Size:
563.05 Kb
Download

LCD Monitor

User's Guide

First Edition (April 2002)

Note: For important information, refer to the Monitor Safety and Warranty manual that comes with this monitor.

This publication could contain technical inaccuracies or typographical errors. Changes are made periodically to the information herein; these changes will be made in later editions. IBM may make improvements and/or changes in the product(s) and/or program(s) at any time.

It is possible that this publication may contain references to, or information about IBM products (machines and programs) programming or services that are not announced in your country.

Requests for copies of this publication or technical information about IBM products should be made to your IBM Authorized Dealer or IBM Retailer.

No part of this publication may be reproduced or distributed in any form or by any means without prior permission in writing from the International Business Machines Corporation.

© Copyright International Business Machines Corporation April 2002. All rights reserved.

Note to U.S. Government Users: Documentation related to restricted rights - Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.

Notices

References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any reference to IBM product programs or services is not intended to state or imply that only IBM’s products, programs, or services may be used. Any functionally equivalent product, program, or service that does not infringe any of IBM’s intellectual property rights or other legally protected rights may be used instead of the IBM products, programs, or services. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by IBM, are the user’s responsibility.

IBM may have patents or pending patent applications covering subject matter in this document. The furnishing of this document does not give you any license to these patents.

Trademarks

The following terms, used in this publication, are trademarks or service marks of the IBM Corporation in the United States, other countries, or both:

HelpCenter IBM

ENERGY STAR is a U.S. Govt. registered trademark.

Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.

Other company, product, and service names may be trademarks or service marks of others.

TABLE OF CONTENTS

 

BEFORE YOU OPERATE THE MONITOR --------------------------

1

PACKING LIST -------------------------------------------------------

1

CONTROLS AND CONNECTORS ------------------------------

1

ADJUSTING THE VIEWING ANGLE ----------------------------

2

OPERATING INSTRUCTIONS -----------------------------------------

3

GENERAL INSTRUCTIONS --------------------------------------

3

HOW TO ADJUST A SETTING ----------------------------------

4

ADJUSTING THE PICTURE --------------------------------------

5

DEVICE DRIVER INSTALLATION --------------------------------------

7

TECHNICAL SUPPORT (FAQ)------------------------------------------

11

TROUBLESHOOTING----------------------------------------------

11

APPENDIX -------------------------------------------------------------------

13

SPECIFICATIONS ---------------------------------------------------

13

VIDEO CONNECTOR PIN ASSIGNMENT ---------------------

14

FACTORY PRESET TIMING TABLE ----------------------------

15

POWER MANAGEMENT -------------------------------------------

16

SERVICE INFORMATION ------------------------------------------

17

Before operating the monitor please read this manual thoroughly. This manual should be retained for future reference.

PACKING LIST

The product package should include the following items:

1.LCD Monitor

2.Setup Guide

3.Power Adapter/Cord

4.User’s Guide CD with installation files

5.Safety/Warranty Booklet

CONTROLS AND CONNECTORS

3

 

 

1

 

 

 

 

2

 

 

Figure 1 Connecting Cables

1.

Signal Cable

 

3. AC Power Cord

2.

External Power Adapter

 

VIDEO CABLE

Connecting the Signal Cable:

The LCD monitor comes with a built-in signal cable. Plug the signal cable′s 15-pin connector into the computer's video port and tighten the two screws on the cable connector. Refer to Appendix for the detail connector pin assignment.

1

POWER CORD

Power Source:

1.This LCD monitor has a universal power adapter that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.)

2.Connect the power cord into your LCD monitor’s power input socket, and then plug the other end into a 3-pin AC power outlet.

ADJUSTING THE VIEWING ANGLE

For optimum viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference.

Hold the stand so you do not topple the monitor when you change the monitor’s angle.

You are able to adjust the monitor’s angle from -4° to 41° .

41

-4

Figure 2

NOTES

Be careful if you touch the LCD screen, you may damage it.

Be careful. Do not catch your fingers or hands when you change the angle.

2

OPERATING INSTRUCTIONS

GENERAL INSTRUCTIONS

Press the power button to turn the monitor on or off. The other control buttons are also located on front panel of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences.

Press the power button to turn on the monitor. The power indicator will light up.

