Humminbird Matrix 37, Matrix 20, Matrix 12, Matrix 17, Matrix 27 User Manual 2

5 (1)

www..reelschel matic..com

Operations Manual

531369-1_A

Matrix 12

Matrix 10

Matrix 17

Matrix 20

Matrix 37

Matrix 27

wwwThank You!..reelschel matic..com

Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. For complete details, see the separate warranty card included with your unit. We encourage you to read this operations manual carefully in order to get full benefit from all the features and applications of your Humminbird® product.

Contact our Customer Resource Center at either 1-334-687-0503 or visit our website at www.humminbird.com.

WARNING! This device should not be used as a navigational aid to prevent collision, grounding, boat damage, or personal injury. When the boat is moving, water depth may change too quickly to allow time for you to react. Always operate the boat at very slow speeds if you suspect shallow water or submerged objects.

WARNING! Disassembly and repair of this electronic unit should only be performed by authorized service personnel. Any modification of the serial number or attempt to repair the original equipment or accessories by unauthorized individuals will void the warranty. Handling and/or opening this unit may result in exposure to lead, in the form of solder.

WARNING! This product contains lead, a chemical known to the state of California to cause cancer, birth defects and other reproductive harm.

NOTE: All screens and graphics used in this manual are based on the 320V x 320H display size of the Matrix 17; however, this information is applicable to the models which have 240V x 160H, 240V x 240H and 640V x 320H displays also.

Humminbird®, DualBeam PLUS™, QuadraBeamTM, SmartCastTM, Selective Fish ID+TM, WhiteLine®, RTS®, X-PressTM Menu, Fish ID+TM, Structure ID®, TrueArchTM, UltraBlackTM, Angler Profile PresetsTM, and WeatherSenseTM are trademarked by or registered trademarks of Techsonic Industries, Inc.

© 2004 Techsonic Industries, Eufaula AL, USA. All rights reserved.

Table of Contents

 

How Sonar Works

1

Single Beam Sonar......................................................................................................................

2

DualBeam PLUS™ Sonar ............................................................................................................

2

QuadraBeamTM Sonar ................................................................................................................

2

What’s On the Display

3

Views

5

Sonar View ..................................................................................................................................

5

Understanding Sonar History ..................................................................................................

6

Real Time Sonar (RTS®) Window..............................................................................................

7

Sonar Zoom View ......................................................................................................................

8

200/83 kHz Split Sonar View (DualBeam PLUS™ and QuadraBeamTM Only) ..................

9

Big Digits View ..........................................................................................................................

10

Side Beam View (QuadraBeamTM Only)..................................................................................

11

Bottom Presentation ................................................................................................................

12

Key Functions

14

POWER/LIGHT Key ..................................................................................................................

14

VIEW Key ..................................................................................................................................

14

MENU Key ..................................................................................................................................

15

4-WAY Cursor Control Key ......................................................................................................

15

EXIT Key ....................................................................................................................................

16

Accessory Bus

17

Powering Up the Unit

17

The Menu System

18

Start-Up Options Menu

20

Normal Operation ....................................................................................................................

20

Simulator ..................................................................................................................................

21

System Status ..........................................................................................................................

22

PC Connect (with PC Connect Cable Only)............................................................................

22

i

ii

wwwTable of Cont..reelschelnts

matic..com

 

Sonar X-Press™ Menu

 

23

Sensitivity ..................................................................................................................................

 

23

Upper Range (Advanced: Sonar, Split Sonar and Big Digits Views Only) ......................

24

Lower Range ............................................................................................................................

 

25

Chart Speed ..............................................................................................................................

 

26

Bottom View..............................................................................................................................

 

26

Zoom Level (Sonar Zoom View Only) ....................................................................................

 

27

Sonar Menu Tab

 

28

Beam Select (DualBeam PLUS™ and QuadraBeamTM Only) ..............................................

29

Fish ID+TM....................................................................................................................................

 

30

Fish Sensitivity ..........................................................................................................................

 

31

Real Time Sonar (RTS®) Window ............................................................................................

 

31

83 kHz Sensitivity (Advanced: DualBeam PLUS™ and QuadraBeamTM Only) ................

32

455 kHz Balance (Advanced: QuadraBeamTM Only) ............................................................

32

Depth Lines (Advanced) ..........................................................................................................

