CLUB SERIES
FOR MODELS :
CSE3.6
CSE4.6
E L L I P T I C A L USER’S GUIDE
I N T R O D U C T I O N
CONGRATULATIONS and THANK YOU for your purchase of this Club Series elliptical!
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Club Series elliptical can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics and innovative features you need to get stronger and healthier, faster. Because we're committed to designing fitness equipment from the inside out, we use only the highest quality components. It's a commitment we back with one of the strongest frame-to-brake warranty packages in the industry.
You want exercise equipment that offers the most comfort, the best reliability and the highest quality in its class.
The Club Series delivers.
TABLE OF CONTENTS
Important Precautions |
4 |
|
|
|
|
|
|
Assembly |
5 |
|
|
|
|
|
|
Before You Begin |
17 |
|
|
|
|
|
|
Elliptical Operation |
18 |
|
|
|
|
|
|
Conditioning Guidelines |
31 |
|
|
|
|
|
|
Troubleshooting & Maintenance |
35 |
|
|
|
|
|
|
Limited Warranty |
39 |
|
|
CONTACT INFORMATION |
Back Panel |
|
|
|
|
|
|
|
|
|
|
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES
IMPORTANT INTRODUCTION PRECAUTIONS
ASSEMBLY
BEFORE BEGIN YOU
ELLIPTICAL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY MAINTENANCE & GUIDELINES
IMPORTANT PRECAUTIONS
SAVE THESE INSTRUCTIONS
Read all instructions before using this elliptical. When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this elliptical. It is the responsibility of the owner to ensure that all users of this elliptical are adequately informed of all warnings and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the number listed on the back panel of this manual.
WARNING To reduce the risk of burns, fire, electrical shock or injury to persons:
•If you experience any kind of pain, including, but not limited to chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.
•Maintain a comfortable pace. Do not sprint above 80 rpms on this machine.
•To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or dismounting the machine.
•Do not wear clothes that might catch on any part of the elliptical.
•Do not turn pedal arms by hand.
•Make sure handlebars are secure before each use.
•Do not insert or drop any object into any opening.
•Unplug elliptical before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE)
•This elliptical should not be used by persons weighing more than 275 pounds on the CSE3.6 and 300 pounds on the CSE4.6. Failure to comply will void the warranty.
•This elliptical is intended for in-home use only. Do not use this elliptical in any commercial, rental, school or institutional setting. Failure to comply will void the warranty.
•Do not use elliptical in any location that is not temperature controlled, such as but not limited to garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.
•Use the elliptical only as described in this manual.
At NO time should pets or children under the age of 12 be closer to the elliptical than 10 feet. At NO time should children under the age of 12 use the elliptical.
Children over the age of 12 should not use the elliptical without adult supervision.
It is essential that your elliptical is used only indoors, in a climate controlled room. If your elliptical has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the elliptical is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.
A S S E M B LY
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
WARNING
There are several areas during the assembly process of a elliptical that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical, the assembly instructions must be reviewed and corrective actions should be taken.
UNPACKING
Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended that you place a protective covering on your floor. During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.
Before proceeding, find your elliptical’s serial number located on the front stabilizer tube and enter it in the space provided below. Also locate the model name which is located on the side cover badge.
enter your serial number and model name in the boxes below:
SERIAL NUMBER:
MODEL NAME:
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
*Refer to the serial number and model name when calling for service.
*Also enter this serial number on your Warranty Card.
LIMITED WARRANTY
IMPORTANT INTRODUCTION PRECAUTIONS
ASSEMBLY
BEFORE BEGIN YOU
ELLIPTICAL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY MAINTENANCE & GUIDELINES
GRIP PULSE
CONSOLE MAST
ACCESSORY TRAY
TOP COVERS
PIVOTING FOOT PAD
PEDAL ARM
HAND GRIPS (CSE4.6 only)
|
4 |
8 |
|
2 |
|
12 |
|
|
6 |
10 |
|
|
|
|
CONSOLE (CSE4.6 shown)
UPPER HANDLEBAR
MAIN FRAME |
LOWER HANDLEBAR |
LOWER LINK ARM
FRONT STABILIZER TUBE
TOOLS INCLUDED |
|
PARTS INCLUDED |
|
|
|
c5mm Allen Wrench
c6mm Allen Wrench
cPhillips Screw Driver
c13/15mm Flat Wrench
c 1 Console |
c 6 Hardware Bags |
||
c 1 |
Console Mast |
c 1 |
Accessory Tray |
c 1 |
Front Stabilizer Tube |
c 3 |
Stabilizer Covers |
c 2 |
Upper Handlebars |
c 2 |
Handlebar Covers |
c 2 |
Lower Handlebars |
c 2 |
Elbow Covers |
c2 Lower Link Arms
c2 Pivoting Foot Pads
c2 Top Side Covers
c1 HORIZON FITNESS
12-volt Power Supply
If you have questions or if there are any missing parts, contact Customer Tech Support. Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
A S S E M B LY STEP 1
."*/ '3".&
#0-5 "
8"4)&3 # 8"4)&3 $
'30/5 45"#*-*;&3 56#&
A)Open HARDWARE BAG FOR STEP 1.
