HP Color LaserJet CM3530 MFP Series
Service Manual
Theory of operation
Removal and replacement
Solve problems
Parts list
Additional product information:
www.hp.com/support/cljcm3530mfp
www.hp.com/go/usemyMFP
HP Color LaserJet CM3530 MFP Series
Service Manual
Copyright and License
© 2008 Copyright Hewlett-Packard
Development Company, L.P.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Part number: CC519-91013
Edition 2, 10/2008
Trademark Credits
Adobe®, Acrobat®, and PostScript® are trademarks of Adobe Systems Incorporated.
Corel® is a trademark or registered trademark of Corel Corporation or Corel Corporation Limited.
Intel® Core™ is a trademark of Intel Corporation in the U.S. and other countries.
Javaâ„¢ is a US trademark of Sun
Microsystems, Inc.
Microsoft®, Windows®, and Windows®XP are U.S. registered trademarks of Microsoft Corporation.
Windows Vista® is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
PANTONE® is Pantone, Inc's checkstandard trademark for color.
UNIX® is a registered trademark of The Open Group.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
Table of contents
1 Product basics |
 |
Conventions used in this guide ............................................................................................................ |
2 |
Product comparison ............................................................................................................................. |
3 |
Product features ................................................................................................................................... |
4 |
Product view ......................................................................................................................................... |
7 |
Product front view ................................................................................................................ |
7 |
Product back view ................................................................................................................ |
8 |
Interface ports ...................................................................................................................... |
9 |
Serial number and model number location ........................................................................ |
10 |
2 Control panel |
 |
Use the control panel ......................................................................................................................... |
12 |
Control-panel layout ........................................................................................................... |
12 |
Home screen ..................................................................................................................... |
14 |
Buttons on the touchscreen ............................................................................................... |
15 |
Control-panel help system ................................................................................................. |
15 |
Navigate the Administration menu ..................................................................................................... |
16 |
Information menu ............................................................................................................................... |
17 |
Default Job Options menu .................................................................................................................. |
19 |
Default Options for Originals .............................................................................................. |
19 |
Image adjustment .............................................................................................................. |
20 |
Default Copy Options ......................................................................................................... |
21 |
Default Fax Options ........................................................................................................... |
22 |
Default E-mail Options ....................................................................................................... |
23 |
Default Send to Folder Options ......................................................................................... |
24 |
Default Print Options .......................................................................................................... |
25 |
Time/Scheduling menu ....................................................................................................................... |
26 |
Management menu ............................................................................................................................ |
28 |
Initial Setup menu ............................................................................................................................... |
31 |
Networking and I/O ............................................................................................................ |
31 |
Fax Setup .......................................................................................................................... |
38 |
E-mail Setup ...................................................................................................................... |
41 |
Send Setup menu .............................................................................................................. |
41 |
Device Behavior menu ....................................................................................................................... |
42 |
ENWW |
iii |
Print Quality menu .............................................................................................................................. |
46 |
Troubleshooting menu ........................................................................................................................ |
50 |
Resets menu ...................................................................................................................................... |
53 |
Service menu ..................................................................................................................................... |
54 |
3 Paper and print media |
 |
Supported paper and print media ....................................................................................................... |
56 |
Supported paper and print media types ............................................................................................. |
58 |
Tray and bin capacity ......................................................................................................................... |
60 |
Custom paper sizes ............................................................................................................................ |
61 |
Load paper and print media ............................................................................................................... |
62 |
Paper orientation for loading trays ..................................................................................... |
62 |
Tray 1 ................................................................................................................ |
63 |
Tray 2 or optional Tray 3 ................................................................................... |
65 |
Load Tray 1 ........................................................................................................................ |
66 |
Print envelopes ................................................................................................. |
68 |
Load Tray 2 ........................................................................................................................ |
68 |
Load the optional 500-sheet paper and heavy media tray (Tray 3) ................................... |
70 |
Load standard-sized paper into Tray 3 ............................................................ |
70 |
Load custom-size paper into Tray 3 .................................................................. |
72 |
Configure trays ................................................................................................................................... |
75 |
Configure a tray when loading paper ................................................................................. |
75 |
Configure a tray to match print job settings ....................................................................... |
75 |
Automatic overhead transparency sensing (auto sense mode) ......................................... |
75 |
Auto-sense settings ........................................................................................... |
76 |
Select the paper by source, type, or size ........................................................................... |
76 |
Source ............................................................................................................... |
76 |
Type and Size ................................................................................................... |
76 |
Choose an output bin ......................................................................................................................... |
77 |
4 Manage and maintain |
 |
Print information pages ...................................................................................................................... |
80 |
HP Easy Printer Care ......................................................................................................................... |
82 |
Open the HP Easy Printer Care software .......................................................................... |
82 |
HP Easy Printer Care software sections ............................................................................ |
82 |
Embedded Web server ....................................................................................................................... |
85 |
Open the embedded Web server by using a network connection ..................................... |
85 |
Embedded Web server sections ........................................................................................ |
86 |
Use HP Web Jetadmin software ........................................................................................................ |
89 |
Product security features .................................................................................................................... |
90 |
Secure the embedded Web server .................................................................................... |
90 |
HP Encrypted High Performance Hard Disks .................................................................... |
90 |
Secure Disk Erase ............................................................................................................. |
90 |
iv |
ENWW |
Data affected ..................................................................................................... |
90 |
Additional Information ....................................................................................... |
91 |
Job storage ....................................................................................................... |
91 |
DSS authentication ............................................................................................................ |
91 |
Lock the control-panel menus ............................................................................................ |
91 |
Lock the formatter cage ..................................................................................................... |
92 |
Manage supplies ................................................................................................................................ |
93 |
Print-cartridge storage ....................................................................................................... |
93 |
HP policy on non-HP print cartridges ................................................................................. |
93 |
HP fraud hotline and Web site ........................................................................................... |
93 |
Replace supplies ............................................................................................................... |
93 |
Supplies life ....................................................................................................... |
93 |
Locate supplies ................................................................................................. |
94 |
Supply replacement guidelines ......................................................................... |
94 |
Change print cartridges ..................................................................................... |
94 |
Change the toner collection unit ........................................................................ |
98 |
Install memory ................................................................................................. |
100 |
Install DDR memory DIMMs ........................................................... |
100 |
Enable memory for Windows .......................................................... |
104 |
Install an HP Jetdirect or EIO print server card or EIO hard disk ... |
105 |
Clean the product ............................................................................................................................. |
108 |
Clean the outside of the product ...................................................................................... |
108 |
Clean the touchscreen ..................................................................................................... |
108 |
Clean the scanner glass .................................................................................................. |
108 |
Clean the document feeder ............................................................................................. |
108 |
Clean the document-feeder backing ............................................................... |
109 |
Clean the document-feeder rollers .................................................................. |
110 |
Clean the fuser ................................................................................................................ |
111 |
Product updates ............................................................................................................................... |
112 |
Determine the current firmware version ........................................................................... |
112 |
Download new firmware from the HP Web site ............................................................... |
112 |
Transfer the new firmware to the product ........................................................................ |
112 |
Use the flash executable file to update the firmware ...................................... |
112 |
Use FTP to upload the firmware through a browser ....................................... |
113 |
Use FTP to upgrade the firmware on a network connection ........................... |
113 |
Use HP Web Jetadmin to upgrade the firmware ............................................. |
114 |
Use Microsoft Windows commands to upgrade the firmware ......................... |
114 |
5 Theory of operation |
 |
Basic operation ................................................................................................................................. |
116 |
Sequence of operation ..................................................................................................... |
116 |
Engine-control system ...................................................................................................................... |
118 |
DC controller .................................................................................................................... |
119 |
ENWW |
v |
Solenoids ........................................................................................................ |
119 |
Clutches .......................................................................................................... |
120 |
Switches .......................................................................................................... |
120 |
Sensors ........................................................................................................... |
121 |
Motors and fans .............................................................................................. |
122 |
High-voltage power supply .............................................................................................. |
123 |
Low-voltage power supply ............................................................................................... |
125 |
Overcurrent/overvoltage protection ................................................................. |
126 |
Safety .............................................................................................................. |
126 |
Voltage detection ............................................................................................ |
126 |