 

33

Surface Clutter (Advanced) ....................................................................................................

 

34

Noise Filter (Advanced)............................................................................................................

 

35

Max Depth (Advanced)............................................................................................................

 

35

Water Type (Advanced) ..........................................................................................................

 

36

Transducer Select (QuadraBeamTM Only)..............................................................................

 

36

Alarms Menu Tab

 

37

Depth Alarm ..............................................................................................................................

 

37

Fish ID Alarm..............................................................................................................................

 

37

Low Battery Alarm....................................................................................................................

 

38

Alarm Tone ................................................................................................................................

 

38

Setup Menu Tab

 

39

Units - Depth ............................................................................................................................

 

40

Units - Temp (International Only)..........................................................................................

 

40

Units - Distance (with Temp/Speed or GPS Receiver)........................................................

40

Units - Speed (with Temp/Speed or GPS Receiver) ............................................................

41

User Mode ..................................................................................................................................

 

41

Language (International Only)................................................................................................

 

41

Triplog Reset (with Temp/Speed or GPS Receiver) ............................................................

42

Table of Contents

 

Restore Defaults........................................................................................................................

42

Select Views (Advanced) ........................................................................................................

43

Select Readouts (Advanced, Sonar View Only) ..................................................................

44

Depth Offset (Advanced) ........................................................................................................

46

Temp Offset (Advanced)..........................................................................................................

46

Speed Calibration (Advanced, with Temp/Speed Only) ....................................................

47

NMEA Output (Advanced) ......................................................................................................

47

Accessories Menu Tab

48

Troubleshooting

49

Matrix Doesn’t Power Up........................................................................................................

49

Matrix Defaults to Simulator with a Transducer Attached ..............................................

49

Display Problems......................................................................................................................

50

Finding the Cause of Noise......................................................................................................

51

Matrix Fishing System Accessories

52

Specifications

54

Contact Humminbird

55

NOTE: Entries in this Table of Contents which list (DualBeam PLUS™ and QuadraBeamTM Only) are only available on products sold with a DualBeam PLUS™ or QuadraBeamTM transducer.

NOTE: Entries in this Table of Contents which list (International Only) are only available on products sold outside of the US and Canada by our authorized International Distributors. To obtain a list of authorized International Distributors, please visit our website at www.humminbird.com or contact our Customer Resource Center at 1-334-687-0503 to locate the distributor nearest you.

NOTE: Entries in this Table of Contents which list (with Temp/Speed or GPS Receiver, or (with PC Connect Cable Only) require the purchase of separate accessories. You can visit our website at www.humminbird.com to order these accessories online or contact our Customer Resource Center at 1-334-687-0503.

iii

iv

wwwHow Sonar..reelschelWorks matic..com

Sonar technology is based on sound waves. The Matrix Fishing System uses sonar to locate and define structure, bottom contour and composition, as well as depth directly below the transducer.

Your Matrix Fishing System sends a sound wave signal and determines distance by measuring the time between the transmission of the sound wave and when the sound wave is reflected off of an object; it then uses the reflected signal to interpret location, size, and composition of an object.

Sonar is very fast. A sound wave can travel from the surface to a depth of 240 ft (70 m) and back again in less than ¹⁄ of a second. It is unlikely that your boat can "outrun" this sonar signal.

Your Matrix Fishing System will either have Single Beam, DualBeam PLUS™ or QuadraBeam™ sonar. Find the correct sonar description that applies to your unit.

Single Beam Sonar

Your Matrix 10, 12 or 20 uses a 200 kHz single beam sonar system with a 20° area of coverage. Depth capability is affected by such factors as boat speed, wave action, bottom hardness, water conditions and transducer installation.

DualBeam PLUS™ Sonar

Your Matrix 17 or 27 uses a 200/83 kHz DualBeam PLUS™ sonar system with a wide (60°) area of coverage. DualBeam PLUS™ sonar returns can be blended together, viewed separately or compared side-by-side. DualBeam PLUS™ is ideal for a wide range of conditions - from shallow to very deep water in both fresh and salt water. Depth capability is affected by such factors as boat speed, wave action, bottom hardness, water conditions and transducer installation.

