Husqvarna PAC IV-10Y, PAC IV-14KM, PAC IV-11R, PAC IV-13.5R, PAC IV-14KC User Manual

IPL, PAC IV,2007-07, 542 20 11-32

PORT-A-CUT IV

			Spare Parts
			Piezas de repuesto
PAC IV–75E	PAC IV–8KM	PAC IV–9W	PAC IV–10Y
PAC IV–11R	PAC IV–13H	PAC IV-13.5R	PAC IV–14KC
PAC IV–14KCR	PAC IV–14KM	PAC IV–16KM	PAC IV–16BV
PAC IV–18BV	PAC IV–18H	PAC IV–20H (Engine Mounted Fuel Tank)
		PAC IV–20H (Cowl Mounted Fuel Tank)

This Document Supersedes ONLY The “Parts List” Section of

Document P/N 0A7669 “PAC IV Operating Instruction & Parts List”.

Continue Usage Of P/N 0A7669 “Operating Instructions & Parts List” As “Operating Instructions” for 8KM, 9W, 10Y, 11R, 16BV, 18BV Models.

Este documento reemplaza SOLAMENTE a la “Lista de Piezas” del documento P/N 0A7669 “Instrucciones de Operación y Lista de Piezas del PAV IV”.

Continúa el uso de P/N 0A7669 “Instrucciones de Operación y Lista de Piezas” como “Instrucciones de Operación” para los modelos 8KM, 9W, 10Y, 11R, 16BV, 18BV.

542 20 11-32

HUSQVARNA CONSTRUCTION PRODUCTS

PARTS LIST INDEX

For quick supply of spare parts and to avoid any lost time, it is essential to quote the data on the manufacturer’s plate fixed to the machine and the part description to be replaced with every order.

Model Designation Key

	Model			POWER SOURCE		Model	POWER SOURCE
	PACIV-75E			7-1/2 HP Baldor Electric (3 Phase)		PACIV - 14KC	14 HP Kohler Command (Electric)
PACIV-8KM *				8 HP Kohler Magnum		PACIV - 14KCR	14 HP Kohler Command (Recoil)
	PACIV-9W *			9 HP Wisconsin		PACIV - 14KM *	14 HP Kohler Magnum
PACIV-10Y **				10 HP Yanmar Diesel		PACIV - 16KM	16 HP Kohler Magnum
	PACIV-11R *			11 HP Robin		PACIV - 16BV *	16 HP Briggs & Stratton
	PACIV-13H			13 HP Honda		PACIV - 18BV *	18 HP Briggs & Stratton
PACIV-13.5R				13.5 HP Robin		PACIV - 18H *	18 HP Honda
						PACIV - 20H	20 HP Honda
* Model Out Of Production – Shown For Service Parts Only
** 10Y Model Available Only Upon Special Request
	DESCRIPTION						PAGE
	Warnings.........................................................................................................................................						4 - 5
	Figures & Parts Lists & Wiring Diagrams:
1.		Frame Group ....................................................................................................................					6 - 9
2.		Engine & Blade Shaft Group ............................................................................................					10 - 15
3.		Drivematic Group .............................................................................................................					16	– 18
4.		Fuel Tank Group – 20H....................................................................................................					19
5.		Accessories ......................................................................................................................					20 - 21
6.		Wide Cutting Kits (3/4″ & 1″ Wide) (Special Option)........................................................					22	- 24
7.		Electrical Components (7-1/2 Electric Model Only) .........................................................					25
8.		Wiring Diagram: 75E ........................................................................................................					26
9.		Notes: ...............................................................................................................................					27
10.		Notes: ...............................................................................................................................					27
11.		Wiring Diagram: 8KM .......................................................................................................					28
12.		Wiring Diagram: 9W .........................................................................................................					28
13.		Wiring Diagram: 10Y ........................................................................................................					29
14.		Wiring Diagram: 11R........................................................................................................					29
15.		Wiring Diagram: 13H........................................................................................................					30
16.		Wiring Diagram: 14KM .....................................................................................................					30
17.		Wiring Diagram: 14KC .....................................................................................................					31
18.		Wiring Diagram: 14KCR...................................................................................................					32
19.		Wiring Diagram: 16KM .....................................................................................................					33
20.		Wiring Diagram: 16BV / 18BV..........................................................................................					34
21.		Wiring Diagram: 18H & 20H.............................................................................................					35
22.		Wiring Diagram: 20H (Red Stripe Wire Harness)				............................................................	36
23.		Wiring Diagram: 20H (Blue Stripe Wire Harness)............................................................					37
	Decal Descriptions and Locations ..................................................................................................						38 - 40
	Engine Mounting Locations & Base Attaching Points ....................................................................						41
	Option Availability Chart - Per Model .............................................................................................						43 - 45
	Repair and Spare Parts .................................................................................................................						45
	Additional Warnings........................................................................................................................						Back Cover

2

INDICE DE LA LISTA DE PIEZAS

Para una rápida provisión de las piezas de repuesto y para evitar cualquier pérdida de tiempo, con cada orden de compra es esencial mencionar los datos de la placa del fabricante fijada a la máquina y la descripción de la pieza a ser reemplazada.