Sleep (powersave) mode ................................................................................ |
126 |
Low-voltage power supply failure .................................................................... |
126 |
Fuser (fixing) control ........................................................................................................ |
127 |
Fuser (fixing) temperature-control circuit ........................................................ |
128 |
Fuser (fixing) over-temperature protection ...................................................... |
128 |
Fuser (fixing)-failure detection ......................................................................... |
129 |
Laser/scanner system ...................................................................................................................... |
131 |
Image-formation system ................................................................................................................... |
133 |
Image-formation process ................................................................................................. |
134 |
Step 1: Pre-exposure ...................................................................................... |
135 |
Step 2: Primary charging ................................................................................. |
135 |
Step 3: Laser-beam exposure ......................................................................... |
136 |
Step 4: Development ....................................................................................... |
136 |
Step 5: Primary transfer .................................................................................. |
136 |
Step 6: Secondary transfer ............................................................................. |
137 |
Step 7: Separation .......................................................................................... |
138 |
Step 8: Fusing ................................................................................................. |
138 |
Step 9: ITB cleaning ........................................................................................ |
139 |
Step 10: Drum cleaning ................................................................................... |
139 |
Print cartridge .................................................................................................................. |
139 |
Developing-roller engagement and disengagement ........................................................ |
141 |
Intermediate transfer belt (ITB) unit ................................................................................. |
142 |
Primary-transfer-roller engagement and disengagement ................................ |
143 |
ITB cleaning .................................................................................................... |
144 |
Calibration ........................................................................................................................ |
145 |
Color-misregistration control ........................................................................... |
146 |
Image-stabilization control .............................................................................. |
147 |
Pickup, feed, and delivery system .................................................................................................... |
148 |
Pickup-and-feed unit ........................................................................................................ |
151 |
Cassette pickup ............................................................................................... |
151 |
Cassette-presence detection .......................................................... |
153 |
Cassette lift operation ..................................................................... |
153 |
Cassette paper-presence detection ................................................ |
154 |
Multifeed prevention ....................................................................... |
155 |
vi |
ENWW |
Multipurpose tray pickup ................................................................................. |
156 |
Paper feed ....................................................................................................... |
157 |
Skew-feed prevention ..................................................................... |
158 |
OHT detection ................................................................................ |
158 |
Fusing and delivery unit ................................................................................................... |
159 |
Loop control .................................................................................................... |
159 |
Pressure-roller pressurization control ............................................................. |
160 |
Duplexing unit ................................................................................................................. |
162 |
Duplexing reverse and feed control ................................................................ |
163 |
Duplex pickup operation .................................................................................. |
163 |
Jam detection ................................................................................................................................... |
164 |
Optional paper feeder ....................................................................................................................... |
166 |
Paper-feeder pickup and feed operation ......................................................................... |
168 |
Paper-size detection and cassette-presence detection ................................................... |
168 |
Paper-feeder cassette lift operation ................................................................................. |
170 |
Paper-feeder presence detection .................................................................................... |
171 |
Paper-feeder multiple feed prevention ............................................................................. |
172 |
Paper feeder jam detection .............................................................................................. |
173 |
Scanning/image capture system system .......................................................................................... |
174 |
Optical assembly ............................................................................................................. |
174 |
Automatic document feed system .................................................................................... |
174 |
Control panel ................................................................................................... |
174 |
Sensors in the ADF ......................................................................................... |
174 |
ADF paper path ............................................................................................... |
175 |
Stapler ............................................................................................................. |
176 |
6 Removal and replacement |
 |
Introduction ....................................................................................................................................... |
178 |
Removal and replacement strategy ................................................................................................. |
178 |
Electrostatic discharge ..................................................................................................................... |
178 |
Required tools ................................................................................................................................. |
179 |
Before performing service ................................................................................................................ |
180 |
After performing service ................................................................................................................... |
181 |
Post-service test ............................................................................................................................... |
182 |
Print-quality test ............................................................................................................... |
182 |
Copy-quality test .............................................................................................................. |
182 |
DC controller PCA ............................................................................................................................ |
183 |
Parts removal order .......................................................................................................................... |
184 |
Customer self repair (CSR) components ......................................................................................... |
186 |
Print cartridges ................................................................................................................. |
186 |
Stapler cartridge .............................................................................................................. |
188 |
Duplex-reverse guide ....................................................................................................... |
189 |
Toner-collection unit ........................................................................................................ |
190 |
ENWW |
vii |
Formatter PCA ................................................................................................................. |
192 |
Memory DIMM ................................................................................................................. |
193 |
Remove the memory DIMM ............................................................................ |
193 |
Enable memory for Windows .......................................................... |
194 |
Hard drive and Serial Advanced Technology Attachment (SATA) cable ......................... |
195 |
Remove the hard drive and SATA cable ......................................................... |
195 |
Fax PCA and cable .......................................................................................................... |
197 |
Remove the fax PCA and cable ...................................................................... |
197 |
Tray cassette ................................................................................................................... |
199 |
Fuser ............................................................................................................................... |
200 |
Pickup roller (Tray 2) ....................................................................................................... |
201 |
Pickup and feed rollers (Tray 3) ....................................................................................... |
203 |
Separation roller (Tray 2) ................................................................................................. |
204 |
Secondary transfer roller ................................................................................................. |
205 |
Reinstall the transfer roller .............................................................................. |
206 |
Secondary transfer assembly .......................................................................................... |
207 |
Reinstall the secondary transfer assembly ..................................................... |
208 |
Intermediate transfer belt (ITB) ........................................................................................ |
209 |
Front-door assembly ........................................................................................................ |
211 |
Automatic document feeder (ADF) .................................................................................. |
212 |
Calibrate a replacement ADF assembly .......................................................... |
214 |
ADF roller assembly and separation pad ......................................................................... |
215 |
Reinstall the ADF roller assembly ................................................................... |
217 |
Control-panel overlay ....................................................................................................... |
218 |
Control-panel assembly ................................................................................................... |
219 |
Remove the control-panel assembly ............................................................... |
219 |
Right door (optional paper feeder) ................................................................................... |
221 |
External panels, covers, doors, and scanner assembly ................................................................... |
223 |
Identification and location ................................................................................................ |
223 |
Front-upper cover ............................................................................................................ |
225 |
Right-door assembly ........................................................................................................ |
227 |
Right-rear cover ............................................................................................................... |
231 |
Left cover ......................................................................................................................... |
233 |
Rear-upper cover ............................................................................................................. |
236 |
Rear cover ....................................................................................................................... |
238 |
Remove the rear cover .................................................................................... |
238 |
Right-front cover .............................................................................................................. |
239 |
Remove the right-front cover ........................................................................... |
239 |
Reinstall the power button .............................................................. |
241 |
Scanner assembly ........................................................................................................... |
242 |
Remove the scanner assembly ....................................................................... |
242 |
Delivery cover .................................................................................................................. |
245 |
Remove the delivery cover .............................................................................. |
245 |
Left-upper cover ............................................................................................................... |
247 |
viii |
ENWW |
Remove the left-upper cover ........................................................................... |
247 |
Front stapler cover and right-side stapler cover .............................................................. |
249 |
Remove the front stapler cover and right-side stapler cover ........................... |
249 |
Reinstall the right-side stapler cover .............................................. |
256 |
Right-top cover ................................................................................................................ |
258 |
Remove the right-top cover ............................................................................. |
258 |
Front-top cover ................................................................................................................ |
261 |
Remove the front-top cover ............................................................................. |
261 |
Rear-top cover ................................................................................................................. |
262 |
Remove the rear-top cover ............................................................................. |
262 |
Internal assemblies .......................................................................................................................... |
264 |
Stapler assembly ............................................................................................................. |
264 |
Remove the stapler assembly ......................................................................... |
264 |
Reinstall the stapler assembly ........................................................ |
265 |
Stapler power supply ....................................................................................................... |
266 |
Remove the stapler power supply ................................................................... |
266 |
Interconnect board (ICB) ................................................................................................. |
267 |
Remove the ICB .............................................................................................. |
267 |
