30

Aspect, Over scan, V. position, H. position, H. phase, H. size, Auto adjust execute

INPUT Menu. . . . . . . . . .32

Progressive, Video NR, Color space, Component, Video format, Frame lock, RGB in, Resolution

SETUP Menu. . . . . . . . . .35

Auto keystone Execute, Keystone, Whisper, Mirror, Volume, Audio

SCREEN Menu. . . . . . . . .37

Operating . . . . . . . . . . . . . . .

.

18

OPTION Menu. . . . . . . .

.

40

Adjusting the volume. . . . . .

 

.18

Auto search, Auto keystone, Auto on,

Temporarily muting the sound. . . 18

Auto off, Lamp time,Filter time,

 

 

Selecting an input signal. . . .

.

18

 

 

My button, Service, Security

 

 

Searching an input signal . . . .

 

.19

 

 

 

Maintenance.. . . . . . . . . . . . . 50

Selecting an aspect ratio. . . .

.

19

Adjusting the zoom and focus. . . 19

Lamp. . . . . . . . . . .

.

.50

Air filter . . . . . . . . . . . .52

Using the automatic adjustment feature. .20

Adjusting the position . . . . .

.

20

Other care. . . . . . . . .

.

.54

Troubleshooting. . . . . . . . . . . 55

Correcting the keystone distortions. 21

Using the magnify feature. . . .

 

.21

Related messages. . . . . .

.

.55

Freezing the screen. . . . . .

.

22

Regarding the indicator lamps. .

.

56

Temporarily blanking the screen.

. 22

Phenomena that may be easy to be

Operating the computer screen. .

 

.23

mistaken for machine defects. .

.

58

Multifunctional settings. . . . . 24

Warranty and after-service.. . . 61

Using the menu function . . . .

.

24

Specifications.. . . . . . . . . . . . 61

Projector features / Preparations

Projector features

This projector is used to project various computer signals as well as NTSC/PAL/ SECAM, Component (SD, HD) video signals onto a screen. It requires just a little space for installation and gets a large image from short distance.

High Brightness

Newly developed 200W UHB (Ultra High Brightness) lamp gives you a higher brightness image on a screen. The image can be still kept as bright and clean enough for use in bright rooms.

Low Noise

WHISPER function is available for reducing acoustic noise to realize quieter operation. It is perfect for use in low luminance rooms where low noise is more important than brightness.

Rich Connectivity

This projector has a variety of I/O ports. It can be easily connected to many signal sources like PC, DVD and so on. The rich connectivity provides you more options to make your presentation impressive.

Compact Body

Even with its many features, this projector is extremely compact and slim, which gives you more flexibility and usability to use it where you want.

Preparations

About contents of package

Please see the "Contents of package" of the "User's Manual - Quick Guide". Your projector should come with the items shown there. Contact immediately your dealer if anything is missing.

NOTE • Keep the original packing materials for future reshipment. For moving the projector, be sure to use the original packing materials. Use special caution for the lens part.

Fastening the lens cover

To avoid losing the lens cover, please fasten it the lens cap to the projector using the strap.

 

Strap ring

 

Strap

Bottom side

Strap hole

 

 

1. Fix the strap to the strap ring of the lens cover.

2. Put the strap into the groove on the rivet.

3. Push the rivet into the strap hole.

Part names

Part names

Projector

ê

Lamp cover (51) (Lamp unit is inside.)

Zoom ring (19)

Focus ring (19) Vent (7)

Lens (17)

Lens cover (3)

ê

Control buttons (6)

Remote sensor (16) Speaker

Security bar (10) (Use for attaching a commercial anti-theft chain or wire.)

Elevator button (9)

Front-Right side

Elevator foot (9)

Filter cover (52)

(Air filter and intake vent are inside.)

Bottom side

WARNING ►During use or immediately after use, do not touch around the lamp and vents of the projector. (ê) It could cause a burn.

 

 

Part names

 

 

Power switch (17)

 

 

AC inlet (14)

Ports (See below.)

