Horizon Fitness CT9.1 User Manual

5 (1)

CT9.1

TREADMILL OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE DU TAPIS ROULANT

Read the treadmill guide before using this owner’s manual.

Lire le GUIDE D’UTILISATION DU TAPIS ROULANT avant de se servir du présent MANUEL DU PROPRIÉTAIRE.

3

ENGLISH

26

Français

2

ASSEMBLY

WARNING

There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.

Before proceeding, find your treadmill’s serial number located near the on/off power switch and power cord and enter it in the space provided below.

ENTER YOUR SERIAL NUMBER IN THE BOX BELOW:

SERIAL NUMBER:

MODEL NAME: Horizon CT9.1 TREADMILL

»Refer to the SERIAL NUMBER and MODEL NAME when calling for service.

»Be sure to enter both the SERIAL NUMBER and MODEL NAME on your warranty card.

3

READING RACK

SPEAKERS

WATER BOTTLE HOLDER

GRIP PULSE HANDRAILS

SPEED/INCLINE TOGGLES

ON/OFF SWITCH

CIRCUIT BREAKER

POWER CORD

TRANSPORT WHEEL

WHEEL LOCK

4

FOOT LOCK LATCH (UNDERNEATH DECK)

 

IPOD/MP3 PLAYER POCKET

TOUCH PAD PANEL AND DISPLAY WINDOWS

CONSOLE

CONSOLE FAN

SAFETY KEY PLACEMENT

CONSOLE MAST

MOTOR COVER

RUNNING BELT / RUNNING DECK

SIDE RAIL

ROLLER END CAP

REAR ROLLER

ADJUSTMENT BOLTS

TOOLS INCLUDED:

FF 6 mm T-Wrench

FF 5 mm T-Wrench

FF Screwdriver

PARTS INCLUDED:

FF 1 Console Assembly

FF 2 Console Masts

FF 2 Console Mast Caps

FF 2 Console Mast Boots

FF 2 Main Frame Boots

FF 4 Hardware Bags

FF 1 Safety Key

FF 1 Power Cord

FF 1 Audio Adapter Cable

FF 1 Bottle of Silicone Lubricant

(for 2 applications)

NEED HELP?

If you have questions or if there are any missing parts, contact Customer Tech Support. Contact information is located on the back panel of this manual.

PRE ASSEMBLY

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side. Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab hold of any portion of the incline frame and attempt to lift or move the treadmill.

WARNING

DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill from packaging until specified to do so in the assembly instructions. You may remove the plastic wrap from console masts.

WARNING

FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!

NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.

5

ASSEMBLY STEP 1

 

 

 

 

HARDWARE BAG 1 CONTENTS :

 

A

Cut the yellow banding straps and lift the

 

 

 

 

running deck upward to remove all contents

BOLT (A)

SPRING WASHER (B)

ARC WASHER (C)

 

from underneath the running deck.

20 mm

8.2 mm

8.2 mm

B

Open hardware bag 1.

Qty: 6

Qty: 6

Qty: 6

 

 

 

C

Slide main frame boot up console

 

LEAD WIRE

 

 

mast. Place right console mast over

 

 

 

main frame bracket.

 

 

 

 

 

 

 

D

Pull lead wire through right console

 

 

 

 

mast. After pulling the lead wire through

 

 

 

 

the mast, the top of the console cable

 

 

 

 

should be located at the top of the mast. Detach

 

 

 

 

and discard lead wire.

CONSOLE MAST

 

 

 

Note: Do not pinch console cable when

MAIN

 

 

 

placing the mast onto the main frame

 

 

 

bracket.

FRAME

 

 

 

BOOT

CONSOLE CABLE

 

 

 

 

 

E

Attach console mast to main frame

BOLTS (A)

 

 

 

bracket using 3 bolts (a), 3 spring

SPRING

 

 

 

washers (b) and 3 arc washers (c).

 

 

 

 

WASHERS (B)

 

 

F

Slide main frame boot down over main

ARC WASHERS (C)

 

 

 

 

 

frame bracket.

 

 

 

 

MAIN FRAME BRACKET

 

G

Repeat steps D–F on other side.

6

 

 

 

 

ASSEMBLY STEP 2

HARDWARE BAG 2 CONTENTS :

BOLT (E)

SPRING WASHER (B)

15 mm

8.2 mm

Qty: 4

Qty: 4

BOLTS (E)

SPRING WASHERS (B)

CONSOLE (UPSIDE DOWN)

CONSOLE MAST CAP

AOpen hardware bag 2.

