Hyundai H-CMD2002, Electronics H-CMD2002 User Manual

2.46 Mb
Loading...

EXCELLENCE

by

H-CMD2002

2DIN MULTIMEDIA DVD-RECEIVER WITH MOTORIZED 6.5 TFT DISPLAY

Instruction manual

2DIN DVD- 6,5 TFT

Dear customer!

 

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully

 

before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

 

Table of contents

 

 

 

Table of contents ...............................................................................................................................................

2

Important safeguards .........................................................................................................................................

6

Multizone device description .............................................................................................................................

7

Installation/ connection......................................................................................................................................

8

Method 1 ....................................................................................................................................................

8

Method 2 ....................................................................................................................................................

8

Electrical connection.................................................................................................................................

12

Unit controls....................................................................................................................................................

15

Monitor ....................................................................................................................................................

15

Rear side...................................................................................................................................................

18

Remote control 1 (general)........................................................................................................................

19

Remote control 2 (kid zone)......................................................................................................................

21

Monitor operations ..........................................................................................................................................

23

Open/close TFT monitor ...........................................................................................................................

23

TFT monitor auto open .............................................................................................................................

23

Monitor tilting position adjustment ...........................................................................................................

23

Aspect ratio ..............................................................................................................................................

24

Image setting ............................................................................................................................................

24

When parking brake applied .....................................................................................................................

25

TFT monitor swiveling mechanism overloaded protection ........................................................................

25

2

 

Touch screen operations ..................................................................................................................................

26

General operations...........................................................................................................................................

28

Reset the unit ............................................................................................................................................

28

Power on/off .............................................................................................................................................

28

Volume control .........................................................................................................................................

28

Mute function ...........................................................................................................................................

28

Mode selecting .........................................................................................................................................

28

Setting the audio system ...........................................................................................................................

29

Display operations ....................................................................................................................................

30

Auto brightness control.............................................................................................................................

30

Line mute .................................................................................................................................................

30

Digital tuner operations ...................................................................................................................................

31

Mode selecting .........................................................................................................................................

31

Band selection ..........................................................................................................................................

32

Manual/ automatic tuning .........................................................................................................................

32

Programming tuner stations ......................................................................................................................

33

AMS (Auto Memory Store) function ........................................................................................................

33

Preset scan................................................................................................................................................

33

Local radio station seeking (LOC) ............................................................................................................

34

AF (Alternative Frequencies) function ......................................................................................................

34

TA (Traffic Alarm) function ......................................................................................................................

34

PTY (Program Type) function ...................................................................................................................

35

Region function ........................................................................................................................................

36

RDS clock ................................................................................................................................................

36

3

SD/MMC card .................................................................................................................................................

37

Mode selecting .........................................................................................................................................

37

User touch screen interface .......................................................................................................................

38

SD card operations....................................................................................................................................

38

Disc operations ................................................................................................................................................

40

Glossary ...................................................................................................................................................

40

Discs for playback ....................................................................................................................................

41

Loading a disc ..........................................................................................................................................

42

Mode selecting .........................................................................................................................................

42

Playing/ pausing .......................................................................................................................................

42

Stop ..........................................................................................................................................................

42

Playing the previous/next chapter/track.....................................................................................................

43

Scanning forward and backward ...............................................................................................................

43

Slow playback ..........................................................................................................................................

43

Alter between 2 Ch and 6 Ch ....................................................................................................................

44

Repeat playback........................................................................................................................................

45

Repeat A-B function (for DVD/CD/VCD discs)........................................................................................

45

Random playback (for DVD/CD/VCD/MP3 discs) ...................................................................................

45

Intro playback (for CDDA/VCD discs) .....................................................................................................

45

GOTO function(for DVD/VCD discs).......................................................................................................

46

Direct chapter/ track selection ...................................................................................................................

47

Audio track and channel selection (for CD/VCD/DVD discs) ...................................................................

47

Disc menu (for DVD only) .......................................................................................................................

47

PBC (Playback Control) function (for VCD only) .....................................................................................

48

Changing size (for DVD/VCD discs) ........................................................................................................

48

4

Changing the subtitle language (for DVD only) ........................................................................................

48

Changing angle (for DVD only)................................................................................................................

48

On-screen display (OSD) ..........................................................................................................................

49

MP3/WMA files playback ........................................................................................................................