Reinstall the ICB ............................................................................. |
269 |
DC controller PCA and tray ............................................................................................. |
270 |
Remove the DC controller PCA and tray ........................................................ |
270 |
Low-voltage power supply (LVPS) ................................................................................... |
273 |
Remove the LVPS ........................................................................................... |
273 |
Scanner-control board (SCB) .......................................................................................... |
279 |
Remove the SCB ............................................................................................ |
279 |
Reinstall the SCB ........................................................................... |
283 |
Pickup roller (Tray 1) ....................................................................................................... |
284 |
Delivery fan, cartridge fan, and environmental sensor .................................................... |
285 |
Remove the delivery fan, cartridge fan, and environmental sensor ................ |
285 |
Toner-collection sensor .................................................................................................. |
290 |
Remove the toner-collection sensor ................................................................ |
290 |
Residual-toner-feed motor ............................................................................................... |
292 |
Remove the residual-toner-feed motor ........................................................... |
292 |
Reinstall the residual-toner collection door ..................................... |
296 |
Registration density (RD) sensor assembly ..................................................................... |
297 |
Remove the RD sensor assembly ................................................................... |
297 |
Power-supply fan and fan duct ........................................................................................ |
300 |
Remove the power-supply fan and fan duct .................................................... |
300 |
Registration assembly ..................................................................................................... |
303 |
Remove the registration assembly .................................................................. |
303 |
High-voltage power supply lower ..................................................................................... |
308 |
Remove the high-voltage power supply lower ................................................ |
308 |
Reinstall the high-voltage power supply lower ............................... |
310 |
Developing-disengagement motor ................................................................................... |
311 |
ENWW |
ix |
Remove the developing-disengagement motor .............................................. |
311 |
Pickup motor .................................................................................................................... |
313 |
Remove the pickup motor ............................................................................... |
313 |
Lifter-drive assembly ........................................................................................................ |
314 |
Remove the lifter-drive assembly .................................................................... |
314 |
Cassette-pickup drive assembly ...................................................................................... |
316 |
Remove the cassette-pickup drive assembly .................................................. |
316 |
Reinstall the cassette-pickup drive assembly ................................. |
321 |
Cassette-pickup assembly ............................................................................................... |
323 |
Remove the cassette-pickup assembly ........................................................... |
323 |
Laser/scanner assembly (Y/M) ........................................................................................ |
325 |
Remove the laser/scanner assembly (Y/M) .................................................... |
325 |
Laser/scanner assembly (C/Bk) ....................................................................................... |
332 |
Remove the laser/scanner assembly (C/Bk) ................................................... |
332 |
Reinstall the protective glass cleaner (PGC) actuators .................. |
336 |
High-voltage power supply upper .................................................................................... |
339 |
Remove the high-voltage power supply upper ................................................ |
339 |
Reinstall the high-voltage power supply upper ............................... |
342 |
Drum motor 1 ................................................................................................................... |
343 |
Remove the drum motor 1 .............................................................................. |
343 |
Drum motor 2 or drum motor 3 ........................................................................................ |
344 |
Remove the drum motor 2 or drum motor 3 .................................................... |
344 |
Fuser motor ..................................................................................................................... |
345 |
Remove the fuser motor .................................................................................. |
345 |
Main-drive assembly ........................................................................................................ |
346 |
Remove the main-drive assembly ................................................................... |
346 |
Reinstall the main-drive assembly .................................................. |
350 |
Fuser-drive assembly ...................................................................................................... |
356 |
Remove the fuser-drive assembly ................................................................... |
357 |
Reinstall the fuser-drive assembly .................................................. |
360 |
Delivery assembly ............................................................................................................ |
361 |
Remove the delivery assembly ....................................................................... |
362 |
Reinstall the delivery assembly ...................................................... |
365 |
Duplex-drive assembly .................................................................................................... |
366 |
Remove the duplex-drive assembly ................................................................ |
367 |
Optional paper feeder assembly (Tray 3) ........................................................................ |
368 |
Drawer connector ........................................................................................... |
368 |
7 Solve problems |
 |
Solve problems checklist .................................................................................................................. |
370 |
Menu map ........................................................................................................................................ |
372 |
Troubleshooting process .................................................................................................................. |
373 |
Determine the problem source ........................................................................................ |
373 |
x |
ENWW |
Pre-troubleshooting checklist .......................................................................... |
373 |
Troubleshooting flowchart ............................................................................... |
375 |
Power subsystem ............................................................................................................ |
376 |
Power-on checks ............................................................................................. |
376 |
Power-on troubleshooting overview ............................................... |
376 |
Tools for troubleshooting .................................................................................................................. |
378 |
Individual component diagnostics .................................................................................... |
378 |
LED diagnostics .............................................................................................. |
378 |
Understand lights on the formatter ................................................. |
378 |
Engine diagnostics .......................................................................................... |
381 |
Troubleshooting menu .................................................................... |
381 |
Defeating interlocks ........................................................................ |
384 |
Disable cartridge check .................................................................. |
385 |
Engine-test button .......................................................................... |
386 |
Paper-path test ................................................................................................ |
386 |
Manual sensor test (special-mode test) .......................................................... |
387 |
A TOP (top of page) sensor ............................................................ |
389 |
B and C loop sensors ..................................................................... |
390 |
D fuser (fixing) delivery sensor ....................................................... |
391 |
E duplex re-pickup sensor .............................................................. |
392 |
F output bin full sensor ................................................................... |
393 |
G developing home-position sensor .............................................. |
394 |
H fuser (fixing) pressure-release sensor ....................................... |
395 |
I primary transfer-roller disengagement sensor .............................. |
396 |
K right and front door interlock switches ......................................... |
398 |
L Tray 1 media present sensor ...................................................... |
400 |
M Tray 2 paper out sensor ............................................................. |
401 |
N Tray 2 closed sensor ................................................................... |
402 |
O Tray 2 stack-surface sensor ...................................................... |
403 |
P optional Tray 3-empty sensor ...................................................... |
404 |
Q optional Tray 3 media-feed sensor (Q) ....................................... |
405 |
R optional Tray 3 stack-surface sensor (R) .................................... |
406 |
S, T, and U optional Tray 3 media-size sensors ............................ |
407 |
Paper-path sensors test .................................................................................. |
408 |
Print/Stop test .................................................................................................. |
409 |
Component tests ............................................................................................. |
409 |
Component test (special mode test) ............................................... |
409 |
Diagrams ......................................................................................................................... |
411 |
Formatter PCA ................................................................................................ |
411 |
Location of connectors .................................................................................... |
412 |
DC controller PCA .......................................................................... |
412 |
Paper feeder driver PCA ................................................................ |
413 |
PCAs, motors, fans, switches, solenoids, and clutches .................................. |
414 |
Base product .................................................................................. |
414 |
ENWW |
xi |
1 x 500 paper feeder ...................................................................... |
420 |
Sensors ........................................................................................................... |
421 |
General timing chart ........................................................................................ |
423 |
Circuit diagrams .............................................................................................. |
423 |
Print-quality troubleshooting tools .................................................................................... |
427 |
Repetitive defects ruler ................................................................................... |
428 |
Calibrate the product ....................................................................................... |
430 |
Internal print-quality test pages ........................................................................................ |
431 |
Print-quality-troubleshooting pages ................................................................. |
431 |
Diagnostics page ............................................................................................. |
434 |
Cleaning page ................................................................................................. |
435 |
Configuration pages ........................................................................................ |
436 |
Configuration page ......................................................................... |
436 |
HP embedded Jetdirect page ......................................................... |
438 |
Embedded protocol page ............................................................... |
439 |
Finding important information on the configuration pages .............. |
440 |
Color-band test ................................................................................................ |
440 |
Control-panel messages .................................................................................................................. |
441 |
Event log messages ......................................................................................................................... |
468 |
Print an event log ............................................................................................................. |
468 |
Show an event log ........................................................................................................... |
468 |
Clear the event log ........................................................................................................... |
468 |
Event log message table ................................................................................................. |
468 |
Clear paper jams .............................................................................................................................. |
472 |
Common causes of jams ................................................................................................. |
472 |
Jam locations ................................................................................................................... |
473 |
Clear jams ........................................................................................................................ |
473 |
Clear jams in the right door ............................................................................. |
475 |
Clear jams in the output bin area .................................................................... |
479 |
Clear jams in Tray 1 ........................................................................................ |
480 |
Clear jams in Tray 2 ........................................................................................ |
482 |
Clear jams in the optional 500-sheet paper and heavy media tray |
 |
(Tray 3) ............................................................................................................ |
483 |
Clear jams in the lower right door (Tray 3) ...................................................... |
484 |
Clear jams in the document feeder ................................................................. |
485 |
Jam recovery ................................................................................................................... |
486 |
Solve paper-handling problems ........................................................................................................ |
487 |
Product feeds multiple sheets .......................................................................................... |
487 |
Product feeds incorrect page size ................................................................................... |