6

5

4

3

2

1

Figure 3 Control buttons

CONTROLS

 

Icon

 

Control

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Displays the OSD main menu

1

 

 

 

 

 

 

Exit

Exits from menus and sub-menus

 

 

 

 

 

 

 

 

Exits the OSD

 

 

 

 

 

 

 

 

Displays the OSD main menu

2

 

 

 

 

 

 

Left Arrow

Moves the cursor to highlight icons and

 

 

 

 

 

 

 

 

 

 

other options

3

 

 

 

 

 

 

 

Displays the OSD main menu

 

 

 

 

 

 

Right Arrow

Moves the cursor to highlight icons and

 

 

 

 

 

 

 

 

 

 

 

 

other options

4

 

 

 

 

 

 

 

Displays the OSD main menu

 

 

 

 

 

 

OSD Enter

Enters menus and sub-menus and selects

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the highlighted option

5

 

 

 

 

 

 

Power Switch

Switches the monitor on and off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

LED

The LED indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Operation

Press any OSD control buttons to display the main OSD menu.

Use the Arrow buttons to move among the icons. Select an icon and press OSD Enter to access that function. There is a sub-menu for you to move between options by using the Arrow buttons. Then press OSD Enter to select that function. Use the Arrow buttons to make adjustments.

Press the Exit button to move backwards through the sub-menus and exit from the OSD.

OSD Lock / Unlock:

This feature allows you to secure the current control settings, so that you cannot inadvertently change these settings while you adjust Brightness and Contrast. You can unlock the OSD controls through the same procedure.

Push and hold the OSD Enter button for 10 seconds to Lock or to Unlock. When locked, a “LOCKED” message will be displayed.

HOW TO ADJUST A SETTING

The settings adjusted by the user controls are viewed through the On-Screen Display (OSD). Press any OSD buttons to activate the OSD.

Initial appearance of OSD

OSD Message

4

ADJUSTING THE PICTURE

OSD functions

OSD icon

Description

Sub-

Controls and

menu(s)

Adjustments

 

 

Brightness

Adjusts brightness

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjusts contrast

 

 

 

 

 

 

 

 

 

Contrast

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This image lock function is used

 

 

 

 

 

 

 

 

 

 

to adjust the level of noise in the

 

 

 

 

 

 

 

 

 

 

video signal, which causes

 

 

 

 

 

 

 

 

 

 

horizontal lines or areas on the

Automatic Automatic adjustment

 

screen where the image appears

IMAGE LOCK to be unstable and jitters or

 

 

 

 

 

 

 

 

 

 

shimmers. This can be done

 

 

 

 

 

 

 

 

 

 

automatically or manually.

 

 

 

 

 

 

 

 

 

 

Use the Arrow buttons to adjust

 

 

 

 

 

 

 

 

 

 

away the interference. If

 

 

 

 

 

 

 

 

 

 

satisfactory results are not

 

 

 

 

 

 

 

 

 

 

obtained by using the Fine

 

 

 

 

 

 

 

 

 

 

adjustment first, then use the

Manual

 

COARSE adjustment and finally

˙Fine

IMAGE LOCK

use FINE adjustment again.

These actions may change the

˙Coarse

(Continued)

width of the display image. Use

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the H-Position function on the

 

 

 

 

 

 

 

 

 

 

image position menu to center

 

 

 

 

 

 

 

 

 

 

the display image on the screen.

 

 

 

 

 

 

 

 

 

 

 

H-position

 

Moves the screen left and right or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IMAGE

up and down.

V-position

 

POSITION

 

 

 

 

 

 

 

 

 

 

 

 

5

OSD functions

 

 

 

Mode 1

 

 

 

(Cool White, 9300°K)

 

 

Color Mode

Mode 2

 

 

(Normal White, 7200°K)

 

 

 

 

Select the Color Mode you find

 

Mode 3

 

 

(Warm White, 6500°K)

 

most comfortable and then fine

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tune the color using the user

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COLOR

User Mode –

Increases or decreases

Color Mode menu, if necessary.

 

 

˙Red

redness

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

˙Green

Increases or decreases

 

 

greenness

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

˙Blue

Increases or decreases

 

 

blueness

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Resets the Brightness, Contrast

 

NO–Does not make the

 

Color Reset

adjustment

 

and Color settings.

 

 

YES–Resets the color

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RESET

Resets the image position

 

NO– Does not make the

Geometry

adjustment

 

settings.

Reset

YES–Resets the

 

 

 

geometry

 

Shows information about the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

addressability and the horizontal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and vertical frequencies of the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INFORMATION

images received from the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

computer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The language chosen affects

 

Select one of the five

 

only the language of the OSD. It

 

 

has no effect on any software

 

languages to use for the

 

 

OSD.

LANGUAGE

running on the computer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Changes the position of the OSD

H-Position

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OSD MENU

on the screen.

