LASERJET ENTERPRISE 700 COLOR MFP
Repair Manual
M775dn |
M775f |
M775z |
M775z+ |
HP LaserJet Enterprise 700 color MFP M775
Repair Manual
Copyright and License
© 2012 Copyright Hewlett-Packard
Development Company, L.P.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Part number: CC522-90967
Edition 1, 10/2012
Trademark Credits
Microsoft®, Windows®, Windows® XP, and Windows Vista® are U.S. registered trademarks of Microsoft Corporation.
Conventions used in this guide
TIP: Tips provide helpful hints or shortcuts.
NOTE: Notes provide important information to explain a concept or to complete a task.
CAUTION: Cautions indicate procedures that you should follow to avoid losing data or damaging the product.
WARNING! Warnings alert you to specific procedures that you should follow to avoid personal injury, catastrophic loss of data, or extensive damage to the product.
ENWW |
iii |
iv |
Conventions used in this guide |
ENWW |
Table of contents
1 Removal and replacement ................................................................................................ |
1 |
Removal and replacement strategy ............................................................................................. |
2 |
Cautions during removal and replacement ................................................................... |
2 |
Required tools ........................................................................................................... |
3 |
Types of screws ........................................................................................................ |
3 |
Service approach ...................................................................................................... |
3 |
Before performing service .......................................................................................... |
4 |
After performing service ............................................................................................. |
4 |
Parts removal order ................................................................................................... |
4 |
Control-panel assembly ............................................................................................................. |
5 |
Intermediate transfer belt ........................................................................................................... |
7 |
Fuser ...................................................................................................................................... |
9 |
Formatter PCA ....................................................................................................................... |
10 |
Hard disk drive (HDD) ............................................................................................................ |
11 |
Reinstall the HDD .................................................................................................... |
12 |
Secondary transfer roller ......................................................................................................... |
13 |
Document feeder mylar strips ................................................................................................... |
14 |
Install replacement document feeder mylar strips ......................................................... |
15 |
Document feeder foam reflector ............................................................................................... |
16 |
Install a replacement document feeder foam reflector ................................................... |
17 |
Pickup, feed, and separation (rollers and pads) ......................................................................... |
22 |
Tray 1 (multipurpose tray) pickup roller ...................................................................... |
22 |
Tray 1 separation pad ............................................................................................. |
24 |
Tray 2 pickup roller ................................................................................................. |
26 |
Tray 2 separation roller ........................................................................................... |
27 |
1 x 500 or 3 x 500 pickup, feed, and separation rollers ............................................. |
29 |
High capacity input feeder pickup, feed, and separation rollers .................................... |
30 |
Document feeder pickup and feed roller assembly ....................................................... |
32 |
Document feeder separation pad .............................................................................. |
34 |
Reinstall the document feeder separation pad .............................................. |
35 |
Covers, doors, and whole unit replacement ............................................................................... |
36 |
Document feeder front cover ..................................................................................... |
36 |
ENWW |
v |
Document feeder hatch cover ................................................................................... |
41 |
Document feeder input tray bottom cover ................................................................... |
42 |
Document feeder roller cover .................................................................................... |
43 |
Remove the document feeder roller cover .................................................... |
43 |
Document feeder rear cover ..................................................................................... |
46 |
Remove the document feeder rear cover ...................................................... |
46 |
Scanner left cover ................................................................................................... |
49 |
Remove the scanner left cover .................................................................... |
49 |
Scanner right cover ................................................................................................. |
51 |
Remove the scanner right cover .................................................................. |
51 |
Scanner front cover ................................................................................................. |
53 |
Remove the scanner front cover .................................................................. |
53 |
Reinstall the scanner front cover ................................................................. |
55 |
Left cover ............................................................................................................... |
57 |
Rear cover ............................................................................................................. |
58 |
Right rear cover ...................................................................................................... |
59 |
Remove the right rear cover ....................................................................... |
59 |
Toner collection unit (TCU) access door ...................................................................... |
60 |
Remove the TCU access door ..................................................................... |
60 |
Right door assembly ................................................................................................ |
62 |
Remove the right door assembly ................................................................. |
62 |
Rear upper cover .................................................................................................... |
66 |
Right upper cover .................................................................................................... |
67 |
Scanner rear and FFC bezel cover ............................................................................ |
68 |
Stapler/stacker rear cover ........................................................................................ |
69 |
Document feeder ..................................................................................................... |
71 |
Remove the document feeder assembly ....................................................... |
71 |
Reinstall the document feeder ..................................................................... |
73 |
Scanner assembly ................................................................................................... |
74 |
Remove the scanner assembly .................................................................... |
74 |
Reinstall the scanner assembly ................................................................... |
77 |
Stapler/stacker assembly ......................................................................................... |
78 |
Remove the stapler/stacker assembly .......................................................... |
78 |
Left upper cover ...................................................................................................... |
82 |
Remove the left upper cover ....................................................................... |
82 |
Front upper cover .................................................................................................... |
83 |
Remove the front upper cover; stapler/stacker model .................................... |
83 |
Remove the front upper cover; non stapler/stacker model .............................. |
85 |
Front right cover ...................................................................................................... |
86 |
Remove the front right cover ...................................................................... |
86 |
Front door assembly ................................................................................................ |
88 |
vi |
ENWW |
Remove the front door assembly ................................................................. |
88 |
Top right cover ....................................................................................................... |
91 |
Remove the top right cover ........................................................................ |
91 |
Output cover; non stapler/stacker model .................................................................... |
93 |
Remove the output cover ........................................................................... |
93 |
Top cover ............................................................................................................... |
95 |
Remove the top cover ............................................................................... |
95 |
Top rear cover ........................................................................................................ |
97 |
Remove the top rear cover ......................................................................... |
97 |
Main assemblies .................................................................................................................. |
101 |
Document feeder paper present sensor .................................................................... |
101 |
Remove the document feeder paper present sensor ..................................... |
101 |
Document feeder hinge .......................................................................................... |
103 |
Remove the document hinge .................................................................... |
103 |
Document feeder width sensor, paper-long and paper-short sensors ............................. |
105 |
Remove the document feeder width sensor, paper-short and paper-long |
|
sensors ................................................................................................. |
105 |
Document feeder tray extender ............................................................................... |
108 |
Remove the document tray extender ......................................................... |
108 |
Sub-power supply assembly .................................................................................... |
110 |
Remove the power supply assembly .......................................................... |
110 |
Sub power supply fan FM5 .................................................................................... |
112 |
Remove the sub power supply fan FM5 ..................................................... |
112 |
Lifter-drive assembly .............................................................................................. |
115 |
Remove the lifter-drive assembly ............................................................... |
115 |
ITB front guide assembly ........................................................................................ |
118 |
Remove the ITB front guide assembly ........................................................ |
119 |
ITB rear guide assembly ......................................................................................... |
121 |
Remove the ITB rear guide assembly ......................................................... |
121 |
Residual toner full sensor ........................................................................................ |
122 |
Remove the residual toner full sensor ........................................................ |
122 |
Reinstall the residual toner full sensor ......................................... |
125 |
Residual toner feed assembly .................................................................................. |
127 |
Remove the residual toner feed assembly .................................................. |
128 |
