Hyundai E321D, E371D, E261D User Manual

3.42 Mb
Loading...

FCC Information

User Instructions

The Federal Communications Commission Radio Frequency Interference Statement includes thefollowing warning :

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital devicepursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particularinstallation.

If this equipment does cause harmful interference to radio or television receptions, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures :

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.

Consult the dealer or an experienced radio/TV technician for assistance.

User Information

Changes or modifications not expressly approved by the party responsible for compliance could voidthe user’s authority to operate the equipment.Connecting of peripherals requires the use of grounded shielded signal cables.

HYUNDAI LCD TV

Important Tip

Image Retention Effect (Image Sticking)

1.

Cause :

-

Image Retention Effect may come from displaying a still picture in certain period of time with at a

 

certain area continuously, as the feature of LCD panel. This is caused due to brightness degradation.

 

Many LCD manufacturers are trying to overcome this limitation.

2.

Prevention

-To avoid this matter, use the product after reducing brightness and contrast, especially when a still image is displaying for a long time. (Contrast 50/Brightness 50 - See 34 page)

Once image retention occurs, use the mode that displays more motion pictures. It will help reduce this matter.

3. Solution

-The temporary image sticking would decrease with displaying Full-White pattern during 10 hours.

*The permanent image sticking could not take off under the latest technology.

This method may be used to eliminate a temporary retained image that occurs after displaying a still image for a certain period of time. Since it may take several minutes to several hours to remove image sticking, it is recommendable to display motion pictures during 2~3 minutes every hour when keeping displaying a still image. As image sticking is influenced by the brightness of a still image being displayed and its display time, it is recommended that you reduce the brightness of the screen when displaying a still image for a long time.

* Image Sticking does not come under the warranty.

Image Sticking Precaution

When watching a still Image within motion pictures and Wide/4:3 screen

Wide, 4:3 screen

Box still image

1. Note :

-When the central area of the screen and the screen edges are fixed, the different brightness level of the edges may cause image retention on the edges when watching for a long time

-This phenomenon is the same matter to other LCD manufacturers. Please do not watch a still image for a long time.

-If you watch a still image for a long time, this may damage your TV.

* This matter does not come under the warranty.

HYUNDAI LCD TV

Features

Integrated HDTV

An HDTV has a built-in ATSC digital tuner.

It does not need a separate set-top box to receive over the-air DTV signal.

Dual Scan/Multi-Viewing

You can program analog TV broadcasting and digital TV broadcasting automatically at the same time for multi-viewing.

A Wide Array of Screen Settings

You can choose different screen settings depending on the type of program you are watching or the surrounding conditions (the outside weather conditions). You can switch among Standard, and Mild options or you can configure the screen settings for yourself.

A Wide Array of Sound Settings

You can choose an optimal sound setting for the type of program you are watching.

You can switch among custuom Standard, movies, Music, and Speech options or you can configure the sound settings for yourself.

Favorite Channel Memory

You can memorize the channels you are watching frequently.

SRS TrueSurround XT

You can enjoy dynamic and surround sound with ordinary speakers.

Dolby Digital

When receiving digital broadcast signal, you can enjoy dynamic and surround sound with two ordinary speakers just like Dolby Digital 5.1.

A Variety of Aspect Ratios

You can adjust the screen size at your preference.

Table of Contents

General Information

 

Safety Precaution ................................................................

5

Contents of the Package .......................................................

9

Products Sold Separately ......................................................

9

Parts Names and Functions ................................................

10

Remote Control ...................................................................

14

Connections

 

How to Watch Both Analog and Digital Broadcasts

 

with a Single Antenna .........................................................

16

Before Connecting the Video/Audio Connections to

 

External Devices... .............................................................17

How to Connect a VCR/Cable Receiver ................................

18

How to Connect a SET TO Box or DVD Player ......................

19

How to Connect a Camcorder/Game Player .........................

20

How to Connect to a PC ......................................................

21

HDMI Connection ................................................................

23

How to Connect an External Visual Device ...........................

25

How to Use Digital Sound ....................................................

26

Channel Setup

 

How to Select Tuner Mode ..................................................

27

How to Store Channels Automatically ..................................

28

How to Add/Erase Channels Manually .................................

29

How to Set Channel Edit and Favorite Channels ..................

30

How to See Signal Strength ................................................

31

How to the Input Mode ........................................................

32

Picture Setup

 

How to Select the Picture Mode ..........................................

33

How to Set the Desired Picture ...........................................

34

How to Select the Aspect Ratio ...........................................

35

Sound Setup

 

How to Select the Audio Mode ............................................

36

How to Adjust the Desired Audio Mode ..............................

37

How to Use the Automatic Volume Control ..........................

38

How to Listen to SRS TruSurround XT (Surround) ................

39

HYUNDAI LCD TV

How to Set Audio Language ................................................

40

How to Set the Digital Audio Output ....................................

41

Function Setup

 

How to Set Auto Lock .........................................................

42

How To Set Block Program .................................................

44

How to View Closed Captions ..............................................

46

How to Set EPG View ..........................................................

49

Setup

 

How to the Set Date/Time ...................................................

50

How to the Set Power on Time ............................................

51

How to the Set Power off Time ............................................

52

How to the Set Sleep Time ..................................................

53

How to Choose Menu Language ..........................................

54

How to Set Menu Opacify ....................................................

55

How to Set Emergency Alert ...............................................

56

How to Set Geometry In PC Mode .......................................

57

Appendix

 

Glossary .............................................................................

58

Troubleshooting ..................................................................

61

Care and Cleaning ..............................................................

63

Product Specifications ........................................................

64

GENERAL INFORMATION

Safety Precaution

The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using.

Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Example of Grounding According to National Electrical Code Instruction

Do not connect multiple electrical appliances to a single outlet.

-It may cause a fire due to overheating from the outlet.

Make sure to remove the speakers before moving the TV with speakers mounted on it.

- When the speakers are detached from the unit while carrying it, this may cause damage to the unit or personal injury.

Do not use or store a flammable spray or inflammable things near the TV.

- They may cause explosion or fire.

Do not install the TV in a bookshelf, closet, or a place where there is poor air circulation.

-Fire may be caused due to the rise of internal temperature.

Any necessary action such as making the antenna cable loop at the entrance of the building should be taken to prevent rainwater on the outdoor antenna cable from possibly running into the indoor.

-If raindrop gets into the LCD TV, it may cause a fire or an electric shock.

5

HYUNDAI LCD TV

If there is a persistent accumulation

Do not use a damaged power cord

of dusts or water on the plug, please

or plug, or loose outlet.

make sure to wipe it off using a dry

- It may cause electric shock or fire.

cloth.

 

- It may cause a fire or an electric shock.

 

Firmly plug in the power cord so that it does not pull out.

- An unstable connection may cause fire.

Do not install in a place where there is oil, smoke, excessive humidity, or where water may be sprinkled on it.

- This may cause electric shock or fire.

Do not put a water bowl, vase, candle, bug repellant smoke, cigarette, plants, or heavy thing on the TV.

- It may cause electric shock or fire and also heavy things may cause injury when they fall.

Do not install on an unstable place or small support.

-This may cause the TV to fall, resulting in serious injury to a child or adult.

Never attempt to open, fix, or modify your TV.

-When there is a need for fixing, call a service center. Fire or electric shock may be caused.

When the TV produces abnormal noise, burning smell, or smoke, unplug the TV immediately and call a service center.