50

MP3 overview ..........................................................................................................................................

51

System setup menu ..........................................................................................................................................

53

Audio sound processing (ASP) configuration............................................................................................

54

General setup............................................................................................................................................

55

RDS setup.................................................................................................................................................

56

Screen CAL ..............................................................................................................................................

57

DVD setup menu .............................................................................................................................................

58

Language ..................................................................................................................................................

59

Video ........................................................................................................................................................

59

Audio .......................................................................................................................................................

60

SPK configuration ....................................................................................................................................

61

Surround FX .............................................................................................................................................

62

Rating .......................................................................................................................................................

64

Other playback modes .....................................................................................................................................

65

AUX-IN mode ..........................................................................................................................................

65

Rear view video camera............................................................................................................................

66

RGB input ................................................................................................................................................

66

Handling and cleaning discs ............................................................................................................................

67

Cleaning ...................................................................................................................................................

67

Troubleshooting guide .....................................................................................................................................

68

Specification....................................................................................................................................................

69

5

Important safeguards

Using the device at temperature below -10º may cause the breakage of the device. BEFORE USING PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE!

Read carefully through this manual to familiarize yourself with this high-quality sound system.

Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit.

DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.

Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such as electrical shock or laser beam exposure.

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help.

Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a thunderstorm.

Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the system.

The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm it before installation.

Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn out the power amplifier.

Install the unit horizontally. Install the unit more than 30 degree vertically may result in worse performance.

Do not block the cooling fan exit to ensure sufficient heating dissipation of this unit, failure to do this may result in damage to this unit.

6

Multizone device description

Multizone definition means the ability of using the head device as the two synchronous signals source.

For example by means of the two different signals distribution the user can listen to the radio or see the navigation information on the screen (the first zone), and the back passengers can look the DVD film at the same time (the second zone). In first case the audio signal will be reproduced by front speaker, and in second case by rear speaker.

The variants of distributing are different and its amount depends on used audio and video sources.

7

Installation/ connection

Method 1

If the meter panel of your car has a two-din dash, and the fireproofing board is capable of screw cap, you could choose this method.

1.Insert mounting bracket (2) into the dashboard (1), select the appropriate tabs and bend them out with a screwdriver.

2.Screw a specialized M5 bolt to the screw at the empennage of this unit.

3.Screw down the fix up iron bar with the fireproofing board.

4.Put the unit into the dash and screw down the M5 bolt with the fireproofing board.

Method 2

Step 1. Mounting sleeve

Install the mounting sleeve into the dashboard or adapter, please read below drawing.

8

Bend the appropriate tabs to hold the sleeve firmly in place.

Note: Locate 12 bend tags along the top, bottom and sides of the mounting sleeve, with the sleeve fully inserted into the dashboard opening, bend as many as of the tags outward as necessary so that the sleeve is firmly secured to the dashboard.

Step 2: Install bracket

Please use holes marked ( ).

Please refer to installation manual.

9

Bracket

Step 3: Insert head unit into the sleeve

Please fix brackets on both sides of the head unit and insert head unit into the mounting sleeve

10

Step 4: Install trim ring

Press tags located in the inside of trim ring to the hole of trim ring, here to. Installations are completed.

11

Electrical connection

12

Caution: For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car dealer before installing this unit.

Using the ISO Connector

1.If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.

2.For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit.

3.Cut the connector, connect the colored leads of the power cord to the car battery as shown in the wiring diagram.

13

Parking brake cable connections

Note: for safety purpose professional installation for the following connections is recommended.

For cars with hand brake

For cars with foot brake

Rear view video camera

14

Unit controls

Monitor

1.POWER/MUTE button

Press the button to turn the power on, press and hold for 2 seconds to turn the power off. When the power is on press it to cut down the volume output, press it again to resume volume.

15

2.SEL/LOC/DX button

Press it (the SEL button) to enter audio setting mode. Press it again or press the cursor buttons to select the setting. Press the cursor buttons or the VOL +/- buttons to adjust setting.

In TUNER (RADIO) mode press it (LOC/DX button) and hold for 2 seconds to select the LOCAL or DISTANT mode for radio station searching.

3.VOL + button

Press to increase volume step by step.

4.VOL button

Press to decrease volume step by step.

5.TUNER button

Press it to select the band.