B)Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 WASHERS (B) and 2 WASHERS (C).
HARDWARE BAG FOR STEP 1 CONTENTS : |
|
|
|||
|
|
|
#0-5 " |
413*/( 8"4)&3 # |
'-"5 8"4)&3 $ |
|
|
|
|||
|
|
|
|||
|
|
|
NN |
NN |
NN |
|
|
|
2UZ |
2UZ |
2UZ |
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
LIMITED WARRANTY
IMPORTANT INTRODUCTION PRECAUTIONS
ASSEMBLY
BEFORE BEGIN YOU
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING MAINTENANCE & GUIDELINES
A S S E M B LY STEP 2
BOLT (A) |
CONSOLE MAST |
SPRING WASHER (B) |
|
FLAT WASHER (C) |
|
CONSOLE
MAST
GROMMET
CONSOLE WIRES
MAIN FRAME
A)Open HARDWARE BAG FOR STEP 2.
B)Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
C)Attach the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT WASHERS (C).
HARDWARE BAG FOR STEP 2 CONTENTS : |
|
|
BOLT (A) |
SPRING WASHER (B) |
FLAT WASHER (C) |
20 mm |
18 mm |
20 mm |
Qty: 4 |
Qty: 4 |
Qty: 4 |
SCREW (K) |
|
|
10 mm |
|
|
Qty: 2 |
|
|
LIMITED WARRANTY
A S S E M B LY STEP 2 B
CONSOLE
MAST
GROMMET
SCREWS (K)
ACCESSORY TRAY |
|
MAIN FRAME |
TOP SIDE COVERS |
D)Insert the left TOP SIDE COVER, followed by the right TOP SIDE COVER and snap them together.
E)Insert ACCESSORY TRAY and secure it using 2 SCREWS (K) as shown.
F)Slide CONSOLE MAST GROMMET down to seal the console mast hole.
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
LIMITED WARRANTY
IMPORTANT INTRODUCTION PRECAUTIONS
ASSEMBLY
BEFORE BEGIN YOU
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING MAINTENANCE & GUIDELINES
A S S E M B LY STEP 3
SCREWS (M)
FRONT STABILIZER COVER
REAR STABILIZER COVER
BOLTS (L)
A)Open HARDWARE BAG FOR STEP 3.
B)Attach REAR STABILIZER COVER using 2 BOLT (L).
C)Attach FRONT STABILIZER COVERS using 4 SCREWS (M).
HARDWARE BAG FOR STEP 3 CONTENTS :
BOLT (L) |
SCREW (M) |
20 mm |
10 mm |
Qty: 2 |
Qty: 4 |
LIMITED WARRANTY
10
A S S E M B LY STEP 4
UPPER HANDLEBAR
|
NOTCH |
|
|
|
PRE-ATTACHED |
CONSOLE MAST |
TAB |
SET SCREWS |
PRE-ATTACHED
BOLT & WASHER
LOWER HANDLEBAR
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A)Remove PRE-ATTACHED BOLT & WASHERS from CONSOLE MAST.
B)Slide LOWER HANDLEBARS onto CONSOLE MAST and attach by re-inserting PRE-ATTACHED BOLT & WASHERS.
C)Slide UPPER HANDLEBARS onto LOWER HANDLEBARS and align NOTCH with TAB making sure handlebars are joined together completely. Secure UPPER HANDLEBARS to LOWER HANDLEBARS using PRE-ATTACHED SET SCREWS.
|
|
After handlebars are assembled they will rotate freely – be cautious. Until the |
|
WARNING |
|
|
machine is fully assembled, do not grab the handlebars for support. |
|
|
|
|
|
|
|
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
11
LIMITED WARRANTY
IMPORTANT INTRODUCTION PRECAUTIONS
ASSEMBLY
BEFORE BEGIN YOU
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING MAINTENANCE & GUIDELINES
A S S E M B LY STEP 5
UPPER HANDLEBAR
HANDLEBAR
COVERS
NOTE: There is NO hardware bag for this step.
A)Snap the front and back HANDLEBAR COVERS together onto the UPPER HANDLE BARS. Note the position of the snap tabs on the covers before snapping into position.
B)Repeat on other side.
LIMITED WARRANTY
12