 

Elevator button (9)

 

Elevator foot (9)

 

 

 

Rear-Left side

Vent (7)

 

 

 

 

 

AUDIO IN1 port (12)

 

 

 

 

(In the default setting, the AUDIO IN1 port is the audio

AUDIO IN3 L/R port (13)

 

port for the RGB IN1 port, however, it is possible to

 

change the settings. 36)

 

(In the default setting, the

 

 

 

 

 

 

AUDIO IN3 L/R port is the audio

 

RGB IN1 port (12)

 

port for the VIDEO, S-VIDEO

 

 

and COMPONENT VIDEO

 

 

 

Restart switch (*) (58)

 

ports, however it is possible to

 

 

 

 

 

 

 

 

change the settings. 36)

 

 

 

RGB IN2 port (12)

 

COMPONENT

 

 

 

 

 

RGB OUT port (12)

Y R

 

 

 

 

 

VIDEO ports (13)

 

 

 

 

 

 

 

AUDIO IN3

 

 

 

AUDIO OUT port

Y

 

 

 

 

 

 

 

 

 

RGB IN1

RGB IN2

RGB OUT AUDIO OUT

(12)

CB/PB

 

 

 

 

 

 

 

CB/PB

L

 

AUDIO IN1

 

 

 

CR/PR

 

AUDIO IN2

 

 

 

CR/PR

 

 

 

 

VIDEO port (13)

 

 

K

CONTROL

USB

 

VIDEO

 

 

 

 

 

 

 

 

 

Ports

 

S-VIDEO

 

 

 

 

 

 

 

 

 

S-VIDEO port (13)

 

 

 

 

 

USB port (12)

 

 

 

 

 

 

 

 

AUDIO IN2 port (12)

 

 

 

 

 

 

(In the default setting, the AUDIO

CONTROL port (12)

 

IN2 port is the audio port for

 

 

 

 

 

the RGB IN2 port, however, it is

Kensington lock slot

 

possible to change the settings.

 

 

 

 

36)

 

 

 

 

 

 

 

NOTE (*) About Restart switch: This projector is controlled by an internal microprocessor. Under certain exceptional circumstances, the projector may not operate correctly and the microprocessor will need to be reset. In such a case, please push the Restart switch by using a cocktail stick or similar, and before turning on again, make the projector cool down at least 10 minutes without operating. Only push the Restart switch in these exceptional instances.

Part names

Control buttons

Cursor buttons

▲,▼,◄,► (24)

STANDBY/ON button (17)

Remote control

LAMP indicator (56, 57) TEMP indicator (56, 57) POWER indicator (17)

INPUT button (18)

SEARCH button (19) RGB button (18) VIDEO button (19) ASPECT button (19) HOME button (23)

MAGNIFY

ON button (21) OFF button (21)

END button (23)

VIDEO

RGB

SEARCH

 

ASPECT

 

AUTO

BLANK

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

OFF

END

PAGE DOWN

MUTE

 

 

 

FREEZE

MY BUTTON

KEYSTONE

 

1

2

 

FREEZE button (22)

POSITION

MENU

POSITION button (20)

 

ENTER

ESC button (23)

ESC

RESET

Battery cover (15) (on the back)

STANDBY/ON button (17) AUTO button (20) BLANK button (22)

PAGE UP button (23) VOLUME button (18)

MUTE button (18) PAGE DOWN button (23)

KEYSTONE button (21) MY BUTTON button (41)

MENU button (24)

Cursor buttons

▲,▼,◄,► (24) ENTER button (24) RESET button (24)

Setting up

Setting up

WARNING ►Place the projector in a stable position horizontally. A fall or a turnover could cause an injury and/or damage to the projector. Then using damaged projector could result in a fire and/or an electric shock.

Do not place the projector on an unstable, slant or vibrant surface such as a wobbly or inclined stand.

Do not place the projector in the side/front/rear-up position, except cleaning the air filter.