6.Cursor button

In disc playback mode press the buttons to go to next chapter or track. In the menu press to move right.

In TUNER (RADIO) mode press shortly to go increase tuning frequency step by step. Press and hold for 2 seconds to start automatic station searching forward.

7.Cursor button

In disc playback mode press the button to fast forward. In the menu press to move up.

8.Cursor button

In disc playback mode press the buttons to go to previous chapter or track. In the menu press to move left.

In TUNER (RADIO) mode press shortly to go to decrease tuning frequency step by step. Press and hold for 2 seconds to start automatic station searching backward.

16

9.PLAY/PAUSE / ENTER / SCAN button

In DVD mode press it to start the playback. Press again to pause playback. Press it to resume playback. In the menu press the ENTER button to confirm adjustment.

In TUNER (RADIO) mode press the SCAN button to start scan playing of the radio stations. Press and hold it for 2 seconds to preset the radio stations automatically.

10.Cursor button

In disc playback mode press the button to slow backward/ slow forward. In the menu press to move down.

11.MENU/SRC button

Press to enter/exit playing source menu.

12.WIDE/PIC button

Press it to adjust display aspect.

Press it and hold for 2 seconds to enter setting mode. To adjust the setting press the buttons or CH +/- buttons. Press it and hold for 2 seconds to exit the mode.

13.DISP button

Use this button to show the playback info on the display.

14.CH+ button

Short press to play a next preset FM/AM station. Long press to adjust the monitor position.

15.CHbutton

Short press to play a previous stored FM/AM station. Long press to adjust the monitor position.

16.SD button

Short press to enter SD card source.

17

17.DVD/2-6CH button

Short press to enter DVD mode.

Long press to select 2-channel or 6-channel audio in DVD player and SD card reader.

18.OPEN button

Short press to slide down/ up monitor.

Rear side

19.EJECT button

Press this button to eject the disc.

20.Disc slot

21.Disc indicator

22.SD card slot

18

Remote control 1 (general)

1.EJECT button Open the panel and eject the disc.

2.SRC button - Select the playback source.

3.MUTE button - Toggle on / off volume output

4.POWER button - Turn on / off the power

5.TITLE button - Enter the title menu of the disc (in DVD source).

6.MENU button - Enter the main menu of the disc (in DVD source). Turn on PBC when playing VCD.

7.AUDIO button - Change the audio language during playback DVD. Change the channel during playback VCD.

8.SUBTITLE button - Alter subtitle language during playback a DVD disc.

9.ANGLE button - Playback a DVD disc in different angle on a scene. Playback Picture CD with different angles of picture displayed.

10.DISP button - Display playback information

11.REPT A-B button - Setup to repeat playback from time frame A to time frame B (in DVD source).

12.REPT button - Setup to repeat playback each chapter/ title disc (in DVD source).

13.OPEN/CLOSE button - Open/Close the monitor.

14.WIDE button - Select aspect ratio mode.

15.ANGLE/ button - Decrease monitor tilting angle position step by step.

16.ANGLE/ button - Increase monitor tilting angle position step by step.

17.DISC button - Select the next disc to playback in DVDC source (Not supported by this unit).

19

18.DISC button - Select the previous disc to playback in DVDC source (Not supported by this unit).

19.VOLbutton - Decrease volume.

20.VOL+ button - Increase volume.

21.STOP/BAND button - stop playback, select FM/AM band.

22.8 button - Fast forward the current disc in DVD source. During menu setup, move to upper selection.

23.SCN button - Play the first ten second of each chapter in DVD player.

24.RDM button - Play all chapters in random order in DVD player.

25.9 button - Select the previous track/chapter for playback. During menu setup, move to left selection. Searching an available FM/AM radio station by decreasing tuning frequency.

26.PLAY/PAUSE button - Pause playback. Start playback. Act as ENTER for menu setup. Scan tuning FM/AM radio station playback.

27.: button - Select the next track / chapter to playback. During menu setup, move to the right selection. Searching an available FM/AM radio station by increasing tuning frequency.

28.SEL button - Enter/Exit the audio adjustment mode.

29.GOTO button Go to specific time frame and playback

30. button - Slow playback the disc in DVD source. Slow rewind playback the disc in DVD source. During menu setup, move to the lower selection.

31.ZOOM button - Zoom in image during playback DVD/VCD disc.

