Hotpoint HDA3600nCC, HDA3600nBB, HDA3500NWW, HDA3500NBB, HDA3500NCC User Manual

This wall area

must be free of

pipes or wires

Countertop

4

6

Hot

water

line on

left

44

2

Plumbing and electrical

service must enter

inside shaded area

24" From wall

24" MIN.

90°

19" MIN. from wall

24"

MIN.

6

34" to 34-3/4"

Underside

of countertop

to floor

5 5

90°

Electrical

wiring on

right

Electrical

wiring is

3" from

cabinet

24

25-3/4

MAX.

21-1/2

3-1/4

4 (Adjustable)

34 MIN.

adj. to 35

24-3/4

23-3/8

Electrical Rating

Voltage AC............................................... 120

Hertz........................................................ 60

Total connected load amperage............. 8.6

Calrod

®

heater watts max................... 500

For use on adequately wired 120-volt, 15-amp circuit

having 2-wire service with a separate ground wire.

This appliance must be grounded for safe operation.

Note: Dishwasher must not be installed more than

10 feet from sink for proper drainage. All plumbing

and electrical work must be in accordance with

local codes. Dishwasher includes drain hose and

leveling legs.

Installation Information: Before installing, consult

installation instructions packed with product for

current dimensional data.

Dishwasher Dimensions (in inches)

As an ENERGY STAR

®

partner, GE has determined

that this product meets the

ENERGY STAR

guidelines

for energy efficiency.

Listed by

Underwriters

Laboratories

HDA3600/3640N – Hotpoint Built-In Dishwasher

Specification Created 4/07

450152

C

B

Access insert

Panel Thickness

Door insert

Front

of

Panel

Dishwashers Installation

(Pub. 1-G003 pg. 131B) May 12, 1993

Wood Insert Cut-Out Dimensions (in inches)

GE/Hotpoint/RCA

A

1-1/2

1/2

When using GPF325

1/4" custom dishwasher

door and access panel kit.

When using GPF375

3/4" custom dishwasher

door and access panel kit.

1/4

3/4

Panel

Thickness

Kit A B C

GPF32 5 18-7/8 " 23-9/16 " 3-11/16 " 1/4"

GPF375 18-15/ 16" 23-5 /8 "* 4-1/4" to

3-3/4 "**

3/4"

* Bot tom of panel must be not ched 1-1/2 " x 1/2" to clear acr oss panel

** Adjust ment required to ma tch ad jacen t cabinet f ronts due

to leveling leg adjus tment, 4" nominal