►Place the projector in a cool place, and pay attention enough to ventilation. The high temperature of the projector could cause a fire, a burn and/or malfunction to the projector.

Do not stop up, block and cover the projector's vents.

Keep a space of 30 cm or more between the sides and other objects such as walls.

Do not place the projector on a metallic thing or anything weak in heat.

Do not place the projector on a carpet, cushion or bedding.

Do not place the projector in direct sunlight or near a hot object such as a heater.

Put nothing about lens and vents of the projector. Put nothing on the projector.

Put nothing that is sucked or sticks to the bottom of projector. This projector has some intake vents also on the bottom.

►Do not place the projector on the place that gets wet. Damping the projector or inserting liquid in the projector could cause a fire, an electric shock and/or malfunction to the projector.

Do not place the projector in a bathroom or the outdoors.

Put nothing containing the liquid near the projector.

CAUTION ►Avoid a smoky, humid or dusty place. Placing the projector in such place could cause a fire, an electric shock and/or malfunction to the projector.

• Do not place the projector near a humidifier, a smoking space or a kitchen. ►Adjust the direction of the projector to keep the light from directly hitting the projector's remote sensor.

Setting up

Arrangement

Refer to the illustrations and tables below to determine the screen size and projection distance.

The values shown in the table are calculated for a full size screen: 1024×768

(a) The screen size (diagonal) (b)

(b) Distance from the projector to the screen (±10%)

(c) The height of the screen (±10%)

4:3

16:9

(c) up

 

(a)

(a)

(c) down

 

 

(a) Screen

 

 

 

 

4 : 3 screen

 

 

 

 

 

 

16 : 9 screen

 

 

size

 

(b) Projection distance

 

(c) Screen height

 

(b) Projection distance

(c) Screen height

 

 

[m (inch)]

 

 

 

[cm (inch)]

 

 

 

[m (inch)]

 

 

[cm (inch)]

 

[inch (m)]

 

 

 

 

 

 

 

 

 

 

 

 

min.

max.

down

up

 

min.

max.

down

up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30

(0.8)

0.9

(34)

1.1

(41)

5

(2)

41

(16)

 

1.0

(38)

1.1

(45)

-1

(0)

39

(15)

40

(1.0)

1.2

(46)

1.4

(56)

6

(2)

55

(22)

 

1.3

(50)

1.5

(61)

-2

(-1)

51

(20)

50

(1.3)

 

1.5

(58)

1.8

 

(70)

8

(3)

69

(27)

 

1.6

(63)

1.9

(76)

-2

(-1)

64

(25)

60

(1.5)

 

1.8

(70)

2.1

 

(84)

9

(4)

82

(32)

 

1.9

(76)

2.3

(91)

-2

(-1)

77

(30)

70

(1.8)

 

2.1

(81)

2.5

 

(98)

11

(4)

96

(38)

 

2.3

(89)

2.7

(107)

-3

(-1)

90

(35)

80

(2.0)

 

2.4

(93)

2.8

 

(112)

12

(5)

110

(43)

 

2.6

(102)

3.1

(122)

-3

(-1)

103

(41)

90

(2.3)

 

2.7

(105)

3.2

 

(126)

14

(5)

123

(49)

 

2.9

(115)

3.5

(138)

-4

(-1)

116

(46)

100

(2.5)

 

3.0

(117)

3.6

 

(140)

15

(6)

137

(54)

 

3.2

(127)

3.9

(153)

-4

(-2)

129

(51)

120

(3.0)

 

3.6

(140)

4.3

 

(169)

18

(7)

165

(65)

 

3.9

(153)

4.7

(184)

-5

(-2)

154

(61)

150

(3.8)

 

4.5

(176)

5.4

 

(211)

23

(9)

206

(81)

 

4.9

(192)

5.8

(230)

-6

(-2)

193

(76)

200

(5.1)

 

6.0

(235)

7.2

 

(282)

30

(12)

274

(108)

 

6.5

(256)

7.8

(307)

-8

(-3)

257

(101)

250

(6.4)

 

7.5

(294)

9.0

 

(353)

38

(15)

343

(135)

 

8.1

(320)

9.8

(384)

-10

(-4)

322

(127)

300 (7.6) 9.0 (352) 10.8 (423) 46 (18) 411 (162) 9.8 (384) 11.7 (461) -12 (-5) 386 (152)

Setting up

Adjusting the projector's elevator

CAUTION ►If you press the elevator button without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust the elevator feet.