V-Position

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

POSITION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

Device driver installation

Use the User’s Guide and Installation Files CD that comes with your monitor to install the appropriate device driver for your operating system.

Installing the Windows XP device driver

To manually install or update the device driver for the Microsoft® Windows® XP operating system, perform the following steps:

1.Insert the User’s Guide and Installation Files CD into the computer CDROM drive.

2.Click Start Control Panel Appearance & Themes and then click the Display icon.

3.In the Display Properties window, click the Settings tab, and then click Advanced.

4.Click the Monitor tab, and then click Properties Driver tab Update Driver.

5.When the Hardware Update Wizard window opens, select “Install the software automatically,” click Next> and then Finish to complete the installation.

6.Close the Display Properties window.

7.Remove the User’s Guide and Installation Files CD from the computer CD-ROM drive.

Installing the Windows Me device driver

To manually install or update the device driver for the Microsoft Windows Millennium Edition operating system, perform the following steps:

1.Click Start Settings Control Panel and then double-click Display.

2.In the Display Properties window, click the Settings tab, and then click Advanced.

3.Click the Monitor tab, and then click Change Specify the location of the driver Next.

7

4.When the Update Device Driver Wizard window opens, select "Display a list of all the drivers in a specific location, so you can select the driver you want," and click Next>.

5.Insert the the Device driver and User’s Guide CD into the computer CDROM drive, then click Have Disk.

6.Type d:\ (change the drive letter to match your CD-ROM drive if it is not drive D) in the Copy manufacturer's files from: box, then click OK.

7.Click Next>, Next>, and then Finish to complete the installation.

8.Close the Display Properties window.

9.Remove the User’s Guide and Installation Files CD from the computer CD-ROM drive.

Installing the Windows 2000 device driver

To manually install or update the device driver for the Microsoft Windows 2000 Professional operating system, perform the following steps:

1.Click Start Settings Control Panel and then double-click

Display.

2.In the Display Properties window, click the Settings tab, and then click Advanced.

3.Click the Monitor tab, and then click Properties Driver

Update Driver.

4.When the Update Device Driver Wizard window opens, select "Search for a suitable driver for my device," and click Next>.

5.Insert the Device Driver and User’s Guide CD into the computer CD-ROM drive, type d:\ (change the drive letter to match your CDROM drive if it is not drive D) in the Copy manufacturer's files from: box, click Next> and then Finish to complete the installation.

6.Close the Display Properties window.

7.Remove the User’s Guide and Installation Files CD from the computer CD-ROM drive.

8

Installing the Windows 98 device driver

Windows 98 automatically detects the new monitor and displays the Add New Hardware Wizard dialog box if the device driver is not already installed.

1.Insert the Device Driver and User’s Guide CD into the computer CD-ROM drive, and click Next> twice when the Add New Hardware Wizard window opens.

2.Click the CD-ROM drive box to install the device drivers from the CD and then click Next>.

3.Confirm that the device driver was found on the CD, and click Next> twice to install the device driver.

4.Click Finish to exit the Add New Hardware Wizard dialog box.

To manually install or update the device driver for the Microsoft Windows 98 operating system, perform the following steps:

1.Click Start Settings Control Panel and then double-click

Display.

2.In the Display Properties window, click the Settings tab, and then click Advanced.

3.Click the Monitor tab, and then click Change.

4.When the Update Device Driver Wizard window opens, follow the steps in the previous paragraph.

5.Remove the User’s Guide and Installation Files CD from the computer CD-ROM drive.

Installing the Windows 95 device driver

Right-click the My computer icon on the computer desktop and then select Properties System to view the version number listed in the System window. Perform the steps below for the appropriate version.

If you have Windows 95 Version 4.00.950A, use the following steps to manually install or update the device driver:

1.Click Start Settings Control Panel and then double-click Display.

9

2.In the Display Properties window, click the Settings tab and then click Change Display Type.

3.In the Change Display Type window, click Change and then click

Have Disk.

4.Insert the Device Driver and User’s Guide CD into the computer CD-ROM drive, type d:\ (change the drive letter to match your CDROM drive if it is not drive D) in the Copy manufacturer's files from: box, and click OK.

5.In the Select Device window, click the appropriate monitor model and then click OK.

6.In the Change Display Type window, click Close.

7.In the Display Properties window, click OK.

8.Remove the User’s Guide and Installation Files CD from the computer CD-ROM drive.

If you have Windows 95 Version 4.00.950B, use the following steps to manually install or update the device driver:

1.Click Start Settings Control Panel and then double-click

Display.