Clave de Designación de Modelos

	Modelo			FUENTE DE ENERGIA	Modelo	FUENTE DE ENERGIA
	PACIV-75E			7-1/2 HP, Baldor Eléctrico (3 Fases)	PACIV-14KC	14 HP, Kohler Command (Electric)
PACIV-8KM *				8 HP, Kohler Magnum	PACIV-14KCR	14 HP, Kohler Command (Recoil)
	PACIV-9W *			9 HP, Wisconsin	PACIV-14KM *	14 HP, Kohler Magnum
PACIV-10Y **				10 HP, Yanmar Diesel	PACIV-16KM	16 HP, Kohler Magnum
	PACIV-11R *			11 HP, Robin	PACIV-16BV *	16 HP, Briggs & Stratton
	PACIV-13H			13 HP, Honda	PACIV-18BV *	18 HP, Briggs & Stratton
PACIV-13.5R				13.5 HP Robin	PACIV-18H *	18 HP, Honda
					PACIV-20H	20 HP, Honda
* Modelo fuera de producción – Se muestra para piezas de repuesto solamente
** Modelo 10Y disponible como pedido especial solamente
	DESCRIPCION					PAGINA
	Advertencias....................................................................................................................................					4 – 5
	Listas de Ilustraciones y Piezas y Diagramas de Cableado:
1.		Grupo de Marco ................................................................................................................				6 - 9
2.		Grupo del Motor y Eje de la Hoja......................................................................................				10 - 15
3.		Transmisión Automática ...................................................................................................				16	– 18
4.		Grupo de tanque de combustible – 20H ...........................................................................				19
5.		Accesorios.........................................................................................................................				20 - 21
6.		Equipos para Corte Ancho (3/4″ y 1″ de Ancho) (Opción Especial)				................................22	- 24
7.		Componentes Eléctricos (Modelo Eléctrico 7-1/2 Solamente) .........................................				25
8.		Diagrama de Cableado: 75E.............................................................................................				26
9.		Notas:................................................................................................................................				27
10.		Notas:................................................................................................................................				27
11.		Diagrama de Cableado: 8KM............................................................................................				28
12.		Diagrama de Cableado: 9W..............................................................................................				28
13.		Diagrama de Cableado: 10Y.............................................................................................				29
14.		Diagrama de Cableado: 11R ............................................................................................				29
15.		Diagrama de Cableado: 13H ............................................................................................				30
16.		Diagrama de Cableado: 14KM..........................................................................................				30
17.		Diagrama de Cableado: 14KC..........................................................................................				31
18.		Diagrama de Cableado: 14KCR .......................................................................................				32
19.		Diagrama de Cableado: 16KM..........................................................................................				33
20.		Diagrama de Cableado: 16BV / 18BV ..............................................................................				34
21.		Diagrama de Cableado: 18H / 20H...................................................................................				35
22.		Diagrama de Cableado: 20H ............................................................................................				36
23.		Diagrama de Cableado: 20H ............................................................................................				37
	Descripciones y Localizaciones de Calcomanías ...........................................................................					38	- 40
	Localizaciones del Montaje del Motor y Puntos de Colocación de Bases......................................					41
	Tabla de Disponibilidad de Opciones - Por Modelo........................................................................					43	- 45
	Piezas de Repuesto y Reparación .................................................................................................					45
Advertencias Adicionales .......................................................................................						Cubierta Posterior

3

SAFETY FIRST!!

WARNINGS

WARNING: FAILURE TO COMPLY WITH THESE WARNINGS AND INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS INJURY.

Each machine is supplied with an operating instruction manual. Operators and maintenance people of this equipment must read and be familiar with the safety warnings in the operation manual. Failure to obey the warnings may result in serious injury or death. Follow instructions strictly to ensure long service in normal operation. If you do not have an operator’s manual (P/N 0A7768), call TOLL FREE 1-800-288-5040.

Read the entire operator’s manual before operating this machine. Understand all the warnings, instructions and controls. If you do not have an operator’s manual (P/N 0A7768) call TOLL FREE 1-800-288-5040.

Always park the machine on a level surface with the engine “OFF” and the ignition switch set in the “OFF” position before performing any maintenance. Let the machine cool down! Disconnect battery!

The manufacturer accepts no responsibility caused by unsuitable use or modifications.

For repairs and service parts, contact you authorized DB/T dealer.

This saw was designed for certain applications only DO NOT modify this saw or use for any application other than for which it was designed. If you have any questions relative to its application, DO NOT use the saw until you have contacted Diamant Boart Inc. and we have advised you.

Husqvarna Construction Products North America

17400 West 119th Street

Olathe, Kansas 66061

Telephone: [phone]

4

¡SEGURIDAD ANTE TODO!

ADVERTENCIAS

ADVERTENCIA: EL NO RESPETAR ESTAS ADVERTENCIAS E INSTRUCCIONES DE OPERACION PUEDE PROVOCAR GRAVES LESIONES O LA MUERTE.

Cada máquina se suministra con un manual de instrucciones de operación. Los operadores y los mecánicos de este equipo deben leer y familiarizarse con las advertencias de seguridad dadas en este manual. El no respetar las advertencias puede provocar graves lesiones o la muerte. Siga las instrucciones al pie de la letra para asegurar una larga vida de servicio durante operación normal. Si no tiene un manual del operador (N/P 0A7768), llame a su concesionario Target más cercano. Si se necesitan ejemplares adicionales, lammar SIN CARGO al 1-800-288-5040.