Paper delivery assembly ........................................................................................ |
131 |
Remove the paper delivery assembly ........................................................ |
131 |
Laser scanner ....................................................................................................... |
133 |
Remove the laser/scanner assembly ......................................................... |
133 |
Cartridge fan FM4 ................................................................................................ |
137 |
Remove the cartridge fan FM4 ................................................................. |
137 |
Fuser fan FM2 ...................................................................................................... |
139 |
ENWW |
vii |
Remove the fuser fan FM2 ....................................................................... |
139 |
Formatter fan FM3 ................................................................................................ |
141 |
Remove the formatter fan FM3 ................................................................. |
141 |
ITB motor M1 ....................................................................................................... |
143 |
Remove the ITB motor M1 ....................................................................... |
143 |
Drum motor M2 .................................................................................................... |
145 |
Remove the drum motor M2 .................................................................... |
145 |
Developing motor M3 ............................................................................................ |
147 |
Remove the developing motor M3 ............................................................ |
147 |
Fuser motor M4 .................................................................................................... |
149 |
Remove the fuser motor M4 ..................................................................... |
149 |
Developing disengagement motor M6 ..................................................................... |
151 |
Remove the developing disengagement motor M6 ...................................... |
151 |
Power-supply fan FM1 ........................................................................................... |
153 |
Remove the power-supply fan FM1 ........................................................... |
153 |
Power switch ........................................................................................................ |
155 |
Remove the power switch ........................................................................ |
155 |
Environment sensor ................................................................................................ |
157 |
Scan control board (SCB) ....................................................................................... |
158 |
Remove the scan control board (SCB) ....................................................... |
158 |
Reinstall the SCB .................................................................................... |
160 |
Installing a replacement SCB and image scanner memory board ................. |
160 |
Document feeder open sensor and flag .................................................................... |
161 |
Remove the document open sensor and flag .............................................. |
161 |
Reinstall the document feeder open sensor and flag .................................... |
163 |
Image scanner memory board ................................................................................ |
164 |
Remove the image scanner memory board ................................................ |
164 |
Installing a replacement SCB and image scanner memory board ................. |
165 |
Fax PCA .............................................................................................................. |
166 |
Remove the fax PCA ............................................................................... |
166 |
Reinstall the fax PCA .............................................................................. |
167 |
Image (developing) high-voltage power supply (HVPS) ............................................... |
168 |
Remove the image (developing) high-voltage power supply ......................... |
168 |
Reinstall the image (developing) high-voltage power supply ......................... |
170 |
Interconnect PCA .................................................................................................. |
171 |
Remove the interconnect PCA .................................................................. |
171 |
DC controller PCA ................................................................................................. |
174 |
Remove the DC controller PCA ................................................................. |
174 |
Formatter cage ..................................................................................................... |
177 |
Remove the formatter cage ...................................................................... |
177 |
First-transfer high-voltage power supply .................................................................... |
179 |
viii |
ENWW |
Remove the first-transfer high-voltage power supply .................................... |
179 |
Reinstall the first-transfer high-voltage power supply .................................... |
181 |
Second-transfer high-voltage power supply and holder ............................................... |
182 |
Remove the second-transfer high-voltage power supply and holder ............... |
182 |
Driver PCA ........................................................................................................... |
184 |
Remove the driver PCA ........................................................................... |
184 |
Low-voltage power supply (LVPS) ............................................................................. |
186 |
Remove the LVPS .................................................................................... |
186 |
Duplex drive assembly ........................................................................................... |
190 |
Remove the duplex-drive assembly ........................................................... |
191 |
Reinstall the duplex-drive assembly ........................................................... |
193 |
Main drive assembly ............................................................................................. |
194 |
Remove the main drive assembly .............................................................. |
195 |
Install the main drive assembly ................................................................. |
202 |
Fuser drive assembly ............................................................................................. |
207 |
Remove the fuser drive assembly .............................................................. |
208 |
Install a replacement fuser drive assembly ................................................. |
211 |
Fuser gear assembly .............................................................................................. |
213 |
Remove the fuser gear assembly .............................................................. |
214 |
Install a replacement fuser gear assembly .................................................. |
218 |
Input devices ....................................................................................................................... |
220 |
1x500-sheet paper feeder assembly ........................................................................ |
220 |
1x500 rear cover ................................................................................... |
220 |
1x500 left cover .................................................................................... |
221 |
1x500 right-front cover ........................................................................... |
223 |
1x500 front-upper cover ......................................................................... |
224 |
Remove the 1x500 front-upper cover ......................................... |
224 |
1x500 right door ................................................................................... |
225 |
1x500 right-lower cover .......................................................................... |
227 |
Remove the 1x500 right-lower cover .......................................... |
227 |
1x500 pickup assembly .......................................................................... |
228 |
Remove the 1x500 pickup assembly .......................................... |
228 |
1x500 lifter-drive assembly ..................................................................... |
231 |
Remove the 1x500 lifter-drive assembly ..................................... |
231 |
1x500 pickup motor ............................................................................... |
233 |
Remove the 1x500 pickup motor ............................................... |
233 |
1x500 driver PCA .................................................................................. |
234 |
Remove the 1x500 driver PCA .................................................. |
234 |
1x500and 3x500-sheet paper deck (PD) ................................................................ |
235 |
PD rear cover ........................................................................................ |
235 |
PD left cover .......................................................................................... |
236 |
ENWW |
ix |
PD right front cover ................................................................................. |
238 |
PD front upper cover ............................................................................... |
239 |
Remove the PD front upper cover ............................................... |
239 |
PD front door ......................................................................................... |
241 |
PD storage box ...................................................................................... |
243 |
Remove the PD storage box ...................................................... |
243 |
Reinstall the PD storage box ..................................................... |
244 |
PD right door ......................................................................................... |
245 |
PD right lower cover ............................................................................... |
247 |
Remove the right lower cover .................................................... |
247 |
PD left lower cover ................................................................................. |
249 |
Remove the left lower cover ...................................................... |
249 |
PD rear lower cover ................................................................................ |
251 |
Remove the rear lower cover .................................................... |
251 |
PD front lower cover ............................................................................... |
252 |
Remove the front lower cover .................................................... |
252 |
PD pickup assembly cassette 1 ................................................................. |
253 |
Remove the pickup assembly cassette 1 ..................................... |
253 |
Reinstall the pickup assembly .................................................... |
255 |
PD pickup assembly cassette 2 ................................................................. |
256 |
Remove the pickup assembly cassette 2 ..................................... |
256 |
Reinstall the pickup assembly .................................................... |
257 |
PD pickup assembly cassette 3 ................................................................. |
258 |
Remove the pickup assembly cassette 3 ..................................... |
258 |
Reinstall the pickup assembly .................................................... |
259 |
PD lifter drive assembly ........................................................................... |
260 |
Remove the lifter drive assembly ................................................ |
260 |
PD pickup motor .................................................................................... |
262 |
Remove the pickup motor ......................................................... |
262 |
PD controller PCA ................................................................................... |
263 |
Remove the controller PCA ....................................................... |
263 |
High capacity input feeder ..................................................................................... |
265 |
HCI right tray ......................................................................................... |
265 |
HCI left tray ........................................................................................... |
266 |
HCI left cover ........................................................................................ |
267 |
Remove the HCI left cover ........................................................ |
267 |
HCI left lower cover ................................................................................ |
269 |
Remove the HCI left lower cover ................................................ |
269 |
HCI rear cover ....................................................................................... |