2.In the Display Properties window, click the Settings tab and then click Advanced Properties.

3.In the Advanced Display Properties window, click the Monitor tab and then click Change.

4.In the Select Device window, click Have Disk.

5.Insert the Device Driver and User’s Guide CD into the computer CD-ROM drive, type d:\ (change the drive letter to match your CDROM drive if it is not drive D) in the Copy manufacturer's files from: box, and click OK.

6.In the Select Device window, click the appropriate monitor model and then click OK.

7.In the Advanced Display Properties window, click Close.

8.In the Display Properties window, click OK.

9.Remove the User’s Guide and Installation Files CD from the computer CD-ROM drive.

10

TECHNICAL SUPPORT (FAQ)

TROUBLESHOOTING

Problem

Possible

Suggested Action

Reference

Cause

 

 

 

 

 

 

 

 

 

Ensure that the electrical

 

 

 

outlet and the monitor are

 

 

 

both switched on.

 

 

 

Check that the power cord

 

Screen is blank

No Power to

is firmly plugged into the

CONTROLS AND

and power

monitor

electrical outlet and the

CONNECTORS

indicator is off

power supply unit.

Section on page 1

 

 

 

Try another power cord.

 

 

 

Try another electrical

 

 

 

outlet.

 

 

 

 

 

Screen is blank

Brightness

Adjust brightness and

OPERATING

and power

and Contrast

INSTRUCTIONS

indicator is

may be too

contrast.

Section on page 3

steady green

low

 

 

 

 

 

Press any key on the

 

Screen is blank

The monitor is

keyboard or move the

 

mouse to restore

 

and power

in the Power

Power Management

operation.

indicator is

Management

section on page 16

Check the Power

steady amber

Standby state

 

 

 

Management software on

 

 

 

your computer

 

Screen is blank

Display mode

 

 

and power

of the

Reconfigure the computer

Factory set display

indicator is

computer is

flashing green

outside the

to use a supported display

mode

mode.

Section on page 15

every 0.5

range of the

second

monitor

 

 

11

Problem

Possible

Suggested Action

Reference

Cause

 

 

 

 

 

 

 

Screen is blank

The monitor is

 

 

and power

in the Power

Check the Power

Power Management

indicator is

Management

Management software on

flashing amber

Suspend or

your computer

section on page 16

every 0.5 or 1

 

Off state

 

 

second

 

 

 

 

 

Screen is blank

 

Check that the signal

 

The monitor is

cable is firmly connected

CONTROLS AND

and power

to the computer.

indicator is

not receiving

CONNECTORS

Check that no pins are

flashing green

a video signal

Section on page 1

every 1 second

 

bent in the signal cable

 

 

 

connector.

 

 

 

Select IMAGE LOCK

OPERATING

Image appears

 

menu in the OSD. Then

 

INSTRUCTIONS

to be smeared

 

select MANUAL to adjust

 

Section on page 3

 

 

FINE/COARSE settings.

 

Image appears

The Color

Adjust the Color settings.

OPERATING

to be discolored

setting may

INSTRUCTIONS

 

be incorrect

 

Section on page 3

 

 

The LCD contains over

 

 

 

2,300,000 thin film

 

A few dots are

 

transistors (TFTs). A small

 

 

number of missing,

 

missing,

 

discolored, or lighted dots

 

discolored, or

 

 

 

may be present on the

 

inappropriately

 

 

 

screen, which is an

 

lighted.

 

 

 

 

intrinsic characteristic of

 

 

 

the TFT LCD technology

 

 

 

and is not an LCD defect.

 

“COARSE” (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture does not have the correct width.

“FINE” adjust the phase of the pixel clock signal. With a wrong phase adjustment the picture has horizontal disturbances in light picture.

For “FINE” and “COARSE” adjustment use a dot pattern or Windows 95/98 /ME/XP/2000 shutdown screen.

12

APPENDIX

SPECIFICATIONS

IBM 9512-AW*/ AB* TFT Color LCD Monitor

LCD Panel

Driving system

TFT Color LCD

Size

381mm(15.0")

 

Pixel pitch

0.297mm(H) x 0.297mm(V)

 

Viewable angle

120° (H) 100° (V)

 

Response time

30 ms

Input

Video

R, G, B Analog Interface

Separate Sync.