Lea todo este manual y familiarícese con el funcionamiento de la máquina antes de ponerla en marcha. Entienda todas las advertencias, instrucciones y controles. Si no tiene un manual del operador (N/P 0A7768), llame a su concesionario Target más cercano. Si se necesitan ejemplares adicionales, lammar SIN CARGO al 1-800-288-5040.

Siempre estacione la máquina en una superficie plana con el motor APAGADO y el interruptor de encendido puesto en la posición APAGADO (OFF) antes de hacer trabajos de mantenimiento en la máquina. ¡Deje que la máquina se enfríe! ¡Desconecte la batería! El fabricante no se hace responsable del uso o modificaciones indebidas!

El fabricante no se hace responsable del uso o modificaciones indebidas!

Para reparaciones y piezas de repuesto, póngase en contacto con el concesionario DB/T autorizado.

Esta sierra fue diseñada para ciertas aplicaciones solamente. NO la modifique ni utilice para ninguna otra aplicación salvo aquéllas para las cuales fue diseñada. En caso de dudas respecto a su aplicación, NO use la sierra sin antes haber consultado por escrito a Diamant Boart, Inc. y haber recibido nuestras indicaciones.

Husqvarna Construction Products North America

17400 West 119th Street

Olathe, Kansas 66061

1-800-288-5040

5

FIGURE 1 – Frame Group / Grupo de Marco

88

90

89

6

FIGURE 1 – Parts List (Items 1 - 62) (See Notes for Items Marked With “C” or “D”)

							(REV 2-12-2007)
Diag	Part	Qty		Diag	Part	Qty
Loc.	No.	Req	Description (* Denotes Metric Item)	Loc.	No.	Req	Description (* Denotes Metric Item)
1	502437901	1	Frame (Metric) – Husq Gray	36	020010	1	Key, Woodruff (ANSI #405)
*1	167835	1	Frame Weldment (Metric) – Black
2	020551	2	Setscrew, Socket Hd., 5/16"-18 x 1/4"	37	167878	1	Spacer, Zinc Plated
3	139579	1	Axle, Rear	38	542190434	1	Bearing, 1/2" Bore
4	049923	2	Collar, Lock, 5/8" Bore	*39	139761	2	Capscrew, Hex Hd., M6 x 1.0 x 20mm
4A	020551	2	Setscrew, Socket Hd., 5/16"-18 x 1/4"	*40	139745	2	Locknut, Fiber, M6 x 1.0
5	020747	4	Washer, Flat, 5/8" USS	41	------	--	Use Item 41C or 41D (See Note C or D)
6	040126	2	Wheel, 6" OD, 5/8" Bore	41C	139024	1	Crank, Handle (NLA use 177951)
*7	167833	2	Support, Engine Base (Metric)	41D	177922	1	Crank, Handle
*8	139749	6	Capscrew, Hex Hd., M10 x 1.5 x 25mm	42	020788	1	Lockwasher, Split, 1/2"
*9	162004	6	Lockwasher, Split, M10	43	030210	1	Nut, Acorn, 1/2"-13 UNC
*10	167831	1	Base, Engine (Metric)	44	------	--	Use Item 44C or 44D (See Note C or D)
*11	139741	4	Capscrew, Hex Hd., M12 x 1.75 x 30mm	44C	139022	1	Bolt, Shoulder, 1/2" DIA, 3/8"-16 UNC
