Humminbird PLATINUM ID PORTABLE User Manual

5 (1)
Humminbird PLATINUM ID PORTABLE User Manual

HUMMINBIRD PLATINUM ID PORTABLE OPERATIONS MANUAL

The Portable Case

Please read these important tips and keep them for future reference.

Your Platinum ID Portable Case is molded of a high-impact material that will provide years of operation and still maintain its good appearance. To clean the case, use a mild soap, liquid detergent, or household cleaners (such as Fantastic or Formula 409). Do not use an abrasive cleaner (such as Comet) or chemical cleaners (such as paint thinner or Acetone) as these will damage the finish.

As with any electronic instrument, never leave your Platinum ID Portable on the dash or rear deck area of a car or truck.

Periodically check the brass terminal strips located in both battery compartments of the lower case. Deposits or oxidation can cause a faulty power connection and interfere with the performance of your unit. Gently wiping the strips occasionally with fine steel wool will ensure good connection. Never attempt to remove the strips from the case, as doing so will damage them.

Case Setup

The only tool needed to complete the installation of the Platinum ID Portable is a phillips head screwdriver.

Your new Platinum ID Portable case incorporates the Humminbird All-in-One Mounting and Connector system, where all cable connections are a part of the mounting bracket.

Follow these simple steps to attach the cables to the bracket:

Open the portable case cover to its highest position and gently pull the cover toward the front of the unit to release it from the lower case. Grasp the top rear of the mounting bracket and pull toward you, to its full vertical position.

Loading...
+ 4 hidden pages