HTC IMAGIO WHIT100, Imagio User Manual

3.69 Mb

Exchanging Messages  81

Customizing email settings

To change the download size and format for Outlook email

1.Disconnect your phone from the computer.

2.Tap Start > All Applications > ActiveSync.

3.Tap Menu > Options, select E-mail, then tap Settings.

4.On the E-mailSync Options screen:

Under Message format, select HTML or Plain Text. HTML is only available when connected to Microsoft Exchange Server 2007 or later.

Under Download size limit, select the desired email size.

5.Close ActiveSync and reconnect your phone to the computer.

To change the download size and format for Internet email

1.Tap Menu > Options on the Account Picker screen, or tapMenu > Tools > Options while you’re in a message list.

2.Tap your POP3 or IMAP4 Internet email account.

3.Tap Download Size Settings.

4.Under Message format, select HTML or Plain Text.

5.Under Download size limit, select the desired email size.

6.Tap Done.

To automatically receive attachments on Outlook email messages

1.Tap Start > All Applications > ActiveSync.

2.Tap Menu > Options.

3.Tap E-mail> Settings, and then select Include file attachments.

To automatically receive attachments on IMAP4 email messages

1.Tap Menu > Options on the Account Picker screen, or tapMenu > Tools > Options while you’re in a message list.

2.Tap the name of your IMAP4 email account.

3.Tap Download Size Settings.

4.In Download attachments:

Select All attachments to always download file attachments; or

Select a file size limit for auto-downloadingattachments.

5.Tap Done.

To store attachments on the storage card

1.Tap Start > All Applications > Email.

2.Tap Menu > Options > Storagetab.

3.Select the When available, use this storage card to store attachments check box.

82  Exchanging Messages

Chapter 7 

Working With Company Email and Meeting Appointments

7.1  Synchronizing with the Exchange Server

To keep up-to-datewith your company email messages and meeting schedules while you’re out of the office, you can connect your phone to the Internet throughWi-Fior a data connection and synchronize with your company’s Exchange Server.

Setting up an Exchange Server connection

Before you can synchronize or access information on the Exchange Server, you need to set up an Exchange Server connection on your phone. You need to get the Exchange Server name (must be Outlook Web Access server name), domain name, user name, and the password that you use at work from your network administrator and enter them on your phone.

Note You can set up an Outlook email account that synchronizes with the Exchange Server from the Home screen Email tab using Mail Setup. See “Email” in Chapter 3 for details.

If you have not synchronized your phone with your computer, follow these steps to set up an Exchange Server connection.

1.Tap Start > All Applications > Email > SetupE-mail.

2.Enter the E-mail address andPassword for the email account and select theSave password option. TapNext.

3.Clear the Try to gete-mailsettings automatically from the Internetoption and tap Next.

4.In Youre-mailprovider, select Exchange serverand tap Next.

5.Tap Next again.

6.Select the Attempt to detect Exchange Server Settings automaticallyoption and tap Next.

7.Enter the Domain name and tapNext.

8.In Server address, enter the Exchange Server address and tapNext.

9.Select the items that you want to sync with the Exchange Server.

Tips • To change synchronization settings of an information item, for example,E-mail,select the item, then tap


To change the rules for resolving synchronization conflicts, tap Menu > Advanced.

10.Tap Finish.

Notes •

If you synchronized email messages with your computer before, open ActiveSync on your phone, then tap Menu


> Add Server Source to set up an Exchange Server connection. When prompted to select information types for


synchronization, you must first clear the E-mail check box under the Windows PC item before you can select


E mail under Exchange Server.

To change Exchange Server settings, open ActiveSync on your phone, and then tap Menu > Configure Server.

Starting synchronization

Before you start synchronizing with the Exchange Server, make sure your phone has been set up with a Wi Fi or data connection to the Internet so that you can synchronize over the air. For more information about connections, see Chapter 8.

After you finish setting up an Exchange Server connection, your phone automatically starts synchronization. To manually start synchronization, tap Start > Settings, and then touchSync Data.

Note If you connect your phone to your office computer via a USB or Bluetooth connection, you can use this connection to the computer to “pass through” to the network and download Outlook email messages and other information to your phone.