►Do not incline the projector rightward or leftward. Also do not incline it backward or forward exceeding 30 degrees. Exceeding these range could cause malfunction, and could shorten the lifetime of the consumables.

►Except for inclining by the elevator feet adjustment, place the projector horizontally.

You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.

Elevator feet

Elevator button

1. After making sure that the projector is cool adequately, press and hold in the elevator buttons while holding the projector.

The elevator buttons and the elevator feet are on the both sides.

2. Raise or lower the projector to the desired height and release the elevator buttons.

When you release the elevator buttons, the elevator feet will lock into position.

3. If necessary, you can also finely adjust the height of the projector by twisting the elevator feet by hand.

Setting up

Using the Security Bar

WARNING ►Do not use the security bar to prevent the projector from falling. Dropping or knocking over the projector may cause damage or injury.

CAUTION ►The security bar is not a comprehensive theft prevention measure. It is intended to be used as an extra theft prevention measure.

A commercial anti-theft chain or wire can be attached to the security bar on the projector.

1. How to attach

An anti-theft chain or wire can be attached as shown in the illustration. (Anti-theft chains or wires of up to 10mm in diameter can be used)

Security Bar

Anti-theft chain or wire [sold separately]

10

Setting up

Connecting your devices

CAUTION ►Turn off all devices prior to connecting them to the projector.

Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector.

►Use the accessory cable or a designated-type cable for the connection.

Some cables have to be used with core set. A too long cable may cause a certain picture degradation. Please consult with your dealer for details. For cables that have a core only at one end, connect the core to the projector.

►Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector.

NOTE • Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop’s RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.

Secure the screws on the connectors and tighten.

Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

For some RGB signal modes, the optional Mac adapter is necessary.

When the image resolution is changed on a computer, depending on an input, automatic adjustment function may take some time and may not be completed. In this case, you may not be able to see a check box to select “Yes/No” for the new resolution on Windows. Then the resolution will go back to the original. It might be recommended to use other CRT or LCD monitors to change the resolution.

About Plug-and-Play capability

Plug-and-Play is a system composed of the computer, its operating system and peripheral equipment (i.e. display devices). This projector is compatible with VESA DDC 2B. Plug-and-Play can be achieved by connecting this projector to a computer is VESA DDC (display data channel) compatible.

Please take advantage of this function by connecting the accessory RGB cable to the RGB IN1 port (DDC 2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted.

Please use the standard drivers in your computer as this projector is a Plug-and-Play monitor.

11

IBM ED-X10, ED-X12 User Manual

Setting up

Examples of connection with a computer

* In the default setting, the AUDIO IN1 port is the audio port for the RGB IN1, and the AUDIO IN2 port is the audio port for the RGB IN2 ports. To change the settings, refer to the AUDIO item in the SETUP menu. (36)

RGB cable

USB cable

AUDIO IN3

Y R

 

 

 

 

RGB IN1

RGB IN2 RGB OUT AUDIO OUT

 

 

CB/PB

L

AUDIO IN1

 

RGB out Audio out RS-232C USB

CR/PR

IN2

 

 

 

 

 

 

 

 

 

 

VIDEO

 

K

USB

 

 

 

 

 

 

 

S-VIDEO

 

 

Stereo mini

RS-232C cable

 

 

 

 

 

 

 

audio cable

 

 

 

 

 

 

Stereo mini audio cable

 

RGB out

Audio out

AUDIO IN Y R

 

 

 

RGB IN1

RGB IN2

RGB OUT

AUDIO OUT

 