- Electric shock or fire may be caused.

Do not put a metallic object like chopstick, wire, or puncher or inflammables like paper or a match in a vent, headphone jack, or AV jacks of the TV.

- Electric shock or fire may be caused.

INFORMATION GENERAL

6

GENERAL INFORMATION

Safety Precaution ......................................

Continued from previous page

The contents of this section are provided for the safety of users and their property.

Please read the instructions carefully before using.

Do not block ventilating slits with a table cloth.

- Blocking the ventilation slits may produce inner heat increase, resulting in a fire.

Keep the TV at least 10cm away from the

Do not place any heat sources such as

radiators and heat registers, etc. near the TV.

wall for ventilation.

- It may cause a fire.

- Fire may be caused due to the rise of inner

 

temperature.

 

 

Do not place toys and cookies, etc. on the TV,

 

which may attract children’s attention.

 

- If it falls over on children, it may cause serious

 

injury.

Do not allow children to climb or play on the TV.

-If it falls over on children, it may cause serious injury.

When cleaning the TV, make sure to disconnect the power plug and use a dry, soft cloth for a cleanup.

-Please avoid using chemicals such as wax, benzene, alcohol, thinner, mosquito spray, air freshener, lubricant or synthetic detergent.

Unplug when you do not use your TV for a long time.

-If dust is stacked on the TV, electric shock or fire may be caused from heat, fire, or

deterioration of insulation.

When moving the TV, two or more people are advised to carry it.

- Injury or damage may be caused when the TV falls.

Never touch the power plug or outlet with wet hands.

- This may cause electric shock.

7

HYUNDAI LCD TV

Unplug the product during lightning or thunderstorms and never touch the antenna cable.

- It may cause a fire or an electric shock.

 

Keep the remote control batteries out of

Do not install the product on the floor.

sight and out reach of children.

- If it falls over, your child may be injured.

- If your child swallows a battery, see your

 

doctor immediately.

When replacing batteries, make sure to match the batteries to the (+) and (-) marks in the battery compartment.

-Mismatching of polarities may result in internal damage to batteries, fire due to leakage or contamination.

In the event of damaging or dropping the product, switch off the power and remove the plug.

- Using a damaged product may cause an electric shock or a fire.

- Contact your local service center.

Always use the standard batteries and avoid using old batteries together with new ones.

- Otherwise it may result in internal damage to batteries, fire due to leakage or contamination.

Before moving the product, ensure to switch off the power and unplug all the electrical cords and the external connection cords such as an antenna cable and other source connections, etc.

-An electrical cord(s) may be damaged, resulting in a fire or an electrical shock.

Consult a service center or customer service for inside cleaning about once a year.

- When dust is piled inside the TV for long time, fire or malfunction may be caused.

Ensure the power cord doesn’t trail across any hot objects like a heater.

- This may cause a fire or an electric shock.

INFORMATION GENERAL

8

GENERAL INFORMATION

Contents of the Package

hen opening the package, please ensure to check the following accessories provided.

Antenna Cable

Power Cord

(coaxial cable)

 

Remote Control & 2 batteries

User's Guide

(1.5V AAA)

 

Products Sold Separately

If you want to purchase separately sold products, consult a service center, electronics shops, or parts seller.

Hdmi cable

S-video Cable

 

Wall Mounting Support

Component Cable

Composite Cable

(Y, Pb, Pr)

(Video/Audio)

Audio Cable (DVD)

Audio Cable (PC)

PC signal Cable (D-SUB)

9

HYUNDAI LCD TV

Parts Names and Functions

Front View - E260D/E320D/E370D

* This product image may be a bit different from the actual product.

Speaker

Remote sensor and power LED.

-Point the remote control toward here.

-It displays standby or operation status.

-Power Indicator Status -

Indicator

Status

Red

Standby

Green

Power on

 

 

Power button

Use this button to turn on or off the TV.

Source button

Use this button to switch among inputs connected to the TV.

Menu button

Use this button to display or exit from menus.

Select button

Use this button to select each item of menu.

Channel buttons

Use these buttons to change channels. These buttons also serve as the cursor of Down and Up buttons when in Menu mode.

Volume buttons

Use these buttons for your desired sound level. These buttons also serve as the cursor of Select/Adjust when in Menu mode.

Power switch - For E370D Model Only

Use this switch to turn on/off power.

INFORMATION GENERAL

10

GENERAL INFORMATION

Rear View - E260D/E320D/E370D

* This product image may be a bit different from the actual product.

Power Switch - For E260D/E320D Only use this switch to tum on/off power

Power(AC) Input terminal Connect the power cord to this

terminal.

RS-232 input terminal

Connect to the RS-232 terminal of a PC to check its service.

S/PDIF optical digital audio output terminal

Video output terminal

Audio output terminal HDMi input terminal

D-SUB input terminal

D-SUB Audio input terminal

Component 1 Video input terminal

Component 1 Audio input terminal

Component 2 Video input terminal

Component 2 Audio input terminal

Video input terminal

S-Video input terminal

S-Video/Video Audio input terminal

Antenna (Analog/DTV) input terminal

Handle - For E260D Only

11

HYUNDAI LCD TV

Front View - E261D/E321D/E371D

* This product image may be a bit different from the actual product.

Speaker

Remote sensor and power LED.

-Point the remote control toward here.

-It displays standby or operation status.

-Power Indicator Status -

Indicator

Status

Red

Standby

Green

Power on

 

 

Power button

Use this button to turn on or off the TV.

Source button

Use this button to switch among inputs connected to the TV.

Menu button

Use this button to display or exit from menus.

Select button

Use this button to select each item of menu.

Channel buttons

Use these buttons to change channels. These buttons also serve as the cursor of Down and Up buttons when in Menu mode.

Volume buttons

Use these buttons for your desired sound level. These buttons also serve as the cursor of Select/Adjust when in Menu mode.

Power switch - For E371D Model Only

Use this switch to turn on/off power.

INFORMATION GENERAL

12

GENERAL INFORMATION

Rear View - E261D/E321D/E371D

* This product image may be a bit different from the actual product.

Power Switch - For E261D/E321D Only use this switch to tum on/off power

Power(AC) Input terminal Connect the power cord to this

terminal.

RS-232 input terminal

Connect to the RS-232 terminal of a PC to check its service.

S/PDIF optical digital audio output terminal

Video output terminal

Audio output terminal

HDMi input terminal

D-SUB input terminal

D-SUB Audio input terminal

Component 1 Video input terminal

Component 1 Audio input terminal

Component 2 Video input terminal

Component 2 Audio input terminal

Video input terminal

S-Video input terminal

S-Video/Video Audio input terminal

Antenna (Analog/DTV) input terminal

Handle - For E261D Only

13

HYUNDAI LCD TV

Remote Control

1. POWER/STANDBY

2. POWER LED

3. MUTE

4. ASPECT

5. CAPTION

6. ADD/ERASE

Use this button to add or erase channels.

7. INFOMATION

Use this button to display resolution or various program

8. PICTURE

9. SOUND

10. SRS

Use this button to select 3D surround sound.

11. SAP

Use this button to listen in a foreign language

12. EXIT

Use this button to end the OSD

13. MENU SELECTION

Use this button to select menu item

14. LEFT/RIGHT MOVE/ADJUST

Use these buttons to move between menu items or to adjust each item.

15. SOURCE

Use this button to select External input

(Option) 16. EPG

Use this button to see digital broadcast information

17. MENU

Use this button to call the OSD to the screen.