84  Working With Company Email and Meeting Appointments

7.2  Working With Company Email Messages

Your phone gives you instant access to your company email messages and lets you manage your messages easier. Direct Push, Fetch Mail, Remote email search, and email flags are just some of the tools you can use to manage your email messages.

Note Some messaging features depend on the Microsoft Exchange Server version used in your company. Check with your network administrator for the availability of these features.

Automatic synchronization through Direct Push

Direct Push technology (push email feature) enables you to receive new email messages on your phone as soon as they arrive in your Inbox on the Exchange Server. Items such as contacts, calendar and tasks are also

immediately updated onto your phone when these items have been changed or new entries have been added on the Exchange Server. To make Direct Push work, you need to have a Wi-Fior data connection on your phone.

You need to perform a full synchronization between your phone and the Exchange Server before Direct Push can be enabled.

Requirement The Direct Push feature works for your phone only if your company is using Microsoft Exchange Server 2003 Service Pack 2 (SP2) with Exchange ActiveSync or later.

To turn on Direct Push in Comm Manager

1.Tap Start > Settings, and then touch Communications.

Tip You can also tap Start > All Applications > Comm Manager.

2.On the Comm Manager screen, touch the OFF/ON slider at the right side of the Microsoft Direct Push item.

To turn on Direct Push in ActiveSync

1.Tap Start > All Applications > ActiveSyncand then tap Menu > Schedule.

2.Select As items arrivein the Peak timesand Off-peaktimesboxes.

Note When Direct Push is off, you need to manually retrieve your email messages.

Scheduled synchronization

If you do not want to use Direct Push, you can set a regular schedule for synchronizing Outlook email and information.

1.In ActiveSync on your phone, tap Menu > Schedule.

2.Select from the available options to set the synchronization schedule.

Tip You can select a shorter interval in the Peak times box and a longer interval in theOff-peaktimes box, so that your email messages are synchronized more frequently when you are working. To set the days and hours that make up your peak andoff-peaktimes, tap thepeak times link at the bottom of the screen.

Instant download through Fetch Mail

The Fetch Mail feature downloads an entire email immediately without the need for you to perform a full Send/ Receive action. This limits the download to just the email message that you want and helps save data cost.

Requirement Fetch Mail works for your phone only if your company is using Microsoft Exchange Server 2007 or later.

1.Tap Start > All Applications > Email > OutlookE-mail.

2.Open an email message.

3.By default, only the first few words of the message are shown. To download the whole email, fingerscroll to the end of the message, then tap Get the rest of this message.

4.Wait for the remainder of the message body to download.

Notes • For information about changing email sync options such as setting the download size for email, see "Customizing email settings" in Chapter 6.

When you receive an email that contains a link to a document such as a PDF or Microsoft Office document located on SharePoint or an internal file server, you can tap the link to view the document on your phone. You can view the document only if you have a Microsoft Outlook account that synchronizes with Microsoft Exchange Server 2007 or later. Exchange Server must also be set up to allow access to SharePoint document libraries or internal file servers.

Working With Company Email and Meeting Appointments  85

Searching for email messages on the Exchange Server

You can access email messages that are not available on your phone by searching your Microsoft Exchange Server mailbox. The search results are downloaded and displayed in a Search Results folder.

Requirement Your company must be using Microsoft Exchange Server 2007 or later.

1.Tap Start > All Applications > Email > OutlookE-mail.

2.Tap Menu > Tools > Search Server.

3.In the Look for text box, enter the search keyword.

4.Choose the date range of messages to search from.

5.In the Look in list, specify whether to search in theInbox,Sent Items, orAll Folders, and then tap


Tip To clear the search results and return to the message list, tapMenu > Clear Results.

Flagging your messages

Flags serve as a reminder for you to follow-upon important issues or requests contained in email messages. Flagging messages, which has been a useful feature on desktop OutlookE-mail,can also be done in Outlook Mobile on your phone. You can flag received email messages on your phone.

Requirement Flags are enabled only if email messages are synchronized with Microsoft Exchange Server 2007 or later. Flags are disabled or hidden if email messages are synchronized with earlier versions of Microsoft Exchange Server.

To flag or unflag a message

1.Tap Start > All Applications > Email > OutlookE-mail.

2.Select a message.