H/V TTL

 

H-Frequency

30kHz – 60kHz

 

V-Frequency

55Hz-75Hz

Display Colors

 

16.7 million Colors

Dot Clock

 

80MHz

Max. Resolution

 

1024 x 768

Plug & Play

 

VESA EDDC

EPA ENERGY STAR®

ON Mode

<30W

 

Active OFF

<3W

 

OFF Mode

<1W at 100Vac

 

 

<2W at 220Vac

Input Connector

 

D-Sub 15pin

Input Video Signal

 

Analog:0.7Vp-p 75 OHM,

Maximum Screen Size

 

Horizontal: 304.1mm (12.0”)

 

 

Vertical: 228.1mm (9.0”)

Power Source

 

100~240VAC,50~60Hz

Environmental

 

Operating Temp: 10°C to 35°C

Considerations

 

5°F to 95°F

 

 

Ship/Storage Temp: -20° to 60°C

 

 

-4°F to 140°F

 

 

Operating Humidity: 10% to 80%

 

 

non-condensing

 

 

Ship/Storage Humidity:

 

 

5% to 95% non-condensing

Weight (N. W.)

 

4.8kgs

unpackaged:

 

packaged:

 

6.2Kgs

Regulatory

 

UL, CSA, FCC, TÜV, CE,

Compliance

 

TCO’99 for Pearl White models

 

 

TCO’95 for Stealth Black models

13

CONNECTOR PIN ASSIGNMENT

 

1

5

 

 

6

10

 

 

11

15

 

 

15 - Pin Color Display Signal Cable

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1.

Red

9.

+5V

2.

Green

10.

Detect Cable

3.

Blue

11.

Ground

4.

Ground

12.

DDC-Serial Data

5.

Ground

13.

H-Sync

6.

R-Ground

14.

V-Sync

7.

G-Ground

15.

DDC-Serial Clock

8.

B-Ground

 

 

14

FACTORY PRESET TIMING TABLE

DISPLAY MODES

The display mode the monitor uses is controlled by the computer. Therefore, you should refer to your computer documentation for details in how to change display modes.

The image size, position and shape may change when the display mode changes. This is normal and the image can be readjusted using the monitor controls.

Unlike CRT monitors, which require a high refresh rate to minimize flicker, TFT technology is inherently flicker-free. If possible, configure your computer for 1024 X 768 addressability at 60Hz vertical refresh rate.

For the display modes listed below, the screen image has been optimized during manufacture.

Factory Set Display Modes

ADDRESSABILITY

REFRESH RATE

HORIZONTAL

FREQUENCY

 

640 × 350

70Hz

31.5kHz

 

 

 

640 × 480

60Hz

31.5kHz

 

 

 

640 × 480

72Hz

37.9kHz

640 × 480

75Hz

37.5kHz

 

 

 

640 × 480

67Hz

35.0kHz

 

 

 

 

720

× 400

70Hz

31.5kHz

 

 

 

 

800

× 600

75Hz

46.9kHz

800

× 600

72Hz

48.1kHz

 

 

 

 

800

× 600

60Hz

37.9kHz

 

 

 

 

800

× 600

56Hz

35.2kHz

832

× 624

75Hz

49.7kHz

 

 

 

 

1024

× 768+

60Hz

48.4kHz

 

 

 

1024 × 768

70Hz

56.5kHz

 

 

 

1024 × 768

75Hz

60.0kHz

+ Recommended

15

Power Management

As an ENERGY STAR® Partner, IBM has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

The power management feature is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below.

IBM recommends that you switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.

State

Power

Screen

Restoring

Compliance

Indicator

Operation

 

 

 

On

Steady green

Normal

 

 

 

 

Active Off

Steady amber

Blank

Press a key or move

ENERGY STAR®

the mouse.

And NUTEK

 

 

 

Off

Steady amber

Blank

Press a key or move

ENERGY STAR®

the mouse.

 

 

And NUTEK

 

 

 

 

 

 

 

The picture will be re-appeared few seconds later.

16

Service Information

The following parts are for use by IBM service, or IBM authorized dealers, to support customer warranty. Parts are for service use only.

Model Type 9512-AB*/9512-AW*

P/N

Description

Video Color

MTM

Geography

31P7251

FRU Monitor

Analog SB

9512-AB1

WW

31P7252

FRU Monitor

Analog PW

9512-AW1

WW

31P7253

FRU Stand

Analog SB

9512-AB1

WW

31P7254

FRU Stand

Analog PW

9512-AW1

WW

31P7255

FRU Power Supply

Analog Black

9512-AW1

WW

9512-AB1

 

 

 

 

31P7256

FRU Video Cable

Analog Black

9512AW1

WW

9512-AB1

 

 

 

 

Note:

WW FRU Monitor includes Monitor, Stand, Power Supply & Video Cable.

17