(Option)

18. NUMERIC KEYS

19. SERVICE

return to factory setting

20. FAVORITE

use this button when watching your favorite channel.

INFORMATION GENERAL

14

GENERAL INFORMATION

21.SLEEP

22.FREEZE

-Option - 23. TILT 24. PIP

-ON/OFF

:Use this button for PIP on/off

-Source

:Use this button to select the source of sub-picture.

-SIZE

:Use this button to select the size of sub-picture.

-POSITION

:Use this button to select the position of sub-picture.

-SWAP

:Use this button to swap main and sub-picture.

How to Insert Batteries in Remote Control

Press and hold part and push

Insert batteries with proper

Use the remote control with cover

to open cover.

polarities of +and -.

closed.

* Battery type :1.5V/AAA

 

 

15

HYUNDAI LCD TV

How to Watch Both Analog and Digital Broadcasts with a Single Antenna

You can watch both analog and digital broadcasts by connecting a single antenna.

Connection Method

Make sure that the antenna cable is connected to ANT (ATV/DTV).

-Antenna or Cable service without a cable box connections

-For optimum picture quality, adjust antenna direction if need,

-When inserting a 75 ohm coaxial cable into the input connection, ensure the wire tip not to bend.

-If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.

Ex.) When you want to watch Digital channel, press Number, -/DRF buttons.

CONNECTIONS

16

CONNECTIONS

Before Connecting the Video/Audio Connections to External Devices...

Please make sure to read the following information on connection to enjoy best picture quality.

Video/Audio connectors

Types of video/audio cable :

HDMI 15-Pin D-Sub COMPONENT S-VIDEO COMPOSITE

Best picture quality is displayed in the following order.

The superior picture quality starts from the far left side.

ensure to read the connecting device’s manual. The location or the number may be different depending on its model.

output of DVD, cable receiver or satellite receiver. Connecting a HDMI message, “Unknown Signal”.

connections are made. If power is given before connections completed, this

with the terminal. to be connected.

17

HYUNDAI LCD TV

How to Connect a VCR/Cable Receiver

Connection Method

1

Connect the Video cable or S-Video cable between Video/S-Video output terminal of VCR or Cable receiver and

Video/S-Video input terminal of TV. (Connect the jacks to terminals in the same color.)

2

Connect the Audio cable (Left: white, Right: red) between Audio output terminal of VCR or cable receiver and

Audio input terminal of TV. (Connect the jacks to terminals in the same color.)

Video/Cable receiver

S-Video Cable

Video cable

Audio cable

CONNECTIONS

How to Watch

1 Turn on TV and press on remote control until showing AV1(CVBS) or AV1(S-Video) banner on the botton side.

For more information, read the user’s guide of VCR or cable receiver.

To enjoy better picture quality, use the S-Video cable rather than the composite cable.

18

CONNECTIONS

How to Connect a SET-TOP BOX or DVD Player

Connection Method

1 Connect the Video cable (Y, Pb, Pr) between output terminals (Y, Pb, Pr) of DTV receiver or DVD player and the

2

DTV receiver / DVD Player

Video (Y, Pb, Pr) cable

Audio cable

1

-Output terminal mark (Y, Pb, and Pr) of DVD player may be indicated as Y, B-Y, R-Y/Y-Cb-Cr /Y-Pb-Pr according to the type of DVD player models.

-If your DVD player or Set Top Box supports HDMI /D-SUB, see Connecting to a PC (page 19) for connection. You can enjoy more clear picture quality.

19

HYUNDAI LCD TV

How to Connect a Camcorder/Game Player

Connection Method

1

Connect the Video/S-Video cable between Video/S-Video output terminal of Camcorder/Game player and

Video/S-Video input terminal of TV. (Connect cables and terminal in the same colors.)

 

 

2

Connect the Audio cable (Left-white, Right-red) between Audio output terminal of Camcorder/Game player

and Audio input terminal of TV. (Connect the jacks to terminals in the same color.)

 

 

 

 

 

 

 

 

 

 

 

 

 

Camcorder

 

Game Player

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-Video Cable

 

 

Audio cable

 

 

Video cable

How to Watch

 

1

Turn on TV and press

on remote control until showing AV1(CVBS)

or AV1(S-Video) banner on the bottom side.

For more information, read the user’s guide of Game player or Camcorder.

CONNECTIONS

20

CONNECTIONS

How to Connect to a PC

Connection Method

1

TV.Connect the PC signal cable (15-pin D-sub) between the output terminal of PC and the D-sub input terminal of

2

Connect the Audio cable between Audio output terminal of PC and Audio input terminal for PC on the rear of

TV. (Connect the jacks to terminals in the same color.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio Cable

 

 

or

 

 

 

 

 

 

 

 

D-SUB cable

When Using as a PC Monitor

1 Turn on TV and press

on remote control until showing HDMI

or VGA banner on the bottom side.

-If you use the HDMI connection, you can enjoy better picture quality.

-This product supports Plug-and-Play function.

-We recommend the above method if the DVD player or set top box supports DTV signal with HDMI/D-Sub (15 pin) cable for the better picture quality.

-If you input an unsupported resolution in PC or HDMI mode, the screen won’t be displayed properly.

21

 

 

 

HYUNDAI LCD TV

 

 

 

 

 

 

 

 

Resolutions Supported in PC

 

 

 

 

 

 

 

 

 

 

Resolution

Horizontal frequency

Vertical frequency

 

 

 

 

 

 

 

 

 

 

31.47

59.94

 

 

 

640 x 480

 

 

 

 

 

37.50

75.00

 

CONNECTIONS

 

 

 

 

 

 

 

 

 

720 x 400

31.47

70.08

 

 

 

 

 

 

 

 

 

 

 

 

37.88

60.32

 

 

 

800 x 600

 

 

 

 

 

46.88

75.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

48.36

60.00

 

 

 

1024 x 768

 

 

 

 

 

56.50

70.10

 

 

 

 

 

 

 

 

 

 

60.02

75.03

 

 

 

 

 

 

 

 

22

CONNECTIONS

HDMI Connection

HDMI *1 (High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supportsuncompressed standard. The HDMI terminal supports both video and audio information.To the HDMI*1 input terminal, you can connect an EIA/CEA-861/861B*2 compliant consumer electronic device, such asa Set Top Box or DVD player with HDMI or DVI output terminal.Input a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to this HDMI terminal, so youcan display the high-definition pictures on this TV in the digital form.

HDMI

DVD Player

Set Top Box

If the external device has DVI output only, use a DVI to HDMI adapter *3 cable to connect to the HDMI terminal.

HDMI Cable

Compatible VIDEO Signal

Resolution

No. of dots(HXV)

Vertical scanning frequency(Hz)

 

 

 

1080i

1920 X 1080i

59.94/60

 

 

 

 

720 X 480p

59.94/60

480p

 

 

640 X 480p

59.94/60

 

 

 

 

720p

1280 X 720p

59.94/60

 

 

 

 

 

 

This input terminal is not intended for use with computers.

23

HYUNDAI LCD TV

Compatible sampling freguency of AUDIO signal through HDMI (L.PCM) : 48kHz / 44.1kHz / 32 kHz

Notes:

 

• This HDMI connector is Type A.

 

• If you connect an equipment without a digital output terminal, connect to the COMPONENT VIDEO, S VIDEO or

 

VIDEO input terminal on the TV so you can enjoy an analog signal.

