Horizon Fitness T95 User Manual

0 (0)

HZ SERIES

FOR MODEL :

T95

TREADMILL USER’S GUIDE

I N T R O D U C T I O N

CONGRATULATIONS and THANK YOU for your purchase of this Horizon Series treadmill!

Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Horizon Series treadmill can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics and innovative features you need to get stronger and healthier, faster. Because we're committed to designing fitness equipment from the inside out, we use only the highest quality components. It's a commitment we back with one of the strongest frame-to-motor warranty packages in the industry.

You want exercise equipment that offers the most comfort, the best reliability and the highest quality in its class.

The Horizon Series delivers.

TABLE OF CONTENTS

Important Precautions

4

 

 

Assembly

6

 

 

Before You Begin

11

 

 

Treadmill Operation

14

 

 

Conditioning Guidelines

20

 

 

Troubleshooting & Maintenance

27

 

 

Limited Warranty

30

CONTACT INFORMATION

Back Panel

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

LIMITED WARRANTY

IMPORTANT INTRODUCTION PRECAUTIONS

ASSEMBLY

BEFORE BEGIN YOU

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING MAINTENANCE & GUIDELINES

IMPORTANT PRECAUTIONS

SAVE THESE INSTRUCTIONS

Read all instructions before using this treadmill. When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the number listed on the back panel of this manual.

WARNING

Connect this exercise product to a properly grounded outlet only. See grounding

instructions.

GROUNDING INSTRUCTIONS

This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of

WARNING electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided

with the product. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 110-volt circuit and has a grounding plug that looks like the illustration below. This product must be used on a dedicated circuit. To determine if you are on a dedicated circuit, shut off the power to that circuit and observe if any other devices lose power. If so, move devices to a different circuit. Note: There are usually multiple outlets on one circuit. It is recommended that the treadmill be used with a 20 amp circuit for optimal performance.

3-Pole Grounded Outlet

GROUNDED

TREADMILL

POWER CORD

LIMITED WARRANTY

WARNING To reduce the risk of burns, fire, electrical shock or injury to persons:

Never use the treadmill before securing the safety tether clip to your clothing.

If you experience any kind of pain, including but not limited to chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.

Do not wear clothes that might catch on any part of the treadmill.

Always wear athletic shoes while using this equipment.

Do not jump on the treadmill.

Keep power cord away from heated surfaces.

Do not insert or drop any object into any opening.

Unplug treadmill before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE)

At no time should more than one person be on treadmill while in operation.

The treadmills should not be used by persons weighing more than 275 pounds. Failure to comply will void the warranty.

The treadmills are intended for in-home use only. Do not use this treadmill in any commercial, rental, school or institutional setting. Failure to comply will void the warranty.

Do not use treadmill in any location that is not temperature controlled, such as but not limited to garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.

Use the treadmill only as described in this manual.

At NO time should pets or children under the age of 12 be closer to the treadmill than 10 feet. At NO time should children under the age of 12 use the treadmill.

Children over the age of 12 should not use the treadmill without adult supervision.

other safety tips for your treadmill

OPERATION

WARNING To reduce the risk of damaging important components on your treadmill, it is strongly recommended that your treadmill is plugged into a dedicated 20 amp circuit, without the use of an additional extension cord and/or power strip. Failure to complay may void the warranty.

IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.

It is essential that your treadmill is used only indoors, in a climate controlled room. If your treadmill has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the treadmill is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

IMPORTANT INTRODUCTION PRECAUTIONS

ASSEMBLY

BEFORE BEGIN YOU

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING MAINTENANCE & GUIDELINES

A S S E M B LY

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

WARNING

During the assembly process of the treadmill there are several areas that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play in the console masts or any forward and back play in the console assembly or handlebars. If there is any play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side. Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!

Before proceeding, find your treadmill’s serial number and model name located to the left of the on/off power switch and power cord and enter it in the space provided below.

enter your serial number and model name in the boxes below:

SERIAL NUMBER:

MODEL NAME:

LIMITED WARRANTY

*Refer to the serial number and model name when calling for service.