CB/PB

L

AUDIO IN1

 

 

 

 

 

AUDIO IN2

 

 

 

 

 

 

 

 

 

 

CR/PR

 

K

CONTROL

USB

 

 

VIDEO

 

 

 

 

 

 

 

 

 

RGB cable

S-VIDEO

 

 

 

 

 

 

 

 

 

 

Connecting to a monitor (output)

RGB in

RGB cable

Y

AUDIO IN3

 

 

 

R

 

 

 

 

 

 

RGB IN1

RGB IN2

RGBOUT

AUDIO OUT

 

 

 

 

T

 

CB/PB

L

AUDIO IN1

 

 

 

 

AUDIO IN2

 

 

 

 

 

 

 

 

CR/PR

 

K

CONTROL

USB

 

VIDEO

 

 

 

 

 

 

 

 

S-VIDEO

 

 

 

 

Connecting to a speaker with amplifier (output)

Audio in

AUDIO IN3

Y R

 

 

 

RGB IN1

RGB IN2

RGB OUT AUDIO OUT

CB/PB

L

AUDIO IN1

 

 

 

AUDIO IN2

 

 

 

 

 

 

CR/PR

 

K

CONTROL

USB

VIDEO

 

 

 

 

 

 

S-VIDEO

 

 

 

Stereo mini audio cable

12

Setting up

Examples of connection with a VCR/DVD player

* In the default setting, the AUDIO IN3 L/R port is the audio port for the VIDEO, S-VIDEO

and COMPONENT VIDEO ports. To change the settings, refer to the AUDIO item in the SETUP menu. (36)

Audio/Video cable

Audio (R) out

Audio (L) out

Video out

Audio cable

Y

AUDIO IN3

 

 

R

 

 

 

 

 

RGB IN1

RGB IN2

RGB OUT AUDIO OUT

CB/PB

L

AUDIO IN1

 

 

 

AUDIO IN2

 

 

 

 

 

 

CR/PR

 

K

CONTROL

USB

VIDEO

 

 

S-VIDEO

Audio (R) out

Audio (L) out

S-Video out

Y

AUDIO IN3

 

 

R

 

 

 

RGB IN1

RGB IN2

RGB OUT AUDIO OUT

CB/PB

AUDIO IN1

 

 

 

AUDIO IN2

 

 

CR/PR

K

CONTROL

USB

VIDEO

 

 

 

 

S

S-Video cable

Component video out

Component video cable

 

 

 

Y

 

 

3

 

 

 

 

Y

R

 

 

 

CB/PB

 

 

 

 

 

 

RGB IN1

RGB IN2

RGB OUT

AUDIO OUT

 

 

 

 

CB/PB

L

AUDIO IN1

 

 

 

 

 

AUDIO IN2

 

 

 

CR/PR

 

 

 

 

 

CR/PR

 

K

CONTROL

USB

 

 

VIDEO

 

 

 

 

 

 

 

 

 

Audio (R) out

S-VIDEO

 

 

 

 

 

 

 

 

 

 

Audio (L) out

Audio cable

 

 

 

SCART cable

G

 

B

 

R

SCART

Video

out

 

Y

AUDIO IN3

 

 

R

 

 

 

 

 

RGB IN1

RGB IN2

RGB OUT AUDIO OUT

CB/PB

L

AUDIO IN1

 

 

 

AUDIO IN2

 

 

 

 

 

 

CR/PR

 

K

CONTROL

USB

VIDEO

 

 

 

 

 

 

13

Setting up

Connecting power supply

WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock.

Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

Only plug the power cord into an outlet rated for use with the power cord's specified voltage range.

Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.

1.

2.

AC inlet

Connector

of the power cord

Connect the connector of the power cord to the AC inlet of the projector.

Firmly plug the power cord's plug into the outlet.

14

Remote control

Remote control

Putting batteries

WARNING ►Always handle the batteries with care and use them only as directed. Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.

And also improper use may result in cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.

Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one.

