WindTunnel™ by HOOVER
Congratulations on your purchase!
®
This WindTunnel™ vacuum cleaner uses HOOVER® HEPA Filtration Type “Y” filter bags
This product was designed for easy assembly (See page 3)
www.hoover.com
Owner’s Manual |
|
Review this manual before |
ENGLISH pp.1-12 |
|
operating cleaner |
ESPAÑOL pág. 13-20 |
|
|
|
|
|
FRANÇAIS p. 21-28 |
|
|
|
|
|
Fill in and retain
The model and serial number are located on the bottom of the cleaner as shown.
For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information.
Your cleaner is model___________________________________
and has serial number___________________________________
It is suggested that you attach your sales receipt to this owner’s manual. Verification of date of purchase may be required for warranty service of your HOOVER product.
Be sure to fill out and return the product registration card included with your cleaner.
|
X |
XXXXXXXXXXX |
SERIAL |
|
|
NUMBER |
XXXXXXXXXXXX |
|
Index |
|
Assembling Cleaner .......................... |
3-5 |
Carton Contents.................................... |
3 |
Cleaner Descriptions ............................ |
5 |
How To Use ........................................ |
5-8 |
Embedded Dirt FINDER™ Feature ..6 |
|
Cleaning Tools................................ |
7-8 |
If You Have a Problem ........................ |
12 |
Important Safeguards .......................... |
2 |
Lubrication .......................................... |
11 |
Maintenance |
|
Authorized Service .......................... |
11 |
Cleaning Filters ................................ |
9 |
Clearing Blockages ........................ |
12 |
Replacing Agitator Brush Roll ...... |
11 |
Replacing Belt ................................ |
10 |
Replacing Edge Groomers ............ |
11 |
Replacing Headlight........................ |
10 |
Replacing Filter Bag ........................ |
9 |
Thermal Protector .............................. |
11 |
Warranty .............................................. |
12 |
© 2001 The Hoover Company www.hoover.com
Important Safeguards!
When using an electrical appliance, always follow basic precautions, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
Warning:To reduce the risk of fire, electric shock, or injury:
•Do not use outdoors or on wet surfaces.
•Close supervision is necessary when any appliance is used by or near children. Do not allow vacuum cleaner to be used as a toy or to run unattended at any time.
•Keep hair, loose clothing, fingers, feet and all parts of body away from openings, rotating agitator and other moving parts. Do not operate cleaner in bare feet or when wearing open toe shoes or sandals.
•Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
•Do not use to pick up flammable or combustible materials such as gasoline or fine wood sandings or use in areas where they may be present.
•Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner and the bag.
•Always turn off this appliance before connecting or disconnecting hose.
•Do not use without dust bag or filters in place. Change bag frequently when picking up very fine materials such as powder.
•Use extra care when cleaning on stairs.
•Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, or anything that may reduce air flow.
•Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
•Always disconnect cord from electrical outlet before servicing the cleaner.
•Unplug cleaner when not in use. Turn off all controls before unplugging.
•Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never handle plug or appliance with wet hands.
•The use of an extension cord is not recommended.
•Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot).
•Use vacuum cleaner only for its intended use as described in the instructions. Use only attachments recommended by The Hoover Company; others may cause hazards.
Save these instructions!
2
1. Assembling cleanerNot
This cleaner was inspected and packaged carefully before being shipped from the factory. If you should happen to need assistance during assembly or operation,
Visit us online at www.hoover.com to find the service outlet nearest you (click on the “Service” button) OR
Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR
Call 1-330-499-9499 to speak with a representative in our Consumer Response Center.
Carton contents
1-1 |
|
C |
D |
A |
|
B |
|
|
E |
Remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packing.
A.Handle section
B.Cleaner body
C.Hose rack
D.Hose, cleaning tools and wands
E.Handle bolts and nuts packet
(in bag with owner’s manual)
Note: The white switch lock above the ON/OFF switch aids in the assembly of your cleaner. Assembly can be continued if the switch lock is missing. However, do not remove the switch lock until assembly is completed.
STEP 1 Attach rack and handle
1-2 |
A |
Open tool cover on handle section
(A).
1-3 B
C
Attach hose rack to handle section by fitting hooks (B) on rack over slots (C) on handle section.
1-4 |
Align hole on rack with circular tab on handle.
Continued 3
1-5 |
A |
1-6 |
1-7 |
Remove bag door on cleaner body by pushing down at top of door and pulling door outward.
Switch (A) above bag door should be in OFF position.
While holding rack in place, slide handle onto cleaner body.
Make sure tab is inserted fully into slot.
Push bolts into holes on back of handle.
1-8 |
1-9 |
1-10 |
Place nuts in recessed areas on front of handle. Hold each nut in place while tightening each bolt securely with a Phillips screw driver.
Reposition bag door by fitting tabs on bottom of door into opening. Press top of door to snap securely shut.
Press cord into the 3 notches and the clip as shown.
STEP II Attach hose
1-11
A
B 
Align end of hose with projections
(A) over slots (B) in dirt duct.
NOTE: Hose must be connected as shown for all operations.
1-12 |
C |
1-13
D 
E
Slide hose into (B) and twist hose to |
Position hose over rack and into |
lock it into place. |
hose tube (D) or (E) (depening on |
Lift hose tube cover (C). |
your model). |
4
Loading...