QuadraBeam™ Sonar

Your Matrix 37 Fishing System uses QuadraBeamTM sonar. QuadraBeamTM sonar provides an extremely wide 90° area of coverage. QuadraBeamTM starts with two 45° 455 kHz beams for a continuous 90° of uninterrupted side to side coverage to 160 feet. These Side Structure locating beams reveal fish and structure to the left and right of your boat near the bottom. For structure directly below your boat, QuadraBeamTM uses DualBeamPLUS™ technology.

1

2

Humminbird Matrix 37, Matrix 20, Matrix 12, Matrix 17, Matrix 27 User Manual 2

wwwWhat’s On..reelschelthe Disp ay matic..com

The Matrix Fishing System can display a variety of useful information about the area

under and adjacent to your boat, including the following items:

Depth - water

 

 

 

 

when the water

 

 

 

Temperature - water surface temperature.

Bait Ball

 

 

 

 

Hard Bottom

 

 

 

 

Rocky Bottom

 

 

 

Second Sonar Return - when the sonar

signal bounces between the bottom and the

surface of the water and back again. Use the

appearance

of

the

second

return

to determine bottom hardness. Hard

bottoms will show a strong second return,

while soft bottoms

 

 

Cursor Dialog Box -

one or none at all.

 

 

directly below the cursor

83 kHz, Wide Beam Hollow Fish Symbol (DualBeam PLUS™ Units Only)

200 kHz, Narrow Beam Shaded Fish Symbol

Window

NOTE: Entries in this view that list (with Temp/Speed or GPS Receiver) are available if either

device is connected to the Matrix Fishing System. If both devices are connected, then only the

information from the GPS receiver will be displayed on the view.

 

3

4

www..reelschelViews matic..com

The views available on your Matrix Fishing System are:

Sonar View

Zoom View

200/83 kHz Split Sonar View (DualBeam PLUS™ and QuadraBeamTM Only)

Big Digits View

Side Beam View (QuadraBeamTM Only).

Sonar View is the default view. When the VIEW key is pressed, the display cycles through the available views. When the EXIT key is pressed, the display cycles through the available views in reverse order. Any view can be hidden or displayed as part of the view rotation using Select View from the Advanced Setup Menu.

NOTE: When you change any menu settings that affect the sonar, the view will update immediately (i.e. you don’t have to exit the menu to apply the change to the screen). For instance, by switching between "Inverse" and "Structure ID®" from the X-PressTM Menu it is possible to quickly alternate between the two viewing methods.

Sonar View

Sonar View presents a historical log of sonar returns. Depth is always displayed. Readouts for temperature and speed are automatically displayed if the appropriate accessory is connected. The most recent sonar returns are charted on the right side of the window; as new information is received, the older information is moved across the display to the left. A Digital Depth Readout is displayed in the upper left corner. A scale with Upper and Lower Depth Range readouts appears along the right edge of the Sonar View. The scale indicates the distance from the surface of the water to a depth range sufficient to show the bottom. Depth Range is automatically selected to keep the bottom visible on the display, although you can adjust it manually as well (see Sonar X-PressTM Menu). Either five or six additional Digital Readouts (depending on your model) display information from optional-purchase accessories. These information boxes can be customized to show only the information desired (see Setup Menu Tab, Select Readouts).

Sonar View

Depth

 

 

 

 

 

 

 

Upper Depth

 

 

 

 

 

 

 

 

 

 

 

 

 

Range

 

 

 

 

 

 

 

 

Temperature

 

 

 

 

 

 

 

RTS® Window

 

 

 

 

 

 

 

Triplog

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cursor

 

 

 

 

 

 

 

Sonar History

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Window

 

 

 

 

 

 

 

 

Cursor Dialog Box

Lower Depth

Range

NOTE: If the Depth number is flashing, it means that the unit is having trouble locating the bottom. This usually happens if the water is too deep, the transducer is out of the water, the boat is moving too fast, or for any other reason that the unit can’t accurately receive continuous data.

Freeze Frame - Pressing any arrow on the 4-WAY Cursor Control key will freeze the screen in the Sonar View and a cursor will be displayed on the screen. The cursor can be positioned on the display using the 4-WAY Cursor Control key to determine the depth of any sonar return. The RTS® Window continues to update in Freeze Frame. In addition, see the effects of menu setting changes with Instant Image Update. Pressing EXIT will exit Freeze Frame and the display will start to scroll. Freeze Frame is only available in the Sonar View.