Make sure the plus and minus terminals are correctly aligned when loading a battery.

Keep a battery away from children and pets. If swallowed consult a physician immediately for emergency treatment.

Do not short circuit or solder a battery.

Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.

If you observe a leakage of a battery, wipe out the flower and then replace a battery.

If the liquid adheres to your body or clothes, rinse well with water immediately.

Obey the local laws on disposing the battery.

1. Remove the battery cover.

Slide back and remove the battery cover in the direction of the arrow.

2. Insert the batteries.

Align and insert the two AA batteries according to their plus and minus terminals as indicated in the remote control.

3. Close the battery cover.

Replace the battery cover in the direction of the arrow and snap it back into place.

15

Remote control

Using the remote control

CAUTION ►Be careful in handling the remote control.

Do not drop or expose the remote control to physical impact.

Do not get the remote control wet or place it on wet objects. It may result in malfunction.

Remove the batteries from the remote control and store them in a safe place if you won’t be using the remote control for an extended period.

Replace the batteries whenever the remote control starts malfunctioning.

When strong lights (such as direct sunlight) or light from an extremely close range (such as from an inverter fluorescent lamp), hit the projector’s remote sensor, the remote control may cause to function. Adjust the direction of the projector to keep the light from directly hitting the projector’s remote sensor.

The signal settings for the remote control transmitter and the projector's remote sensor can be changed. If the remote control does not function properly try changing the signal setting.

Changing the signal setting for the remote control transmitter

(1)Setting 1 (FREQ. : NORMAL)

Simultaneously press and hold the MUTE and RESET buttons for about 3 seconds. (2)Setting 2 (FREQ. : HIGH)

Simultaneously press and hold the MAGNIFY OFF and ESC buttons for about 3 seconds.

Setting 1 is the factory default setting.

When the batteries are removed from the remote control, user-specified settings are saved for about half a day. If the batteries are removed from the remote control for longer than half a day, the remote will reset to Setting 1.

Changing the signal setting for the projector's remote sensor

Switch between Setting 1 and 2 using the SERVICE/REMOTE FREQ. item found in OPTION MENU. (43)

If the remote control does not seem to function properly, try changing the settings for the remote control and the projector's remote sensor.

The remote control will not function properly if the remote control transmitter settings and the projector's remote sensor settings are not the same.

The remote control works with the projector’s remote sensor.

30º

approx. 3 meters

30º

 

The range of the remote sensor is 3 meters with a 60 degree range (30 degrees to the left and right of the remote sensor).

Also a remote signal reflected in the screen etc. may be available. If it is difficult to send a remote signal to the sensor directly, please try to use the reflected signal.

Since the remote control uses infrared light to send signals to the projector (Class1 LED), be sure to use the remote control in an area free from obstacles that could block the remote control’s output signal to the projector.

16

Power off?
POWER
(Blinking in orange)
POWER
(Steady orange)
17

Power on/off

Power on/off

WARNING ►When the power is on, a strong light is emitted. Do not look into the lens of projector. Also do not peep at the inside of projector through a hole.

NOTE • Turn the power on/off in right order. Please power on the projector prior to the connected devices. Power off the projector later than the connected devices.

Turning on the power

1. Make sure that the power cord is firmly and correctly connected to the projector and the outlet.

2. Remove the lens cover, and set the power switch to the ON position.

The power indicator will light up in steady orange. Then wait several seconds because the buttons may not function for these several seconds.

STANDBY/ON button

(1)When AUTO ON in the OPTION menu is set to TURN ON:(40) The lamp will only be automatically turned on when the Power switch is turned on after the power was turned off by Power switch last time. Afterwards the POWER indicator will begin blinking in green. When the power is completely on, the indicator will stop blinking and light in green.

(2)When AUTO ON in the OPTION menu is set to TURN OFF please see step 3.

3.Press the STANDBY/ON button on the projector or the remote control.

To display the picture, select an input signal according to the section "Selecting an input signal" (18).