BWith the CONSOLE upside down, attach the console mast caps to the console using 4 bolts (E) and 4 spring washers (b).

NOTE: The console mast caps are marked with an L if they are to be used on the left-hand side of the treadmill or an R if they are to be used on the righthand side of the treadmill. If the console mast caps are assembled on the incorrect side of the treadmill, the unit will not assemble correctly.

7

ASSEMBLY STEP 3

HARDWARE BAG 3 CONTENTS :

BOLT (A)

SPRING WASHER (B)

ARC WASHER (C)

20 mm

8.2 mm

8.2 mm

Qty: 4

Qty: 4

Qty: 4

ARC WASHERS (C)

 

SPRING WASHERS (B)

CONSOLE

BOLTS (A)

CONSOLE MAST BOOT

CONSOLE MAST

CONSOLE CABLES

 

AOpen hardware bag 3.

BSlide console through the console mast boots.

Note: Make sure the arrows on the mast rings are pointing upward towards the console when sliding into place.

CConnect console cables.

Note: Be careful not to pinch any wires while assembling the right console mast.

DConnect console to right console mast using 2 bolts (a), 2 spring washers (b) and 2 arc washers (c).

ERepeat on other side.

8

ASSEMBLY STEP 4

HARDWARE BAG 4 CONTENTS :

SCREW (D) 20 mm Qty: 4

AOpen hardware bag 4.

BAttach main frame boots using 4 screws (d).

SCREWS (D)

MAIN FRAME BOOT

YOU ARE FINISHED!

9

10

TREADMILL OPERATION

This section explains how to use your treadmill’s console and programming. The BASIC OPERATION section in the treadmill guide has instructions for the following:

LOCATION OF THE TREADMILL

Using the SAFETY KEY

FOLDING the treadmill

MOVING the treadmill

LEVELING the treadmill

TENSIONING­ THE RUNNING BELT

CENTERING THE RUNNING BELT

Using the HEART RATE function

11

Horizon Fitness CT9.1 User Manual

A

B

 

C

P

O

 

R

 

O

 

 

 

 

TIME

 

 

 

DISTANCE

 

DISTANCE

 

 

 

INCLINE

 

 

 

SPEED

CALORIES

 

 

 

HEART RATE

S

PERSONAL

LAST 5

WORKOUT

S

BEST

WORKOUTS

TOTALS

 

WORKOUT

 

 

STATS

 

 

H O L D TO R E S E T

 

 

F I T N E S S J O U R N A L S Y S T E M

 

WARNING!

AVERTISSEMENT

Attach safety key clip to clothing before starting. To avoid injury, stand on the side rails before

Attacher la pince de la clé de sécurité aux vêtements avant de commencer. Pour éviter toutes blessures, se tenir sur les

starting treadmill. Read and follow all instructions before operating. Keep children away from

ridelles avant de démarrer le tapis roulant. Avant usage, lire le Guide d’Utilisateur. Ne pas laisser cet équipement à la portée

this equipment. Remove safety key when not in use and store out of reach of children.

des enfants. Enlever la clé de sécurité lorsque le tapis roulant n’est pas utilisé et la ranger hors de la portée des enfants.

Consult a physician before using this equipment. Stop exercising if you feel pain, faint, dizzy

Consulter un médecin avant d’utiliser cet équipement. Arrêter d’utiliser l’appareil en cas de douleur, d’évanouissement, de

or short of breath. For Consumer Use only.

vertige ou d’essoufflement. Pour usage domestique uniquement.

 

 

 

 

 

 

 

 

 

 

CHANGE

 

 

 

 

 

 

 

 

 

 

 

 

 

DISPLAY

 

 

 

INCLINE

1

2

3

4

5

6

7

8

9

10

11

12

SPEED

SET

 

 

 

 

 

 

 

 

 

 

 

 

SET

 

 

 

S TART

 

 

 

 

S TOP

 

 

 

 

 

 

QUICK START

 

 

 

 

HOLD TO RESET

 

 

 

 

 

 

 

 

 

U

 

 

Q

 

 

 

N M J G I D

 

 

E F H K L T

12

CONSOLE OPERATION

Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use.

A)LED display windows: time, distance, calories, heart rate, speed and incline.

B)eTRAKLCD: displays ETRAKfitness journal information.

C)eTRAKcontrols: used to adjust ETRAKdisplay settings.