487 |
Product pulls from incorrect tray ...................................................................................... |
487 |
Paper does not feed automatically .................................................................................. |
488 |
Paper does not feed from Tray 2 or 3 .............................................................................. |
488 |
Transparencies or glossy paper will not feed .................................................................. |
489 |
Envelopes jam or will not feed in the product .................................................................. |
489 |
xii |
ENWW |
Output is curled or wrinkled ............................................................................................. |
490 |
Product will not duplex or duplexes incorrectly ................................................................ |
490 |
Use manual print modes .................................................................................................................. |
492 |
Solve image-quality problems .......................................................................................................... |
494 |
Image defects table ......................................................................................................... |
494 |
Solve performance problems ........................................................................................................... |
500 |
Solve connectivity problems ............................................................................................................. |
501 |
Solve direct-connect problems ........................................................................................ |
501 |
Solve network problems .................................................................................................. |
501 |
Service mode functions .................................................................................................................... |
503 |
Service menu ................................................................................................................... |
503 |
Product resets .................................................................................................................. |
505 |
Restore factory settings .................................................................................. |
505 |
Hard disk initialization (optional) ..................................................................... |
505 |
NVRAM initialization ........................................................................................ |
506 |
Restore factory settings (cold reset) .............................................................. |
506 |
Solve fax problems ........................................................................................................................... |
507 |
Solve e-mail problems ...................................................................................................................... |
507 |
Validate the SMTP gateway address ............................................................................... |
507 |
Validate the LDAP gateway address ............................................................................... |
507 |
8 Parts and diagrams |
 |
Order parts, accessories, and supplies ............................................................................................ |
510 |
Part numbers .................................................................................................................................... |
511 |
Customer self-repair (CSR) components ......................................................................... |
511 |
Accessories and products ................................................................................................ |
512 |
Print cartridges and toner collection unit .......................................................................... |
513 |
Memory ............................................................................................................................ |
513 |
Cables and interfaces ...................................................................................................... |
514 |
Service kits ...................................................................................................................... |
515 |
Service manuals and user documentation ....................................................................... |
518 |
Screws .............................................................................................................................................. |
519 |
How to use the parts lists and diagrams .......................................................................................... |
519 |
ADF and scanner assemblies .......................................................................................................... |
520 |
External covers, panels, and doors .................................................................................................. |
522 |
Right door assembly ......................................................................................................................... |
524 |
Internal components ......................................................................................................................... |
526 |
Internal components (1 of 5) ............................................................................................ |
526 |
Internal components (2 of 5) ............................................................................................ |
528 |
Internal components (3 of 5) ............................................................................................ |
530 |
Internal components (4 of 5) ............................................................................................ |
532 |
Internal components (5 of 5) ............................................................................................ |
534 |
Fuser ................................................................................................................................ |
536 |
ENWW |
xiii |
250-sheet cassette .......................................................................................................... |
538 |
250-sheet cassette paper pickup assembly ..................................................................... |
540 |
Registration assembly ..................................................................................................... |
542 |
Paper-delivery assembly ................................................................................................. |
544 |
PCAs ................................................................................................................................ |
546 |
Formatter components ..................................................................................................... |
548 |
Accessories ...................................................................................................................................... |
550 |
500-sheet paper feeder ................................................................................................... |
550 |
Paper feeder main body .................................................................................................. |
552 |
Alphabetical parts list ....................................................................................................................... |
554 |
Numerical parts list ........................................................................................................................... |
561 |
Appendix A Service and support |
 |
Hewlett-Packard limited warranty statement .................................................................................... |
570 |
Print cartridge limited warranty statement ........................................................................................ |
571 |
HP Color LaserJet Fuser Kit Limited Warranty Statement ............................................................... |
572 |
End User License Agreement .......................................................................................................... |
573 |
Customer self-repair warranty service .............................................................................................. |
575 |
Customer support ............................................................................................................................. |
576 |
Appendix B Product specifications |
 |
Physical specifications ..................................................................................................................... |
578 |
Electrical specifications .................................................................................................................... |
578 |
Acoustic specifications ..................................................................................................................... |
578 |
Environmental specifications ............................................................................................................ |
579 |
Appendix C Regulatory information |
 |
FCC regulations ............................................................................................................................... |
582 |
Declaration of Conformity ................................................................................................................. |
583 |
Safety statements ............................................................................................................................. |
584 |
Laser safety ..................................................................................................................... |
584 |
Canadian DOC regulations .............................................................................................. |
584 |
VCCI statement (Japan) .................................................................................................. |
584 |
Power cord statement (Japan) ......................................................................................... |
584 |
EMC statement (Korea) ................................................................................................... |
584 |
Laser statement for Finland ............................................................................................. |
584 |
Substances Table (China) ............................................................................................... |
585 |
Index ................................................................................................................................................................. |
587 |
xiv |
ENWW |
List of tables
Table 1-1 |
Product models .................................................................................................................................. |
3 |
Table 1-2 |
Features ............................................................................................................................................. |
4 |
Table 2-1 |
Information menu ............................................................................................................................. |
17 |
Table 2-2 Default Options For Originals menu ................................................................................................. |
19 |
|
Table 2-3 Image Adjustment menu .................................................................................................................. |
20 |
|
Table 2-4 Default Copy Options menu ............................................................................................................. |
21 |
|
Table 2-5 Fax Send menu ................................................................................................................................ |
22 |
|
Table 2-6 Fax Receive menu ........................................................................................................................... |
22 |
|
Table 2-7 Default Print Options menu .............................................................................................................. |
25 |
|
Table 2-8 |
Time/Scheduling menu .................................................................................................................... |
26 |
Table 2-9 |
Management menu .......................................................................................................................... |
28 |
Table 2-10 Networking and I/O ........................................................................................................................ |
31 |
|
Table 2-11 |
Jetdirect menus .............................................................................................................................. |
31 |
Table 2-12 Fax Setup menu ............................................................................................................................. |
38 |
|
Table 2-13 E-mail Setup menu ......................................................................................................................... |
41 |
|
Table 2-14 Send Setup menu .......................................................................................................................... |
41 |
|
Table 2-15 Device Behavior menu ................................................................................................................... |
42 |
|
Table 2-16 Print Quality menu .......................................................................................................................... |
46 |
|
Table 2-17 |
Troubleshooting menu ................................................................................................................... |
50 |
Table 2-18 |
Resets menu .................................................................................................................................. |
53 |
Table 3-1 Supported paper and print media sizes ........................................................................................... |
56 |
|
Table 5-1 Sequence of operation ................................................................................................................... |
117 |
|
Table 5-2 |
Solenoids ....................................................................................................................................... |
119 |
Table 5-3 |
Switches ......................................................................................................................................... |
120 |
Table 5-4 |
Sensors .......................................................................................................................................... |
121 |
Table 5-5 |
Motors ............................................................................................................................................ |
122 |
Table 5-6 |
Fans ............................................................................................................................................... |
123 |
Table 5-7 High-voltage power supply circuits ................................................................................................. |
124 |
|
Table 5-8 Converted DC voltages .................................................................................................................. |
125 |
|
Table 5-9 Fuser (fixing) components .............................................................................................................. |
127 |
|
Table 5-10 Primary-transfer-roller engagement states ................................................................................... |
143 |
|
Table 5-11 |
Image-stabilization controls .......................................................................................................... |
147 |
Table 5-12 Switches and sensors for the pickup, feed, and delivery system ................................................. |
148 |
|
Table 5-13 Motors and solenoids for the pickup, feed, and delivery system ................................................. |
149 |
ENWW |
xv |
Table 5-14 Jams that the product detects ...................................................................................................... |
164 |
|
Table 5-15 Electrical components for the paper feeder ................................................................................. |
167 |
|
Table 6-1 DC controller connectors ................................................................................................................ |
183 |
|
Table 6-2 External panels, covers, doors, and scanner assembly; identification and location ...................... |
223 |
|
Table 7-1 |
Pre-troubleshooting checklist ......................................................................................................... |
373 |
Table 7-2 |
Troubleshooting flowchart .............................................................................................................. |