POWER indicator

POWER

(Steady orange)

POWER

(Blinking in green)

POWER

(Steady green)

Turning off the power

Please pay special attention to below two points when you do:

(1) Please do not turn the projector on again for at least 10 minute in this case. Neglect could shorten the lifetime of the lamp.

(2) During use or immediately after use, do not touch around the lamp and vents of the projector (4 ê) It could cause a burn.

1. Press the STANDBY/ON button on the projector or the remote control.

The message "Power off?" will appear on the screen for about 5 seconds.

2. Press the STANDBY/ON button on the projector or the remote control again while the message appears.

The projector lamp will go off, and the POWER indicator will begin blinking in orange.

Then the POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete.

3. Make sure that the power indicator lights in steady orange, and set the power switch to the OFF position. The POWER indicator will go

off. Attach the lens cover.

1.
2.

Operating

Operating

Adjusting the volume

Press the VOLUME button on the remote control.

A dialog will appear on the screen to aid you in adjusting the volume.

Use the cursor buttons ▲/▼ to adjust the volume.

To close the dialog and complete the operation, press the VOLUME button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

Temporarily muting the sound

1. Press the MUTE button on the remote control.

A dialog will appear on the screen indicating that you have muted the sound.

To restore the sound, press the MUTE or VOLUME button. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

VIDEO

RGB

SEARCH

 

ASPECT

 

AUTO

BLANK

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

 

END

PAGE DOWN

 

ASPECT

 

AUTO

BLANK

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

OFF

END

PAGE DOWN

MUTE

 

 

 

FREEZE

MY BUTTON

 

 

1

2

 

Selecting an input signal

1. Press the INPUT button on the projector.

Each time you press the button, the projector switches its input port as below.

RGB IN1 RGB IN2

VIDEO S-VIDEO COMPONENT VIDEO

1. Press the RGB button on the remote control to select an input port for the RGB signal.

Each time you press the button, the projector switches its RGB input port as below.

VIDEO

RGB SEARCH

ASPECT

AUTO BLANK

RGB IN1 RGB IN2

If the RGB button is pushed (when switching from VIDEO to RGB signals) when TURN ON is selected for the AUTO SEARCH item in the OPTION menu the projector will check the RGB IN1 port first. If no input is detected at the port, the projector will check the RGB IN2 port.

18

Operating

Selecting an input signal (continued)

1. Press the VIDEO button on the remote control to select an input for video signal.

Each time you press the button, the projector switches its video input port as below.

COMPONENT VIDEO S-VIDEO VIDEO

VIDEO RGB SEARCH

AUTO BLANK

If the VIDEO button is pushed (when switching from RGB to VIDEO signals) when TURN ON is selected for the AUTO SEARCH item in the OPTION menu the projector will check the COMPONENT VIDEO port first. If no input is detected at the port, projector will begin to check other ports in above order.

Searching an input signal

1.

Press the SEARCH button on the remote control.

VIDEO

RGB SEARCH

 

The projector will start to check its input ports in order to

ASPECT

BLANK

find any input signals.

When an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation.

RGB IN 1 RGB IN 2 COMPONENT VIDEO S-VIDEO VIDEO

Selecting an aspect ratio

1. Press the ASPECT button on the remote control.

Each time you press the button, the projector switches the mode for aspect ratio in turn.

For an RGB signal

NORMAL 4:3 16:9 SMALL

For a video signal, s-video signal or component video signal

4:3 16:9 14:9 SMALL

VIDEO

RGB SEARCH

ASPECT

AUTO BLANK

ON

HOME

PAGE UP VOLUME

 

 

For a no signal

4:3 (fixed)

The NORMAL mode keeps the original aspect ratio of the signal.

Performing the automatic adjustment initializes the aspect ratio setting.

Adjusting the zoom and focus

1.

Use the zoom ring to adjust the screen size.

Focus ring

Zoom ring

2.

Use the focus ring to focus the picture.

 

 

19

Loading...
+ 43 hidden pages