D)Start: press to begin exercising, start your workout, or resume exercising after pause.

E)Stop: press to pause/end your workout. Hold for 3 seconds to reset the console.

F)programming button: used to select program, level and time, and other options.

G)Incline / keys: used to adjust incline in small increments (0.5% Increments).

H)Speed + / - keys: used to adjust speed in small increments (0.1 MPH increments).

I)Speed/Incline Quick Keys: used to reach desired speed or incline more quickly. Press set incline key or set speed key to confirm.

J)Set incline key: used to confirm desired incline. Press after pressing a quick key number.

K)Set speed key: used to confirm desired speed. Press after pressing a quick key number.

L)Change display: press to change display feedback during workout.

M)Fan key: press to turn fan on and off.

N)Fan: personal workout fan.

O)Speakers: music plays through speakers when your CD / mp3 player is connected to the console.

P)Audio in jack: plug your CD / mp3 player into the console using the included audio adaptor cable.

Q)Audio out / headphone jack: plug your headphones into this jack to listen to your music through the headphones. Note: when headphones are plugged into the headphone jack the sound will no longer come out through the speakers.

R)MP3 player pocket: used to store your mp3 player.

S)Water bottle pockets: holds personal workout equipment.

T)Reading rack: holds reading material.

U)Safety key position: enables treadmill when safety key is inserted.

13

 

TIME

 

 

 

 

DISTANCE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DISTANCE

 

 

 

 

 

 

INCLINE

 

 

 

 

SPEED

 

CALORIES

 

 

 

 

HEART RATE

 

 

PERSONAL

 

LAST 5

WORKOUT

 

 

BEST

 

WORKOUTS

TOTALS

 

 

 

 

 

WORKOUT

 

 

 

 

 

 

 

STATS

 

 

 

 

 

 

 

H O L D TO R E S E T

 

 

F I T N E S S J O U R N A L S Y S T E M

Display windows

TIME: Shown as minutes : seconds. View the time remaining or the time elapsed in your workout.

DISTANCE: Shown as miles. Indicates distance traveled.

INCLINE: Shown as percent. Indicates the incline of your walking or running surface.

SPEED: Shown as MPH. Indicates how fast your walking or running surface is moving.

CALORIES: Total calories burned.

HEART RATE: Shown as BPM (beats per minute). Used to monitor your heart rate (displayed when contact is made with both pulse grips).

etrak™ LCD display: When ETRAKis activated, the ETRAKinformation is displayed in this window. Use the four buttons underneath the display to change display information. More information is on page 20.

14

GETTING STARTED

1)Check to make sure no objects are placed on the belt that will hinder the movement of the treadmill.

2)Plug in the power cord and turn the treadmill ON.

3)Stand on the side rails of the treadmill.

4)Attach the safety key clip to part of your clothing making sure that it is secure and will not become detached during operation.

5)Insert the safety key into the safety keyhole in the console.

6)You have two options to start your workout:

A)Quick start up

Simply press the START key to begin working out.

Time, distance, and calories will all count up from zero. OR...

B)SELECT A USER

use the programming button to select user 1, user 2 or guest and press enter.

C)Select a program

1)Use the programming button, arrow keys or number keys until you reach your desired program and press enter to confirm.

2)Use the programming button to complete the program setup by pressing up and down and enter to confirm.

3)When setup is complete, press start to begin your workout.

Finishing your workout

When your workout is complete, the console will display “workout complete” and beep. Your workout information will stay displayed on the console for 30-45 seconds and then reset.

Date and clock setup

1)Enter Setup mode: Press and hold the 1 and 2 buttons for 3-5 seconds.

2)Use the arrow keys to change settings and press enter to confirm.

3)Settings include: Month, day, year, hour, minute, and am/pm.

4)Review settings: You can review your settings at any time while in setup mode. Press enter to scroll through settings.

5)Exit setup mode: To confirm the date and time, press and hold enter for 3 seconds.

6)To reset: simply re-enter setup mode and adjust date and time to the correct setting.

To reset the console

Hold stop key for 3 seconds.

15

PROGRAM INFORMATION

1) Manual: Allows ‘on the fly’ manual speed and incline changes.

2)SPEED intervals: Improves your strength, speed and endurance by increasing and decreasing the speed throughout your workout to involve your heart and other muscles. Speed changes and segments repeat 90 seconds and 30 seconds.