375 |
Table 7-3 Manual sensor diagnostic tests ...................................................................................................... |
387 |
|
Table 7-4 Paper-path sensors diagnostic tests .............................................................................................. |
408 |
|
Table 7-5 Component test details .................................................................................................................. |
409 |
|
Table 7-6 |
Formatter PCA ............................................................................................................................... |
411 |
Table 7-7 DC controller connectors ................................................................................................................ |
412 |
|
Table 7-8 Paper feeder driver PCA connectors ............................................................................................. |
413 |
|
Table 7-9 PCAs, motors, fans, switches, solenoids, and clutches ................................................................. |
418 |
|
Table 7-10 |
Sensors ........................................................................................................................................ |
421 |
Table 7-11 Important information on the configuration pages ........................................................................ |
440 |
|
Table 7-12 |
Control-panel messages .............................................................................................................. |
441 |
Table 7-13 MP modes under the Adjust paper types> sub menu .................................................................. |
492 |
|
Table 7-14 MP modes under the Optimize submenu ..................................................................................... |
492 |
|
Table 8-1 Customer self-repair (CSR) components ....................................................................................... |
511 |
|
Table 8-2 |
Accessories .................................................................................................................................... |
512 |
Table 8-3 Print cartridges and toner collection unit ........................................................................................ |
513 |
|
Table 8-4 |
Memory .......................................................................................................................................... |
513 |
Table 8-5 Cables and interfaces .................................................................................................................... |
514 |
|
Table 8-6 Service kit contents ........................................................................................................................ |
515 |
|
Table 8-7 Service manuals and user documentation ..................................................................................... |
518 |
|
Table 8-8 |
Common fasteners ........................................................................................................................ |
519 |
Table 8-9 |
ADF/scanner assembly .................................................................................................................. |
521 |
Table 8-10 External covers, panels, and doors; ............................................................................................ |
523 |
|
Table 8-11 Right door assembly .................................................................................................................... |
525 |
|
Table 8-12 Internal components (1 of 5) ........................................................................................................ |
527 |
|
Table 8-13 Internal components (2 of 5) ........................................................................................................ |
529 |
|
Table 8-14 Internal components (3 of 5) ........................................................................................................ |
531 |
|
Table 8-15 Internal components (4 of 5) ........................................................................................................ |
533 |
|
Table 8-16 Internal components (5 of 5) ........................................................................................................ |
535 |
|
Table 8-17 |
Fuser ............................................................................................................................................ |
537 |
Table 8-18 |
250-sheet cassette ....................................................................................................................... |
539 |
Table 8-19 250-sheet cassette paper pickup assembly ................................................................................. |
541 |
|
Table 8-20 |
Registration assembly .................................................................................................................. |
543 |
Table 8-21 |
Paper-delivery assembly .............................................................................................................. |
545 |
Table 8-22 |
PCAs ............................................................................................................................................ |
547 |
Table 8-23 |
Formatter components ................................................................................................................. |
549 |
Table 8-24 500-sheet paper feeder ................................................................................................................ |
551 |
|
Table 8-25 Paper feeder main body ............................................................................................................... |
553 |
|
Table 8-26 |
Alphabetical parts list ................................................................................................................... |
554 |
xvi |
ENWW |
Table 8-27 Numerical parts list ....................................................................................................................... |
561 |
|
Table B-1 |
Product dimensions ....................................................................................................................... |
578 |
Table B-2 Product dimensions, with all doors and trays fully opened ............................................................ |
578 |
|
Table B-3 |
Power requirements ....................................................................................................................... |
578 |
Table B-4 |
Power consumption (average, in watts) ........................................................................................ |
578 |
Table B-5 |
HP Color LaserJet CM3530 MFP Series ....................................................................................... |
578 |
ENWW |
xvii |
xviii |
ENWW |
List of figures
Figure 4-1 Slot for the security cable ................................................................................................................ |
92 |
|
Figure 4-2 Supply item locations ...................................................................................................................... |
94 |
|
Figure 5-1 Relationship between the main product systems ......................................................................... |
116 |
|
Figure 5-2 |
Engine-control system .................................................................................................................. |
118 |
Figure 5-3 DC controller block diagram .......................................................................................................... |
119 |
|
Figure 5-4 High-voltage power supply circuits ............................................................................................... |
123 |
|
Figure 5-5 Low-voltage power-supply circuit .................................................................................................. |
125 |
|
Figure 5-6 Fuser (fixing) components ............................................................................................................ |
127 |
|
Figure 5-7 Fuser temperature-control circuit .................................................................................................. |
128 |
|
Figure 5-8 |
Laser/scanner system ................................................................................................................... |
131 |
Figure 5-9 |
Image-formation system ............................................................................................................... |
133 |
Figure 5-10 |
Image-formation process ............................................................................................................ |
134 |
Figure 5-11 |
Pre-exposure .............................................................................................................................. |
135 |
Figure 5-12 |
Primary charging ......................................................................................................................... |
135 |
Figure 5-13 |
Laser-beam exposure ................................................................................................................. |
136 |
Figure 5-14 |
Development ............................................................................................................................... |
136 |
Figure 5-15 |
Primary transfer .......................................................................................................................... |
137 |
Figure 5-16 |
Secondary transfer ...................................................................................................................... |
137 |
Figure 5-17 |
Separation ................................................................................................................................... |
138 |
Figure 5-18 |
Fusing ......................................................................................................................................... |
138 |
Figure 5-19 |
ITB cleaning ................................................................................................................................ |
139 |
Figure 5-20 |
Drum cleaning ............................................................................................................................. |
139 |
Figure 5-21 |
Print-cartridge system ................................................................................................................. |
140 |
Figure 5-22 Developing-roller engagement and disengagement control ....................................................... |
141 |
|
Figure 5-23 |
ITB unit ........................................................................................................................................ |
142 |
Figure 5-24 Three states of primary-transfer-roller engagement and disengagement ................................... |
144 |
|
Figure 5-25 ITB cleaning process .................................................................................................................. |
145 |
|
Figure 5-26 Toner patterns for calibration ...................................................................................................... |
146 |
|
Figure 5-27 Switches and sensors for the pickup, feed, and delivery system ............................................... |
148 |
|
Figure 5-28 Motors and solenoids for the pickup, feed, and delivery system ................................................ |
149 |
|
Figure 5-29 Three main units of the pickup, feed, and delivery system ......................................................... |
150 |
|
Figure 5-30 Pickup and feed unit ................................................................................................................... |
151 |
|
Figure 5-31 |
Cassette-pickup mechanism ....................................................................................................... |
152 |
Figure 5-32 Cassette presence sensor .......................................................................................................... |
153 |
ENWW |
xix |
Figure 5-33 Cassette lift mechanism .............................................................................................................. |
154 |
|
Figure 5-34 |
Paper-level-detection mechanism .............................................................................................. |
155 |
Figure 5-35 |
Multifeed prevention .................................................................................................................... |
155 |
Figure 5-36 Multipurpose tray pickup mechanism .......................................................................................... |
156 |
|
Figure 5-37 |
Paper-feed mechanism ............................................................................................................... |
157 |
Figure 5-38 |
Skew-feed prevention ................................................................................................................. |
158 |
Figure 5-39 Fuser and delivery unit ................................................................................................................ |
159 |
|
Figure 5-40 |
Loop-control mechanism ............................................................................................................. |
160 |
Figure 5-41 Pressure-roller pressurization control ......................................................................................... |
161 |
|
Figure 5-42 |
Duplexing unit ............................................................................................................................. |
162 |
Figure 5-43 Jam detection sensors ................................................................................................................ |
164 |
|
Figure 5-44 Optional paper feeder ................................................................................................................. |
166 |
|
Figure 5-45 Signals for the paper feeder ....................................................................................................... |
167 |
|
Figure 5-46 Paper-feeder pickup and feed operation .................................................................................... |
168 |
|
Figure 5-47 Paper size detection ................................................................................................................... |
169 |
|
Figure 5-48 Paper-feeder cassette lift ........................................................................................................... |
171 |
|
Figure 5-49 Paper-feeder multiple feed prevention ........................................................................................ |
172 |
|
Figure 5-50 |
Jam detection .............................................................................................................................. |
173 |
Figure 5-51 ADF path for single-sided documents ......................................................................................... |
175 |
|
Figure 5-52 ADF path for two-sided documents ............................................................................................ |
176 |
|
Figure 6-1 Phillips and pozidrive screwdriver comparison ............................................................................. |
179 |
|
Figure 6-2 DC controller PCA ......................................................................................................................... |
183 |
|
Figure 6-3 Parts removal order (1 of 2) .......................................................................................................... |
184 |
|
Figure 6-4 Parts removal order (2 of 2) .......................................................................................................... |
185 |
|
Figure 6-5 Remove the print cartridge (1 of 2) ............................................................................................... |
186 |
|
Figure 6-6 Remove the print cartridge (2 of 2) ............................................................................................... |
187 |
|
Figure 6-7 Remove the stapler cartridge ........................................................................................................ |
188 |
|
Figure 6-8 Remove the duplex-reverse guide (1 of 2) ................................................................................... |
189 |
|
Figure 6-9 Remove the duplex-reverse guide (2 of 2) ................................................................................... |
189 |
|
Figure 6-10 Remove the toner-collection unit (1 of 4) .................................................................................... |
190 |
|
Figure 6-11 Remove the toner-collection unit (2 of 4) .................................................................................... |
190 |
|
Figure 6-12 Remove the toner-collection unit (3 of 4) .................................................................................... |