32.PIC button - Press it to enter setting mode. To adjust the setting press the 9/: buttons. Press it again to exit the mode.

33.Numeric keypad

34.DVD SETUP button - Playback function setup for DVD player.

35.SYS SETUP button - System function setup of the unit.

20

Remote control 2 (kid zone)

1.MUTE button - Turn on / off volume output.

2.R.SRC button - Playing source selection for rear zone.

3.TITLE button - Enter the title menu of the disc (in DVD Player).

4.MENU button - Enter the main menu of the disc (in DVD Source). Turn on PBC when playing the VCD disc.

5.AUDIO button - Change the audio language during playback DVD. Change the channel during playback VCD.

6.SUBTITLE button - Language selection for subtitle (in DVD source).

7.9 button - Select the previous track / chapter for playback. During menu setup, move cursor to the left selection.

8.: button - Select the next track / chapter for playback. During menu setup, move cursor to the right selection.

9.8 button - In DVD source, fast forward the disc content.

10. button - Slow playback (in DVD source). Slow rewind playback (in DVD source). During menu setup, move to the lower selection.

11.PLAY/PAUSE button - Pause playback. Start playback. Act as ENTER for menu setup.

12.Numeric keypad

13.REPT button - Setup to repeat playback each chapter/ title / disc.

14.GOTO button Go to specific time frame and playback.

21

Changing the battery

1.Press the catch and at the same time pull out the battery tray (pic. 1).

2.Insert the 1 x lithium battery, type CR2025 (3V) battery with the stamped (+)

mark facing upward. Insert the battery tray into the remote control (pic. 2). Pic. 1 Pic. 2

Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately.

Do not recharge, short, disassemble or heat the battery or dispose it in a fire.

Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to give off heat, crack or start a fire.

When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give off heat, crack or start a fire.

22

Monitor operations

Open/close TFT monitor

Short press OPEN button on the front panel or press the EJECT button of the remote control to open/close the monitor.

TFT monitor auto open

1.Press the SYS SETUP button on the RC to enter the System setup menu.

2.Touch the General setup item or press the button on the RC1 to select the General setup menu, press the PLAY/PAUSE button to enter it.

3.Touch the TFT auto open item or press the button on the RC1 to select this item.

4.Touch ON or OFF or press the button on the RC1 to select the setting.

On (when the unit is off the monitor draws down into the unit automatically, when it s on the monitor unfurls automatically);

Off (when the unit is off the monitor draws down into the unit automatically, when it s on the monitor unfurls by pressing the OPEN button on the panel or OPEN/CLOSE button on the RC).

5.Touch the BACK button in the top right corner of the screen to return to previous menu or press the button on the RC1 until select the BACK button, then press the PLAY/PAUSE button to return to previous menu.

Monitor tilting position adjustment

Long press CH+/- button on front panel or ANGLE / button on remote control to adjust the monitor's

position.

23

Aspect ratio

The aspect ratio alters according to the following while pressing the WIDE button on the front panel or the remote control FULL -> WIDE -> NORMAL -> OFF.

FULL - The screen is extended horizontally as a whole to the aspect ratio of 16 to 9. The extension ratio is the same at any point of the screen.

WIDE - The screen is extended horizontally to the aspect ratio of 16 to 9. The extension ratio increases toward the right and left end of the screen.

NORMAL - The conventional display image has a 4 to 3 ratio of horizontal to vertical. In this case, a blank area remains on the right and left sides of the display.

Image setting

The video output format for the each playing source is listed as below:

Playing source

Video output format

TUNER

RGB mode

DVD

RGB mode

AUX IN

CVBS mode

CAMERA

CVBS mode

RGB

RGB mode

1.Press the PIC button on the RC or press and hold for 2 seconds the WIDE/PIC button on the monitor to open the image adjustment menu.

24

2.Press the 8/ button on the RC or the buttons on the monitor to select setting: PICTURE, COLOR, CONTRAST, BRIGHT, TINT.

In RGB mode, only BRIGHT is available for adjustment.

In CVBS mode, PICTURE, COLOR, CONTRAST, BRIGHT and TINT are available for adjustment.

3.Press the 9/: buttons on the RC or the on the monitor to adjust the selected setting.

4.Press the PIC button on the RC or the WIDE/PIC on the monitor to save setting.

