Hotpoint SH53CX S, SH53CKX S, SH53K S, SD53, SHS53X S User Manual

...
0 (0)

SH51X S

SH53CX S

SH53K S

SH53X S

SHS53X S

SHS53CX S

SH53CKX S

KSO53CX S

SD53X

SD53

English

Operating Instructions

OVEN Contents

Operating Instructions,1

Warnings,2

Description of the appliance,3

Installation,4

Electrical Connection,5

Start-up and use,6

Modes,6

The electronic programmer*,9

Precautions and tips,10

Maintenance and care,10

Afetr Sales Service,12

Guarantee,13

 

us

on

 

24

phone 24

your

 

24

 

Please08448activate

to

guarantee

GB Warnings

WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.

Never use steam cleaners or pressure cleaners on the appliance.

WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.

! When you place the rack inside, make sure that the stop is directed upwards and in the back of the cavity.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

2

Hotpoint SH53CX S, SH53CKX S, SH53K S, SD53, SHS53X S User Manual

Description of the appliance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Overall view

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.

POSITION 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

POSITION 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.

POSITION 3

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.

POSITION 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.

POSITION 5

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.

GUIDES for the sliding racks

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7.

DRIPPING PAN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8.

GRILL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9.

Control panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control panel

1.SELECTOR Knob

2.TIMER Knob*

3.THERMOSTAT Knob

4.Indicator light THERMOSTAT

5.ELECTRONIC programmer*

1

2

4

3

1

5

4

3

••••

GB

6

5

4

3

2

1

* Only available in certain models.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

3

GB Installation

!Please keep this instruction booklet in a safe place for future reference. If the appliance is sold, given away or moved, please make sure the booklet is also passed on to the new owners so that they may benefit from the advice contained within it.

!Please read this instruction manual carefully: it contains important information concerning the safe operation, installation and maintenance of the appliance.

Positioning

!Do not let children play with the packaging material; it should be disposed of in accordance with local separated waste collection standards (see Precautions and tips).

!The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may damage property or cause harm to people or animals.

Built-in appliances

Use an appropriate cabinet to ensure that the appliance operates properly:

The panels adjacent to the oven must be made of heatresistant material.

Cabinets with a veneer exterior must be assembled with glues which can withstand temperatures of up to 100°C.

To install the oven under the counter (see diagram) or in a kitchen unit, the cabinet must have the following dimensions:

Ventilation

To ensure adequate ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams).

.

45

mm.

mm

 

560

 

 

Centring and fixing

Position the 4 tabs on the side of the oven so that they are lined up with the 4 holes on the outer frame. Adjust the tabs according to the thickness of the cabinet side panel, as shown below:

20 mm thick: take off the removable part of the tab (see diagram).;

18 mm thick: use the first groove, which has already been set in the factory (see diagram).

 

 

 

.

 

23 mm.

 

.min

mm.595

mm.567

mm

585-575mm.

 

 

 

547

 

 

558

mm.

 

 

 

595

 

5 mm.

 

mm.

.

 

 

mm

 

 

 

545

 

 

.

 

 

 

mm

 

 

25

 

 

! The appliance must not come into contact with electrical parts once it has been installed.

The indications for consumption given on the data plate have been calculated for this type of installation.

16 mm thick: use the second groove (see diagram).

Secure the appliance to the cabinet by opening the oven door and putting 4 screws into the 4 holes on the outer frame.

! All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

4

Electrical Connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

! THIS APPLIANCE MUST BE EARTHED.

Fitting the power supply cable

L

N

1.Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover (see diagram)

.

2.Install the power supply cable by loosening the cable clamp screw and the three wire contact screws

L-N-.

Connect the wires to the corresponding terminals: the Blue wire to the terminal marked (N), the Brown wire to the terminal marked (L) and the Yellow/Green wire

to the terminal marked (see diagram).

3.Secure the cable by fastening the clamp screw.

4.Close the cover of the terminal board.

Electrical Connection:

Voltage Frequency: see data plate

Fuse Section: 16A

Supply cable: 3x1.5mm2

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

Power cable supply connection to the electrical mains:

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H

05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even

when replacing the oven lamp. GB Using the appliance without correct earthing is highly dangerous.

! After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

APPLIANCE SPECIFICATIONS

Dimensions*

width 43.5 cm

height 32,4 cm

 

depth 41.5 cm

Volume*

59 l

Dimensions**

width 45.5 cm

height 32,4 cm

 

depth 41.5 cm

Volume**

62 l

Electrical

voltage: 230 - 240 V~ 50/60 Hz

or 50 Hz(see data plate)

connections

maximum power absorbed

 

2250-2400 W

 

Directive 2002/40/EC on the label

 

of electric ovens. Standard EN 50304

ENERGY

Energy consumption for Natural

LABEL

convection - heating mode:

 

Convection mode

 

Declared energy consumption for

 

Forced convection Class - heating

 

mode:

 

Multi-cooking

 

This appliance conforms to the

 

following European Economic

 

Community directives:

 

- 2006/95/EEC of 12/12/06 (Low

 

Voltage) and subsequent

 

amendments;

 

- 2004/108/EEC of 15/12/04

 

(Electromagnetic Compatibility) and

 

subsequent amendments;

 

- 93/68/EEC of 22/07/93 and

 

subsequent amendments.

 

- 2012/19/EC and subsequent

 

amendments.

*Only for models with drawn rails.

**Only for models with wire rails.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

5

Loading...
+ 11 hidden pages