12	020788	4	Lockwasher, Split, 1/2"	44D	------	--	------------
13	020745	4	Washer, Flat, 1/2"	45	------	--	Use Item 45C or 45D (See Note C or D)
*14	167439	1	Capscrew, Hex Hd, M12 x 1.75 x 100mm	45C	139100	1	Handle, Plastic, 3/8"-16 UNC
*15	167819	3	Bracket, Guard Mounting (Metric)	45D	032250	1	Handle, Aluminum, Revolving (Press Fit)
*16	197227	6	Capscrew, Hex Hd., M8 x 1.25 x 20mm	46	139021	1	Valve, Water
*17	020785	6	Lockwasher, Split, M8	47	020405	2	Screw, Round Hd, Phillips, #10-24 x 3/8"
18	502437801		Shaft Guard – Husq Gray	48	020782	2	Lockwasher, Split, #10
18	167837	1	Shaft Guard Weldment				Use Item 49C or 49D (See Note C or D)
*19	177067	2	Capscrew, Hex Hd., M8 x 1.25 x 85mm	49	------	--
*20	020785	2	Lockwasher, Split, M8	49C	020810	1	Fitting, 90 Street Elbow, 1/2" NPT
21	167775	1	Front Axle Weldment	49D	------	--	------------
							Use Item 50C or 50D (See Note C or D)
22	043260	2	Collar, 1" Bore	50	------	--
*23	167781	2	Pivot Block (Metric)	50C	167897	1	Fitting, 90 Male Elbow, 1/2" NPT
24	041175	2	Grease Fitting	50D	------	--	------------
*25	139749	4	Capscrew, Hex Hd., M10 x 1.5 x 25mm	51	------	--	Use Item 51C or 51D (See Note C or D)
*26	162004	4	Lockwasher, Split, M10	51C	167960	1	Fitting, 45 Street Elbow, 1/2" NPT
27	020768	4	Washer, Flat, 3/4" SAE	51D	------	--	------------
28	020614	2	Cotter Pin, 1/8" Dia x 1" Long	52	045642	1	Hose Fitting & Filter Washer
29	040091	2	Wheel, 5" DIA				Use Item 53C or 53D (See Note C or D)
30	160164	1	Pin, Yoke	53	------	--
				53C	167892	1	Hose Assy, 1/2" ID x 40" Long
31	020766	1	Washer, Flat, 1/2" SAE	53D	176177	1	Hose Assy, 1/2" ID x 49" Long
32	177239	1	Pin, Rue Ring,1/2" DIA	54	502437601		Bar, Pointer, Straight – Husq Gray
			Use Item 33C or 33D (See Note C or D)
33	------	--		54	167906	1	Bar, Pointer, Straight - Black
33C	177026	1	Adjustment Nut w/ Fitting, 5/8-11UNC	55
33D	177954	1	Adjustment Nut w/ Fitting, 5/8-8 ACME		502437701		Bar, Pointer, Offset – Husq Gray
34	------	--	Use Item 34C or 34D (See Note C or D)	55	167908	1	Bar, Pointer, Offset - Black
34C	040139	1	Grease Fitting	56	041231	1	Rod, Pointer, 3/8"-16 UNC
34D	163140	1	Grease Fitting (2-5/8” Long)	57	041220	1	Wheel, 3" Dia, w/Bushing
35	------	--	Use Item 35C or 35D (See Note C or D)	58	020199	1	Locknut, Fiber, 3/8"-16 UNC
35C	167789	1	Screw, Adjustment, 5/8-11UNC	*59	139749	2	Capscrew, Hex Hd., M10 x 1.5 x 25mm
35D	177915	1	Screw, Adjustment, 5/8-8 ACME	*60	139748	2	Locknut Fiber, M10 x 1.5
				*61	197227	1	Capscrew, Hex Hd., M8 x 1.25 x 20mm
				*62	139738	1	Locknut, Fiber, M8 x 1.25