CONNECTIONS

• The DIGITAL IN terminal can only be used with 1080i, 480i or 480p picture signals. Set the Digital Set -Top -

 

Box DIGITAL OUT terminal Output setting to 1080i, 480i or 480p. For detailed information, refer to the Digital

 

Set -Top -Box instruction manual. If you cannot display the picture because your Digital Set -Top -Box does

 

not have a DIGITAL OUT terminal Output setting, use the component Video Input (or the S Video Input or

 

Video Input). In this case the picture will be displayed as an analog signal.

 

How to Watch

1 Turn on TV and Press on remote control until showing HDMI banner on the bottom side.

-*1 HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMILicensing LLC.

-*2 EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video includinghigh bandwidth digital content protection.

24

CONNECTIONS

How to Connect an External Visual Device

You can connect your TV to other visual device to watch TV program at the same time.

Connection Method

1

Connect the Composite Video cable between Video input terminals of an external device and the Video output

terminals for Video on the rear of TV.

 

(Connect the jacks to terminals in the same color.)

2

Connect the Audio cable between Audio input terminal (Left-white, Right-red) of an external device and Audio

output terminal for Video on the rear of TV. (Connect the jacks and terminals in the same color.)

3

For more information, read the user’s guide of an external device.

External Visual Device

Video Cable

Video and Audio outputs are available only when watching an Analog TV, Digital TV or VCR. This is not supported in the Input Mode of Component, HDMI /D-SUB or S-Video.

25

HYUNDAI LCD TV

How to Use Digital Sound

Connection Method

1

Connect the coaxial cable to the digital audio output terminal for coaxial cable or SPDIF optical digital audio

 

output terminal on the rear of TV.

2

Select Digital Sound Output. (See page 40~41)

3

For more information, read the user’s guide of the external sound device.

CONNECTIONS

Amplifier with Built-in Dolby Digital AC3

Coaxial cable

26

CHANNEL

How to Select TUNER MODE

You can choose the RF-input between off-air and cable.

1

2

3

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press up or down button to move to “channel” Press or buttons to select “channel”

Press up or down button to move to Tuner Mode Press or

Press up or down button to move to Air / Cable and Press to select item you want.

Press MENU button after the setting is done, and Menu goes the previous menu.

If the EXIT button is pressed, the menu will disappear.

27

HYUNDAI LCD TV

How to Store Channels Automatically

-Your TV can memorize and store all of the available analog/digital broadcast signals for both “off-air” (antenna) and cable channels.

-Before your television can begin memorizing the available channels, make sure to specify the type of the signal source (antenna or cable) connected to your TV.

1

2

3

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to “channel”. Press or

Press Up or Down button to move to “AUTO SCAN”. Press or button to select “AUTO SCAN”.

Press button and Auto Scan is Activated

CHANNEL

-In the middle of AUTO SCAN, if you press button once, AUTO SCAN is interrupted. Press the Menu button to exit. Then the original channel is returned.

-If you have changed the connection of an antenna or cable, perform AUTO SCAN again.

28

CHANNEL

How to Add/Erase Channels Manually

Users can add or erase the desired channels.

1

2

3

4

OK

OK

Press channel buttons or the number buttons

on remote control to view the channels that will be added or erased.

- To Add Channel

Add the channel by pressing the ADD/ERASE button.

- To Delete Channel

Press the ADD/ERASE button to erase the channel Press Left and Right buttons to set YES/NO .

Press button to set.

Channel Added

Channel Deleted

29

HYUNDAI LCD TV

How to Set Channel Edit and Favorite Channels

Users can store frequently watched channels to quickly access a preferred channel.

1

2

3

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to “channel”. Press button or “channel”.

Press Up or Down button to move to “channel edit”. Press button or to select “channel edit”.

Press

button to

.

You can channel and

-channels by pressing

add/erase, Up/Down,

and

buttons.

Press MENU or exit button after the setting is done, and you can save the channels select.

CHANNEL

The Favorite function is available only with remote control.

30

CHANNEL

How to See Signal Strength

The function is only for DTV channel.

1

2

OK

OK

Press menu button.

menu items appear on the screen.

Press Up or Down button to move to “channel” .

Press or

Press Up or Down

to move to “signal strength”.

 

Press

or

button to select “signal strength”

 

then the signal strength of anntena appears

 

on the screen.

 

 

Press Menu button after the setting is done.

 

menu goes to

menu

 

If the Exit button

pressed, the menu will disappear.

 

31

HYUNDAI LCD TV

How to Set The Input Mode

1

2

3

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to “channel”.

Press

or

select “channel”.

Press Up or

button to move to “external input” .

Press

or

button to select “external input”.

Press left or right button to set input mode

Whenever press left/right button to set input mode

Changes in following order.

TV(Air/Cable) AV1(CVBS) AV1(S-Video)

YPbPr1 HDMI VGA

Press Menu button after the setting is done, and Menu goes to the previous Menu. If the Exit button is prested, the menu will disappear.

You can set

mode quickly using the remote control press the

button

Whenever press this button, the input mode changes if following order

TV(Air/Cable) AV1(CVBS) AV1(S-Video) YPbPr1 YPbPr2 HDMI VGA

CHANNEL

32

PICTURE

How to Select the Picture Mode

Users can automatically adjust the picture mode according to the input mode.

1

2

3

OK

OK

OK

Press Menu button.

Menu items appear on the

Press Up or Down button to move

Press or button to

Press Up or Down button to move to picture mode Press or

Whenever you

Up or Down button, the mode

changes in following order.

Custom

Mild Vivid

Press MENU button after the setting is done, and Menu goes the previous menu.

If the EXIT button is pressed, the menu will

CUSTOM : When

user wants to directly set the

STANDARD : Most video contents are appropriate to

MILD : Soft display.

VIVIDI: Clear and Vivid display

How to Directly Select Picture Mode

Press Pricture button.

- Whenever press this button the mode changes in following arder. Custom Standard Mild VIVID.

- The adjustment of Contrast,

Sharpness, Saturation and Tint is allowed only in the Custom mode.

33

HYUNDAI LCD TV

How to Set the Desired Picture

Users can manually adjust their desired picture.

1

2

3

4

5

OK

OK

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to picture.

Press or button to select picture.

Press Up or Down button to move to picture mode

Press button or to select picture mode

Press Up or Down buttom to move to custom and

Press button to make a selection

Press Up or Down buttom to move to Brightness .

Press or button to select Brightness .

Press Left or Right button to adjust.

Press MENU button after the setting is done, and Menu goes to the previous menu.

If the EXIT button is pressed, the menu disappears.

BRIGHTNESS : Adjust the brightness of the entire picture.

SATURATION : Adjust colors into deeper or lighter colors.

CONTRAST : Adjust the brightness and darkness of object and background. SHARPNESS : Adjust clarity of outline of objects.

TINT : Adjust colors naturally.

COLOR TEMP : Whenever You Press left or right button, the mode changes in following order NORMAL WARM COOL

DNR : Reuce the Digital Noise in the DTV mode.

SHARPNESS,TINT are not applied to PC and HDMI modes.

PICTURE

34

PICTURE

How to Select the Aspect Ratio

Users can manually adjust size of the screen.

Press Aspect button.

Menu items appear on the screen.

Whenever you press Aspect button, the mode changes in following order. WIDE NORMAL ZOOM

AUTO (This is applied in digital broadcasting input mode only.)

The screen size automaticaly changes according to a signal source received (General broadcast 4:3, Wide broadcast 16:9)

General broadcast picture is adjusted to 16:9.

