l the
Reservoir bottles and print! The whole operation is very easy.
Continuous Ink Supply System
for
HP1200
Installation Instruction
For AT Prefilled Version
With Auto Reset Chips
This Version of the Continuous Ink Flow System comes with Prefilled
Cartridges and Auto Reset Chips. You just need to fil
It’s really an effective tool to save your money.
HP Business Inkjet 1200
Welcome to use our Continuous Ink Supply System. It will largely reduce your
printing cost. It is really the perfect compatible products for Inkjet printers .In
order to insure you the easy and safe operation, please kindly to read our
instruction carefully before using the CISS.
1、General Guide:
1、Components
A、CIS system 1 set B、 Air filters 4pcs C、Support Arm 1 set
D、Refill Kit 4pcs E、Instruction CD 1pc
2、Opening box inspection
a、Check whether all the accessories are ready.
、
Check whether there's leakage of CIS System, whether some tubes have been
b
separated from CISS. If there is, please kindly to contact the local dealer.
、
Check whether there is air space in the tube. If the length of air space is more than 20cm,
c
2、Printer testing:
3、Installing steps:
(1)、First step
please clean the printer head for 2 or 3 times before printing.
1、Check whether the printer is all in normal, like mechanical status, lubrication status, broken or not.
2、Print testing lines, insure the printing head is in gear.
3、Print pictures, to see whether the printing image is ok.
Put the CISS on the left side Pull up the rubber plug Place the 4pcs air filters ready
of the printer, in the same time in the air hole. in the air holes, the thicker
order all the tubes in the correct side is the assembly part.
position.
(2)、The second step: Set up the Continuous Ink Supply System
Loading...