3)PEAK intervals: Improves your strength, speed and endurance by increasing and decreasing the speed and incline throughout your workout to involve your heart and

other muscles. Speed and Incline changes, segments repeat 90 seconds and 30 seconds.

Segment

 

Warm Up

 

 

1

 

2

 

Cool Down

Time

 

 

4:00 min

 

 

90 sec

 

30 sec

 

4:00 min

Level 1

 

1.0

 

 

1.5

 

 

2.0

 

4.0

 

1.5

 

1.0

Level 2

 

1.0

 

 

1.5

 

 

2.0

 

4.5

 

1.5

 

1.0

Level 3

 

1.3

 

 

1.9

 

 

2.5

 

5.0

 

1.9

 

1.3

Level 4

 

1.3

 

 

1.9

 

 

2.5

 

5.5

 

1.9

 

1.3

Level 5

 

1.5

 

 

2.3

 

 

3.0

 

6.0

 

2.3

 

1.5

Level 6

 

1.5

 

 

2.3

 

 

3.0

 

6.5

 

2.3

 

1.5

Level 7

 

1.8

 

 

2.6

 

 

3.5

 

7.0

 

2.6

 

1.8

Level 8

 

1.8

 

 

2.6

 

 

3.5

 

7.5

 

2.6

 

1.8

Level 9

 

2.0

 

 

3.0

 

 

4.0

 

8.0

 

3.0

 

2.0

Level 10

 

2.0

 

 

3.0

 

 

4.0

 

8.5

 

3.0

 

2.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Segment

 

 

Warm Up

 

1

 

 

2

 

Cool Down

Time

 

 

 

 

4:00 min

 

 

 

90 sec

 

30 sec

 

4:00 min

Level 1

 

Speed

 

1.0

 

1.5

 

2.0

 

4.0

 

1.5

 

1.0

 

Incline

 

1.0

 

1.5

 

0.5

 

1.5

 

1.5

 

 

0.0

 

 

 

 

 

 

 

 

Level 2

 

Speed

 

1.0

 

1.5

 

2.0

 

4.5

 

1.5

 

 

1.0

 

Incline

 

1.5

 

2.5

 

3.0

 

6.5

 

2.5

 

 

1.5

 

 

 

 

 

 

 

 

Level 3

 

Speed

 

1.3

 

1.9

 

2.5

 

5.0

 

1.9

 

 

1.3

 

Incline

 

2.0

 

3.0

 

4.0

 

7.5

 

3.0

 

 

2.0

 

 

 

 

 

 

 

 

Level 4

 

Speed

 

1.3

 

1.9

 

2.5

 

5.5

 

1.9

 

 

1.3

 

Incline

 

2.0

 

3.0

 

4.0

 

8.0

 

3.0

 

 

2.0

 

 

 

 

 

 

 

 

Level 5

 

Speed

 

1.5

 

2.3

 

3.0

 

6.0

 

2.3

 

 

1.5

 

Incline

 

2.5

 

3.5

 

4.5

 

8.5

 

3.5

 

 

2.5

 

 

 

 

 

 

 

 

Level 6

 

Speed

 

1.5

 

2.3

 

3.0

 

6.5

 

2.3

 

 

1.5

 

Incline

 

2.5

 

3.5

 

4.5

 

9.0

 

3.5

 

 

2.5

 

 

 

 

 

 

 

 

Level 7

 

Speed

 

1.8

 

2.6

 

3.5

 

7.0

 

2.6

 

 

1.8

 

Incline

 

2.5

 

4.0

 

5.5

 

9.5

 

4.0

 

 

3.0

 

 

 

 

 

 

 

 

Level 8

 

Speed

 

1.8

 

2.6

 

3.5

 

7.5

 

2.6

 

 

1.8

 

Incline

 

3.0

 

4.0

 

5.5

 

9.5

 

4.0

 

 

3.0

 

 

 

 

 

 

 

 

Level 9

 

Speed

 

2.0

 

3.0

 

4.0

 

8.0

 

3.0

 

 

2.0

 

Incline

 

3.0

 

4.5

 

6.0

 

10.0

5.0

 

 

3.0

 

 

 

 

 

 

 

Level 10

 

Speed

 

2.0

 

3.0

 

4.0

 

8.5

 

3.0

 

 

2.0

 

Incline

 

3.0

 

4.5

 

6.0

 

10.0

5.0

 

 

3.0

 

 

 

 

 

 

 

16

Loading...
+ 36 hidden pages