Normal

ZOOM

35

HYUNDAI LCD TV

How to Select the Audio Mode

Users can adjust sound mode automatically as they want.

1

2

3

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to sound .

Press or button to select sound .

Press Up or Down button to move to sound mode button to select sound mode.

Mode is

Whenever you press Up or Down button, the mode changes in following order.

CUSTOM STANDARD MOVIES MUSIC SPEECH

Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear.

CUSOTM : When the user wants to set the value. See the next page STANDARD : General sound mode. This fits most audio contents.

MOVIES : For enjoying vivid sound.

SPEECH : For enjoying clear sound.

MUSIC : For enjoying original sound.

SOUND

36

SOUND

How to Adjust

Desired Audio Mode

Users can adjust sound mode manually

want.

2

3

4

5

OK

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to sound. button to move to sound.

Press Up or Down button to move to sound mode Press or to select.

Press Up or Down button to move to custom. and press button to make a selection.

Press Up or Down to select items. (Table, Boss and blance)

Press or button to select items

Move between the items listed using UP or Down button. Adjust the level of the item selected using

Left or Right button.

Press MENU button after the setting is done, and Menu goes to the previous menu.

If the EXIT button is pressed, the menu disappears.

TREBLE: Adjusts the range size of high sound.

BASS: Adjusts the range size of low sound.

BALANCE : Adjusts the balance of left and right speakers.

37

HYUNDAI LCD TV

How to Use the Automatic Volume Control

With this Automatic Volume Level Control, everything you watch will always maintain the volume level that you decide. Basically it is set to “off”

1

2

3

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to sound .

 

 

button to select sound .

Press Up or

button to move to AVL.

Press

or

button to select AVL.

Press

or

button to set to on/off.

Press

 

to set to on/off.

Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear.

SOUND

38

How to Listen to SRS TruSurround XT (Surround)

Users can enjoy spectacular 3D sound.

1

2

3

SOUND

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to sound. Press or button to select sound.

Press Up or Down button to move to SRS. Press or

Press Left and

buttons to set to

trademark of SRS Labs, Inc.

TruSurround XT technology is incorporated under license from SRS Labs, Inc.

The SRS TruSurround XT function is activated only when the audio input signal is Stereo.

39

HYUNDAI LCD TV

How to Set Audio Language

While watching a digital program, you can listen to foreign language if the program is supported with foreign language.

1

2

3

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to sound .

Press

or

 

sound .

Press Up or Down

to move to

AUDIO LANGUAGE .

Press

or

to select

AUDIO LANGUAGE .

Whenever you

Left or Right button,

the mode shifts

following order.

ENGLISH

SPANISH

Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear.

SOUND

How to Directly Select Audio Language : Press the button.

- Whenever you press this button,

shifts MONO STEREO SAP in order when receiving analog

signals.

 

You can select one of the languages

you prefer when receiving digital signals.

- If you want to see language

while watching a digital channel, press the

button to display

language information that is

received.

 

40

SOUND

How to Set the Digital Audio Output

The digital audio output terminal allows you to enjoy digital sound. (For more details, see page 24)

1

2

3

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to sound . Press or button to select sound.

Press Up or Down button to move to “DIGITAL AUDIO OUT” Press or buttons to select Digital Audio out.

Whenever you press Left or Right button, the mode shifts in following order.

Dolby PCM

Press MENU button after the setting is done, and Menu goes to the previous menu.

If the EXIT button is pressed, the menu will disappear.

Manufactured under license from Dolby Laboratories.

“Dolby Digital” and the double-D symbol are trademarks of Dolby Laboratories.

41

HYUNDAI LCD TV

How to Set Auto Lock

This function is used to prevent from using the control buttons on the front top of the TV or from connecting external devices to the TV. You make sure to set a PIN number to use this function.

1 OK

2 OK

3

4 OK

5 OK

6 OK

7 OK

Press Menu button.

Menu items appear on the

Press Up or Down button to

Press or button to

Press Up or Down buttons to move to “AUTO LOCK”. Press or button to select “AUTO LOCK”.

Then the Enter PIN number window appears. The default is 4 digits (0-0-0-0).

- To set Blocking :

Press Up or Down button to move to “SET BLOCKING”. Press or button to select “SET BLOCKING”

Press Up or Down button to move to ON/OFF . Press button to make a selection.

- To set Channel blocking :

Press Up or Down button to move to “CHANNEL BLOCKING”.

Press button to select “CHANNEL BLOCKING”.

Then the AUX BLOCK items appear. Press Up or Down button to move to the item you want.

Press button to set to LOCK/UNLOCK . If the item is set to ON, such item is disabled.

Continued on next page ......

FUNCTION

42

Continued from previous page..... (Set the Lock External Signal function.)

8 OK

9

10

- To update DTV rating :

Press Up or Down button to move to “DTV Rating”. Press button to select “DTV Rating”.

Press MENU button after the setting is done, and Menu goes to the previous menu.

If the EXIT button is pressed, the menu will disappear.

FUNCTION

- If you forgot your PIN number, Enter a 4-digit number (2-5-0-1) inthe pin number window.

43

HYUNDAI LCD TV

How To Set Block By Rating

This(V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station.

The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked.

V-Chip rating and categories

Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to- video movies use the Movie Rating System (MPAA) only.

Ratings for Movies previously shown in theaters :

Movie Ratings :

- Blocking Off

(Permits all programs)

 

- G

(General audience)

 

- PG

(Parental guidance suggested)

 

- PG-13

(Parents strongly cautioned)

 

- R

(Restricted)

 

- NC-17

(No one 17 and under admitted)

 

- X

(Adult only)

If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.

- TV-G

(General audience)

- TV-PG

(Parental guidance suggested)

- TV-14

(Parents strongly cautioned)

- TV-MA

(Mature audience only)

- TV-Y

(All children)

- TV-Y7

(Children 7 years older)

TV Rating Children : - Age

(applies to TV-Y, TV-Y7)

- Fantasy Violence

(applies to TV-Y7)

TV Rating General : - Age

(applies to TV-G, TV-PG, TV-14, TV-MA)

-

Dialogue-sexual dialogue

(applies to TV-PG, TV-14)

- U Language-adult language (applies to TV-PG, TV-14, TV-MA)

-

Sex-sexual situations

(applies to TV-PG, TV-14, TV-MA)

-

Violence

(applies to TV-PG, TV-14, TV-MA)

FUNCTION

44

FUNCTION

...... Continued from previous page.

1

2

3

4

5

OK

OK

OK

OK

Press Menu button.

Menu items appear on the

Press Up or Down button

Press or button

The message “Enter PIN”

Enter your 4-digit PIN

Press Up or Down button to move to “BLOCK BY RATING” and press buttons to make a selection.

The new screen will appear.

Press Up/Down and left/right buttons to

select the items (MPAA and TV Parental midelines)

Press up/down and left/right buttons to select the item

Press button to make a selection.

Press MENU button after the setting is done, and Menu goes to the previous menu.

If the EXIT button is pressed, the menu will disappear.

45

HYUNDAI LCD TV

How to View Closed Captions

Choices in the closed caption menu are : CC Mode, Priority (Analog caption or Digital caption), and Option.

1. CC MODE :

ON : Captioning information is always shown, when available.

OFF : No captioning information is displayed.

2. PRIORITY :

You can choose whether the TV uses digital or analog captions for digital TV programs that have both or either.