Notes:

C)These Items (Marked with a C) Effective from First Unit Production (S/N 167250) To Approx. February, 2000.

D)These Items (Marked with a D) Effective Spring (Approx. February) 2000.

7

FIGURE 1 – Frame Group / Grupo de Marco

88

90

89

8

FIGURE 1 – Parts List (Items 63 - 99) (See Notes for Items Marked With “C” or “D”)

								(REV 2-12-2007)
	Diag	Part	Qty		Diag	Part	Qty
	Loc.	No.	Re	Description (* Denotes Metric Item)	Loc.	No.	Req	Description (* Denotes Metric Item)
			q			020762		Washer, Flat, 1/4" SAE
	63	177025	1	Front Pointer Assy (# 54-59 & #89-92)	88		2
	64	167911	1	Handle Bar Weldment	89	172137	1	Rope, 5/32" x 80" Long (Nylon)
	65	139568	2	Grip, Handle Bar	90	162761	3	Clamp, Hose
	66	177557	2	Knob, Handle, 3/8"-16 UNC	91	020136	1	Nut, Std. Hex, 3/8"-16
	67	502437501	1	Control Panel – Husq Gray	92	020786	1	Lockwasher, Split, 3/8"
	67	------	--	Use of Item 67C or 67D (See Note C or D)	93	041160	2	Collar, Lock, 3/4" Bore
	67C	167800	1	Control Panel Weldment, PC Blue	94	020766	1	Washer, Flat, 1/2" SAE
	67D	177909	1	Control Panel Weldment, PC Black				Use Item 95C or 95D (See Note C or D)
	*68	197227	9	Capscrew, Hex Hd., M8 x 1.25 x 20mm	95	------	--
	69	020763	9	Washer, Flat, 5/16" SAE	95C	------	--	----------
	*70	139738	9	Locknut, Fiber, M8 x 1.25	95D	177923	1	Latch, Crank Handle, Zinc Plated
	*71	177930	1	Cowl Weldment, PC Blue (Metric)
	71	502437401	1	Cowl Weldment - Husq Orane				Use Item 96C or 96D (See Note C or D)
	*72	139749	4	Capscrew, Hex Hd., M10 x 1.5 x 25mm	96	------	--
					96C	------	--	----------
	*73	173014	4	Washer, Flat, M10	96D	171710	1	Washer, Wave Spring, .28 ID
	*74	139748	4	Locknut, Fiber, M10 x 1.5	97	------	--	Use Item 97C or 97D (See Note C or D)
	75	502437301	1	Cover, Rear Cowl, Husq Gray
	75	167807	1	Cover, Rear Cowl, PC Black (See Note “E”)	97C	------	--	----------
	*76	167925	4	Capscrew, Flange Hd., M8 x 1.25 x 30mm	97D	161531	1	Washer, Fiber, .75x.265x.093” Thick
								Use Item 98C or 98D (See Note C or D)
	*77	139738	4	Locknut, Fiber, M8 x 1.25	98	------	--
	78				98C	------	--	----------
		502447801	1	Shield, RH – Husq Orange	98D	139761	1	Capscrew, Hex Hd., M6 x 1.00 x 20mm
	78	167814	1	Shield, RH (See Note “E”)				Use Item 99C or 99D (See Note C or D)
	*79	197227	3	Capscrew, Hex Hd., M8 x 1.25 x 20mm	99	------	--
	80	020785	3	Lockwasher, Split, 5/16"	99C	------	--	----------
	81	020763	3	Washer, Flat, 5/16" SAE	99D	139745	1	Locknut, Fiber, M6 x 1.00
	82	502444701	1	Belt Guard (Standard) – Husq Orange
	82	502444601	1	Belt Guard (Tall) – Husq Orange
	—	167825	1	Belt Guard (Standard)
	—	167969	1	Belt Guard (Tall) (5E,7.5E,14KM, 18-20H)
	—	177002	1	Belt Guard (10Y Only)
	—	177595	1	Belt Guard (14KCR)
	*83	197227	5	Capscrew, Hex Hd., M8 x 1.25 x 20mm
	*84	020785	5	Lockwasher, Split, M8
	85	020763	5	Washer, Flat, 5/16" SAE
	86	163988	1	Wrench, 1-1/16" Open End
	*87	197170	1	Wing Bolt, M6 x 1.0 x 16mm