271 |
Remove the HCI rear cover ....................................................... |
271 |
HCI right door ....................................................................................... |
272 |
x |
ENWW |
HCI right front cover ............................................................................... |
274 |
Remove the HCI right front cover ............................................... |
274 |
HCI right center cover and right rear cover ................................................ |
275 |
Remove the HCI right center cover and right rear cover ................ |
275 |
HCI right lower cover ............................................................................. |
277 |
Remove the HCI right lower cover ............................................. |
277 |
HCI rear lower cover .............................................................................. |
279 |
Remove the HCI rear lower cover .............................................. |
279 |
HCI left tray lifter drive ............................................................................ |
280 |
Remove the HCI left tray lifter drive ............................................ |
280 |
Reinstall the HCI left tray lifter drive ........................................... |
281 |
HCI right tray lifter drive ......................................................................... |
282 |
Remove the HCI right tray lifter drive ......................................... |
282 |
Reinstall the HCI left tray lifter drive ........................................... |
283 |
HCI left tray pickup drive ........................................................................ |
284 |
Remove the HCI left tray pickup drive ........................................ |
284 |
Reinstall the HCI tray pickup drive ............................................. |
285 |
HCI right tray pickup drive ...................................................................... |
286 |
Remove the HCI right tray pickup drive ...................................... |
286 |
Reinstall the HCI tray pickup drive ............................................. |
287 |
HCI controller PCA ................................................................................. |
288 |
Remove the HCI controller PCA ................................................. |
288 |
HCI left tray automatic close assembly ...................................................... |
289 |
Remove the HCI left tray automatic close assembly ...................... |
289 |
HCI right tray automatic close assembly .................................................... |
291 |
Remove the HCI right tray automatic close assembly .................... |
291 |
HCI left tray pickup assembly ................................................................... |
293 |
Remove the HCI left tray pickup assembly .................................. |
293 |
Reinstall the HCI tray pickup assembly ....................................... |
294 |
HCI right tray pickup assembly ................................................................ |
295 |
Remove the HCI right tray pickup assembly ................................ |
295 |
HCI merge assembly .............................................................................. |
297 |
Remove the HCI merge assembly .............................................. |
297 |
Reinstall the HCI merge assembly .............................................. |
299 |
Output devices .................................................................................................................... |
300 |
Stapler/stacker ..................................................................................................... |
300 |
Stapler/stacker rear cover ....................................................................... |
300 |
Stapler/stacker front right cover ............................................................... |
302 |
Stapler/stacker front left cover ................................................................. |
303 |
Remove the stapler/stacker front left cover .................................. |
303 |
Stapler/stacker right door ....................................................................... |
304 |
ENWW |
xi |
Remove the stapler/stacker right door ........................................ |
304 |
Stapler/stacker left rear cover .................................................................. |
306 |
Remove the stapler/stacker left rear cover .................................. |
306 |
Stapler/stacker output bin assembly ......................................................... |
307 |
Remove the stapler/stacker output bin assembly .......................... |
307 |
Stapler/stacker left lower cover ................................................................ |
309 |
Remove the stapler/stacker left lower cover ................................ |
309 |
Stapler/stacker operation assembly .......................................................... |
310 |
Remove the stapler/stacker operation assembly .......................... |
310 |
Stapler/stacker feed guide assembly ........................................................ |
312 |
Remove the stapler/stacker feed guide assembly ......................... |
312 |
Stapler/stacker door switch ..................................................................... |
316 |
Remove the stapler/stacker door switch ..................................... |
316 |
Stapler/stacker inlet solenoid assembly ..................................................... |
318 |
Remove the stapler/stacker inlet solenoid assembly ..................... |
318 |
Stapler/stacker stapler assembly .............................................................. |
320 |
Remove the stapler/stacker stapler assembly .............................. |
320 |
Reinstall the stapler/stacker stapler assembly .............................. |
321 |
Stapler/stacker controller PCA ................................................................. |
322 |
Remove the stapler/stacker controller PCA ................................. |
322 |
2 Parts and diagrams ...................................................................................................... |
323 |
Order parts by authorized service providers ............................................................................ |
324 |
Order parts, accessories, and supplies .................................................................... |
324 |
Related documentation and software ....................................................................... |
324 |
Supplies part numbers ........................................................................................... |
325 |
Customer self-repair parts ....................................................................................... |
325 |
Service replacement parts ...................................................................................... |
327 |
Accessories .......................................................................................................... |
328 |
How to use the parts lists and diagrams .................................................................................. |
328 |
Assembly locations ............................................................................................................... |
330 |
Base product (no optional trays or accessories) ......................................................... |
330 |
Document feeder and scanner ................................................................................ |
331 |
Stapler/stacker ..................................................................................................... |
331 |
500-sheet paper feeder ......................................................................................... |
332 |
1x500-sheet paper deck ........................................................................................ |
333 |
3x500-sheet paper deck ........................................................................................ |
334 |
High capacity input (HCI) paper deck ...................................................................... |
335 |
Document feeder and scanner whole units ............................................................................... |
336 |
Document feeder assemblies .................................................................................................. |
338 |
Scanner assemblies .............................................................................................................. |
340 |
xii |
ENWW |
Scanner controller board (SCB) .............................................................................................. |
342 |
Stapler/stacker assembly ...................................................................................................... |
344 |
Stapler/stacker covers ........................................................................................... |
344 |
Stapler/stacker components ................................................................................... |
346 |
Covers ................................................................................................................................ |
348 |
Right door ........................................................................................................................... |
350 |
Internal assemblies ............................................................................................................... |
352 |
Internal assemblies (1 of 8) ..................................................................................... |
352 |
Internal assemblies (2 of 8) ..................................................................................... |
354 |
Internal assemblies (3 of 8) ..................................................................................... |
356 |
Internal assemblies (4 of 8) ..................................................................................... |
358 |
Internal assemblies (5 of 8) ..................................................................................... |
360 |
Internal assemblies (6 of 8) ..................................................................................... |
362 |
Internal assemblies (7 of 8) ..................................................................................... |
364 |
Internal assemblies (8 of 8) ..................................................................................... |
366 |
1x500-sheet paper feeder ..................................................................................................... |
368 |
1x500-sheet paper feeder covers ............................................................................ |
368 |
1x500-sheet paper feeder components .................................................................... |
370 |
1x500-sheet and 3x500-sheet paper deck .............................................................................. |
372 |
1x500-sheet and 3x500-sheet paper deck covers ..................................................... |
372 |
1x500-sheet paper deck components ...................................................................... |
374 |
3x500-sheet paper deck components ...................................................................... |
376 |
High capacity input (HCI) feeder ............................................................................................ |
378 |
HCI covers ........................................................................................................... |
378 |
HCI components (1 of 2) ........................................................................................ |
380 |
HCI components (2 of 2) ........................................................................................ |
382 |
Alphabetical parts list ........................................................................................................... |
384 |
Numerical parts list .............................................................................................................. |
401 |
Index ............................................................................................................................... |
419 |
ENWW |
xiii |
xiv |
ENWW |
List of tables
Table 2-1 Order parts, accessories, and supplies .................................................................................. |
324 |
Table 2-2 Related documentation and software .................................................................................... |
324 |
Table 2-3 Supplies part numbers ......................................................................................................... |
325 |
Table 2-4 Customer self-repair parts .................................................................................................... |
325 |
Table 2-5 Base product (no optional trays or accessories) ...................................................................... |
330 |
Table 2-6 Document feeder and scanner .............................................................................................. |
331 |
Table 2-7 500-sheet paper feeder ....................................................................................................... |
332 |
Table 2-8 1x500-sheet paper deck ..................................................................................................... |
333 |