- ANALOG (CAPTION) : You can select a closed caption mode, which is the mode, or source, used for displaying captioning information for analog channels or digital channels, if available.

• CAPTION :

The form for the words that scroll across the bottom of the TV screen : usually the audio portion of the program provided for the hearing impaired.

CC 1 : For video related information that can be displayed. Script can be in any language.

CC 2/3/4 : Other modes used for video related information.

• TEXT :

The term for the words that appear in a large black frame and almost cover the entire screen : Usually message provided by the broad caster.

T 1 : Blanks out a large portion of the picture on the television screen, and display program guide or any other information currently being transmitted.

T 2/3/4 : other modes that display information and blank out a large portion of the picture of the TV screen.

FUNCTION

46

...... Continued from previous page.

3. OPTION :

Customized closed captioning for the digital caption by choosing the settings for the following options :

1)cc Background

COLOR : Set the color of the cc Background AUTO -> BLACK -> WHITE -> RED -> GREEN -> BLUE -> YELLOW

-> MARGENTA -> CYAN

OPACIFY : Specify the opacity for the - AUTO -> SOLED -> FIASHUNG -> TRANSLUCENT -> TRANSPARE

2) Caption Text

FUNCTION

1

2

3

4

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to function

 

to select function.

Press Up and

buttons to move to

“CAPTION” and

or

button

to make a

 

 

Display MODE is highlighted.

Press Left and buttons to select “OFF” or ALWAYS ON”.

Sub menu item are activated.

Press Up or Down button to move the item. Press Left or Right button to select the item.

47

5

6

7

8

OK

OK

HYUNDAI LCD TV

CC Background and caption text, press button.

Press Up or Down button to move between the items (cc Background and Caption text)

Press left/right buttons to select the item

Then you can choose the CC Background and caption text by pressing up/down and left/Right buttons.

Press MENU button after the setting is done, and Menu goes to the previous menu.

If the EXIT button is pressed, the menu will disappear.

FUNCTION

48

How to Set the EPG View

- This service is only for DTV Model.

1

2

3

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to function. Press or

Press Up or Down button to move to EPG View Press or button to select EPG View

Press

or

button to see the EPG

Then you can

information on the broadcastion

time and program.

Press MENU button after the setting is done, and Menu goes the previous menu.

If the EXIT button is pressed, the menu will disappear.

FUNCTION

49

HYUNDAI LCD TV

How to Set Date / Time

-Yes can automatocally turn on or off the TV at a present time, To do this, you must set the time it you wish to use the automatic on or off timers

1

2

3

4

5

6

7

8

OK

OK

OK

OK

OK

OK

OK

OK

Press Menu button.

Menu item appear on the screen.

Press Up or Down button to move to setup Press or

Press Up or

 

to move to “DATE/TIME”

Press

or

button to select “DATE/TIME”

Press Up or

 

to move to manual manually.

Press

 

to set the current “DATE/TIME”

Press Up/Down

Left/Right buttons to set

year, month,

 

Minute and AM/PM

After setting,

 

 

 

Press

or

button to exit

 

“AUTO” is only

DTV mode.

 

If you select “AUTO”,

 

Press

or

button to select function

Press Up/Down

left/right buttons to timezone

Whenever you

 

the buttons, timezone

is changed in

 

order

 

Pacific

Mountain

Central

Eastern

Alaska

Hawaii

Atalantic

 

Press Up or

 

to move to “DAYLIGHT SAVING”

Press

or

button to select “DAYLIGHT SAVING”

Press Up or Down button to select observe/Do

Press or button to make a selection.

Press MENU button after the setting is done, and Menu goes the previous menu.

If the EXIT button is pressed, the menu will disappear.

SETUP

50

SETUP

How to Set Power on Time

1

2

3

4

5

OK

OK

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to setup.

Press

or

to select setup.

Press Up/Down

to select power on time

Press

or

button to select power on time.

Press

button to activate power on time

whenever you

left and right button,

the mode shifts

following order

OFF

DAILY

ONCE

If you select once or daliy in the “ACTIVATE”

You can set

and channel

Press up/down

to select Time

Press

button to set Time

Press Left or Right button to move between Hour, minute and AM/PM and Press up or down buttons to set Hour, minute and AM/PM

Press Up/Down

to select channel

Press

button to set channel.

Press numeric

to set channel number

Press

button to set.

Press menu button after the setting is done, and Menu goes the previous menu.

If the EXIT button is pressed, the menu will disappear.

51

HYUNDAI LCD TV

How to Set Power Off Time

1

2

3

4

OK

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to setup Press or

Press Up/Down

to move to power off time

Press

or

button to select power off time.

Press button to activate power off time whenever you left and right button, the mode shift in following order

OFF DAILY ONCE

If you select once or daliy in the “ACTIVATE” You can set

Press Up/Down

to select time

Press

button to set time.

Press Left or Right button to move between Hour, minute and AM/PM

Press Up or Down buttons to set Hour, minute and AM/PM. Press button to set

Press MENU button after the setting is done, and Menu goes the previous menu.

If the EXIT button is pressed, the menu will disappear.

SETUP

52

How to Set Sleep Time

1 OK

2 OK

3 OK

4 OK

SETUP

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to setup Press or

Press Up or Down button to move to sleep time Press or button to set sleep time.

Press up or down button to set sleep time whenever you press up or down button the mode shifts in following order

OFF 15 MINUTES 30 MINUTES 60 MINUTES 90 MINUTES 120 MINUTES

Press button to set.

Press MENU button after the setting is done, and Menu goes the previous menu.

If the EXIT button is pressed, the menu will disappear

How to Directly Set the sleep timer : Press the

button.

- Whenever press this button, the mode shifts off 15 30 60

53

HYUNDAI LCD TV

How to Choose Menu Language

Users can select their language preference in order to display main menus and sub menus, etc.

1

2

3

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to setup.

Press or

Press up/down

to move to menu language.

Press

or

button to select menu language.

Press

or

to set language

Whenever you press Left or Right button,

the mode shifts

following order.

ENGLISH

ESPAÑOL

Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear.

SETUP

54

How to Set Menu Opacify

Users can select their language preference in order to display main menus and sub menus, etc.

1

2

3

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to setup . Press or

Press Up or Down button to move to move to menu opacify

Press or button to select menu opacifty

Press left or

to set menu opacify you want.

Press MENU button after the setting is done, and Menu goes to the previous menu.

If the EXIT button is pressed, the menu will disappear.

SETUP

55

HYUNDAI LCD TV

How to Set Emergency Alert

1

2

3

OK

OK

OK

Press Menu button.

Menu items appear on the screen.

Press Up or Down button to move to setup . Press or

Press Up or Down button to move to Energency Alert.

Press

or

button to select Energency Alert.

Press Up or Down button to move to Low/medium Press left or right button to select present/discard.

Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear.

SETUP

56

How to Set the Geometry in PC Mode

This function is only available in PC mode.

1 OK

2 OK

3 OK

4 OK

5 OK

SETUP

Press Menu button.

Menu item appear on the screen.

Press Up or Down button to move to setup.

Press or

Press Up or Down buttons to move to “PC”.

Press or button to select “PC”.

Press Up or Down button to move to position.

Press or button to select position.

Press Up and Down buttons to adjust V-position .

Press or to adjust H-position.

After setting press button to exit

Press Up and Down buttons to move to “RESET” .

Press or to adjust H/V-position auto .

Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear.