3.Tap Menu > Follow Up and select one of the following options:

Set Flag Mark the message with a red flag to remind yourself to follow it up.

Complete Flag Mark the message with a check mark to indicate that the issue or request in the email is already completed.

Clear Flag Remove the flag to unmark the message.

Note Email message reminders are displayed on your phone if the messages are flagged with reminders and synchronized from the Exchange Server.


Outlook Mobile allows you to retrieve and change your out-of-officestatus. Just like desktop Outlook, Outlook Mobile automatically sends anauto-replymessage when you’re not available.

To send out-of-officeauto-replymessages

1.Tap Start > All Applications > Email > OutlookE-mail.

2.Tap Menu > Tools > Out of Office.

3.In the I am currentlylist, select Out of the Office.

4.Enter your auto-replymessage, and then tapDone.

86  Working With Company Email and Meeting Appointments

7.3  Managing Meeting Requests

When you schedule and send meeting requests from your phone, you can invite attendees to your meeting and check their availability.

When you receive a meeting request, you can reply by accepting or declining the request. The meeting request also clearly indicates whether or not there are conflicting or adjacent meetings.

Requirement Your company must be using Microsoft Exchange Server 2007 or later.

To reply to a meeting request

1.When you receive a meeting request email, a notification is displayed on your phone. Open the email.

2.Tap Accept to reply and accept the meeting request, or tapMenu > Decline if you cannot attend the meeting.

Tips • Before responding, you can check your availability during the time of the requested meeting by tapping

View your calendar.

If the time of the meeting conflicts with your other appointments, a “Scheduling Conflict” status appears on top of the email.

3.Choose whether or not to edit your response email before sending, then tap OK.

If you accept the meeting request, it is automatically added as an appointment in Calendar on your phone.

7.4  Finding Contacts in the Company Directory

In addition to having contacts on your phone, you can access contact information from your organization’s Company Directory. By having over-the-airaccess to the Company Directory, you can easily send email messages and meeting requests to anyone in your company.

Requirement Access to the Company Directory is available only if your organization is runningMicrosoft Exchange Server 2003 SP2 or higher, and you have completed your first synchronization with the Exchange Server.

When browsing Contacts, composing email, or creating a meeting request

1.Synchronize with the Exchange Server.

2.Do any of the following:

While browsing through your contacts on the Contacts or Phone screen, tap Menu > Company Directory.

In a new email message, tap the To box (or tapMenu > Add Recipient), and then tapCompany Directory on the top of the list.

When creating a meeting request and selecting required and optional attendees in Calendar, tap

Company Directory.

3.Enter a partial or full contact name and tap Search. In the search results list, tap a contact to select it.

4.You can save a contact from the Company Directory to your phone by selecting the contact, and then tapping Menu > Save to Contacts.

Note You can search for the following information as long as that information is included in the Company Directory: First name, Last name,E-mailname, Display name,E-mailaddress, or Office location.

When viewing a received Outlook email message

1.Open a received Outlook email message.

2.If a Search button () appears to the right of the sender name in the email message, tap this button to search for the sender in the Company Directory.

3.If the sender is found, the contact details will be displayed. You can then choose to save the sender to your contacts, call the sender, and more.

Chapter 8 


8.1  Ways of Connecting to the Internet

Your phone’s networking capabilities allow you to access the Internet or your corporate network through Wi-Fi,dial-up,or GPRS/3G (GSM/UMTS only). You can also add and set up a VPN or proxy connection.


Wi-Fiprovides wireless Internet access over distances of up to 100 meters (300 feet). To useWi-Fion your phone, you need access to a wireless access point or “hotspot”.

Note The availability and range of your phone’sWi-Fisignal depends on the number, infrastructure, and other objects through which the signal passes.

To turn Wi-Fion and connect to aWi-Finetwork

1.Tap Start > Settings, and then tap Communications.

2.Tap Wi-Fi.Detected wireless networks are displayed on the screen.

3.Tap the desired Wi-Finetwork.

If you selected an open (unsecured) network, you are automatically connected to the network.

If you selected a secured network, enter the security key and then tap Done. You are then connected to the network.

4.Tap Back to return to the Communications screen.