When parking brake applied

If "PRKSW" cable is connected to hand brake switch, the video view to the TFT monitor will be switched to between normal display and caution sentence by this function.

Parking cable function ceases upon "Parking" is "Off" or the playing source is CAMERA.

When "Parking" is "On", the monitor display the following screen to prevent the driver watching other content during driving. The passengers at the rear can watch normally.

TFT monitor swiveling mechanism overloaded protection

During the TFT movement, once the monitor is overloaded by blocking or unclear moving path, its motion is ceased automatically to protect the mechanism.

25

Touch screen operations

Press the MENU/SRC button on the panel to get main menu, and you can select a playing source or make setup on system and DVD player by touch button.

Touch Operation On DVD Player

Positions of touch buttons are showed in the screen, they indicate their functions on DVD player operation.

A - Enter the MAIN MENU in every source.

B - Function of the DISP button display playing information.

C- Enter the MULTI-ZONE MENU.

D- Select the previous chapter for playback.

E- Select the next chapter for playback.

F- Eject these touch buttons: MENU, , , 9/:, 7, 8.

26

Touch operation on radio

Positions of touch buttons are showed in the screen, they indicate their functions on radio operations.

Touch operation on SD card

Positions of touch buttons are showed in the screen, they indicate their functions on SD card operation.

27

General operations

Reset the unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the RESET button on the front panel to restore the unit to the original factory settings.

Power on/off

Press POWER/MUTE button on the front panel or the POWER button on the RC to turn the unit on. Press and hold the POWER/MUTE button for 2 seconds or press the POWER button on the RC to turn the unit power off. Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the unit on it will resume the stored status that you set.

Volume control

Press the VOL + on the RC or on the panel to increase the volume level.

Press the VOL - on the RC or on the panel to decrease the volume level.

Mute function

When the unit power is on press the POWER/MUTE button on the panel or the MUTE button on the RC to mute volume control. Press it again or press the VOL +/- button to resume the volume.

Mode selecting

Short press the MENU/SRC button on front panel to get playback source menu, and press the direction button on the remote control or of the joystick to select a playback source (or touch the touch key): TUNER => DVD => SD CARD => AUX IN => RGB IN => CAMERA.

28

Then press PLAY/PAUSE button or press the joystick uprightly to enter the selected source. OR press the corresponding button on the monitor: TUNER, SD, DVD.

OR press the SRC button on the RC repeatedly to select the source: for the 1st zone on the main RC, for the 2nd zone on the RC 2.

Setting the audio system

Audio control allows you to easily adjust the audio system to meet the in-car acoustic characteristics that vary depending on the type of car and its measurement to get the best possible sound spaciousness, be sure to make setting for the speakers as well, making setting for "FADER" and "BALANCE" boots the effect of the cabin equalizer.

1.Short pressing SEL button on the front panel, "Audio" menu is displayed.

2.Pressing 9/: button on remote control, or press / of the joystick to select the audio item for adjustment: EQ => BASS => TREBLE => FADER => BALANCE => SUBWOOFER => LOUD.

3.Press the volume button or press 8/ on the remote control, or press of joystick.

4.Exit Audio Control Mode Long press SEL button on the front panel or stop the operation for a few seconds. Note: Select EQ according to this sequence: User => Flat => Jazz => Pop => Classic => Rock => Vocal. Different EQ reflects in different Bass level and Treble level and the Bass and Treble level could be adjusted only in User (user setting) mode.

The LOUD function compensates deficiencies in the low and high sound ranges at low volume. You can select a desired Loudness level.

29

Display operations

Press the DISP button on the monitor or on the RC to show the playback information on the screen.

Auto brightness control

To avoid the display being too bright at night time, if the cable for headlight is connected to ILLUMI, turning on the headlight dim the backlight of TFT and vice versa.

Line mute

If the MUTE is connected, other audio output mutes when a telephone call is received by the car phone or the verbal navigation is performed.

30

Digital tuner operations

Note: RDS service is available in M broadcasting only. RDS service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. To activate this function enter the RDS SETUP menu (please refer to SYSTEM SETUP menu chapter of this manual).

Mode selecting

Press TUNER button on the front panel to switch directly to RADIO TUNER source, or press SRC button on the remote control to switch to RADIO TUNER source, the following user interface appears:

Pic. 1 Pic. 2

The second window is opened when the multizone function is activated or when the monitor doesn t show the video files.