H. POSITION : the horizontal position of the picture.

V. POSITION : the vertical position of the picture.

If the display input signal (resolution) has been changed, the picture will be automatically optimized.

57

HYUNDAI LCD TV

Glossary 1

Component video

Component video is sent through three cables: two color shade (chrominance) signals

 

and one brightness (luminance) signal. Component video achieves greater color

 

accuracy than composite video or S-VIDEO by splitting chrominance into two separate

 

portions.

Composite video

Composite video is sent through a single cable. Composite video combines the color

 

shade (chrominance) and brightness (luminance) information into one video signal.

S-VIDEO

S-VIDEO requires a single cable, which carries the brightness (luminance) and color

 

(chrominance) signals of the picture separately. S-VIDEO provides better resolution

 

than composite video, which carries the signals together.

480i

Provides 480 lines of resolution. Displays images using interlaced scanning, which first

 

transmits all the odd lines on the TV screen and then the even lines.

480p

Provides 480 lines of resolution. Displays images using progressive scanning, which

 

transmits each line from top to bottom.

720p

Provides 720 lines of resolution. Displays images using progressive scanning, which

 

transmits each line from top to bottom.

1080i

Provides 1080 lines of resolution. Displays images using interlaced scanning, which

 

first transmits all the odd lines on the TV screen and then the even lines. 1080i is one

 

of the formats used by HDTV (High Definition TV).

Digital television (DTV)

A new technology for transmitting and receiving broadcast television signals. DTV

 

provides higher resolution and improved sound quality over analog television.

HDTV(High Definition TV)

HDTV is a new kind of digital TV, creating a high quality picture, high definition. The

 

HDTV provides a theater-like screen with an aspect ratio of 16:9. Supports 720p or

 

higher.

SDTV(Standard Definition TV)

SDTV is a new kind of standard definition digital TV, having a range of lower resolution

 

than the HDTV. Supports 480i.

Cable Broadcast Receiver

A device that receives cable broadcasting. Connecting it to your TV set allows you to

(Converter)

watch a various channels.

Satellite Broadcasting

Provides crisp picture and clear audio quality throughout the country via a satellite.

VHF/UHF

VHF (Very High Frequency) is the part of the frequency spectrum from 30 to 300

 

megahertz. UHF (Ultra High Frequency) is the part of the frequency spectrum from 300

 

to 3,000 megahertz.

APPENDIX

58

APPENDIX

Glossary 2

DVD DVD (Digital Versatile Disc) is an optical disc that can store a huge volume of multimedia such as video, game, and audio application, etc.

Coaxial Cable Coaxial cable is the kind of rounded copper cable, which is generally used for TV antenna.

Aspect ratio Refers to the ratio between the width and height of the screen. This TV has a 16:9 (widescreen) aspect ratio, as opposed to a 4:3 aspect ratio.

Picture Mode Picture Mode features the optimal picture quality. There are Standard-Dynamic-Movie- MildCustom features in order. “CUSTOM” allows you to adjust Contrast, Brightness, Sharpness, Color and Tint.

Sound Mode Sound Mode features the optimal sound quality. There are Standard-News-Music- SportsCustom features in order. “CUSTOM” allows you to adjust high frequency sound, middle frequency sound and low frequency sound.

Digital Broadcasting Video and Audio signals digitized and transmitted by broadcasting companies complying with the new digital television standard developed by the ATSC (Advanced Television System Committee). Digital Broadcasting technology provides multimedia services including a variety of additional services as well as high-definition quality picture.

Analog Broadcasting ATSC-based Video and Audio signals transmitted by broadcasting companies.

SRS TruSurround TX A well-recognized 3D sound technology developed by US SRS Labs, Inc.

This technology delivers the ultimate audio experience only with two speakers as if through multi-channel speakers.

Dolby Digital Formerly known as AC-3, Dolby Digital is a digital audio coding technique that reduces the amount of data needed to produce high quality sound.

Mono Audio signals are produced through a single channel. It is difficult to experience a spectacular sound since audio signals are reproduced with a single speaker.

Stereo Audio signals are produced through two channels. A spectacular sound is reproduced with two separated speakers.

Widescreen Term given to picture displays with a wider aspect ratio than NTSC 4:3. Digital HDTV is 16:9 widescreen. Most motion pictures also have a widescreen aspect ratio, some even wider than 16:9.

External source Refers source signals that come from other external devices such as a VCR, camcorder and DVD player, etc. than a TV set.

59

HYUNDAI LCD TV

Glossary 3

MTS A bilingual service provided when an overseas film, foreign drama or overseas news, etc. is aired. You can select one of two choices: mother tongue and foreign language. Or you can listen to both languages at the same time.

DVI Digital Visual Interface is a specification for digital signals. This interface using TMDS transmission reduces the loss of signal, allowing to enjoy a clear and crisp image.

HDMI HDMI (High-Definition Multimedia Interface) is the first and only industry-supported, uncompressed, all-digital audio/video interface.

HDMI provides an interface between any audio/video source, such as a set-top box, DVD player, or A/V receiver and an audio and/or video monitor, such as a digital television (DTV), over a single cable.

Virtual channels There is a new numbering system for DTV channels. The system, called the “DTV virtual channels,” gives a number for each DTV program service, and almost always uses the analog NTSC channel number as the first number for that station. The use of virtual channels allows stations to use the same channel number “brand” for both NTSC and DTV. The printed listing services have not yet changed their format to show only the DTV virtual channel numbering system. So in the example, the station is using RF Channel 38 for DTV and is transmitting DTV programs with virtual channel numbers 15.n. The 15.n is short hand for 15.1, and 15.2 and 15.3, etc., as there can be more than one DTV program lineup from the station. So, 15.1 is the first DTV program lineup, 15.2 is the second, 15.3 is the third. Some DTV stations may have only one virtual channel, others perhaps as many as six.

APPENDIX

60

APPENDIX

Troubleshooting

Installation Problems

 

Symptom

Possible solution

How can I install an

Refer to page 16.

antenna?

 

TV screen is not clear after

Indoors antenna may experience poor reception due to surrounding buildings. Please

installing an indoors

install an outdoors antenna or wireless antenna.

antenna.

 

How can I view cable

Please install a cable broadcasting receiver (Converter).

broadcasting?

 

Picture Problems

 

Symptom

Possible solution

Neither picture nor

Check whether power is on.

sound comes up.

Check whether the power is cut or whether power cord is properly connected.

 

Try to plug another product’s power cord to the outlet the TV is plugged into.

Picture turns on slowly

This symptom is not a malfunction. This delay is designed to prevent the distorted and

after power is on.

noisy picture when power is on. However, if the picture does not appear more than 5

 

minutes after power is on, call a service center.

Picture is distorted or frozen

This symptom may be caused by weak reception. Contact your local station or cable

while watching digital

company.

broadcasting.

 

Input Source information

Check whether your TV is properly connected to external devices.

only appears on black

 

screen.

 

Poor reception on some

Check whether you selected proper channels. Try re-orienting your antenna.

channels.

 

Black and white on some

Check other channels for black and white screen. Adjust colour.

channels.

 

TV won’t turn on.

Ensure the power cord is plugged.

Screen is too bright or too

Adjust brightness.

dark.

 

61

HYUNDAI LCD TV

Auto On does not work.

Ensure to use the remote control or power button on the product to turn off your TV. If

 

you unplug the power cord, the stand-by consumption power becomes 0 (zero), which

 

causes the programmed time to be erased.