Next time you use your phone to detect Wi-Finetworks, you will not be prompted to enter the network key of the previously accessedWi-Finetwork (unless you perform a hard reset which will erase custom settings on your phone).

Indicates that your phone is connected to this Wi-Finetwork

Signal strength

Indicates a secured Wi-Finetwork.

Network name (SSID)

Notes • Wi-Finetworks areself-discoverable,which means no additional steps are required for your phone to connect to aWi-Finetwork. It may be necessary to provide a username and password for certain closed wireless networks.

To turn offWi-Fi,on the Communications screen, tap the OFF/ON slider at the right side of theWi-Fi item.

88  Internet

To check Wi-Finetwork status

Aside from the Wi-Fistatus icon on the title bar, you can check the currentWi-Ficonnection status from any of the following screens of your phone:

Wireless LAN screen

Tap Advanced on theWi-Fiscreen.

On the Main tab, you will see theWi-Finetwork that your phone is currently connected to. The configuration and signal quality of the Wi Fi network are also shown.

Configure Wireless Networks screen

Tap Start > Settings > All Settings > Connections >Wi-Fiand then tap the Wireless Networksbutton. This screen displays all available Wi-Fi networks in range.

To connect to a Wi-Finetwork in the list, tap and hold on the desired network, and then tapConnect.

Tap a Wi-Finetwork in the list to view or change its connection settings. You can also add newWi-Finetworks, if available, by tappingAdd New.

To save battery power while connected to a Wi-Finetwork

Using Wi-Fiquickly consumes battery power. Turn offWi-Fiwhen not in use. You can also enable power saving settings while usingWi-Fi.

1.Tap Start > Settings, and then tap Menu > Wireless Networks > Power Modetab.

2.Move the Power Save Mode slider to a position that optimizes performance with the least power consumption.

For example, move the slider to the left (Best Performance) to have the optimal wireless network performance; move to the right (Best Battery) to obtain the maximum battery usage.

Internet  89


Your phone’s networking capability allows you to access the Internet through the dial-upconnection. Settings for connecting to the Verizon 1xRTT/EVDO network are already preconfigured on your phone, and your phone is ready to connect to the Internet. Please do not change these settings as this may cause your data connection to stop working.

If you need to use another dial-upconnection from an ISP (Internet Service Provider), you can manually add it to your phone. To establish adial-upconnection on your phone, you need the same settings that you normally use when you dial up from your computer. This includes the ISP server phone number, your user name and password.

1.On the Home screen, slide to the Settings tab and then tapAll Settings > Connections.

2.Tap Connections.

3.Under Verizon Wireless, tap Add a new modem connection.

4.On the Make New Connection screen, enter a name for the connection and select Cellular Line in the

Select a modem list, then tap Next.

5.Enter the ISP server phone number, then tap Next.

6.Enter your user name, password, and any other information required by your ISP, then tap Finish.


If you are going to roam internationally, you can use GPRS/3G (orEDGE, if available) via thepre-installedGSM SIM card to connect to the Internet and to send and receive email on your phone. Contact Verizon to find out about GPRS/3G rates.

Your phone is ready to use Verizon GPRS/3G services. Do not change the connection settings as this may cause the GPRS/3G services to stop working. If you need to add another GPRS/3G connection on your phone, contact Verizon.

Data connection icons

The following icons may appear in the title bar when the phone is in Global or GSM mode:

GPRS available

EDGE available

HSPA available

WCDMA/UMTS available

Data connection present

Starting a data connection

After setting up a data connection on your phone, you can now connect your phone to the Internet. The connection is automatically started when you begin using a program that accesses the Internet such as Opera Mobile.

To manually start a data connection

If you have set up multiple types of data connections on your phone, you can manually start a connection.

1.Tap Start > Settings, and then tap All Settings > Connections.

2.Tap Connections.

3.Tap Manage existing connections.

4.Tap and hold the name of the desired connection, and then tap Connect.

To disconnect active data connections

1.On the Home screen, slide to the Settings tab, and then tapCommunications.

2.Tap the OFF/ON slider at the right side of the Data Connection item.

90  Internet

8.2  Using Opera Mobile™

Opera Mobile™ is afull-featuredInternet browser, optimized for use on your phone.

To open Opera Mobile and go to a website

1.On the Home screen, slide to the Browser tab and then tapLaunch Browser.

