Size:
168.73 Kb
Download

4

 

 

 

 

 

 

 

 

 

 

 

 

300 Series™ In-DashMounting Kit

531483-1_D

 

Returning Your Unit for Service

Before sending your unit in for repair, please contact the factory, either by phone or by email, to obtain a Repair Authorization Number for your unit.

NOTE: Please do not return your Humminbird® to the store for service.

Please have your product model name and serial number available before calling the factory. If you contact the factory by e-mail,please include your product model name and serial number in thee-mail,and use Request for Repair Authorization Number for youre-mailsubject header. You should include your Repair Authorization Number in all subsequent communications about your unit.

For IN-WARRANTYservice, complete the following steps:

Obtain a Repair Authorizat ion Number from the Humminbird ® Customer Resource Center.

Tag product with your name, street address, phone number and your assigned Repair Authorization Number.

Contact Humminbird®

Contact the Humminbird® Customer Resource Center in any of the following ways:

By Telephone

(Monday - Friday 8:00 a.m. to 4:30 p.m. Central Standard Time):

1-800-633-1468

By e-mail

(typically we respond to your e-mailwithin three business days):

cservice@johnsonoutdoors.com

For direct shipping, our address is:

Humminbird

Service Department

678 Humminbird Lane

• Include a brief written description of the problem.

Eufaula, AL 36027 USA

Include a copy of your receipt (to show pro of and date of purchase).

Return product freight prepaid to Humminbird®, using an insured carrier with delivery confirmation.

For OUT-OF-WARRANTYservice,complete the following steps:

Obtain a Repair Authorizat ion Number from the Humminbird ® Customer Resource Center.

Include payment in the form of credit card number and expiration date, money order or personal check. Please do not send cash.

Tag product with your name, street address, phone number and your assigned Repair Authorization Number.

Include a brief written description of the problem.

Return product freight prepaid to Humminbird®, using an insured carrier with delivery confirmation.

© 2009 Humminbird®, Eufaula AL, USA.

All rights reserved.

1

 

 

 

 

 

 

 

 

 

 

 

 

300 Series™ In-DashMounting Kit

531483-1_D

 

Thank You

Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality,thoroughly reliable marine equipment. Genuine Humminbird® accessories offer the opportunity to upgrade and expand the capabilities of your Humminbird® product.

Your Humminbird® is designed for trouble-freeuse in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after theone-yearperiod . For complete details, see the Warranty section included in this manual.

Contact our Customer Resource Center at 1-800-633-1468 or visit our web site atwww.humminbird.com.

Installation Overview

Following are instructions for the recessed installation of the 300 SeriesTM control head into a hole in the dash. Before you start installing the 300 SeriesTM control head, we encourage you to read these instructions carefully in order to get the full benefit from your Humminbird® accessory.

If you find that any items are missing from your installation kit, call our Customer Resource Center at

1-800-633-1468or visit our web site at www.humminbird.com.

In addition to the hardware supplied with your In-DashMounting Kit, you will need a reciprocating saw for cutting the dash material and masking tape to hold the mounting template in place.

In-DashMounting

To in-dashmount the 300 Series™ control head, start by placing the components on the surfaces where you intend to install them before installation. Make sure that the surfaces you have chosen provide adequate protection from wave shock, and that all cables can reach the control head.

NOTE: If a cable is too short for your application, extension cables are available. Call Humminbird®

Customer Support at 1-800-633-1468for more information.

1.Locate a suitable, flat area of the dash to mount the control head. The control head requires a depth of at least 3 inches (76 mm).

2.Tape the paper In-DashMounting template to the desiredin-dashmounting location.

3.At a location inside the dotted line on the template, drill a hole large enough to insert the blade of the reciprocating saw. Carefully begin cutting toward the dotted line, then follow the dotted line around the template. Remove the template when finished.

© 2009 Humminbird®, Eufaula AL, USA.

All rights reserved.

2

300 Series™ In-DashMounting Kit

4.Insert and tighten the two threaded rods into the two threaded inserts located on the back side of the control head. Peel off the adhesive-backedfoam pad and place it on the back of the control head.