Table 2-9 3x500-sheet paper deck ..................................................................................................... |
334 |
Table 2-10 High capacity input (HCI) paper deck ................................................................................. |
335 |
Table 2-11 Document feeder and scanner whole units ........................................................................... |
337 |
Table 2-12 Document feeder assemblies .............................................................................................. |
339 |
Table 2-13 Scanner assemblies .......................................................................................................... |
341 |
Table 2-14 Scanner controller board (SCB) assembly ............................................................................ |
343 |
Table 2-15 Stapler/stacker covers ...................................................................................................... |
345 |
Table 2-16 Stapler/stacker components ............................................................................................... |
347 |
Table 2-17 Covers ............................................................................................................................ |
349 |
Table 2-18 Right door ....................................................................................................................... |
351 |
Table 2-19 Internal assemblies (1 of 8) ................................................................................................ |
353 |
Table 2-20 Internal assemblies (2 of 8) ................................................................................................ |
355 |
Table 2-21 Internal assemblies (3 of 8) ................................................................................................ |
357 |
Table 2-22 Internal assemblies (4 of 8) ................................................................................................ |
359 |
Table 2-23 Internal assemblies (5 of 8) ................................................................................................ |
361 |
Table 2-24 Internal assemblies (6 of 8) ................................................................................................ |
363 |
Table 2-25 Internal assemblies (7 of 8) ................................................................................................ |
365 |
Table 2-26 Internal assemblies (8 of 8) ................................................................................................ |
367 |
Table 2-27 1x500-sheet paper feeder covers ....................................................................................... |
369 |
Table 2-28 1x500-sheet paper feeder components ............................................................................... |
371 |
Table 2-29 1x500-sheet and 3x500-sheet paper deck covers ................................................................ |
373 |
Table 2-30 1x500-sheet paper deck components .................................................................................. |
375 |
Table 2-31 3x500-sheet paper deck components .................................................................................. |
377 |
Table 2-32 HCI covers ...................................................................................................................... |
379 |
ENWW |
xv |
Table 2-33 HCI components (1 of 2) ................................................................................................... |
381 |
Table 2-34 HCI components (2 of 2) ................................................................................................... |
383 |
Table 2-35 Alphabetical parts list ....................................................................................................... |
384 |
Table 2-36 Numerical parts list ........................................................................................................... |
401 |
xvi |
ENWW |
List of figures
Figure 1-1 Screwdrivers ......................................................................................................................... |
3 |
Figure 1-2 Remove the control-panel assembly (1 of 4) .............................................................................. |
5 |
Figure 1-3 Remove the control panel (2 of 4) ............................................................................................ |
5 |
Figure 1-4 Remove the control-panel assembly (3 of 4) .............................................................................. |
6 |
Figure 1-5 Remove the control-panel assembly (4 of 4) .............................................................................. |
6 |
Figure 1-6 Remove the ITB (1 of 3) .......................................................................................................... |
7 |
Figure 1-7 Remove the ITB (2 of 3) .......................................................................................................... |
7 |
Figure 1-8 Remove the ITB (3 of 3) .......................................................................................................... |
8 |
Figure 1-9 Remove the fuser (1 of 2) ....................................................................................................... |
9 |
Figure 1-10 Remove the fuser (2 of 2) ..................................................................................................... |
9 |
Figure 1-11 Remove the formatter PCA (1 of 2) ...................................................................................... |
10 |
Figure 1-12 Remove the Formatter PCA (2 of 2) ...................................................................................... |
10 |
Figure 1-13 Remove the HDD (1 of 2) ................................................................................................... |
11 |
Figure 1-14 Remove the HDD (2 of 2) ................................................................................................... |
11 |
Figure 1-15 HDD installed—correct ....................................................................................................... |
12 |
Figure 1-16 HDD installed—incorrect .................................................................................................... |
12 |
Figure 1-17 Remove the secondary transfer roller .................................................................................... |
13 |
Figure 1-18 Remove the secondary transfer roller .................................................................................... |
13 |
Figure 1-19 Remove the document feeder mylar strips (1 of 3) .................................................................. |
14 |
Figure 1-20 Remove the document feeder mylar strips (2 of 3) .................................................................. |
14 |
Figure 1-21 Remove the document feeder mylar strips (3 of 3) .................................................................. |
15 |
Figure 1-22 Remove the document feeder foam reflector (1 of 3) .............................................................. |
16 |
Figure 1-23 Remove the document feeder foam reflector (2 of 3) .............................................................. |
16 |
Figure 1-24 Remove the document feeder foam reflector (3 of 3) .............................................................. |
17 |
Figure 1-25 Install a replacement document feeder foam reflector (1 of 8) ................................................. |
17 |
Figure 1-26 Install a replacement document feeder foam reflector (2 of 8) ................................................. |
18 |
Figure 1-27 Install a replacement document feeder foam reflector (3 of 8) ................................................. |
18 |
Figure 1-28 Install a replacement document feeder foam reflector (4 of 8) ................................................. |
19 |
Figure 1-29 Install a replacement document feeder foam reflector (5 of 8) ................................................. |
19 |
Figure 1-30 Install a replacement document feeder foam reflector (6 of 6) ................................................. |
20 |
Figure 1-31 Install a replacement document feeder foam reflector (7 of 8) ................................................. |
20 |
Figure 1-32 Install a replacement document feeder foam reflector (8 of 8) ................................................. |
21 |
ENWW |
xvii |
Figure 1-33 Remove the Tray 1 pickup roller (1 of 2) .............................................................................. |
22 |
Figure 1-34 Remove the Tray 1 pickup roller (2 of 2) .............................................................................. |
23 |
Figure 1-35 Remove the Tray 1 separation pad (1 of 4) .......................................................................... |
24 |
Figure 1-36 Remove the Tray 1 separation pad (2 of 4) .......................................................................... |
24 |
Figure 1-37 Remove the Tray 1 separation pad (3 of 4) .......................................................................... |
25 |
Figure 1-38 Remove the Tray 1 separation pad (4 of 4) .......................................................................... |
25 |
Figure 1-39 Remove the Tray 2 pickup roller .......................................................................................... |
26 |
Figure 1-40 Remove the separation Tray 2 roller (1 of 2) ......................................................................... |
27 |
Figure 1-41 Remove the separation Tray 2 roller (2 of 2) ......................................................................... |
28 |
Figure 1-42 Remove the 1 x 500 or 3 x 500 rollers (1 of 2) .................................................................... |
29 |
Figure 1-43 Remove the 1 x 500 or 3 x 500 rollers (2 of 2) .................................................................... |
29 |
Figure 1-44 Remove the high capacity input feeder pickup, feed, and separation rollers (1 of 4) .................. |
30 |
Figure 1-45 Remove the high capacity input feeder pickup, feed, and separation rollers (2 of 4) .................. |
30 |
Figure 1-46 Remove the high capacity input feeder pickup, feed, and separation rollers (3 of 4) .................. |
31 |
Figure 1-47 Remove the high capacity input feeder pickup, feed, and separation rollers (4 of 4) .................. |
31 |
Figure 1-48 Remove the document feeder pickup and feed roller assemblies (1 of 3) .................................. |
32 |
Figure 1-49 Remove the document feeder pickup and feed roller assemblies (2 of 3) .................................. |
32 |
Figure 1-50 Remove the document feeder pickup and feed roller assemblies (3 of 3) .................................. |
33 |
Figure 1-51 Remove the document feeder separation pad (1 of 3) ............................................................ |
34 |
Figure 1-52 Remove the document feeder separation pad (2 of 3) ............................................................ |
34 |
Figure 1-53 Remove the document feeder separation pad (3 of 3) ............................................................ |
35 |
Figure 1-54 Reinstall the document feeder separation pad ....................................................................... |
35 |
Figure 1-55 Remove the document feeder front cover (1 of 8) ................................................................... |
36 |
Figure 1-56 Remove the document feeder front cover (2 of 8) ................................................................... |
37 |
Figure 1-57 Remove the document feeder front cover (3 of 8) ................................................................... |
37 |
Figure 1-58 Remove the document feeder front cover (4 of 8) ................................................................... |
38 |
Figure 1-59 Remove the document feeder front cover (5 of 8) ................................................................... |
38 |
Figure 1-60 Remove the document feeder front cover (6 of 8) ................................................................... |
39 |
Figure 1-61 Remove the document feeder front cover (7 of 8) ................................................................... |
39 |
Figure 1-62 Remove the document feeder front cover (8 of 8) ................................................................... |
40 |
Figure 1-63 Remove the document feeder hatch cover (1 of 2) ................................................................. |
41 |
Figure 1-64 Remove the document feeder hatch cover (2 of 2) ................................................................. |
41 |
Figure 1-65 Remove the document feeder input tray bottom cover ............................................................. |
42 |
Figure 1-66 Remove the document feeder roller cover (1 of 4) .................................................................. |
43 |
Figure 1-67 Remove the document feeder roller cover (2 of 4) .................................................................. |
44 |
Figure 1-68 Remove the document feeder roller cover (3 of 4) .................................................................. |
44 |
Figure 1-69 Remove the document feeder roller cover (4 of 4) .................................................................. |
45 |
Figure 1-70 Remove the document feeder rear cover (1 of 4) ................................................................... |
46 |