1.Band

2.Indicators of RDS options: AF, TA, TP, PTY

31

3.Current radio frequency

4.Clock

5.Indicator for strong signal receipt of local radio station LOC

6.Indicator for receiving the stereo broadcast

7.P1 P6 preset radio stations (they are touch buttons), press to recall preset station to playback

8.PTY program type

9.Touch buttons

10.MULTI-ZONE menu: touch to open the multizone sources menu

11.PS program service

12.For multizone function: shows the signal source for 1st zone

13.For multizone function: shows the signal source for 2nd zone.

To return to main menu touch the TUNER button in the top left corner of the display.

Band selection

Press TUNER button on the front panel, or BAND button on the remote control, or press BAND button on the touch screen to switch to the bands among FM and AM band.

Manual/ automatic tuning

Manual tuning: Short press / buttons on the joystick once, or press 9/ : buttons on the touch screen repeatedly to select a station upward or downward step by step.

Automatic tuning: Long press 9/ : button on the remote control, or / button of the joystick, or press 9/ : button on the touch screen, to start seeking for next available radio station by increasing tuning

frequency. Press these buttons again to stop the searching.

32

Programming tuner stations

You can store up to a total of 36 radio stations in the memory (24 FM, 12 AM), manually or automatically.

To store a station:

-Select a band (if needed)

-Select a station by buttons

-Hold a Preset button (1-6) that you want store the station for at least 2 seconds.

To recall a station:

-Select a band (if needed)

-Press a Preset button (1-6) briefly to recall the stored station

AMS (Auto Memory Store) function

Select the band. Long press TA button on the joystick or press AS button on the touch screen to tune all the radio stations in range from the current frequency, and auto store 6 radio stations with the strongest radio signals in P1 to P6 respectively according to frequency from low to high.

The search will stop when it makes the hole loop. To stop auto store, press AS button again.

Preset scan

Short press button 1 to 6 on the remote control or press P1 - P6 on the touch screen to load the preset radio stations from P1 to P6 for playback. Buttons 1 to 6 corresponds to station P1 to P6.

Short press TA button of joystick or PLAY/PAUSE button on the remote control, searching all the radio stations in range from the current frequency, playing the station for 10 seconds once a radio station is located and continue to search.

Press other tuning function buttons to cease the radio scan tuning.

33

Local radio station seeking (LOC)

When the LOCAL function is on only the stations with strong radio signal can be played.

1.Long press the SEL/LOC/DX button on the front panel or LOC button on the touch screen to turn the LOCAL function on.

2.Long press the SEL/LOC/DX button again will turn off LOCAL, the indicator of LOC on TFT lit off.

AF (Alternative Frequencies) function

When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search another station with the same PI (Program Identification) as the current station but with stronger signal strength. Press the TUNER button on the panel and hold for 2 seconds to turn ON or turn OFF the AF function.

If RDS service is not available in your area, turn off the AF mode. Default setting is ON.

TA (Traffic Alarm) function

The TA (Traffic Announcement standby) function lets you receive traffic announcements automatically, no matter what source you are listening to. The TA function can be activated for a TP station (a station that broadcasts traffic information).

In TUNER (RADIO) mode press the button on the panel and hold for 2 seconds to turn ON or turn OFF the TA function.

In TA mode press the 9/ : buttons on the RC or the / on the panel to start the traffic announcement program searching until the program is received.

After the traffic announcement is over, it will return to the previous mode and volume level. When TA is turned on, SEEK, SCAN, AS function can only be received or saved when traffic program identification (TP) code is received.

34

PTY (Program Type) function

Selecting the PTY

1.In TUNER (RADIO) mode press the button on the panel and hold for 2 seconds to turn ON or turn OFF the PTY function.

2.In PTY mode press the 8/ buttons on the RC or the / on the panel to select the desired program type: None, News, Speech, Music, Document, Fock M, Oldies, Nation M, Country, Jazz, Leisure, Travel, Phone in, Religion, Social, Children, Finance, Weather, Other M, Classics, Light M, Easy M, Rock M, Pop M, Varied, Science, Culture, Drama, Educate, Sport, Info, Affairs, News.

3.When PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding PTY information is detected.

During 1 loop, if desired PTY is not found, NONE is flashed, then return to previous normal radio and PTY word disappears.