5.Insert the control head through the mounting hole from the front side of the dash. From the back side of the dash, align the two threaded rods on the rear of the housing with the two holes on each in-dashmounting bracket. Place a lock washer onto each threaded rod, then secure brackets by placing a hex nut onto each threaded rod and tighten fully.

NOTE: Brackets will tend to rotate out when nuts are tightened. This is normal, but it is important not to overtighten nuts.

6.Insert cable connectors into the proper recesses on the cable collector. The cable connectors are keyed to prevent reverse installation, so be careful not to force the connectors into the wrong slots.

7.While holding cables in place in the cable collector, place retainer over cables and screw in place using the two Phillips screws provided.

Assembling the Cable Connector

8.Place the cable collector assembly into the back of the control head. Cable connectors and cable sockets are keyed to prevent reverse installation, so be careful not to force the connectors into the wrong sockets.

NOTE: It is very important that the cable collector is used and secured in place in the In-Dashinstallation.

531483-1_D

Applying the Foam Pad

Assembling the Bracket

Assembled In-DashView

© 2009 Humminbird®, Eufaula AL, USA.

All rights reserved.

3

 

 

 

 

 

 

 

 

 

 

 

 

300 Series™ In-DashMounting Kit

531483-1_D

 

1-YearLimited Warranty

We warra nt the ori ginal retail purchaser that prod uct s made by Humminbird® have been manufactured free from defects in materials and workmanship. This warranty is effective for one year from the date of original retail purchase. Humminbird® products found to be defective and covered by this warranty will be replaced or repaired free of charge at Humminbird® option and returned to the customer freight prepaid. Humminbird® sole responsibility under this warranty is limited to the repair or replacement of a product that has been deemed defective by Humminbird®. Humminbird® is not responsible for charges connected with the removal of such product or reinstal lation of replaced or repaired parts.

This warranty does not apply to a product that has been:

Improperly installed;

Used in an installation other than that recomm ended in the product installation and operation instructions;

Damag ed or has failed because of an acciden t or abnormal operation;

Repaired or modified by entities other than Humminbird®.

Please retain your original receipt as a proof of the purchase date. This will be required for in-warrantyservice.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, OBLIGATIONS OR LIABILITIES ON THE PART OF HUMMINBIRD® AND WILL BE THE CUSTOMER'S EXCLUSIVE REMEDY, EXCEPT FOR ANY APPLICABLE IMPLIED WARRANTIES UNDER STATE LAW WHICH ARE HEREBY LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE. IN NO EVENT WILL HUMMINBIRD® BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EX PRES S OR IM PLIED WARRAN TY RELA TIN G TO THE PRODUCTS.

Some states do not allow limitations on an implied warranty, or the exclusion of incid ent al or cons equen tial damages, so the above exclusions may not apply to you. You may also have other rights, which vary from state to state.

Humminbird® Service Policy

Even though you'll probably never need to take advantag e of our incredible service policy, it's good to know that we back our products this confidently. We do it because you deserve the best. We will make every effort to repair your unit within three business days from the receipt of your unit at our factory. This does not include shipping time to and from our factory. Units received on Friday are typically shipped by the following Wednesday, units received Monday are typically shipped by Thursday, etc.

All repair work is performed by factory-trainedtechnicians to meet exacting factory specifications.Factory-servicedunits go through the sam e rig orous tes ting and quality control inspections as ne w production units.

After the original warranty period, a standard flat rate service charge will be assessed for each repair (physical damage and missing parts are not included). Any repairs made after the original warranty will be warranted for an additional 90 days after service has been performed by our factory technicians. You can contact our Customer Resource Center or visit our web site to verify the flat rate repair fee for your product (visit the Product Support section):

http://www.humminbird.com

We reser ve the righ t to dee m any pro duct uns ervicea ble when replacement parts are no longer available or impossible to obtain. This Service Policy is valid in the United States only. This applies only to Humminbird® products returned to our factory in Eufaula, Alabama. This Service Policy is subject to change without notice.

DOMESTIC (USA) CUSTOMERS:

PLEASE DO NOT RETURN THIS PRODUCT TO STORE FOR SERVICE

For all technical issues please call 1-800-633-1468 or visitwww.humminbird.com, clickSUPPORT.

Please reference product serial number and model number when contacting Humminbird®.

© 2009 Humminbird®, Eufaula AL, USA.

All rights reserved.