Understanding Sonar History

It is important to understand the significance of the Matrix Fishing System display. The display does NOT show a literal 3-dimensional representation of what is under the water. Each vertical band of data received by the control head and plotted on the display represents something that was detected by a sonar return at a particular time. As both the boat and the targets (fish) may be moving, the returns are only showing a particular segment of time when objects were detected, not exactly where those objects are in relation to other objects shown on the display.

5

6

wwwReal Time..reelschelSonar (RTS®) Windowmatic..com

A Real Time Sonar (RTS®) Window appears on the right side of the display in the Sonar View only. The RTS® Window always updates at the fastest rate possible for depth conditions and shows only the returns from the bottom, structure and fish that are within the transducer beam. The RTS® Window plots the depth and intensity of a sonar return (see Sonar Menu - RTS® Window).

The Narrow RTS® Window indicates the sonar intensity through the use of grayscale. The grayscale used matches the bottom view grayscale setting used in the sonar history window (i.e. Inverse, StructureID®, WhiteLine®, Bottom Black). The depth of the sonar return is indicated by the vertical placement of the return on the display depth scale.

The Wide RTS® Window indicates the sonar intensity through the use of a bar graph. The length of the plotted return provides an indication of whether the return is weak or strong. The depth of the sonar return is indicated by the vertical placement of the return on the display depth scale. The Wide RTS® Window does not make use of grayscale.

Sonar Zoom View

Sonar Zoom View increases the displayed resolution to separate sonar returns that are very close together, such as those caused by fish suspended close to the bottom or within structure. In Zoom View, the display is split to show a narrow slice of the full range view on the right and the zoomed view on the left. The full range view on the right also contains the Zoom Preview Box that shows what part of the full range view is shown in zoom view on the left; the Zoom Preview Box tracks the bottom in the full range view.

As the depth changes, the zoomed view updates automatically to display a magnified image of the bottom. The Zoom Preview Box shows where the zoomed view is in relation to the full range view. The Zoom Level, or magnification, is displayed in the lower left corner and can be changed to suit conditions (see Sonar X-PressTM Menu: Zoom Level). Upper and Lower Zoom Depth Range numbers indicate the depth of the water which is being viewed.

Digital depth is displayed in the upper left hand corner. The digital readouts in the Sonar Zoom View cannot be customized; therefore, information such as water temperature and voltage are unavailable in the Sonar Zoom View.

 

 

 

 

 

Sonar Zoom View

 

 

 

 

 

 

 

 

 

Upper Depth Range,

 

 

 

 

 

 

Depth

 

 

 

 

 

 

 

 

Full Range View

 

 

 

 

 

 

 

 

 

 

 

 

Upper Depth Range,

 

 

 

 

 

 

 

 

 

Zoom View

 

 

 

 

 

 

 

 

 

Full Range View

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Zoom

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Preview Box

Zoomed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

View

 

 

 

 

 

 

Zoom Level

 

 

 

 

 

 

 

Lower Depth Range,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Full Range View

 

 

 

 

 

Lower Depth

 

 

 

 

 

Range, Zoom View

7

8

.

m

.com

www200/83 kHz.reelschelSplit Sonar View

atic.

(DualBeam PLUS™ and QuadraBeamTM Only)

Split Sonar View displays sonar returns from the 83 kHz wide beam on the left side of the screen and displays sonar returns from the 200 kHz narrow beam on the right side of the screen. Depth is always displayed in the upper left hand corner. You can use the Split Sonar View to make side by side comparisons between the sonar returns from the 83 kHz wide beam and the 200 kHz narrow beam.

The digital readouts in the Split Sonar View cannot be customized; therefore, information such as water temperature and voltage are unavailable in the Split Sonar View.

200/83 kHz Split Sonar View

Depth

 

 

 

Upper

 

 

 

 

 

 

Depth Range

 

 

 

 

 

 

 

83 kHz

 

 

 

 

Sonar History

 

 

 

 

 

Lower

 

 

 

 

 

Window

 

 

 

Depth Range

 

 

 

200 kHz

 

 

 

Sonar History Window

Big Digits View

Big Digits View provides digital data in a large, easy-to-see format. Depth is always displayed. Readouts for temperature, speed and Triplog information are displayed automatically if the appropriate accessory is connected to the system. The Triplog shows distance traveled, average speed, and time elapsed since the Triplog was last reset. The digital readouts in the Big Digits View cannot be customized.