2.On the Opera Mobile screen, tap the address bar.

Note If the address bar is hidden (the browser is in full screen mode), tapat thebottom-rightcorner of the screen.

3.Enter the URL address and tap .

The browser screen















1Refresh the web page being viewed.

2Enter the URL of the web site here.

3Return to the previous web page viewed.

4Go to the Bookmarks screen where you can add, edit, or send bookmarks.

5Add a new browsing tab or switch to another browsing tab.

6Go to the home page.

7Open a list where you can change Opera Mobile settings. See “Opera Mobile menu” in this chapter for details.

8Close the current tab. This is enabled only if you have more than one tab opened.

9When browsing the web, Opera Mobile automatically switches to full screen mode. Tap to show the address and Menu bars again.

Internet 91

Opera Mobile menu

On the menu bar, tap to open the menu.

Open the Settings screen where you can set your home page, change display settings, set privacy settings, and more.

View items being downloaded, and resume or stop current downloads.

View information about the web

page you are browsing.

See web pages that you have viewed.

Manage and view web pages that you have saved.

Open the Opera Mobile help file.

Close Opera Mobile completely.

Note For more information about using Opera Mobile, go to:

Navigating web pages

To pan on the web page

While browsing web pages, use finger gestures to pan on the web page.

Tip Touch and hold an empty area on a web page to open a shortcut menu that lets you go back to the previous page, reload the page, add the page as a Favorite, and more. You can also tap and hold a link or image on a web page to open a menu with different options.

92  Internet

To zoom in and out on web pages

While viewing a web page in full screen, slide to the right of the zoom bar to zoom in on the web page. To zoom out, slide your finger to the left.

Tip You can also tap the screen twice to zoom in. To zoom out, tap the screen twice again.

Zooming in

To change the screen orientation

Change the screen orientation by simply turning your phone sideways.

Zooming out

Internet  93

8.3  Using YouTube™

YouTube™ lets you browse, search, and watch Internet videos that are posted in YouTube.

Note You need an active data orWi-Ficonnection to use YouTube. If you are using a data connection, watching Internet videos may significantly increase your data connection costs.

To open YouTube

Tap Start > All Applications > YouTube.

Open the Program Guide.

Displays the current program channel being viewed.

Displays the available videos for the selected program channel. Tap a video to watch it. Tap to view details about the video.

Set the quality of downloaded videos and site (country) preference.

Close YouTube.

Filter the list by type of video (Featured, Most Viewed, Top Favorited, or Top Rated) and by the time period when videos were uploaded to the YouTube server.

Switch between the

YouTube screens.

Searching videos

1.On the YouTube screen, tap .

2.On the Search screen, enter the video information, and then tapSearch. YouTube searches for the video, and then displays all related videos on the screen.

3.Tap on a video to watch it. See “Watching videos” for details.

94  Internet

Using the Program Guide

The Program Guide categorizes videos into channels so you can browse and watch related videos available on YouTube. You can also add your favorite video channel in the Program Guide.

To add a new channel

1.Search the channel or video you want to add to the Program Guide. See “Searching videos” for details.

2.In the search results list, tap at the right side of the video or channel to open the details screen.

3.Tap, and then tapOK on the confirmation screen. The channel you just subscribed to is shown when you tap

Program Guide.

Tip You can also add a search result as a program channel.

To change the program channel

1.On the Videos screen, tapProgram Guide at the top of the screen.

2.On the Program Guide, select a channel.

Tip You can scroll down to view more channels.

The video list refreshes to display the available videos for the selected channel.

To delete a program channel

You can only delete channels that you have added to the Program Guide.

1.Tap Program Guide.

2.Scroll down to the channel that you want to delete, and then tap .

3.On the confirmation screen, tap Yes.

Watching videos

Tap a video on any YouTube screen, program guide channel, or search results list to launch the YouTube Video Player.

Drag to go forward or










backward in the video.










Download progress
































Go back to the beginning









Buffered video


















of the video.









Depending on the quality












of downloaded videos you






















selected, tap to view the












video in its actual size, in












expanded size, or in full





Play/pause the video.




















Stop the


video playback.












Tip To adjust the volume, press the VOLUME UP and VOLUME DOWN buttons on the left panel of the phone.