191 |
|
Figure 6-13 Remove the toner-collection unit (4 of 4) .................................................................................... |
191 |
|
Figure 6-14 Remove the formatter ................................................................................................................. |
192 |
|
Figure 6-15 Remove the memory DIMM (1 of 2) ............................................................................................ |
193 |
|
Figure 6-16 Remove the memory DIMM (2 of 2) ............................................................................................ |
194 |
|
Figure 6-17 Remove the hard drive and SATA cable (1 of 3) ........................................................................ |
195 |
|
Figure 6-18 Remove the hard drive and SATA cable (2 of 3) ........................................................................ |
196 |
|
Figure 6-19 Remove the hard drive and SATA cable (3 of 3) ........................................................................ |
196 |
|
Figure 6-20 Remove the fax PCA and cable (1 of 2) ..................................................................................... |
197 |
|
Figure 6-21 Remove the fax PCA and cable (2 of 2) ..................................................................................... |
198 |
|
Figure 6-22 Remove the tray cassette (1 of 2) ............................................................................................... |
199 |
|
Figure 6-23 Remove the tray cassette (2 of 2) ............................................................................................... |
199 |
|
Figure 6-24 Remove the fuser (1 of 2) ........................................................................................................... |
200 |
xx |
ENWW |
Figure 6-25 Remove the fuser (2 of 2) ........................................................................................................... |
200 |
Figure 6-26 Remove the pickup roller (Tray 2) (1 of 4) .................................................................................. |
201 |
Figure 6-27 Remove the pickup roller (Tray 2) (2 of 4) .................................................................................. |
201 |
Figure 6-28 Remove the pickup roller (Tray 2) (3 of 4) .................................................................................. |
202 |
Figure 6-29 Remove the pickup roller (Tray 2) (4 of 4) .................................................................................. |
202 |
Figure 6-30 Remove the Pickup and feed rollers (Tray 3) (1 of 2) ................................................................. |
203 |
Figure 6-31 Remove the Pickup and feed rollers (Tray 3) (2 of 2) ................................................................. |
203 |
Figure 6-32 Remove the separation roller (Tray 2) ........................................................................................ |
204 |
Figure 6-33 Remove the transfer roller (1 of 3) .............................................................................................. |
205 |
Figure 6-34 Remove the transfer roller (2 of 3) .............................................................................................. |
205 |
Figure 6-35 Remove the transfer roller (3 of 3) .............................................................................................. |
206 |
Figure 6-36 Reinstall the transfer roller .......................................................................................................... |
206 |
Figure 6-37 Remove the transfer roller (2 of 3) .............................................................................................. |
207 |
Figure 6-38 Remove the secondary transfer assembly (1 of 2) ..................................................................... |
207 |
Figure 6-39 Remove the secondary transfer assembly (2 of 2) ..................................................................... |
208 |
Figure 6-40 Reinstall the secondary transfer assembly ................................................................................. |
208 |
Figure 6-41 Remove the intermediate transfer belt (1 of 3) ........................................................................... |
209 |
Figure 6-42 Remove the intermediate transfer belt (2 of 3) ........................................................................... |
209 |
Figure 6-43 Remove the intermediate transfer belt (3 of 3) ........................................................................... |
210 |
Figure 6-44 Remove the front-door assembly (1 of 2) ................................................................................... |
211 |
Figure 6-45 Remove the front-door assembly (2 of 2) ................................................................................... |
211 |
Figure 6-46 Remove the ADF assembly (1 of 4) ............................................................................................ |
212 |
Figure 6-47 Remove the ADF assembly (2 of 4) ............................................................................................ |
212 |
Figure 6-48 Remove the ADF assembly (3 of 4) ............................................................................................ |
213 |
Figure 6-49 Remove the ADF assembly (4 of 4) ............................................................................................ |
213 |
Figure 6-50 Remove the ADF roller assembly and separation pad (1 of 5) ................................................... |
215 |
Figure 6-51 Remove the ADF roller assembly and separation pad (2 of 5) ................................................... |
215 |
Figure 6-52 Remove the ADF roller assembly and separation pad (3 of 5) ................................................... |
216 |
Figure 6-53 Remove the ADF roller assembly and separation pad (4 of 5 ) .................................................. |
216 |
Figure 6-54 Remove the ADF roller assembly and separation pad (5 of 5) ................................................... |
217 |
Figure 6-55 Reinstall the ADF roller assembly ............................................................................................... |
217 |
Figure 6-56 Remove the control-panel overlay (1 of 2) .................................................................................. |
218 |
Figure 6-57 Remove the control-panel overlay (2 of 2) .................................................................................. |
218 |
Figure 6-58 Remove the control-panel assembly (1 of 3) .............................................................................. |
219 |
Figure 6-59 Remove the control-panel assembly (2 of 3) .............................................................................. |
219 |
Figure 6-60 Remove the control-panel assembly (3 of 3) .............................................................................. |
220 |
Figure 6-61 Remove the right door; optional paper feeder (1 of 3) ................................................................ |
221 |
Figure 6-62 Remove the right door; optional paper feeder (2 of 3) ................................................................ |
221 |
Figure 6-63 Remove the right door; optional paper feeder (3 of 3) ................................................................ |
222 |
Figure 6-64 External panels, covers, doors, and scanner assembly; identification and location ................... |
223 |
Figure 6-65 Remove the front-upper cover (1 of 4) ........................................................................................ |
225 |
Figure 6-66 Remove the front-upper cover (2 of 4) ........................................................................................ |
225 |
Figure 6-67 Remove the front-upper cover (3 of 4) ........................................................................................ |
226 |
Figure 6-68 Remove the front-upper cover (4 of 4) ........................................................................................ |
226 |
ENWW |
xxi |
Figure 6-69 Remove the right-door assembly (1 of 8) ................................................................................... |
227 |
Figure 6-70 Remove the right-door assembly (2 of 8) ................................................................................... |
227 |
Figure 6-71 Remove the right-door assembly (3 of 8) ................................................................................... |
228 |
Figure 6-72 Remove the right-door assembly (4 of 8) ................................................................................... |
228 |
Figure 6-73 Remove the right-door assembly (5 of 8) ................................................................................... |
229 |
Figure 6-74 Remove the right-door assembly (6 of 8) ................................................................................... |
229 |
Figure 6-75 Remove the right-door assembly (7 of 8) ................................................................................... |
230 |
Figure 6-76 Remove the right-door assembly (8 of 8) ................................................................................... |
230 |
Figure 6-77 Remove the right-rear cover (1 of 3) ........................................................................................... |
231 |
Figure 6-78 Remove the right-rear cover (2 of 3) ........................................................................................... |
231 |
Figure 6-79 Remove the right-rear cover (3 of 3) ........................................................................................... |
232 |
Figure 6-80 Remove the left cover (1 of 5) ..................................................................................................... |
233 |
Figure 6-81 Remove the left cover (2 of 5) ..................................................................................................... |
233 |
Figure 6-82 Remove the left cover (3 of 5) ..................................................................................................... |
234 |
Figure 6-83 Remove the left cover (4 of 5) ..................................................................................................... |
234 |
Figure 6-84 Remove the left cover (5 of 5) ..................................................................................................... |
235 |
Figure 6-85 Remove the rear-upper cover (1 of 4) ........................................................................................ |
236 |
Figure 6-86 Remove the rear-upper cover (2 of 4) ........................................................................................ |
236 |
Figure 6-87 Remove the rear-upper cover (3 of 4) ........................................................................................ |
237 |
Figure 6-88 Remove the rear-upper cover (4 of 4) ........................................................................................ |
237 |
Figure 6-89 Remove the rear cover (1 of 2) ................................................................................................... |
238 |
Figure 6-90 Remove the rear cover (2 of 2) ................................................................................................... |
238 |
Figure 6-91 Remove the right-front cover (1 of 5) .......................................................................................... |
239 |
Figure 6-92 Remove the right-front cover (2 of 5) .......................................................................................... |
239 |
Figure 6-93 Remove the right-front cover (3 of 5) .......................................................................................... |
240 |
Figure 6-94 Remove the right-front cover (4 of 5) .......................................................................................... |
240 |
Figure 6-95 Remove the right-front cover (5 of 5) .......................................................................................... |
241 |
Figure 6-96 Reinstall the power button .......................................................................................................... |
241 |
Figure 6-97 Remove the scanner assembly (1 of 6) ...................................................................................... |
242 |
Figure 6-98 Remove the scanner assembly (2 of 6) ...................................................................................... |
242 |
Figure 6-99 Remove the scanner assembly (3 of 6) ...................................................................................... |
243 |
Figure 6-100 Remove the scanner assembly (4 of 6) .................................................................................... |
243 |
Figure 6-101 Remove the scanner assembly (5 of 6) .................................................................................... |
244 |
Figure 6-102 Remove the scanner assembly (6 of 6) .................................................................................... |
244 |
Figure 6-103 Remove the delivery cover (1 of 3) ........................................................................................... |
245 |
Figure 6-104 Remove the delivery cover (2 of 3) ........................................................................................... |
246 |
Figure 6-105 Remove the delivery cover (3 of 3) ........................................................................................... |
246 |
Figure 6-106 Remove the left-upper cover (1 of 2) ........................................................................................ |
247 |
Figure 6-107 Remove the left-upper cover (2 of 2) ........................................................................................ |
248 |
Figure 6-108 Remove the front stapler cover and right-side stapler cover (1 of 13) ...................................... |
249 |
Figure 6-109 Remove the front stapler cover and right-side stapler cover (2 of 13) ...................................... |
250 |
Figure 6-110 Remove the front stapler cover and right-side stapler cover (3 of 13) ...................................... |
250 |
Figure 6-111 Remove the front stapler cover and right-side stapler cover (4 of 13) ...................................... |
251 |
Figure 6-112 Remove the front stapler cover and right-side stapler cover (5 of 13) ...................................... |
251 |
xxii |
ENWW |
Figure 6-113 Remove the front stapler cover and right-side stapler cover (6 of 13) ...................................... |
252 |
Figure 6-114 Remove the front stapler cover and right-side stapler cover (7 of 13) ...................................... |
252 |
Figure 6-115 Remove the front stapler cover and right-side stapler cover (8 of 13) ...................................... |
253 |
Figure 6-116 Remove the front stapler cover and right-side stapler cover (9 of 13) ...................................... |
253 |
Figure 6-117 Remove the front stapler cover and right-side stapler cover (10 of 13) .................................... |
254 |
Figure 6-118 Remove the front stapler cover and right-side stapler cover (11 of 13) .................................... |
254 |
Figure 6-119 Remove the front stapler cover and right-side stapler cover (12 of 13) .................................... |
255 |
Figure 6-120 Remove the front stapler cover and right-side stapler cover (13 of 13) .................................... |
255 |
Figure 6-121 Reinstall the right-side stapler cover (1 of 3) ............................................................................ |
256 |
Figure 6-122 Reinstall the right-side stapler cover (2 of 3) ............................................................................ |
256 |
Figure 6-123 Reinstall the right-side stapler cover (3 of 3) ............................................................................ |
257 |
Figure 6-124 Remove the right-top cover (1 of 5) .......................................................................................... |
258 |
Figure 6-125 Remove the right-top cover (2 of 5) .......................................................................................... |
259 |
Figure 6-126 Remove the right-top cover (3 of 5) .......................................................................................... |
259 |
Figure 6-127 Remove the right-top cover (4 of 5) .......................................................................................... |
260 |
Figure 6-128 Remove the right-top cover (5 of 5) .......................................................................................... |
260 |
Figure 6-129 Remove the front-top cover (1 of 2) .......................................................................................... |
261 |
Figure 6-130 Remove the front-top cover (2 of 2) .......................................................................................... |
261 |