Notes:

C)These Items (Marked with a C) Effective from First Unit Production (S/N 167250) To Approx. February, 2000).

D)These Items (Marked with a D) Effective Spring (Approx. February, 2000).

E)These Items Used Only On Drivematic Equipped Models Effective Spring (Approx. February) 2000. Eliminated from Push Models – can be purchased separately for Push models Effective Spring 2000.

9

FIGURE 2 – Engine & Blade Shaft Groups / Grupo del Motor y Eje de la Hoja

10

FIGURE 2 - Parts List (Items 1 – 12)

							(REV 2-12-2007)
					PART
DIAG	PART	QTY		DIAG		QTY
LOC.	NO.	REQ	DESCRIPTION (* Denotes Metric Item)	LOC.	NO.	REQ	DESCRIPTION (* Denotes Metric Item)
1	139214	1	Engine, 8KM	*5	139765	4	Capscrew, Hex., M10x1.5x40mm
—	011401	1	Engine, 9W				(10Y, 13.5R, 16KM)
—	177015	1	Engine, 10Y (Diesel)	*––	167748	4	Capscrew, Hex Hd., M10x1.5x65mm (18H, 20H)
—	177118	1	Engine, 11R				(For 20H, Before S/N 422140–See Note L)
—	167821	1	Engine, 13H	*––	725250001	4	Capscrew, Hex Hd., M10x1.5x45mm ( 20H)
—	196010	1	Engine, 13.5R				(Eff S/N 422140 for 20H–See Note L)
—	167861	1	Engine, 14KC (Electric Start Only)	*—	139766	4	Capscrew, Hex Hd, M10x1.5x45mm (11R, 13H)
—	177607	1	Engine, 14KCR (Recoil Start Only)	*—	047792	4	Capscrew, Hex Hd, M10 x 1.5 x 30 mm (8KM)
—	167996	1	Engine, 14KM	*—	167749	4	Capscrew, Hex Hd, M10 x 1.5 x 90 mm (9W)
—	139250	1	Engine, 16KM	—	020323	4	Capscrew, Hex Hd., 3/8-16UNC x 1”
—	139697	1	Engine, 16BV				(Full Thread) (14KC, 14KCR)
—	167981	1	Engine, 18BV	*––	173058	4	Capscrew,Hex Hd.,M8x1.25x45mm (16BV, 18BV)
—	177282	1	Engine, 18H (No Longer Available)
—	177461	1	Engine, 20H (See Note J)	6	173014	4	Washer, Flat, M10
—	190334	1	Engine, 20H, Modified (See Note J)				(8KM, 9W, 10Y, 11R, 13H, 13.5R, 16KM, 20H)
—	190092	1	Engine, 20H (See Note J)	—	020743	4	Washer, Flat, 3/8" (14KC)
1A	020067	1	Key, 1/4" Sq. x 1-1/4"	*—	020742	4	Washer, Flat, 5/16" (16BV, 18BV)
—	020078	1	Key, 1/4" Sq. x 3/4" (14KM, 16KM)	*7	139748	4	Locknut, Fiber, M10 x 1.5
—	177608	1	Key, Bevel, 1/4" Sq. x 2-5/8” (14KCR)				(8KM, 9W, 10Y, 11R, 13H, 13.5R, 16KM, 18H, 20H)
				—	020786	4	Lockwasher, Split, 3/8" (14KC, 14KCR)
1B	—------	1	Element, Air Cleaner (See Note “A”)	*—	020199	2	Locknut, Fiber, 3/8"-16 (14KM)
—	177528	1	Element, Air Cleaner (18H, 20H)	*8	167133	1	Fitting, M12 x 10mm Barb (13H)
2	177014	1	Motor, Electric (51E)	*—	177065	1	Fitting Assy, M14 x 3/8” Barb (11R, 13.5R)
—	000923	1	Motor, Electric (53E)	—	020819	1	Fitting, 3/8" NPT x 3/8" Barb
—	167994	1	Motor, Electric (75E)				(9W, 14KC, 14KCR, 16BV, 18BV)
				—	177017	1	Fitting, 1/2" NPT x 3/8" Barb (8KM)
3	167746	1	Pulley, 3G3V2.65, 1GRL-1.00 w/SS	—	177018	1	Fitting, 3/4" NPT x 3/8" Barb (14KM,16KM)
			(8KM, 10Y, 11R, 13H, 13.5R)	––	––	1	Fitting, Oil Drain (18H, 20H )
—	139298	1	Pulley, 3G3V3.15 - 1.125 w/SS (9W)				(Honda # 15558-ZJ1-010AH)
—	139288	1	Pulley, 3G3V2.65-1.125-w/SS	—	177019	1	Fitting Assy, M16 x 1.5 x 3/8" Barb (10Y)
			(14KM, 14KC, 14KCR)
—	167942	1	Pulley, 4G3V2.65 - 1.125 w/SS	*9	167305	1	Hose Assembly, Oil Drain (All except noted)
			(16KM, 20H) (See Note J)	––	020967	1	Hose, Oil Drain (12") (18H, 20H Only)
—	167889	1	Pulley, 4G3V2.65-1.00 w/SS	––	167304	1	Hose Assembly, Oil Drain (14KCR)
			(16BV, 18BV, 18H, 20H) (See Note J)
—	060139	1	Pulley, 2G3V2.65 - .875 w/SS (5E)	10	020049	1	Hose Clamp
—	041134	1	Pulley, 3G3V2.80 - 1.375 w/SS (75E)	*11	167307	1	Blanking Cap
3A	020550	2	Setscrew,Soc. Hd, 5/16-18 x 3/8" (5E, 7.5E)	*12	167623	1	Tube Nut, M16
—	020540	2	Setscrew,Soc. Hd,1/4-20 x 1/4" (13-20 HP)
—	020541	2	Setscrew, Soc. Hd, 1/4-20 x 3/8" (9 W)
4	161499	2	V-Belt, 3VX355 (51E, 53E)
—	163857	3	V-Belt, 3VX425 (75E)
—	163869	3	V-Belt, 3VX375 (10Y)
—	161499	3	V-Belt, 3VX355 (8KM, 11R, 13H, 13.5R, 14KC)
—	163857	3	V-Belt, 3VX425 (14KCR)
—	172281	3	V-Belt, 3VX400 (9W, 14KM)
—	163869	4	V-Belt, 3VX375 (16KM, 18H, 20H-See Note L)
			(For 20H, Before S/N 422140–See Note L)
	161499	2	V-Belt, 3VX355 (51E, 53E)
—	161499	4	V-Belt, 3VX355 (16BV, 18BV, 20H-See Note L)
			(Eff S/N 422140 for 20H–See Note L)