Big Digits View

Depth

Temperature

Speed

Timer shows the time elapsed since Triplog was last reset

Distance is the distance traveled since the Triplog was last reset

Voltage - the battery voltage.

Average Speed shows the speed since the Triplog was last reset

9

10

wwwSide Beam..reelschelVi w matic..com

(QuadraBeamTM Only)

Side Beam View shows sonar information from both the left and right 90° 455 kHz beams and the 200 kHz down-looking beam in one view. The top portion of the display presents a historical log of sonar returns from the 200 kHz down-looking sonar. The bottom portion of the display presents a historical log of sonar returns from the 455 kHz rightand left-looking sonar. New information appears at the top, and scrolls down the display in the 455 kHz Windows. The sonar information from the side-looking beams reveal bottom contour, structure and fish similar to the down-looking beam, but the area covered is to the left and right of the area shown in the down-looking portion so you actually see more of the bottom. The distance covered by the right and left 90° beams is based on the depth setting for the down-looking beam, up to a maximum of 160 feet.

Side Beam View

Depth

200 kHz Sonar

History Window

Temperature

Left Side 455 kHz

 

 

 

Right Side 455 kHz

 

 

 

Sonar History

 

 

 

Sonar History

Window

 

 

 

Window

Water Surface Line for 455 kHz

Sonar History Windows

The digital readouts in the Side Beam View cannot be customized.

Bottom Presentation

As the boat moves, the unit charts the changes in depth on the display to create a profile of the Bottom Contour. The type of bottom can be determined from the return charted on the display. A Hard Bottom such as compacted sediment or flat rock appears as a thinner line across the display. A Soft Bottom such as mud or sand appears as a thicker line across the display. Rocky Bottoms have a broken, random appearance.

Bottom Contour Profile with RTS® Window.

Temp/Speed Accessory is optional.

Hard Bottom

Soft Bottom

Rocky Bottom

The sonar returns from the bottom, structure and fish can be represented as either

Inverse (default), WhiteLine®, Structure ID®, or Bottom Black. See Sonar X-PressTM

Menu: Bottom View for details on how to set the bottom view.

11

12

www..reelschel Inverse is a methodaticwhere weak..coreturnsmare shown with dark pixels and strong returns with lighter pixels. This has the benefit of ensuring that weak signals will be clearly visible on the display.

Structure ID® represents weak returns as light pixels and strong returns as dark pixels. This has the benefit of ensuring that strong returns will be clearly visible on the display.

WhiteLine® highlights the strongest sonar returns in white, resulting in a distinctive outline. This has the benefit of clearly defining the bottom on the display.

Bottom Black displays all pixels below the bottom contour as black, regardless of signal strength. This has the benefit of providing a high contrast between the bottom and other sonar returns on the display. Any targets such as fish, structure and thermoclines will be shown using the Structure ID® method.

Key Functions

Your Matrix Fishing System user interface consists of a set of easy-to-use keys that work with various on-screen views and menus to give you flexibility and control over your fishing experience.

POWER/LIGHT Key

The POWER/LIGHT key is used to turn the Matrix Fishing System on and off, and also to adjust the backlight and contrast of the display.

Press the POWER/LIGHT key to turn the unit on. The Title screen is then displayed until the Fishing System begins sonar operation.

Your Fishing System will start up with the backlight on and will automatically turn it off to conserve power. To turn the backlight on for night fishing, or to adjust the display contrast, press the POWER/LIGHT key to access the Light and Contrast menu. Use

the 4-WAY Cursor key to select Light or Contrast and then use the LEFT or RIGHT Cursor key to change the settings. Press EXIT to exit the Light and Contrast menu.

Press and hold the POWER/LIGHT key for 3 seconds to turn the unit off. A message will appear telling you how many seconds there are until shutdown occurs. Your Fishing System should always be turned off using the POWER/LIGHT key. This will ensure that shutdown occurs properly and any menu settings will be saved.

VIEW Key

The VIEW key is used to cycle through all available views. Press the VIEW key to advance to the next view. Repeatedly pressing VIEW cycles through all views available. Views can be hidden to optimize the system to your fishing requirements (see Setup Menu Tab: Select Views, Advanced).

13

14

Loading...
+ 21 hidden pages