Figure 6-131 Remove the rear-top cover (1 of 2) ........................................................................................... |
262 |
Figure 6-132 Remove the rear-top cover (2 of 2) ........................................................................................... |
263 |
Figure 6-133 Remove the stapler assembly (1 of 2) ...................................................................................... |
264 |
Figure 6-134 Remove the stapler assembly (2 of 2) ...................................................................................... |
265 |
Figure 6-135 Reinstall the stapler assembly .................................................................................................. |
265 |
Figure 6-136 Remove the stapler power supply ............................................................................................ |
266 |
Figure 6-137 Remove the ICB (1 of 3) ........................................................................................................... |
267 |
Figure 6-138 Remove the ICB (2 of 3) ........................................................................................................... |
268 |
Figure 6-139 Remove the ICB (3 of 3) ........................................................................................................... |
268 |
Figure 6-140 Reinstall the ICB ....................................................................................................................... |
269 |
Figure 6-141 Remove the DC controller PCA and tray (1 of 4) ...................................................................... |
270 |
Figure 6-142 Remove the DC controller PCA and tray (2 of 4) ...................................................................... |
271 |
Figure 6-143 Remove the DC controller PCA and tray (3 of 4) ...................................................................... |
271 |
Figure 6-144 Remove the DC controller PCA and tray (4 of 4) ...................................................................... |
272 |
Figure 6-145 Remove the LVPS (1 of 10) ...................................................................................................... |
273 |
Figure 6-146 Remove the LVPS (2 of 10) ...................................................................................................... |
274 |
Figure 6-147 Remove the LVPS (3 of 10) ...................................................................................................... |
274 |
Figure 6-148 Remove the LVPS (4 of 10) ...................................................................................................... |
275 |
Figure 6-149 Remove the (5 of 10) ................................................................................................................ |
275 |
Figure 6-150 Remove the (6 of 10) ................................................................................................................ |
276 |
Figure 6-151 Remove the LVPS (7 of 10) ...................................................................................................... |
276 |
Figure 6-152 Remove the LVPS (8 of 10) ...................................................................................................... |
277 |
Figure 6-153 Remove the LVPS (9 of 10) ...................................................................................................... |
277 |
Figure 6-154 Remove the LVPS (10 of 10) .................................................................................................... |
278 |
Figure 6-155 Remove the SCB (1 of 8) .......................................................................................................... |
279 |
Figure 6-156 Remove the SCB (2 of 8) .......................................................................................................... |
280 |
ENWW |
xxiii |
Figure 6-157 Remove the SCB (3 of 8) .......................................................................................................... |
280 |
Figure 6-158 Remove the SCB (4 of 8) .......................................................................................................... |
281 |
Figure 6-159 Remove the (5 of 8) .................................................................................................................. |
281 |
Figure 6-160 Remove the SCB (6 of 8) .......................................................................................................... |
282 |
Figure 6-161 Remove the SCB (7 of 8) .......................................................................................................... |
282 |
Figure 6-162 Remove the SCB (8 of 8) .......................................................................................................... |
283 |
Figure 6-163 Reinstalling the SCB ................................................................................................................. |
283 |
Figure 6-164 Remove the pickup roller (Tray 1) (1 of 2) ................................................................................ |
284 |
Figure 6-165 Remove the pickup roller (Tray 1) (2 of 2) ................................................................................ |
284 |
Figure 6-166 Remove the delivery fan, cartridge fan, and environmental sensor (1 of 9) ............................. |
285 |
Figure 6-167 Remove the delivery fan, cartridge fan, and environmental sensor (2 of 9) ............................. |
285 |
Figure 6-168 Remove the delivery fan, cartridge fan, and environmental sensor (3 of 9) ............................. |
286 |
Figure 6-169 Remove the delivery fan, cartridge fan, and environmental sensor (4 of 9) ............................. |
286 |
Figure 6-170 Remove the delivery fan, cartridge fan, and environmental sensor (5 of 9) ............................. |
287 |
Figure 6-171 Remove the delivery fan, cartridge fan, and environmental sensor (6 of 9) ............................. |
287 |
Figure 6-172 Remove the delivery fan, cartridge fan, and environmental sensor (7 of 9) ............................. |
288 |
Figure 6-173 Remove the delivery fan, cartridge fan, and environmental sensor (8 of 9) ............................. |
288 |
Figure 6-174 Remove the delivery fan, cartridge fan, and environmental sensor (9 of 9) ............................. |
289 |
Figure 6-175 Remove the toner-collection sensor (1 of 4) ............................................................................. |
290 |
Figure 6-176 Remove the toner-collection sensor (2 of 4) ............................................................................. |
290 |
Figure 6-177 Remove the toner-collection sensor (3 of 4) ............................................................................. |
291 |
Figure 6-178 Remove the toner-collection sensor (4 of 4) ............................................................................. |
291 |
Figure 6-179 Remove the residual-toner-feed motor (1 of 7) ......................................................................... |
292 |
Figure 6-180 Remove the residual-toner-feed motor (2 of 7) ......................................................................... |
293 |
Figure 6-181 Remove the residual-toner-feed motor (3 of 7) ......................................................................... |
293 |
Figure 6-182 Remove the residual-toner-feed motor (4 of 7) ......................................................................... |
294 |
Figure 6-183 Remove the residual-toner-feed motor (5 of 7) ......................................................................... |
294 |
Figure 6-184 Remove the residual-toner-feed motor (6 of 7) ......................................................................... |
295 |
Figure 6-185 Remove the residual-toner-feed motor (7 of 7) ......................................................................... |
295 |
Figure 6-186 Reinstall the residual-toner collection door ............................................................................... |
296 |
Figure 6-187 Remove the RD sensor assembly (1 of 6) ................................................................................ |
297 |
Figure 6-188 Remove the RD sensor assembly (2 of 6) ................................................................................ |
297 |
Figure 6-189 Remove the RD sensor assembly (3 of 6) ................................................................................ |
298 |
Figure 6-190 Remove the RD sensor assembly (4 of 6) ................................................................................ |
298 |
Figure 6-191 Remove the RD sensor assembly (5 of 6) ................................................................................ |
299 |
Figure 6-192 Remove the RD sensor assembly (6 of 6) ................................................................................ |
299 |
Figure 6-193 Remove the power-supply fan (1 of 4) ...................................................................................... |
300 |
Figure 6-194 Remove the power-supply fan (2 of 4) ...................................................................................... |
301 |
Figure 6-195 Remove the power-supply fan (3 of 4) ...................................................................................... |
301 |
Figure 6-196 Remove the power-supply fan (4 of 4) ...................................................................................... |
302 |
Figure 6-197 Remove the registration assembly (1 of 8) ............................................................................... |
303 |
Figure 6-198 Remove the registration assembly (2 of 8) ............................................................................... |
304 |
Figure 6-199 Remove the registration assembly (3 of 8) ............................................................................... |
304 |
Figure 6-200 Remove the registration assembly (4 of 8) ............................................................................... |
305 |
xxiv |
ENWW |
Figure 6-201 Remove the registration assembly (5 of 8) ............................................................................... |
305 |
Figure 6-202 Remove the registration assembly (6 of 8) ............................................................................... |
306 |
Figure 6-203 Remove the registration assembly (7 of 8) ............................................................................... |
306 |
Figure 6-204 Remove the registration assembly (8 of 8) ............................................................................... |
307 |
Figure 6-205 Remove the high-voltage power supply lower (1 of 4) .............................................................. |
308 |
Figure 6-206 Remove the high-voltage power supply lower (2 of 4) .............................................................. |
309 |
Figure 6-207 Remove the high-voltage power supply lower (3 of 4) .............................................................. |
309 |
Figure 6-208 Remove the high-voltage power supply lower (4 of 4) .............................................................. |
310 |
Figure 6-209 Reinstall the high-voltage power supply lower .......................................................................... |
310 |
Figure 6-210 Remove the developing-disengagement motor (1 of 2) ............................................................ |
311 |
Figure 6-211 Remove the developing-disengagement motor (2 of 2) ............................................................ |
312 |
Figure 6-212 Remove the pickup motor ......................................................................................................... |
313 |
Figure 6-213 Remove the lifter-drive assembly (1 of 2) ................................................................................. |
314 |
Figure 6-214 Remove the lifter-drive assembly (2 of 2) ................................................................................. |
315 |
Figure 6-215 Remove the cassette-pickup drive assembly (1 of 10) ............................................................. |
316 |
Figure 6-216 Remove the cassette-pickup drive assembly (2 of 10) ............................................................. |
317 |
Figure 6-217 Remove the cassette-pickup drive assembly (3 of 10) ............................................................. |
317 |
Figure 6-218 Remove the cassette-pickup drive assembly (4 of 10) ............................................................. |
318 |
Figure 6-219 Remove the cassette-pickup drive assembly (5 of 10) ............................................................. |
318 |
Figure 6-220 Remove the cassette-pickup drive assembly (6 of 10) ............................................................. |
319 |
Figure 6-221 Remove the cassette-pickup drive assembly (7 of 10) ............................................................. |
319 |
Figure 6-222 Remove the cassette-pickup drive assembly (8 of 10) ............................................................. |
320 |
Figure 6-223 Remove the cassette-pickup drive assembly (9 of 10) ............................................................. |
320 |
Figure 6-224 Remove the cassette-pickup drive assembly (10 of 10) ........................................................... |
321 |
Figure 6-225 Reinstall the cassette-pickup drive assembly (1 of 3) ............................................................... |
321 |
Figure 6-226 Reinstall the cassette-pickup drive assembly (2 of 3) ............................................................... |
322 |
Figure 6-227 Reinstall the cassette-pickup drive assembly (3 of 3) ............................................................... |
322 |
Figure 6-228 Remove the cassette-pickup assembly (1 of 3) ........................................................................ |
323 |
Figure 6-229 Remove the cassette-pickup assembly (2 of 3) ........................................................................ |
324 |
Figure 6-230 Remove the cassette-pickup assembly (3 of 3) ........................................................................ |
324 |
Figure 6-231 Remove the laser/scanner assembly (Y/M) (1 of 12) ............................................................... |
325 |
Figure 6-232 Remove the laser/scanner assembly (Y/M) (2 of 12) ............................................................... |
326 |
Figure 6-233 Remove the laser/scanner assembly (Y/M) (3 of 12) ............................................................... |
326 |
Figure 6-234 Remove the laser/scanner assembly (Y/M) (4 of 12) ............................................................... |
327 |
Figure 6-235 Remove the laser/scanner assembly (Y/M) (5 of 12) ............................................................... |
327 |
Figure 6-236 Remove the laser/scanner assembly (Y/M) (6 of 12) ............................................................... |
328 |
Figure 6-237 Remove the laser/scanner assembly (Y/M) (7 of 12) ............................................................... |
328 |
Figure 6-238 Remove the laser/scanner assembly (Y/M) (8 of 12) ............................................................... |
329 |
Figure 6-239 Remove the laser/scanner assembly (Y/M) (9 of 12) ............................................................... |
329 |
Figure 6-240 Remove the laser/scanner assembly (Y/M) (10 of 12) ............................................................. |
330 |
Figure 6-241 Remove the laser/scanner assembly (Y/M) (11 of 12) ............................................................. |
330 |
Figure 6-242 Remove the laser/scanner assembly (Y/M) (12 of 12) ............................................................. |
331 |
Figure 6-243 Remove the laser/scanner assembly (C/Bk) (1 of 7) ................................................................ |
332 |
Figure 6-244 Remove the laser/scanner assembly (C/Bk) (2 of 7) ................................................................ |
333 |
ENWW |
xxv |
Figure 6-245 Remove the laser/scanner assembly (C/Bk) (3 of 7) ................................................................ |
333 |
Figure 6-246 Remove the laser/scanner assembly (C/Bk) (4 of 7) ................................................................ |
334 |
Figure 6-247 Remove the laser/scanner assembly (C/Bk) (5 of 7) ................................................................ |
334 |
Figure 6-248 Remove the laser/scanner assembly (C/Bk) (6 of 7) ................................................................ |
335 |
Figure 6-249 Remove the laser/scanner assembly (C/Bk) (7 of 7) ................................................................ |
335 |
Figure 6-250 Reinstall the PGC actuators (1 of 5) ......................................................................................... |
336 |
Figure 6-251 Reinstall the PGC actuators (2 of 5) ......................................................................................... |