Figure 1-71 Remove the document feeder rear cover (2 of 4) ................................................................... |
47 |
Figure 1-72 Remove the document feeder rear cover (3 of 4) ................................................................... |
47 |
Figure 1-73 Remove the document feeder rear cover (4 of 4) ................................................................... |
48 |
xviii |
ENWW |
Figure 1-74 Remove the scanner left cover (1 of 2) ................................................................................. |
49 |
Figure 1-75 Remove the scanner left cover (2 of 2) ................................................................................. |
50 |
Figure 1-76 Remove the scanner right cover (1 of 2) ............................................................................... |
51 |
Figure 1-77 Remove the scanner right cover (2 of 2) ............................................................................... |
52 |
Figure 1-78 Remove the scanner front cover (1 of 3) ............................................................................... |
53 |
Figure 1-79 Remove the scanner front cover (2 of 3) ............................................................................... |
54 |
Figure 1-80 Remove the scanner front cover (3 of 3) ............................................................................... |
54 |
Figure 1-81 Reinstall the scanner front cover (1 of 3) ............................................................................... |
55 |
Figure 1-82 Reinstall the scanner front cover (2 of 3) ............................................................................... |
55 |
Figure 1-83 Reinstall the scanner front cover (3 of 3) ............................................................................... |
56 |
Figure 1-84 Remove the left cover (1 of 2) ............................................................................................. |
57 |
Figure 1-85 Remove the left cover (2 of 2) ............................................................................................. |
57 |
Figure 1-86 Remove the rear cover (1 of 2) ............................................................................................ |
58 |
Figure 1-87 Remove the rear cover (2 of 2) ............................................................................................ |
58 |
Figure 1-88 Remove the right rear cover (1 of 2) .................................................................................... |
59 |
Figure 1-89 Remove the right rear cover (2 of 2) .................................................................................... |
59 |
Figure 1-90 Remove the TCU access door (1 of 3) .................................................................................. |
60 |
Figure 1-91 Remove the TCU access door (2 of 3) .................................................................................. |
61 |
Figure 1-92 Remove the TCU access door (3 of 3) .................................................................................. |
61 |
Figure 1-93 Remove the right door assembly (1 of 7) .............................................................................. |
62 |
Figure 1-94 Remove the right door assembly (2 of 7) .............................................................................. |
63 |
Figure 1-95 Remove the right door assembly (3 of 7) .............................................................................. |
63 |
Figure 1-96 Remove the right-door assembly (4 of 7) ............................................................................... |
64 |
Figure 1-97 Remove the right-door assembly (5 of 7) ............................................................................... |
64 |
Figure 1-98 Remove the right door assembly (6 of 7) .............................................................................. |
65 |
Figure 1-99 Remove the right door assembly (7 of 7) .............................................................................. |
65 |
Figure 1-100 Remove the rear upper cover (1 of 2) ................................................................................ |
66 |
Figure 1-101 Remove the rear upper cover (2 of 2) ................................................................................ |
66 |
Figure 1-102 Remove the right upper cover ........................................................................................... |
67 |
Figure 1-103 Remove the document feeder lower-rear cover .................................................................... |
68 |
Figure 1-104 Remove the stapler/stacker rear cover (1 of 3) .................................................................... |
69 |
Figure 1-105 Remove the stapler/stacker rear cover (2 of 3) .................................................................... |
69 |
Figure 1-106 Remove the stapler/stacker rear cover (3 of 3) .................................................................... |
70 |
Figure 1-107 Remove the document feeder (1 of 4) ................................................................................. |
71 |
Figure 1-108 Remove the document feeder (2 of 4) ................................................................................. |
72 |
Figure 1-109 Remove the document feeder (3 of 4) ................................................................................. |
72 |
Figure 1-110 Remove the document feeder (4 of 4) ................................................................................. |
73 |
Figure 1-111 Remove the scanner assembly (1 of 5) ............................................................................... |
74 |
Figure 1-112 Remove the scanner assembly (2 of 5) ............................................................................... |
75 |
Figure 1-113 Remove the scanner (3 of 5) ............................................................................................. |
75 |
Figure 1-114 Remove the scanner assembly (4 of 5) ............................................................................... |
76 |
ENWW |
xix |
Figure 1-115 Remove the scanner assembly (5 of 5) ............................................................................... |
76 |
Figure 1-116 Reinstall the scanner assembly .......................................................................................... |
77 |
Figure 1-117 Remove the stapler/stacker assembly (1 of 7) ..................................................................... |
78 |
Figure 1-118 Remove the stapler/stacker assembly (2 of 7) ..................................................................... |
79 |
Figure 1-119 Remove the stapler/stacker assembly (3 of 7) ..................................................................... |
79 |
Figure 1-120 Remove the stapler/stacker assembly (4 of 7) ..................................................................... |
80 |
Figure 1-121 Remove the stapler/stacker assembly (5 of 7) ..................................................................... |
80 |
Figure 1-122 Remove the stapler/stacker assembly (6 of 7) ..................................................................... |
81 |
Figure 1-123 Remove the stapler/stacker assembly (7 of 7) ..................................................................... |
81 |
Figure 1-124 Remove the left upper cover .............................................................................................. |
82 |
Figure 1-125 Remove the front upper cover; stapler/stacker model (1 of 2) ............................................... |
83 |
Figure 1-126 Remove the front upper cover; stapler/stacker model (2 of 2) ............................................... |
84 |
Figure 1-127 Remove the front upper cover; non stapler/stacker model ..................................................... |
85 |
Figure 1-128 Remove the front right cover (1 of 2) .................................................................................. |
86 |
Figure 1-129 Remove the front right cover (2 of 2) .................................................................................. |
87 |
Figure 1-130 Remove the front door assembly (1 of 4) ............................................................................ |
89 |
Figure 1-131 Remove the front door assembly (2 of 4) ............................................................................ |
89 |
Figure 1-132 Remove the front door assembly (3 of 4) ............................................................................ |
90 |
Figure 1-133 Remove the front door assembly (4 of 4) ............................................................................ |
90 |
Figure 1-134 Remove the top right cover (1 of 2) .................................................................................... |
91 |
Figure 1-135 Remove the top right cover (2 of 2) .................................................................................... |
92 |
Figure 1-136 Remove the output cover (1 of 2) ....................................................................................... |
93 |
Figure 1-137 Remove the output cover (2 of 2) ....................................................................................... |
94 |
Figure 1-138 Remove the top cover (1 of 3) ........................................................................................... |
95 |
Figure 1-139 Remove the top cover (2 of 3) ........................................................................................... |
96 |
Figure 1-140 Remove the top cover (3 of 3) ........................................................................................... |
96 |
Figure 1-141 Remove the top rear cover (1 of 5) .................................................................................... |
98 |
Figure 1-142 Remove the top rear cover (2 of 5) .................................................................................... |
98 |
Figure 1-143 Remove the top rear cover (3 of 5) .................................................................................... |
99 |
Figure 1-144 Remove the top rear cover (4 of 5) .................................................................................... |
99 |
Figure 1-145 Remove the top rear cover (5 of 5) .................................................................................. |
100 |
Figure 1-146 Remove the document feeder paper present sensor (1 of 2) ................................................ |
101 |
Figure 1-147 Remove the document feeder paper present sensor (2 of 2) ................................................ |
102 |
Figure 1-148 Remove the document feeder hinge (1 of 2) ...................................................................... |
103 |
Figure 1-149 Remove the document feeder hinge (2 of 2) ...................................................................... |
104 |
Figure 1-150 Remove the document feeder width sensor, paper-short and paper-long sensors .................... |
105 |
Figure 1-151 Remove the document feeder width sensor ........................................................................ |
106 |
Figure 1-152 Remove the document feeder paper-short sensor ............................................................... |
106 |
Figure 1-153 Remove the document feeder paper-long sensor ................................................................ |
107 |
Figure 1-154 Remove the document feeder tray extender (1 of 3) ........................................................... |
108 |
Figure 1-155 Remove the document feeder tray extender (2 of 3) ........................................................... |
109 |
xx |
ENWW |
Figure 1-156 Remove the document feeder tray extender (3 of 3) ........................................................... |
109 |
Figure 1-157 Remove the sub-power supply assembly (1 of 2) ................................................................ |
110 |
Figure 1-158 Remove the sub-power supply assembly (2 of 2) ................................................................ |
111 |
Figure 1-159 Remove the sub power supply fan FM5 (1 of 5) ................................................................ |
112 |
Figure 1-160 Remove the sub power supply fan FM5 (2 of 5) ................................................................ |
113 |
Figure 1-161 Remove the sub power supply fan FM5 (3 of 5) ................................................................ |
113 |
Figure 1-162 Remove the sub power supply fan FM5 (4 of 5) ................................................................ |
114 |
Figure 1-163 Remove the sub power supply fan FM5 (5 of 5) ................................................................ |
114 |
Figure 1-164 Remove the lifter-drive assembly (1 of 3) .......................................................................... |
115 |
Figure 1-165 Remove the lifter-drive assembly (2 of 3) .......................................................................... |
116 |
Figure 1-166 Remove the lifter-drive assembly (3 of 3) .......................................................................... |
117 |
Figure 1-167 Remove the ITB front guide assembly (1 of 4) .................................................................... |
119 |
Figure 1-168 Remove the ITB front guide assembly (2 of 4) .................................................................... |
119 |