See Notes on Page 15

11

FIGURE 2 – Engine & Blade Shaft Group / Grupo del Motor y Eje de la Hoja (Continued)

12

FIGURE 2- Parts List (Items 13 - 72)

								(REV 2-12-2007)
						PART
	DIAG	PART	QTY		DIAG		QTY
	LOC.	NO.	REQ	DESCRIPTION (* Denotes Metric Item)	LOC.	NO.	REQ	DESCRIPTION (* Denotes Metric Item)
	13	164238	1	Clamp (Used On 1994 Models Only)	*42	167943	1	Blade Guard Assy – 14” (Complete)
	––	166673	1	Clamp, Insulated, 5/8” I.D. x 1/4" Hole (14kcr)	*—	195129	1	Blade Guard - Compl – 18” Husq Gray
	*14	139761	1	Capscrew, Hex Hd., M6 x 1.0 x 20mm	*—	195140	1	Blade Guard - Compl – 20” Husq Gray
					43	502447301	1	Blade Guard, Front – 18” Husq Gray
	––	163688	1	Capscrew, Hex Hd., M6 x 1.0 x 16mm (14kcr)	43	502447701	1	Blade Guard, Front – 20” Husq Gray
	*15	139745	1	Locknut, Fiber, M6 x 1.0	—	139076	1	Front Blade Guard Weldment – 14”
	*16	167478	1	Capscrew, Hex Hd., M8 x 1.25 x 25mm	—	139596	1	Front Blade Guard Weldment – 18” (Note H)
					—	195120	1	Front Blade Guard Weldment – 18” (Note H)
	—	139749	4	Capscrew, Hex Hd., M10 x 1.5 x 25mm (14KCR)	—	180846	1	Front Blade Guard Weldment – 20” (Note H)
					—	195134	1	Front Blade Guard Weldment – 20” (Note H)
	17	020763	2	Washer, Flat, 5/16" SAE	44	------	--	Rear Blade Guard - Not Available Use Item 42
	—	173014	4	Washer, Flat, M10 (14KCR)	45	139075	1	Hinge (Note H)
	*18	139738	1	Locknut, Fiber, M8 x 1.25
					45A	195127	1	Hinge (Note H)
	—	139748	4	Locknut, Fiber, M10 x 1.5 (14KCR)	*46	139761	6	Capscrew, Hex Hd, M6 x 1.0 x 20mm (Note H)
	*19	139749	3	Capscrew, Hex Hd., M10 x 1.5 x 25mm	*46A	167478	6	Capscrew, Hex Hd M8 x 1.25x25mm (Note H)
	*20	173014	3	Washer, Flat, M10	47	020762	6	Washer, Flat, 1/4" SAE (Note H)
	*21	139748	3	Locknut, Fiber, M10 x 1.5	*47A	173059	6	Washer, Flat, M8 (Note H)
	*22	139749	4	Capscrew, Hex Hd, M10 x 1.5 x 25mm (5E, 75E)	*48	139745	6	Locknut, Fiber, M6 x 1.0 (Note H)
	*23	173014	4	Washer, Flat, M10	*48A	139748	7	Locknut, Fiber, M8 x 1.25 (Note H)
	*24	139748	4	Locknut, Fiber, M10 x 1.5	49	040275	1	Fitting, 3/8" NPT Male x 3/4" Male
	25	167990	1	Motor Base (75E)	50	139045	1	Manifold
	—	177599	1	Engine Base (14KCR)	51	139051	1	Gasket, Manifold
	26	167992	2	Spacer, Engine (9W, 14KM, 18H, 20H)
					*52	167551	4	Capscrew, Hex Hd, M6 x 1.0 x 40mm
	27	020365	2	Capscrew, Hex Hd., 3/8"-16 x 2-1/4"	*53	139745	4	Locknut, Fiber, M6 x 1.0
	28	020323	2	Capscrew, Hex Hd.,3/8-16 x 1"(Full Thread)	54	167045	2	Water Tube -14"
	29	020377	2	Capscrew, Hex Hd., 3/8"-16 x 1-1/2"	—	167046	2	Water Tube -18" & 20"
	30	167894	1	Blade Shaft-Complete-3 Groove (5 – 14 HP)	55	020864	2	Plug, 1/8" NPT
	—	167893	1	Blade Shaft-Complete-4 Groove (16 – 20 HP)	56	049212	2	Clamp, Water Tube
	31	167846	1	Nut, 5/8"-11UNC-LH Thread (Black Finish)	*57	167818	4	Screw, Flat Hd., M6 x 1.0 x 16mm
	32	167962	1	Outer Collar w/ Drive Pin	*58	139745	4	Locknut, Fiber, M6 x 1.0
	32A	167964	1	Drive Pin, 3/8" Dia x 1-1/8" Long	59	040330	1	Spring
	33	167961	1	Blade Shaft w/ Inner Collars	*60	167761	2	Capscrew, Hex Hd, M5 x 0.8 x 20mm
	33A	167185	2	Inner Collar	*61	172011	4	Nut, Standard Hex M5 x 0.8
	34	020067	1	Key, 1/4" Sq. x 1-1/4"	62	020782	2	Lockwasher, Split, #10
	35	167895	2	Bearing w/Collar & SS (Eccentric Lock)	*63	197227	1	Capscrew, Hex Hd M8 x 1.25 x 20mm
	36	020540	2	Setscrew, Socket Hd., 1/4"-20 x 1/4"	*64	020785	1	Lockwasher, Split, M8
	*37	139752	4	Capscrew, Hex Hd., M10 x 1.5 x 75mm	*65	167749	1	Capscrew, Hex Hd, M10 x 1.5 x 90mm
	*38	173014	4	Washer, Flat, M10	*66	162004	1	Lockwasher, Split, M10
	*39	139748	4	Locknut, Fiber, M10 x 1.5	*67	173014	1	Washer, Flat, M10
					68	139255	1	Battery, 12V, 230 CCA – WET
	40	139300	1	Pulley, 3G3V3.65-1" w/SS (5 - 14HP )	--	139255A	1	Battery, 12V, 230 CCA - DRY (Opt.)
	—	167896	1	Pulley, 4GR3V3.65-1" w/SS (16 - 20 HP)
	40A	020541	2	Setscrew, Soc. Hd., 1/4"-20x3/8" (For 139300)	*69	167786	1	Battery Box Weldment
	—	020541	4	Setscrew, Soc. Hd., 1/4"-20x3/8" (For 167896)	70	167036	1	Strap, Battery Mount (Includes Item70A)
				Nut, 5/8"-11UNC-RH Thread (Gray Finish)	70A	163248	1	Strip, Sponge Rubber (15 inches)
	41	167847	1		*71	197227	2	Capscrew, Hex Hd, M8 x 1.25 x 20mm
					72	020785	2	Lockwasher, Split, 5/16”

See Notes on Page 15

13

FIGURE 2 – Engine & Blade Shaft Group / Grupo del Motor y Eje de la Hoja (Continued)

14

FIGURE 2- Parts List (Items 73 - 105)