336 |
Figure 6-252 Reinstall the PGC actuators (3 of 5) ......................................................................................... |
337 |
Figure 6-253 Reinstall the PGC actuators (4 of 5) ......................................................................................... |
337 |
Figure 6-254 Reinstall the PGC actuators (5 of 5) ......................................................................................... |
338 |
Figure 6-255 Remove the high-voltage power supply upper (1 of 5) ............................................................. |
339 |
Figure 6-256 Remove the high-voltage power supply upper (2 of 5) ............................................................. |
340 |
Figure 6-257 Remove the high-voltage power supply upper (3 of 5) ............................................................. |
340 |
Figure 6-258 Remove the high-voltage power supply upper (4 of 5) ............................................................. |
341 |
Figure 6-259 Remove the high-voltage power supply upper (5 of 5) ............................................................. |
341 |
Figure 6-260 Reinstall the high-voltage power supply upper ......................................................................... |
342 |
Figure 6-261 Remove the drum motor 1 ........................................................................................................ |
343 |
Figure 6-262 Remove the drum motor 2 or drum motor 3 .............................................................................. |
344 |
Figure 6-263 Remove the fuser motor ........................................................................................................... |
345 |
Figure 6-264 Remove the main-drive assembly (1 of 7) ................................................................................ |
346 |
Figure 6-265 Remove the main-drive assembly (2 of 7) ................................................................................ |
347 |
Figure 6-266 Remove the main-drive assembly (3 of 7) ................................................................................ |
347 |
Figure 6-267 Remove the main-drive assembly (4 of 7) ................................................................................ |
348 |
Figure 6-268 Remove the main-drive assembly (5 of 7) ................................................................................ |
348 |
Figure 6-269 Remove the main-drive assembly (6 of 7) ................................................................................ |
349 |
Figure 6-270 Remove the main-drive assembly (7 of 7) ................................................................................ |
349 |
Figure 6-271 Reinstall the main-drive assembly (1 of 11) .............................................................................. |
350 |
Figure 6-272 Reinstall the main-drive assembly (2 of 11) .............................................................................. |
350 |
Figure 6-273 Reinstall the main-drive assembly (3 of 11) .............................................................................. |
351 |
Figure 6-274 Reinstall the main-drive assembly (4 of 11) .............................................................................. |
351 |
Figure 6-275 Reinstall the main-drive assembly (5 of 11) .............................................................................. |
352 |
Figure 6-276 Reinstall the main-drive assembly (6 of 11) .............................................................................. |
352 |
Figure 6-277 Reinstall the main-drive assembly (7 of 11) .............................................................................. |
353 |
Figure 6-278 Reinstall the main-drive assembly (8 of 11) .............................................................................. |
353 |
Figure 6-279 Reinstall the main-drive assembly (9 of 11) .............................................................................. |
354 |
Figure 6-280 Reinstall the main-drive assembly (10 of 11) ............................................................................ |
354 |
Figure 6-281 Reinstall the main-drive assembly (11 of 11) ............................................................................ |
355 |
Figure 6-282 Remove the fuser-drive assembly (1 of 6) ................................................................................ |
357 |
Figure 6-283 Remove the fuser-drive assembly (2 of 6) ................................................................................ |
357 |
Figure 6-284 Remove the fuser-drive assembly (3 of 6) ................................................................................ |
358 |
Figure 6-285 Remove the fuser-drive assembly (4 of 6) ................................................................................ |
358 |
Figure 6-286 Remove the fuser-drive assembly (5 of 6) ................................................................................ |
359 |
Figure 6-287 Remove the fuser-drive assembly (6 of 6) ................................................................................ |
359 |
Figure 6-288 Reinstall the fuser-drive assembly ............................................................................................ |
360 |
xxvi |
ENWW |
Figure 6-289 Remove the delivery assembly (1 of 5) .................................................................................... |
362 |
|
Figure 6-290 Remove the delivery assembly (2 of 5) .................................................................................... |
362 |
|
Figure 6-291 Remove the delivery assembly (3 of 5) .................................................................................... |
363 |
|
Figure 6-292 Remove the delivery assembly (4 of 5) .................................................................................... |
363 |
|
Figure 6-293 Remove the delivery assembly (5 of 5) .................................................................................... |
364 |
|
Figure 6-294 Reinstall the delivery assembly (1 of 2) .................................................................................... |
365 |
|
Figure 6-295 Reinstall the delivery assembly (2 of 2) .................................................................................... |
365 |
|
Figure 6-296 Remove the duplex-drive assembly (1 of 2) ............................................................................. |
367 |
|
Figure 6-297 Remove the duplex-drive assembly (2 of 2) ............................................................................. |
367 |
|
Figure 6-298 Remove the drawer connector; optional paper feeder .............................................................. |
368 |
|
Figure 7-1 |
Front-door interlock ....................................................................................................................... |
384 |
Figure 7-2 |
Right-door interlock ....................................................................................................................... |
384 |
Figure 7-3 |
Engine-test button ......................................................................................................................... |
386 |
Figure 7-4 Test the TOP sensor ..................................................................................................................... |
389 |
|
Figure 7-5 Test the loop sensors .................................................................................................................... |
390 |
|
Figure 7-6 Test the fuser delivery sensor (1 of 2) .......................................................................................... |
391 |
|
Figure 7-7 Test the fuser (fixing) delivery sensor (2 of 2) ............................................................................... |
391 |
|
Figure 7-8 Test the duplex re-pickup sensor .................................................................................................. |
392 |
|
Figure 7-9 Test the output-bin-full sensor ...................................................................................................... |
393 |
|
Figure 7-10 Test the fuser (fixing) pressure-release sensor (1 of 2) .............................................................. |
395 |
|
Figure 7-11 Test the fuser (fixing) pressure-release sensor (2 of 2) .............................................................. |
395 |
|
Figure 7-12 Test the primary transfer-roller disengagement sensor (1 of 2) .................................................. |
396 |
|
Figure 7-13 Test the primary transfer-roller disengagement sensor (2 of 2) .................................................. |
397 |
|
Figure 7-14 Test the rightand front-door interlock switches (1 of 4) ............................................................ |
398 |
|
Figure 7-15 Test the rightand front-door interlock switches (2 of 4) ............................................................ |
398 |
|
Figure 7-16 Test the rightand front-door interlock switches (3 of 4) ............................................................ |
399 |
|
Figure 7-17 Test the rightand front-door interlock switches (4 of 4) ............................................................ |
399 |
|
Figure 7-18 Test the Tray 1 media-present sensor ....................................................................................... |
400 |
|
Figure 7-19 Test the tray 2 paper-out sensor ................................................................................................ |
401 |
|
Figure 7-20 Test the Tray 2 closed sensor (1 of 2) ........................................................................................ |
402 |
|
Figure 7-21 Test the Tray 2 closed sensor (2 of 2) ........................................................................................ |
402 |
|
Figure 7-22 Test the Tray 2 stack-surface sensor .......................................................................................... |
403 |
|
Figure 7-23 Test the optional Tray 3-empty sensor ....................................................................................... |
404 |
|
Figure 7-24 Test the optional Tray 3 media-feed sensor .............................................................................. |
405 |
|
Figure 7-25 Test the optional Tray 3 stack-surface sensor ........................................................................... |
406 |
|
Figure 7-26 Test the optional Tray 3 media-size sensors .............................................................................. |
407 |
|
Figure 7-27 |
Formatter PCA ............................................................................................................................ |
411 |
Figure 7-28 DC controller PCA ....................................................................................................................... |
412 |
|
Figure 7-29 Paper feeder driver PCA ............................................................................................................ |
413 |
|
Figure 7-30 Component locations (1 of 5) ...................................................................................................... |
414 |
|
Figure 7-31 Component locations (2 of 5) ...................................................................................................... |
415 |
|
Figure 7-32 Component locations (3 of 5) ...................................................................................................... |
415 |
|
Figure 7-33 Component locations (4 of 5) ...................................................................................................... |
416 |
|
Figure 7-34 Component locations (5 of 5) ...................................................................................................... |
417 |
ENWW |
xxvii |
Figure 7-35 1 x 500 paper feeder ................................................................................................................... |
420 |
|
Figure 7-36 |
Sensors ...................................................................................................................................... |
421 |
Figure 7-37 General timing chart .................................................................................................................... |
423 |
|
Figure 7-38 General circuit diagram (1 of 2) .................................................................................................. |
424 |
|
Figure 7-39 General circuit diagram (2 of 2) .................................................................................................. |
425 |
|
Figure 7-40 Product circuit block diagram ...................................................................................................... |
425 |
|
Figure 7-41 Paper feeder circuit diagram ....................................................................................................... |
426 |
|
Figure 7-42 Repetitive defects ruler ............................................................................................................... |
428 |
|
Figure 7-43 Print-quality troubleshooting procedure ...................................................................................... |
431 |
|
Figure 7-44 Yellow print-quality troubleshooting page ................................................................................... |
432 |
|
Figure 7-45 Yellow comparison page ............................................................................................................. |
432 |
|
Figure 7-46 Black print-quality troubleshooting page ..................................................................................... |
433 |
|
Figure 7-47 |
Configuration page ..................................................................................................................... |
436 |
Figure 7-48 HP embedded Jetdirect page ..................................................................................................... |
438 |
|
Figure 7-49 Embedded protocol page ........................................................................................................... |
439 |
|
Figure 7-50 |
Jam locations .............................................................................................................................. |
473 |
Figure 8-1 |
ADF/scanner assembly ................................................................................................................. |
520 |
Figure 8-2 External covers, panels, and doors .............................................................................................. |
522 |
|
Figure 8-3 Right door assembly ..................................................................................................................... |
524 |
|
Figure 8-4 Internal components (1 of 5) ......................................................................................................... |
526 |
|
Figure 8-5 Internal components (2 of 5) ......................................................................................................... |
528 |
|
Figure 8-6 Internal components (3 of 5) ......................................................................................................... |
530 |
|
Figure 8-7 Internal components (4 of 5) ......................................................................................................... |
532 |
|
Figure 8-8 Internal components (5 of 5) ......................................................................................................... |
534 |
|
Figure 8-9 |
Fuser ............................................................................................................................................. |
536 |
Figure 8-10 |
250-sheet cassette ...................................................................................................................... |
538 |
Figure 8-11 250-sheet cassette paper pickup assembly ................................................................................ |
540 |
|
Figure 8-12 |
Registration assembly ................................................................................................................. |
542 |
Figure 8-13 |
Paper-delivery assembly ............................................................................................................. |
544 |
Figure 8-14 |
PCAs ........................................................................................................................................... |
546 |
Figure 8-15 |
Formatter components ................................................................................................................ |
548 |
Figure 8-16 500-sheet paper feeder .............................................................................................................. |
550 |
|
Figure 8-17 Paper feeder main body ............................................................................................................. |
552 |
xxviii |
ENWW |