Figure 1-169 Remove the ITB front guide assembly (3 of 4) .................................................................... |
120 |
Figure 1-170 Remove the ITB front guide assembly (4 of 4) .................................................................... |
120 |
Figure 1-171 Remove the ITB rear guide assembly ................................................................................ |
121 |
Figure 1-172 Remove the residual toner full sensor (1 of 5) .................................................................... |
122 |
Figure 1-173 Remove the residual toner full sensor (2 of 5) .................................................................... |
123 |
Figure 1-174 Remove the residual toner full sensor (3 of 5) .................................................................... |
123 |
Figure 1-175 Remove the residual toner full sensor (4 of 5) .................................................................... |
124 |
Figure 1-176 Remove the residual toner full sensor (5 of 5) .................................................................... |
124 |
Figure 1-177 Reinstall the residual toner full sensor (1 of 3) ................................................................... |
125 |
Figure 1-178 Reinstall the residual toner full sensor (2 of 3) ................................................................... |
125 |
Figure 1-179 Reinstall the residual toner full sensor (3 of 3) ................................................................... |
126 |
Figure 1-180 Remove the residual toner feed assembly (1 of 6) .............................................................. |
128 |
Figure 1-181 Remove the residual toner feed assembly (2 of 6) .............................................................. |
128 |
Figure 1-182 Remove the residual toner feed assembly (3 of 6) .............................................................. |
129 |
Figure 1-183 Remove the residual toner feed assembly (4 of 6) .............................................................. |
129 |
Figure 1-184 Remove the residual toner feed assembly (5 of 6) .............................................................. |
130 |
Figure 1-185 Remove the residual toner feed assembly (6 of 6) .............................................................. |
130 |
Figure 1-186 Remove the paper delivery assembly (1 of 2) .................................................................... |
132 |
Figure 1-187 Remove the paper delivery assembly (2 of 2) .................................................................... |
132 |
Figure 1-188 Remove the laser/scanner (1 of 6) ................................................................................... |
133 |
Figure 1-189 Remove the laser/scanner (2 of 6) ................................................................................... |
134 |
Figure 1-190 Remove the laser/scanner (3 of 6) ................................................................................... |
134 |
Figure 1-191 Remove the laser/scanner (4 of 6) ................................................................................... |
135 |
Figure 1-192 Remove the laser/scanner (5 of 6) ................................................................................... |
135 |
Figure 1-193 Remove the laser/scanner (6 of 6) ................................................................................... |
136 |
Figure 1-194 Remove the cartridge fan FM4 (1 of 3) ............................................................................ |
137 |
Figure 1-195 Remove the cartridge fan FM4 (2 of 3) ............................................................................ |
137 |
Figure 1-196 Remove the cartridge fan FM4 (3 of 3) ............................................................................ |
138 |
ENWW |
xxi |
Figure 1-197 Remove the fuser fan FM2 (1 of 2) .................................................................................. |
139 |
Figure 1-198 Remove the fuser fan FM2 (2 of 2) .................................................................................. |
140 |
Figure 1-199 Remove the formatter fan FM3 (1 of 2) ............................................................................. |
141 |
Figure 1-200 Remove the formatter fan FM3 (2 of 2) ............................................................................. |
142 |
Figure 1-201 Remove the ITB motor M1 (1 of 2) ................................................................................... |
143 |
Figure 1-202 Remove the ITB motor M1 (2 of 2) ................................................................................... |
144 |
Figure 1-203 Remove the drum motor M2 (1 of 2) ................................................................................ |
145 |
Figure 1-204 Remove the drum motor M2 (2 of 2) ................................................................................ |
146 |
Figure 1-205 Remove the developing motor M3 (1 of 2) ........................................................................ |
147 |
Figure 1-206 Remove the developing motor M3 (2 of 2) ........................................................................ |
148 |
Figure 1-207 Remove the fuser motor M4 (1 of 2) ................................................................................. |
149 |
Figure 1-208 Remove the fuser motor M4 (1 of 2) ................................................................................. |
150 |
Figure 1-209 Remove the developing disengagement motor M6 (1 of 2) ................................................. |
151 |
Figure 1-210 Remove the developing disengagement motor M6 (2 of 2) ................................................. |
152 |
Figure 1-211 Remove the power-supply fan FM1 (1 of 3) ...................................................................... |
153 |
Figure 1-212 Remove the power-supply fan FM1 (2 of 3) ...................................................................... |
154 |
Figure 1-213 Remove the power-supply fan FM1 (3 of 3) ...................................................................... |
154 |
Figure 1-214 Remove the power switch (1 of 2) ................................................................................... |
155 |
Figure 1-215 Remove the power switch (2 of 2) ................................................................................... |
156 |
Figure 1-216 Remove the environment sensor (1 of 2) ........................................................................... |
157 |
Figure 1-217 Remove the environment sensor (2 of 2) ........................................................................... |
157 |
Figure 1-218 Remove the SCB (1 of 3) ................................................................................................ |
158 |
Figure 1-219 Remove the SCB (2 of 3) ................................................................................................ |
159 |
Figure 1-220 Remove the SCB (3 of 3) ................................................................................................ |
159 |
Figure 1-221 Reinstall the SCB ........................................................................................................... |
160 |
Figure 1-222 Remove the document feeder open sensor and flag (1 of 4) ................................................ |
161 |
Figure 1-223 Remove the document feeder open sensor and flag (2 of 4) ................................................ |
161 |
Figure 1-224 Remove the document feeder open sensor and flag (3 of 4) ................................................ |
162 |
Figure 1-225 Remove the document feeder open sensor and flag (4 of 4) ................................................ |
162 |
Figure 1-226 Reinstall the document feeder open sensor and flag ........................................................... |
163 |
Figure 1-227 Remove the image scanner memory board (1 of 2) ............................................................ |
164 |
Figure 1-228 Remove the image scanner memory board (2 of 2) ............................................................ |
165 |
Figure 1-229 Remove the fax PCA ...................................................................................................... |
166 |
Figure 1-230 Reinstall the fax PCA ...................................................................................................... |
167 |
Figure 1-231 Remove the HVPS (1 of 4) .............................................................................................. |
168 |
Figure 1-232 Remove the HVPS (2 of 4) .............................................................................................. |
169 |
Figure 1-233 Remove the HVPS (3 of 4) .............................................................................................. |
169 |
Figure 1-234 Remove the HVPS (4 of 4) .............................................................................................. |
170 |
Figure 1-235 Reinstall the HVPS ......................................................................................................... |
170 |
Figure 1-236 Remove the interconnect PCA (1 of 5) .............................................................................. |
171 |
Figure 1-237 Remove the interconnect PCA (2 of 5) .............................................................................. |
172 |
xxii |
ENWW |
Figure 1-238 Remove the interconnect PCA (3 of 5) .............................................................................. |
172 |
Figure 1-239 Remove the interconnect PCA (4 of 5) .............................................................................. |
173 |
Figure 1-240 Remove the interconnect PCA (5 of 5) .............................................................................. |
173 |
Figure 1-241 Remove the DC controller PCA (1 of 4) ............................................................................ |
174 |
Figure 1-242 Remove the DC controller PCA (2 of 4) ............................................................................ |
175 |
Figure 1-243 Remove the DC controller PCA (3 of 4) ............................................................................ |
175 |
Figure 1-244 Remove the DC controller PCA (4 of 4) ............................................................................ |
176 |
Figure 1-245 Remove the formatter cage (1 of 3) .................................................................................. |
177 |
Figure 1-246 Remove the formatter cage (2 of 3) .................................................................................. |
178 |
Figure 1-247 Remove the formatter cage (3 of 3) .................................................................................. |
178 |
Figure 1-248 Remove the first-transfer high-voltage power supply (1 of 2) ................................................ |
179 |
Figure 1-249 Remove the first-transfer high-voltage power supply (2 of 3) ................................................ |
180 |
Figure 1-250 Remove the first-transfer high-voltage power supply (3 of 3) ................................................ |
180 |
Figure 1-251 Reinstall the first-transfer high-voltage power supply ........................................................... |
181 |
Figure 1-252 Remove the second-transfer high-voltage power supply and holder (1 of 3) ........................... |
182 |
Figure 1-253 Remove the second-transfer high-voltage power supply and holder (2 of 3) ........................... |
183 |
Figure 1-254 Remove the second-transfer high-voltage power supply and holder (3 of 3) ........................... |
183 |
Figure 1-255 Remove the driver PCA (1 of 3) ....................................................................................... |
184 |
Figure 1-256 Remove the driver PCA (2 of 3) ....................................................................................... |
185 |
Figure 1-257 Remove the driver PCA (3 of 3) ....................................................................................... |
185 |
Figure 1-258 Remove the LVPS (1 of 6) ............................................................................................... |
187 |
Figure 1-259 Remove the LVPS (2 of 6) ............................................................................................... |
187 |
Figure 1-260 Remove the LVPS (3 of 6) ............................................................................................... |
188 |
Figure 1-261 Remove the LVPS (4 of 6) ............................................................................................... |
188 |
Figure 1-262 Remove the LVPS (5 of 6) ............................................................................................... |
189 |
Figure 1-263 Remove the LVPS (6 of 6) ............................................................................................... |
189 |
Figure 1-264 Remove the duplex-drive assembly (1 of 4) ....................................................................... |
191 |
Figure 1-265 Remove the duplex-drive assembly (2 of 4) ....................................................................... |
192 |
Figure 1-266 Remove the duplex-drive assembly (3 of 4) ....................................................................... |
192 |
Figure 1-267 Remove the duplex-drive assembly (4 of 4) ....................................................................... |
193 |