After searching if no buttons are pressed during 3 seconds the PTY function turns off.

During the searching of PTY (PTY is ON), "PTY" was shown and blinked on the TFT. PTY indicator was lit up.

Saving the PTY

When the PTY function is on and the unit receives the current program type press the 1~6 button to store it into the channel selected. The default preset channels: P1 DNEWS, P2 DSPEECH, P3 DSPORT, P4 DPOP M, P5 CLASSIC, P6 DMUSIC.

Quick PTY searching

When the PTY function is on press the preset button 1~6 to choose the desired program type.

PTY alarm

If the tuner receives the alarm code, ALARM is displayed and the tuner switches to receive the emergency announcement.

35

Region function

To activate this function enter the RDS SETUP menu (please refer to SYSTEM SETUP menu chapter of this manual).

When the AF function is on and REGION is set ON, auto tuning for these stations within the region is assigned. When the AF function is on and REGION is set OFF, auto tuning for these stations without any region is boundary.

RDS clock

Some stations broadcast the time and date within the encoded RDS signal. The time is automatically adjusted according the RDS one when CT is set to ON.

36

SD/MMC card

SD/MMC notes:

1.SD/ MMC card support, 2in1 (SD/ MMC) support.

2.FAT 12/ FAT 16/ FAT 32 is possible

-FAT 12/16 (dir: 200 support, file:500 support),

-FAT 32 (dir: 200 support, file:500 support).

3.Filename: 32 byte/ Dir name: 32byte.

4.Tag (id3tag ver2.0)

- Title/ Artist/ Album: 32 byte support.

5.Multi card reader not support.

SD cards brands: Cannon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, Sharp, Samsung, etc. Capacity: 8 MB ~ 1 GB.

MMC cards brands: Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, etc. Capacity: 16 MB ~ 1 GB.

Mode selecting

Press the SD button on the monitor.

OR press the SRC button on the RC repeatedly to select the SD source: for the 1st zone on the main RC, for the 2nd zone on the RC 2.

37

User touch screen interface

1."1/40" current track/total tracks.

"00 : 00 : 27"-current track playback time.

2."01:08" clock.

3."Repeat" - single track repeat playback, it is a touch screen button.

"Random" - random playback track, it is a touch screen button.

4.Play back folder display.

5.Name of the song display, it is a touch screen button, press the song name to playback it.

6.Display some information on the playing file.

7.Buttons of the touch screen: PLAY/PAUSE playback, STOP payback, PAGE- (previous page file menu), PAGE+ (next page file menu), DIR- (previous directory), DIR+ (next directory).

SD card operations

Play/pause playback

Press the PLAY/PAUSE button on the touch screen or on the remote control, or press the joystick.

Stop playback

Press the STOP button on the touch screen or STOP/BAND on the remote control.

Repeat playback

Press the REPEAT button on the touch screen or REPT button on the remote control.

Shuffle playback

Press the RANDOM button on the touch screen or RDM button on the remote control. 38

Playback previous/next chapter

Press 9/: button on the remote control or button on the monitor.

Switch the directory

Press DIR+/ DIRbutton on the touch screen to switch to previous/next directory.

Previous/next page

Press PAGE+ / PAGEbutton on the touch screen to switch to previous/next page.

Audio track selection

Press AUDIO button on the remote control to alter audio.

Direct chapter/track selection

You can use the numeric button on the remote control to access a track directly.

By pressing the song name showed on the touch screen directly you can also access a track.

39

Disc operations

Glossary

PBC (PlayBack Control)

PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. And if the disc contains still images, it can playback high definition of still image.

Title

The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to record several films on one disc. For example, if a disc contains three films, they may be divided into Title 1, Title 2 and Title 3. You can easy use the functions of looking-for.

Chapter

A title can be divided into several blocks, so that every block can be operated as a unit, the unit is called chapter. The chapter contains a unit at least.

Track

It is the biggest component of VCD. Generally, every song of karaoke disc is a track.

40

Discs for playback

This unit can play disc types: CD/DVD/CDDA/CD-R/-RW/DVD±R/±RW.

Compatible with formats: DVD-video/SVCD/VCD/HDCD/MP3/MP4/WMA/Picture-CD/JPEG.