Internet  95

When you tap Stop ( ) or finish watching the entire video, you can select from the following options.

Go back to the previous page of related videos.

Send the link of the previously watched video via email, or to send the video thumbnail via MMS.

Go to the next page of related videos.

If no action is taken, the next page

is automatically displayed after 10 seconds.

View information about the video you just watched.

Add the video to

Replay the video.

your Bookmarks.



You can save your favorite videos in Bookmarks for quick access.

To save a video in Bookmarks

After watching a video, tap . You can also tapon any video that you want to add to Bookmarks and then tapon the video details screen.

To watch videos in Bookmarks

On the YouTube screen, tap . Tap a video to watch it.

To delete a video from Bookmarks

1.On the Bookmarks screen, tapEdit.

2.Tap on the video you want to remove.

3.On the confirmation screen, tap Yes.

4.Tap Done.


View recently watched videos on the History screen. On the YouTube screen, tap and then tap a video to watch it.

Note To clear the History list, tapClear.

96  Internet

8.4  Using Streaming Media

Streaming Media lets you stream live broadcasts oron-demandmedia content from the web. The media is sent in a continuous stream to your phone and is played as it arrives, along with the audio.

The Streaming Media program allows you to play 3GP andMPEG-4 files. It also supports playback ofSDP (Session Description Protocol) files.

To access streaming content via Opera Mobile

In Opera Mobile, you can open a web page containing RTSP (Real Time Streaming Protocol) links to streaming media content then play the content in the Streaming Media program.

1.On the Home screen, slide to the Browser tab and tapLaunch Browser.

2.In the address bar, enter the URL address of the web page that contains the RTSP link to the desired *.3gp, *.mp4, or *.sdp file.

3.On the web page, tap the RTSP link.

4.Streaming Media then automatically opens and starts playing the file. During playback, use the slider and button controls to play/pause, switch to full screen, replay, and fast forward.

Tap to toggle between playing or pausing the video playback.

Play video from the beginning.

Switch to full screen mode. In full screen mode, tap to switch back.

Drag the slider to go backward or forward on the video.

View the video in its actual size, in expanded size, or in full screen.

Stop playback.

To stream media files directly on the Streaming Media Player

Streaming Media only supports RTSP links when you stream *.3gp and *.mp4 files directly on the program.

1.Tap Start > All Applications > Streaming Media.

2.Tap Menu > Connect.

3.Enter the complete RTSP link, and then tap Connect. Streaming Media starts playing the file.

4.During playback, use the slider and playback control buttons to play/pause, switch to full screen, replay, and fast forward.

To view streaming video information

While streaming a video clip, tap Menu > Properties to view the video properties such as the video link or location, duration, and bit rate.

To configure streaming video connection settings

Tap Menu > Options to configure the Streaming Media settings. From this screen, you can set the media buffer, select the connection to use, and set all streaming videos to play in full screen.

Internet  97

8.5  Using RSS Hub

RSS Hub is an RSS reader that keeps youup-to-datewith the latest news from the Internet. It monitors RSS feeds from your favorite news sites, blogs and more, and downloads the most current updates and podcasts.

For more information about RSS Hub, tap Start > All Applications > Help, and then tapHelp for Added Programs > RSS Hub.

Subscribing to and organizing news channels

You must subscribe to news channels before you can receive RSS feeds.

To subscribe to news channels

1.Tap Start > All Applications > RSS Hub, and then tap Continue.

2.In the New Channel Wizard screen, select the Choose from a list of known Channels option, and then tapNext. A list of RSS channels is displayed.

Note If the RSS channel you want to subscribe to is not in the list of known channels, tapBack, then select another option on the New Channel Wizard screen.

Tap to load pre-selectedRSS channels.

3. Select the check boxes of the RSS channels you want to subscribe to, then tapFinish.



Tip Channels are grouped by categories. If you want to select all channels in a category, select the category check box.

98  Internet

4. The channel list appears. TapRefresh to update the channels.

Select the channel category to display

Channel list






Channel is







updated. Tap



















to view the
















































































































Update the



Cancel channel
























































To add new channels

1.In the channel list, tap Menu > Channel > New to open the New Channel Wizard screen.