Figure 1-268 Reinstall the duplex-drive assembly .................................................................................. |
193 |
Figure 1-269 Remove the main drive assembly (1 of 7) ......................................................................... |
195 |
Figure 1-270 Remove the main drive assembly (2 of 7) ......................................................................... |
195 |
Figure 1-271 Remove the main drive assembly (3 of 7) ......................................................................... |
196 |
Figure 1-272 Remove the main drive assembly (4 of 7) ......................................................................... |
196 |
Figure 1-273 Remove the main drive assembly (5 of 7) ......................................................................... |
197 |
Figure 1-274 Remove the main drive assembly (6 of 7) ......................................................................... |
197 |
Figure 1-275 Remove the main drive assembly (optional step; 1 of 4) ..................................................... |
198 |
Figure 1-276 Remove the main drive assembly (optional step; 2 of 4) ..................................................... |
198 |
Figure 1-277 Remove the main drive assembly (optional step; 3 of 4) ..................................................... |
199 |
Figure 1-278 Remove the main drive assembly (optional step; 4 of 4) ..................................................... |
200 |
ENWW |
xxiii |
Figure 1-279 Remove the main drive assembly (7 of 7) ......................................................................... |
201 |
Figure 1-280 Install the main drive assembly (1 of 8) ............................................................................ |
202 |
Figure 1-281 Install the main drive assembly (2 of 8) ............................................................................ |
203 |
Figure 1-282 Install the main drive assembly (3 of 8) ............................................................................ |
203 |
Figure 1-283 Install the main drive assembly (4 of 8) ............................................................................ |
204 |
Figure 1-284 Install the main drive assembly (5 of 8) ............................................................................ |
204 |
Figure 1-285 Install the main drive assembly (6 of 8) ............................................................................ |
205 |
Figure 1-286 Install the main drive assembly (7 of 8) ............................................................................ |
206 |
Figure 1-287 Install the main drive assembly (8 of 8) ............................................................................ |
206 |
Figure 1-288 Remove the fuser drive assembly (1 of 4) .......................................................................... |
208 |
Figure 1-289 Remove the fuser drive assembly (2 of 4) .......................................................................... |
209 |
Figure 1-290 Remove the fuser drive assembly (3 of 4) .......................................................................... |
209 |
Figure 1-291 Remove the fuser drive assembly (4 of 4) .......................................................................... |
210 |
Figure 1-292 Install a replacement fuser drive assembly (1 of 3) ............................................................. |
211 |
Figure 1-293 Install a replacement fuser drive assembly (2 of 3) ............................................................. |
212 |
Figure 1-294 Install a replacement fuser drive assembly (3 of 3) ............................................................. |
212 |
Figure 1-295 Remove the fuser gear assembly (1 of 7) .......................................................................... |
214 |
Figure 1-296 Remove the fuser gear assembly (2 of 7) .......................................................................... |
214 |
Figure 1-297 Remove the fuser gear assembly (3 of 7) .......................................................................... |
215 |
Figure 1-298 Remove the fuser gear assembly (4 of 7) .......................................................................... |
215 |
Figure 1-299 Remove the fuser gear assembly (5 of 7) .......................................................................... |
216 |
Figure 1-300 Remove the fuser gear assembly (6 of 7) .......................................................................... |
216 |
Figure 1-301 Remove the fuser gear assembly (7 of 7) .......................................................................... |
217 |
Figure 1-302 Install a replacement fuser gear assembly (1 of 3) ............................................................. |
218 |
Figure 1-303 Install a replacement fuser gear assembly (2 of 3) ............................................................. |
218 |
Figure 1-304 Install a replacement fuser gear assembly (3 of 3) ............................................................. |
219 |
Figure 1-305 Remove the 1x500 rear cover ......................................................................................... |
220 |
Figure 1-306 Remove the 1x500 left cover (1 of 2) ............................................................................... |
221 |
Figure 1-307 Remove the 1x500 left cover (2 of 2) ............................................................................... |
221 |
Figure 1-308 Remove the 1x500 right-front cover ................................................................................. |
223 |
Figure 1-309 Remove the 1x500 front-upper cover ............................................................................... |
224 |
Figure 1-310 Remove the 1x500 right door (1 of 3) .............................................................................. |
225 |
Figure 1-311 Remove the 1x500 right door (2 of 3) .............................................................................. |
225 |
Figure 1-312 Remove the 1x500 right door (3 of 3) .............................................................................. |
226 |
Figure 1-313 Remove the 1x500 right-lower cover ................................................................................ |
227 |
Figure 1-314 Remove the 1x500 pickup assembly (1 of 4) .................................................................... |
228 |
Figure 1-315 Remove the 1x500 pickup assembly (2 of 4) .................................................................... |
229 |
Figure 1-316 Remove the 1x500 pickup assembly (3 of 4) .................................................................... |
229 |
Figure 1-317 Remove the 1x500 pickup assembly (4 of 4) .................................................................... |
230 |
Figure 1-318 Remove the 1x500 lifter-drive assembly (1 of 2) ................................................................ |
231 |
Figure 1-319 Remove the 1x500 lifter-drive assembly (2 of 2) ................................................................ |
232 |
xxiv |
ENWW |
Figure 1-320 Remove the 1x500 pickup motor ..................................................................................... |
233 |
Figure 1-321 Remove the 1x500 driver PCA ........................................................................................ |
234 |
Figure 1-322 Remove the PD rear cover .............................................................................................. |
235 |
Figure 1-323 Remove the PD left cover (1 of 3) .................................................................................... |
236 |
Figure 1-324 Remove the PD left cover (2 of 3) .................................................................................... |
236 |
Figure 1-325 Remove the PD left cover (3 of 3) .................................................................................... |
237 |
Figure 1-326 Remove the PD right front cover ....................................................................................... |
238 |
Figure 1-327 Remove the PD front upper cover (1 of 2) ......................................................................... |
239 |
Figure 1-328 Remove the PD front upper cover (2 of 2) ......................................................................... |
240 |
Figure 1-329 Remove the PD front door (1 of 3) ................................................................................... |
241 |
Figure 1-330 Remove the PD front door (2 of 3) ................................................................................... |
241 |
Figure 1-331 Remove the PD front door (3 of 3) ................................................................................... |
242 |
Figure 1-332 Remove the PD storage box ............................................................................................ |
243 |
Figure 1-333 PD storage box left-side guides ....................................................................................... |
244 |
Figure 1-334 PD storage box right-side guide ....................................................................................... |
244 |
Figure 1-335 Remove the PD right door (1 of 3) ................................................................................... |
245 |
Figure 1-336 Remove the PD right door (2 of 3) ................................................................................... |
245 |
Figure 1-337 Remove the PD right door (3 of 3) ................................................................................... |
246 |
Figure 1-338 Remove the PD right lower cover (1 of 2) ......................................................................... |
247 |
Figure 1-339 Remove the PD right lower cover (2 of 2) ......................................................................... |
248 |
Figure 1-340 Remove the PD left lower cover (1 of 2) ............................................................................ |
249 |
Figure 1-341 Remove the PD left lower cover (2 of 2) ............................................................................ |
250 |
Figure 1-342 Remove the PD rear lower cover ...................................................................................... |
251 |
Figure 1-343 Remove the PD front lower cover ..................................................................................... |
252 |
Figure 1-344 Remove the PD pickup assembly cassette 1 (1 of 3) ........................................................... |
253 |
Figure 1-345 Remove the PD pickup assembly cassette 1 (2 of 3) ........................................................... |
254 |
Figure 1-346 Remove the PD pickup assembly cassette 1 (3 of 3) ........................................................... |
254 |
Figure 1-347 Reinstall the pickup assembly .......................................................................................... |
255 |
Figure 1-348 Remove the PD pickup assembly cassette 2 (1 of 2) ........................................................... |
256 |
Figure 1-349 Remove the PD pickup assembly cassette 2 (2 of 2) ........................................................... |
257 |
Figure 1-350 Reinstall the pickup assembly .......................................................................................... |
257 |
Figure 1-351 Remove the PD pickup assembly cassette 3 (1 of 2) ........................................................... |
258 |
Figure 1-352 Remove the PD pickup assembly cassette 3 (2 of 2) ........................................................... |
259 |
Figure 1-353 Reinstall the pickup assembly .......................................................................................... |
259 |
Figure 1-354 Remove the PD lifter drive assembly (1 of 3) ..................................................................... |
260 |
Figure 1-355 Remove the PD lifter drive assembly (2 of 3) ..................................................................... |
261 |
Figure 1-356 Remove the PD lifter drive assembly (3 of 3) ..................................................................... |
261 |
Figure 1-357 Remove the PD pickup motor .......................................................................................... |
262 |
Figure 1-358 Remove the PD controller PCA (1 of 2) ............................................................................. |
263 |
Figure 1-359 Remove the PD controller PCA (2 of 2) ............................................................................. |
264 |
Figure 1-360 Remove the HCI right tray ............................................................................................... |
265 |
ENWW |
xxv |
Figure 1-361 Remove the HCI left tray ................................................................................................. |
266 |
Figure 1-362 Remove the HCI left cover (1 of 3) ................................................................................... |
267 |
Figure 1-363 Remove the HCI left cover (2 of 3) ................................................................................... |
267 |
Figure 1-364 Remove the HCI left cover (3 of 3) ................................................................................... |
268 |
Figure 1-365 Remove the HCI left lower cover (1 of 2) .......................................................................... |
269 |
Figure 1-366 Remove the HCI left lower cover (2 of 2) .......................................................................... |