*Also enter this serial number on your Warranty Card.

Horizon Fitness T95 User Manual

READING RACK

WATER BOTTLE HOLDER

GRIP PULSE HANDRAILS

ON/OFF SWITCH

CIRCUIT BREAKER

POWER CORD

SIDE RAIL

TRANSPORT WHEEL

CONSOLE

TOUCH PAD PANEL WITH LCD WINDOWS AND SPEED INCLINE INDICATORS

SAFETY KEY PLACEMENT

CONSOLE MAST

MOTOR COVER

FOOT LOCK LATCH

RUNNING BELT / RUNNING DECK

SIDE RAIL

ROLLER END CAP

REAR ROLLER ADJUSTMENT CAPS

TOOLS INCLUDED

5 mm Allen Wrench/Phillips Screw Driver

6 mm T-Wrench Flat Wrench

PARTS INCLUDED

1 Safety Key

1 Console Assembly

1 Power Cord

2 Hardware Bags

If you have questions or if there are any missing parts, contact Customer Tech Support. Contact information is located on the back panel of this manual.

For a complete exploded diagram, visit us at www.horizonfitness.com

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

IMPORTANT INTRODUCTION PRECAUTIONS

ASSEMBLY

BEFORE BEGIN YOU

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING MAINTENANCE & GUIDELINES

P R E - A S S E M B LY

DO NOT CUT STRAPS UNTIL STEP 1-E!* Disassemble box and remove the

WARNING cardboard packaging that is not beneath the treadmill. Do not attempt to lift the treadmill at this time. Remove plastic wrap from console masts.

note: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt. NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.

A S S E M B LY STEP 1

HARDWARE BAG 1 CONTENTS :

#0-5 "NN 2UZ

UPQ WJFX

UPRIGHT MAST

LEFT CONSOLE

MAST

BOLT A

LEFT SIDE LINKAGE ARM

AOpen HARDWARE BAG 1.

BLift left console mast into upright position. Be sure to hold the console mast firmly, as it will not stay in the upright position on it’s own.

CMove left side linkage arm into position. Insert bolt (A) and tighten.

DRepeat on the right side.

ENow cut the banding straps and remove remaining packaging material.*

*Note: If the straps have been removed before completing step 1-D and the linkage arms can not be aligned, refer to the troubleshooting section (page 26) in order to restore the treadmill to its proper position.

LIMITED WARRANTY

A S S E M B LY STEP 2

HARDWARE BAG 2 CONTENTS :

 

A

Open HARDWARE BAG 2.

 

 

 

BOLT (B)

 

 

 

B

With running deck in lowered

 

 

 

 

 

 

15 mm

 

 

 

Qty: 4

 

position, pull CONSOLE CABLE

 

 

 

 

 

 

 

 

 

through right side handlebar .

 

 

 

 

 

 

CONSOLE

CONSOLE CABLES

BOLTS (B)

UPRIGHT MAST

CSlide CONSOLE onto the top brackets of the upright masts.

DConnect CONSOLE CABLES, carefully tucking wires in masts to avoid damage.

ETo connect CONSOLE to

UPRIGHT MASTS, place 4 BOLTS

(B) into holes in CONSOLE

and tighten. Partially thread all bolts before completely tightening any one bolt.

* Be sure to tighten bolts after all are lined up.

* Note: Be careful not to pinch any wires while assembling the masts.

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

IMPORTANT INTRODUCTION PRECAUTIONS

ASSEMBLY

BEFORE BEGIN YOU

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING MAINTENANCE & GUIDELINES

ASSEMBLY STEP 3

 

 

 

 

Connect power plug to the treadmill

 

 

and connect the cord to a power

 

 

outlet. The on/off switch is located

 

 

next to the power cord. Flip this

POWER SWITCH

CIRCUIT BREAKER

switch to the 'ON' position, so that

the switch is lit. You will hear a beep

 

 

 

 

and the console will light up.

YOU’RE FINISHED!

LIMITED WARRANTY

10

Loading...
+ 22 hidden pages