2.Select an option, and then follow screen instructions to add new channels.

To filter the channels to display

In the channel list, tap Menu > View, and then selectUpdated to display only those channels with unread items, orAll to display all subscribed channels.

Using the headline list

Tap a channel in the channel list to display the headline list.

The item contains a keyword.

Tap a headline to open the news summary screen.

New or unread item

Item has been read

Return to the channel list

Play back the podcast or view the image.

Podcast or image attachment is downloading.

Download the podcast or image attachment.

New or unread items display in bold and are marked with a blue newspaper icon. Items that have been read are marked with a gray newspaper icon.

Viewing the news summary

Tap a headline in the headline list to display the news summary.

Channel name

Headline and read status

News summary

Open the complete article in Opera Mobile. See “Using Opera Mobile” in this chapter for details.

Internet  99

Podcast or image attachment.

Tap the link to download the file.

Return to the headline list

Tap Menu to change the way that text is displayed, save a podcast, send a link to the article via email, and more.

To download, play, or save podcasts

1.On the news summary screen tap the Download audio/Download video link or the audio/video podcast icon.

Tip To cancel the file download, tapCancel download below the audio/video file icon.

2.After downloading the file, do one of the following:

Tap Play audio/Play video or the audio/video file icon to play back the file.

Tap Menu > Podcast > Save to save a copy of the file to the phone’s main memory or storage card.

To send the a link to the article via email

1.In the news summary screen, tap Menu > Send Link via Email.

2.Messaging opens and displays the Account Picker screen. Tap the email account that you want to use. A new email message is then created with the link.

3.Specify the email recipients, and then tap Send.

Note For more information on how to compose email messages, see “Creating and sending an email message” in Chapter 6.

To view the next or previous news summary

In the news summary screen, tap Menu > Next orMenu > Previous.

100  Internet

8.6  Using Your Phone As a Modem (Modem Link)

While traveling, you can use your Windows Mobile powered phone as a modem for your notebook. Use either VZAccess Manager or theModem Link program to use your phone as a USB or Bluetooth modem.

Before you proceed

Make sure your phone has a data or dial-upmodem connection. For more information about setting up these connections, see “Wireless data connection” and“Dial-up”in this chapter.

To connect your phone to a computer via USB, you must first install Windows Mobile Device Center or Microsoft ActiveSync version 4.5 or later on the computer.

To use a Bluetooth connection, make sure your computer has built-inBluetooth capability. If your computer does not have Bluetooth, you can connect and use a Bluetooth dongle.

Using VZAccess Manager

The following instructions describe how to install VZAccess® Manager on a computer that uses Microsoft® Windows® so that your wireless phone can be used as a tethered modem.

To install VZAccess Manager

1.Insert the VZAccess Manager installation CD that came with your phone into the CD drive on your computer.

2.Complete the on-screeninstructions.

Note For technical support, please go to Also, to download the latest version of VZAccess Manager, please go to

To connect to BroadbandAccess

1.On your computer, click Start > All Applications > VZAccess Manager.

2.Follow the initial WWAN Setup Wizard to detect the phone (action needs to be performed only once for each phone).

3.Select Verizon Wireless - VZAccess connection from the available connection list.

4.Click the Connect WWAN button.

5.Once connected, the Connect WWAN button will change to Disconnect WWAN. Click this button to end your connection session.

Note For optimum performance, the wireless device should be at least 12 inches from your notebook while operating in tethered mode.

Setting up your phone as a USB modem in Windows Vista® or Windows XP

To set up the phone as a USB modem, you must first install the modem driver on your computer and then activate your phone as a USB modem.

To install the wireless modem driver on the computer

1.Insert the Getting Started Disc into your CD drive. Select your language, click Additional Tools, and then clickWireless Modem Driver Installation.

2.Follow the on-screeninstructions to install the USB modem driver. When installation completes, clickExit to close the installation program.

To activate your phone as a USB modem

Connect your phone to your notebook using the USB cable, then follow the steps below to activate your phone as a USB modem.

Note When you activate Wireless Modem, ActiveSync and Windows Mobile Device Center will be disabled automatically.

1.On your phone, tap Start > All Applications > Modem Link.

2.Under PC Connection Type, select USB.

3.Tap Menu > Start.