270 |
Figure 1-367 Remove the HCI rear cover ............................................................................................. |
271 |
Figure 1-368 Remove the HCI right door (1 of 2) .................................................................................. |
272 |
Figure 1-369 Remove the HCI right door (1 of 2) .................................................................................. |
273 |
Figure 1-370 Remove the HCI right front cover (1 of 2) ......................................................................... |
274 |
Figure 1-371 Remove the HCI right front cover (2 of 2) ......................................................................... |
274 |
Figure 1-372 Remove the HCI right center cover and right rear cover (1 of 2) .......................................... |
275 |
Figure 1-373 Remove the HCI right center cover and right rear cover (2 of 2) .......................................... |
276 |
Figure 1-374 Remove the HCI right lower cover (1 of 2) ........................................................................ |
277 |
Figure 1-375 Remove the HCI right lower cover (2 of 2) ........................................................................ |
278 |
Figure 1-376 Remove the HCI rear lower cover .................................................................................... |
279 |
Figure 1-377 Remove the HCI left tray lifter drive .................................................................................. |
280 |
Figure 1-378 Reinstall the HCI left tray lifter drive ................................................................................. |
281 |
Figure 1-379 Remove the HCI right tray lifter drive ................................................................................ |
282 |
Figure 1-380 Reinstall the HCI right tray lifter drive ............................................................................... |
283 |
Figure 1-381 Remove the HCI left tray pickup drive (1 of 2) ................................................................... |
284 |
Figure 1-382 Remove the HCI left tray pickup drive (2 of 2) ................................................................... |
285 |
Figure 1-383 Reinstall the HCI tray pickup drive ................................................................................... |
285 |
Figure 1-384 Remove the HCI right tray pickup drive (1 of 2) ................................................................. |
286 |
Figure 1-385 Remove the HCI right tray pickup drive (2 of 2) ................................................................. |
287 |
Figure 1-386 Reinstall the HCI tray pickup drive ................................................................................... |
287 |
Figure 1-387 Remove the HCI controller PCA ....................................................................................... |
288 |
Figure 1-388 Remove the HCI left tray automatic close assembly (1 of 2) ................................................. |
289 |
Figure 1-389 Remove the HCI left tray automatic close assembly (2 of 2) ................................................. |
290 |
Figure 1-390 Remove the HCI right tray automatic close assembly (1 of 2) .............................................. |
291 |
Figure 1-391 Remove the HCI right tray automatic close assembly (2 of 2) .............................................. |
292 |
Figure 1-392 Remove the HCI left tray pickup assembly (1 of 2) ............................................................. |
293 |
Figure 1-393 Remove the HCI left tray pickup assembly (2 of 2) ............................................................. |
294 |
Figure 1-394 Reinstall the HCI tray pickup assembly ............................................................................. |
294 |
Figure 1-395 Remove the HCI right tray pickup assembly (1 of 2) ........................................................... |
295 |
Figure 1-396 Remove the HCI right tray pickup assembly (2 of 2) ........................................................... |
296 |
Figure 1-397 Remove the HCI merge assembly (1 of 2) ......................................................................... |
297 |
Figure 1-398 Remove the HCI merge assembly (2 of 2) ......................................................................... |
298 |
Figure 1-399 Reinstall the merge assembly (1 of 2) ............................................................................... |
299 |
Figure 1-400 Reinstall the merge assembly (2 of 2) ............................................................................... |
299 |
Figure 1-401 Remove the stapler/stacker rear cover (1 of 3) .................................................................. |
300 |
xxvi |
ENWW |
Figure 1-402 Remove the stapler/stacker rear cover (2 of 3) .................................................................. |
301 |
Figure 1-403 Remove the stapler/stacker rear cover (3 of 3) .................................................................. |
301 |
Figure 1-404 Remove the stapler/stacker front right cover ..................................................................... |
302 |
Figure 1-405 Remove the stapler/stacker front left cover ........................................................................ |
303 |
Figure 1-406 Remove the stapler/stacker right door (1 of 4) .................................................................. |
304 |
Figure 1-407 Remove the stapler/stacker right door (2 of 4) .................................................................. |
304 |
Figure 1-408 Remove the stapler/stacker right door (3 of 4) .................................................................. |
305 |
Figure 1-409 Remove the stapler/stacker right door (4 of 4) .................................................................. |
305 |
Figure 1-410 Remove the stapler/stacker left rear cover ........................................................................ |
306 |
Figure 1-411 Remove the output bin assembly (1 of 2) .......................................................................... |
307 |
Figure 1-412 Remove the output bin assembly (2 of 2) .......................................................................... |
308 |
Figure 1-413 Remove the stapler/stacker left lower cover ...................................................................... |
309 |
Figure 1-414 Remove the stapler/stacker operation assembly (1 of 2) ..................................................... |
310 |
Figure 1-415 Remove the stapler/stacker operation assembly (2 of 2) ..................................................... |
311 |
Figure 1-416 Remove the stapler/stacker feed guide assembly (1 of 7) ................................................... |
312 |
Figure 1-417 Remove the stapler/stacker feed guide assembly (2 of 7) ................................................... |
313 |
Figure 1-418 Remove the stapler/stacker feed guide assembly (3 of 7) ................................................... |
313 |
Figure 1-419 Remove the stapler/stacker feed guide assembly (4 of 7) ................................................... |
314 |
Figure 1-420 Remove the stapler/stacker feed guide assembly (5 of 7) ................................................... |
314 |
Figure 1-421 Remove the stapler/stacker feed guide assembly (6 of 7) ................................................... |
315 |
Figure 1-422 Remove the stapler/stacker feed guide assembly (7 of 7) ................................................... |
315 |
Figure 1-423 Remove the stapler/stacker door switch (1 of 3) ................................................................ |
316 |
Figure 1-424 Remove the stapler/stacker door switch (2 of 3) ................................................................ |
316 |
Figure 1-425 Remove the stapler/stacker feed door switch (3 of 3) ......................................................... |
317 |
Figure 1-426 Remove the stapler/stacker inlet solenoid assembly (1 of 2) ................................................ |
318 |
Figure 1-427 Remove the stapler/stacker inlet solenoid assembly (2 of 2) ................................................ |
319 |
Figure 1-428 Remove the stapler/stacker stapler assembly (1 of 3) ......................................................... |
320 |
Figure 1-429 Remove the stapler/stacker stapler assembly (2 of 3) ......................................................... |
320 |
Figure 1-430 Remove the stapler/stacker stapler assembly (3 of 3) ......................................................... |
321 |
Figure 1-431 Reinstall the stapler/stacker stapler assembly .................................................................... |
321 |
Figure 1-432 Remove the stapler/stacker controller PCA (1 of 2) ............................................................ |
322 |
Figure 1-433 Remove the stapler/stacker controller PCA (2 of 2) ............................................................ |
322 |
Figure 2-1 Base product (no optional trays or accessories) ..................................................................... |
330 |
Figure 2-2 Document feeder and scanner ............................................................................................. |
331 |
Figure 2-3 Stapler/stacker ................................................................................................................. |
331 |
Figure 2-4 500-sheet paper feeder ...................................................................................................... |
332 |
Figure 2-5 1x500-sheet paper deck .................................................................................................... |
333 |
Figure 2-6 3x500-sheet paper deck .................................................................................................... |
334 |
Figure 2-7 High capacity input (HCI) paper deck .................................................................................. |
335 |
Figure 2-8 Document feeder and scanner whole units ............................................................................ |
336 |
Figure 2-9 Document feeder assemblies ............................................................................................... |
338 |
ENWW |
xxvii |
Figure 2-10 Scanner assemblies ......................................................................................................... |
340 |
Figure 2-11 Scanner controller board (SCB) ......................................................................................... |
342 |
Figure 2-12 Stapler/stacker covers ..................................................................................................... |
344 |
Figure 2-13 Stapler/stacker components .............................................................................................. |
346 |
Figure 2-14 Covers ........................................................................................................................... |
348 |
Figure 2-15 Right door ...................................................................................................................... |
350 |
Figure 2-16 Internal assemblies (1 of 8) ............................................................................................... |
352 |
Figure 2-17 Internal assemblies (2 of 8) ............................................................................................... |
354 |
Figure 2-18 Internal assemblies (3 of 8) ............................................................................................... |
356 |
Figure 2-19 Internal assemblies (4 of 8) ............................................................................................... |
358 |
Figure 2-20 Internal assemblies (5 of 8) ............................................................................................... |
360 |
Figure 2-21 Internal assemblies (6 of 8) ............................................................................................... |
362 |
Figure 2-22 Internal assemblies (7 of 8) ............................................................................................... |
364 |
Figure 2-23 Internal assemblies (8 of 8) ............................................................................................... |
366 |
Figure 2-24 1x500-sheet paper feeder covers ...................................................................................... |
368 |
Figure 2-25 1x500-sheet paper feeder components .............................................................................. |
370 |
Figure 2-26 1x500-sheet and 3x500-sheet paper deck covers ............................................................... |
372 |
Figure 2-27 1x500-sheet paper deck components ................................................................................. |
374 |
Figure 2-28 3x500-sheet paper deck components ................................................................................. |
376 |
Figure 2-29 HCI covers ..................................................................................................................... |
378 |
Figure 2-30 HCI components (1 of 2) .................................................................................................. |
380 |
Figure 2-31 HCI components (2 of 2) .................................................................................................. |
382 |
xxviii |
ENWW |