The following file types are supported: Audio files: MP3 (*.mp3)

WMA (*.wma)

Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob)

MPEG 1(*.dat) Picture file: JPEG (*.jpg)

ISO 9660 or ISO 9660 +Joliet format - Max. 30 characters

Max. Track number is 448

Max. nested directory is 8 levels

The max. album number is 99

The max. length of each track is 99 minutes 59 seconds

Supported sampling frequency for MP3 disc: 8 KHz 48 KHz (44.1 KHz preferably)

Supported bit-rates of MP3 disc are: 32 - 320 kbps (128 kbps preferably).

Following formats are NOT supported *.ACC, *.DLF, *.M3U, *.PLS, MP3 PRO, files with DRM.

Open session discs are NOT supported.

41

Loading a disc

1.Turn the power on.

2.Press OPEN button on the panel or OPEN/CLOSE on the RC to slide the monitor down, insert the disc into the slot. The monitor will be closed automatically. The unit will switch to DVD mode.

3.Press the OPEN button on the panel and then press the EJECT button on the inner panel to eject the disc. OR press the EJECT button on the RC, the monitor will be opened automatically and the disc will go out. The monitor will be closed in 5 seconds; if you haven t taken the disc it will be loaded again.

Mode selecting

Press the DVD button on the monitor.

OR press the SRC button on the RC repeatedly to select the DVD source: for the 1st zone on the main RC, for the 2nd zone on the RC 2.

Playing/ pausing

To ensure good system performance, wait until the unit finishes reading the disc information before proceeding. After the disc is on playback will start automatically.

Press the joystick upright or press PLAY/ PAUSE button on the RC to start/ pause the playback. In pause mode press it again to resume the playback.

Stop

1.During playback press the STOP/BAND button on the RC. Playback will be stopped. If the PLAY/ PAUSE button is pressed, playback will start from the position at which it was stopped. If the disc is removed, the resume function is cancelled.

42

2.Press the STOP/BAND button again to finally stop the playback. If the PLAY/ PAUSE button is pressed, playback will start from the very beginning.

Playing the previous/next chapter/track

1.During playback press the 9 button on the RC or the button of the joystick to start playback of the current chapter/track from the beginning. Press again to start playback of the previous chapter/track.

2.Press the : button on the RC or the button of the joystick to start playing of the next chapter/track.

Scanning forward and backward

1.Press the 8 button on the RC or button of the joystick to select the speed of fast playing in forward direction: X2 => X4 => X8 => X20. Press the PLAY/PAUSE button on the RC or press the joystick upright

to return to normal playback.

Note: During the disc playback when Fast Playback gets to the beginning of the playing another track, it resumes normal playback.

2.To select the speed of fast playing in backward/ forward direction use the touch screen 7/8 buttons. The speed will change the following way: X2 => X4 => X8 => X20. Press the PLAY/PAUSE button on the RC or press the joystick upright to return to normal playback.

Slow playback

1.During DVD/VCD playback press the button on the RC or the button of the joystick repeatedly to start slow forward playback. The speed will change the following way: 1/2 => 1/4 => 1/6 => 1/7 (forward), 1/2 => 1/4 => 1/6 => 1/7 (backward).

2.Press the PLAY/PAUSE button on the RC or press the joystick upright to return to normal playback.

Note: During the disc playback when Slow Playback gets to the beginning of the playing another track, it resumes normal playback.

43

Alter between 2 Ch and 6 Ch

Each playing source has 2-channels of audio output. Some have 6-channels output.

Playing source

Channel

 

 

TUNER

2-Channel

 

 

DVD

2/6-Channel

 

 

AUX IN

2-Channel

 

 

CAMERA

2-Channel

 

 

SD CARD

2/6-Channel

 

 

RGB

2-Channel

 

 

To select 2- or 6-channel system press the DVD/2-6CH button on the monitor.

According to the channel selected and the speaker setup audio output varies according the table:

Description

Front

Rear

Center

Subwoof

 

speakers

speakers

speaker

er

2-channel mode

 

 

 

 

Play the 2-channel audio in 6-channel mode

 

 

 

 

without Dolby Pro-Logic function.

 

 

 

 

 

 

 

 

 

 

 

 

Play the 2-channel audio in 6-channel mode with

 

 

 

 

Dolby Pro-Logic function.

 

 

 

 

 

 

 

 

 

Play the 6-channel audio in the 6-channel mode.

 

 

 

 

44

+ 102 hidden pages