								(REV 2-12-2007))
						PART
	DIAG	PART	QTY		DIAG		QTY
	LOC.	NO.	REQ	DESCRIPTION (* Denotes Metric Item)	LOC.	NO.	REQ	DESCRIPTION (* Denotes Metric Item)
	73	020763	2	Washer, Flat, 5/16” SAE	88	167959	1	Weight Kit (26 lbs.) (Optional)
	*74	197227	2	Capscrew, Hex Hd., M8 x 1.25 x 20mm	89	180418	4	Weight Bar-1/2" Thick (6-1/2 lbs. Each)
	75	020763	2	Washer, Flat, 5/16" SAE	—	—	2	Weight Bar-1" Thick (13 lbs. Each)
	*76	139738	2	Locknut, Fiber, M8 x 1.25	—	—	—	(1" Not Available Use 2 Of P/N 180418)
	*77	197227	1	Capscrew, Hex Hd., M8 x 1.25 x 20mm	90	020329	2	Capscrew, Hex Hd., 3/8"-16 x 2-3/4"
	78	020785	1	Lockwasher, Split, 5/16"	91	020199	2	Locknut, Fiber, 3/8"-16
					92	167963	1	Outer Collar Assy-1/2"Cut (Optional)
	79	020763	1	Washer, Flat, 5/16" SAE
	80	177063	1	Battery Cable (+) (RED)	93	167865	1	Outer Collar, 4.50 OD x 1/2" Cut
	––	542190395	1	Battery Cable (+) (RED)(14KC,18H,20H)	94	020304	1	Drive Pin, 3/8" x 1-1/2"
	*81	167891	1	Battery Cable, (-) (BLACK)	95	167189	1	Tiedown Bracket Kit (Optional)
	*82	163688	2	Capscrew, Hex Hd., M6 x 1.0 x 16mm	96	167125	2	Eyenut, Saw Tiedown, 3/8"-16UNC
	*83	139745	2	Locknut, Fiber, M6 x 1.0	97	020323	2	Capscrew, Hex Hd., 3/8"-16 x 1"
	84	167735	1	Ignition Switch w/ Key (16KM)	98	020786	2	Lockwasher, Split, 3/8"
	––	163830	1	Ignition Switch w/Key (18H, 20H ) (Notes C & F)	99	167985	1	Fitting, 45 Deg Street, 3/8" NPT (9W)
	––	177920	1	Ignition Switch w/Key (18H, 20H ) (Notes D & F)	100	139098	1	Flap, Splash
					*101	167761	2	Capscrew, Hex Hd., M5 x 0.8 x 20mm
	85	139272	1	Wiring Harness (16KM)	*102	173047	2	Washer, Flat, M5
	––	177283	1	Wiring Harness (18H, 20H) (See Notes C & G)	*103	172316	2	Locknut, Fiber, M5 x 0.8
	––	177913	1	Wiring Harness (18H, 20H) (See Note D & G)
	––	542190390	1	Wiring Harness-20H (See Note K)	104	177066	2	Boot, Rubber – Battery
	86	139156	1	Stop Switch Assembly (8KM)	105	177068	2	Boot, Rubber – Cable (14KC Only)
	—	139196	1	Stop Switch Assembly (9W)	—	177066	1	Boot, Rubber – Cable (18H, 20H)
	—	177021	1	Stop Switch Assembly (11R, 13H)				Items Not Shown On Figure 2:
	—	196019	1	Stop Switch Assembly (13.5R)
	—	177022	1	Stop Switch Assembly (14KC)	—	167104	1	Guard, Muffler (Optional: 14KM, 16KM)
	—	177612	1	Stop Switch Assembly (14KCR)	--	------	1	Regulator (18H, 20H) (Honda P/N 31620-ZG5-003)
	—	177023	1	Stop Switch Assembly (14KM)
	—	167727	1	Stop Switch Assembly (16BV, 18BV)	--	166890	2	Capscrew, Hex Hd, M6 x 1.0 x 30mm **
					--	020762	2	Washer, Flat, ¼” SAE**
	87	041317	1	Switch, Push-Button	--	139745	2	Locknut, Fiber, M6 x 1.0 **
								** Use To Attach Regulator (18H, 20H)

Figure 2 Notes:

A)See Engine Distributor For Item 1B (Element) For The Following Models: 8KM, 9W, 10Y, 11R, 13H, 13.5R, 14KM, 14KCR, 14KC, 16KM, 16BV, 18BV.

C)These Items (Marked with a C) Effective from First Unit Production (S/N 167250) To Approx. February, 2000).

D)These Items (Marked with a D) Effective Spring (Approx. February, 2000).

F)Ignition Switch P/N 163830 must be used with P/N 177283 Wiring Harness. Ignition Switch P/N 177920 must be used with P/N 177913 Wiring Harness. When both items are serviced together it is suggested that the 177920 / 177913 part combination be used because the push-on wire connectors are easier to assemble.

G)Wiring Harness P/N 177913 can be identified by the RED stripe near the “engine end” of the harness. P/N 177283 does not have a colored stripe.

H)For Item 45A, P/N 195127 Hinge (1/4” Thick) use P/N 195120 Front Guard Weldment, 18” or P/N 195134 Front Guard Weldment, 20” and M8 attaching hardware (Items 46A, 47A & 48A). For Item 45, P/N 139075 Hinge (1/8” Thick) use P/N 139228 Front Guard Weldment, 18” or P/N 174672 Front Guard Weldment, 20” and M6 attaching hardware (Items 46, 47 & 48).

J)Engine model changed for saws mfg. After 15November2002. P/N 177461 Engine has a 1.00” dia. Crankshaft and requires P/N 167889 pulley (1.00” I.D.). Effective about 15November2002 with saw serial number 383022; units mfg. using P/N 190334 Engine and requires P/N 167942 pulley (1.125” I.D.). P/N’s 177461 & 190334 Engines (w/ Engine Mounted Fuel Tanks) Not Available as of April 2003. P/N 190092 Engine & Fuel Tank Group (See Figure 4) is the only replacement for a complete older style engine.

K)Wiring Harness P/N 542190390 can be identified by a BLUE stripe at one end, & is used only with Engine P/N 190092.

L)PAC IV-20H Eff. S/N 422140 (Built about 10/11/2004): Eliminated P/N 167992 Spacer. Belt Changed to 161499 (3VX355).

15