After setting the time,

Ensure to use the remote control or power button on the product to turn off your TV. If

I turned TV off and turn it on.

you unplug the power cord, the stand-by consumption power becomes 0 (zero), which

The programmed information

causes the programmed time to be erased.

has been erased.

 

Sound Problems

 

Symptom

Possible solution

Too much noise occurs.

Check whether the audio setting is in the Stereo mode. In the Stereo mode, the sound

 

may be distorted in the area where experiences poor reception or is located far away

 

from a TV broadcasting station.

No sound while viewing a

Make sure an audio or audio/video component is securely inserted into the appropriate

cable channel

jacks. Check other channels for sound. Check the volume settings on the cable

 

broadcasting receiver.

Picture is OK but sound does

Try to press volume up/volume down buttons of your remote control.

not come out.

Try to press MUTE buttons of your remote control.

One of the speakers does not

Select sound balance and make proper adjustment. (Page 37)

produce sound.

Check the speaker connection cables.

General

 

Symptom

Possible solution

Remote control won't work.

Check whether there is a blocking object between the remote control and TV.

 

Make sure your TV is Power On. (In case of normal, LED on the front panel is in Red.)

 

Check whether batteries are inserted with proper polarities(+, -).

 

When the batteries are worn out, replace with new ones.

Where does the S-Video

Connect the two Audio jacks from the S-Video cable to the left and right ports on the

cable plug in for audio

Composite.

output?

 

Strange noises are heard.

Ticking noise during or after watching is caused by the change of ambient

 

environment such as humidity and temperature, which is characterized by plastic

 

products. Strange ticking noise occurs because a signal is suddenly transmitted to the

 

TV panel. So, this is not a malfunction.

I tried to use the TV screen

Adjust the resolution referring to the standard signal mode table. Check the

as a PC monitor

specification of your video card installed in your PC. If your video card does not work in

but it doesn’t work.

supported hardware. Try upgrading the video card’s driver.

APPENDIX

62

Care and Cleaning

Cabinet Cleaning

Wipe a soft dry cloth.

Do not use inflammables like Benzene or Thinner, or wet clothes.

Do not scratch the panel of LCD with a fingernail or pointed object.

Screen Cleaning

Clean the screen with a soft cloth moistened in mild glass detergent and dry with a soft cloth.

Never use any solvent on the screen such as Acetone, Benzene, or

Thinner, etc.

Cleaning Inside

When the inside needs to be cleaned, contact a service center or distribution agent where the item is purchased.

It is recommended cleaning is complete before the rainy season.

APPENDIX

63

HYUNDAI LCD TV

Product Specifications - E260D/E320D/E370D

Model

 

E260D

E320D

E370D

 

 

 

 

 

Input

S-Video

1EA (A/V audio common)

1EA (A/V audio common)

1EA (A/V audio common)

 

 

 

 

 

 

Video (RCA)

1EA (Audio included)

1EA (Audio included)

1EA (Audio included)

 

 

 

 

 

 

Component(Y/Cb/Cr)

2EA (Audio included)

2EA (Audio included)

2EA (Audio included)

 

 

 

 

 

 

Antenna

1EA

1EA

1EA

 

 

 

 

 

 

PC Connection jack

D-SUB

D-SUB

D-SUB

 

Max. resolution

1024 X 768 @ 75 Hz

1024 X 768 @ 75 Hz

1024 X 768 @ 75 Hz

 

Audio

L/R

L/R

L/R

 

 

 

 

 

 

HDMI-HDCP

1EA

1EA

1EA

 

 

 

 

 

 

Memory Slot

No

No

No

 

 

 

 

 

Output

Video

1EA

1EA

1EA

 

 

 

 

 

 

Audio

2EA (L/R, SPDiF)

2EA (L/R, SPDiF)

2EA (L/R, SPDiF)

 

 

 

 

 

TV/Video

Analog

NTSC M / FM

NTSC M / FM

NTSC M / FM

 

 

 

 

 

 

Digital

ATSC

ATSC

ATSC

 

 

 

 

 

 

Video system

Component, S-Video,

Component, S-Video,

Component, S-Video,

 

 

Composite, PC, HDMI

Composite, PC, HDMI

Composite, PC, HDMI

 

 

 

 

 

Power

Supply

AC 100 - 240 V, 50/60 Hz

AC 100 - 240 V, 50/60 Hz

AC 100 - 240 V, 50/60 Hz

 

 

 

 

 

 

Consumption power

Typical 130W

Typical 150W

Typical 170W

 

 

 

 

 

 

Stand-by power

Under 5W

Under 5W

Under 5W

 

 

 

 

Dimension (W x D x H mm - Stand included)

684 x 194 x 541.5

806 x 229 x 617

939 x 350 x 728

 

 

 

 

Weigh (Stand included)

12.6 Kg

17.0 Kg

26.6Kg

 

 

 

 

 

Control type

 

Remote control, Key control

Remote control, Key control

Remote control, Key control

 

 

 

 

 

- The above specifications may be subject to change without prior notice.

APPENDIX

64

Product Specifications - E261D/E321D/E371D

Model

 

E261D

E321D

E371D

Input

S-Video

1EA (A/V audio common)

1EA (A/V audio common)

1EA (A/V audio common)

 

 

 

 

 

 

Video (RCA)

1EA (Audio included)

1EA (Audio included)

1EA (Audio included)

 

 

 

 

 

 

Component(Y/Cb/Cr)

2EA (Audio included)

2EA (Audio included)

2EA (Audio included)

 

 

 

 

 

 

Antenna

1EA

1EA

1EA

 

 

 

 

 

 

PC Connection jack

D-SUB

D-SUB

D-SUB

 

Max. resolution

1024 X 768 @ 75 Hz

1024 X 768 @ 75 Hz

1024 X 768 @ 75 Hz

 

Audio

L/R

L/R

L/R

 

 

 

 

 

 

HDMI-HDCP

1EA

1EA

1EA

 

 

 

 

 

 

Memory Slot

No

No

No

 

 

 

 

 

Output

Video

1EA

1EA

1EA

 

 

 

 

 

 

Audio

2EA (L/R, SPDiF)

2EA (L/R, SPDiF)

2EA (L/R, SPDiF)

 

 

 

 

 

TV/Video

Analog

NTSC M / FM

NTSC M / FM

NTSC M / FM

 

 

 

 

 

 

Digital

ATSC

ATSC

ATSC

 

 

 

 

 

 

Video system

Component, S-Video,

Component, S-Video,

Component, S-Video,

 

 

Composite, PC, HDMI

Composite, PC, HDMI

Composite, PC, HDMI

 

 

 

 

 

Power

Supply

AC 100 - 240 V, 50/60 Hz

AC 100 - 240 V, 50/60 Hz

AC 100 - 240 V, 50/60 Hz

 

 

 

 

 

 

Consumption power

Typical 130W

Typical 150W

Typical 170W

 

 

 

 

 

 

Stand-by power

Under 5W

Under 5W

Under 5W

 

 

 

 

Dimension (W x D x H mm - Stand included)

815 x 194 x 476.5

965 x 229 x 551

1090 x 310 x 627

 

 

 

 

Weigh (Stand included)

12.6 Kg

17.0 Kg

26.6Kg

 

 

 

 

 

Control type

 

Remote control, Key control

Remote control, Key control

Remote control, Key control

 

 

 

 

 

- The above specifications may be subject to change without prior notice.

APPENDIX

65

HYUNDAI LCD TV

APPENDIX